The growth of the Internet of Things and the large volumes for chips is
creating new interest in developing custom chips for embedded applications, and
two of the largest tool providers are going head to head with a low cost design
flow.
While ARM is offering its M0 processor core free to evaluate (and a lower cost $40,000 commercial license), the challenge is developing a mixed signal analogue and digital
chip. While Cadence Design Systems has traditionally dominated the analogue portion
of the chip design flow, Mentor Graphics recently bought the analogue and MEMS
design tools of Tanner, providing a competing flow.
The custom chips can be produced at relatively low cost as
part of a 180nm multi-project wafer from a supplier such as Europractice which
can provide 45 samples of a 25mm2 chip for $16,000. With a relatively small production run of 100,000 chips, this NRE engineering cost becomes quite affordable.
The Cadence offering accelerates mixed-signal SoC design for
IoT, incorporating the ARM IoT Subsystem for Cortex-M processors and Cadence’s
interface IP and unified mixed-signal implementation solution, now optimized
specifically for Cortex-M cores. The design flow
integrates the Virtuoso custom design platform with the Innovus Implementation
System, and the Spectre custom verification platform with the Incisive
Enterprise Simulator provides the basis for ARM-based IoT design and verification.
These tools are not cheap, so further lower the barriers to the
chip development, Cadence has also joined the ARM DesignStart program to
provide low cost tools and IP for designs incorporating the Cortex-M0 processor.
This offers potential chip designers access to free Cortex-M0 processor IP for
design, simulation, and prototyping, with the option of then purchasing a
simplified fast-track license for commercialization.
The ARM IoT Subsystem and DesignStart packages provide the
most comprehensive solution a designer may need – including tools and IP – to
accelerate time-to-silicon for their IoT applications. The combined
mixed-signal IoT flow for both the IoT subsystem package and DesignStart are
available on the Cadence Hosted Design Solution (HDS), a software-as-a-service
(SaaS) model which offers quick access to EDA tools, support and methodologies.
With this secure solution, users can log in anywhere, anytime and gain access
to tools without needing installation or the supporting hardware for it.
Optimizing IoT system design requires a deep understanding of tool flows, methodology, IP, packaging and software. ARM has developed a test chip to showcase this complete IoT implementation using a complete Cadence tool flow, the ARM IoT Subsystem and Cadence IP. The test chip includes processor IP, Artisan physical IP, wireless connectivity solutions, interface IP, software, design tools (both front- and back-end), optimized design methodology and scripts.
“ARM is seeing a growing demand for custom SoCs as our partners continue to focus on improving costs, power and functionality,” said Vincent Korstanje, vice president of marketing, systems & software group at ARM. “The collaboration with Cadence makes designing IoT platforms and custom SoCs even easier, further accelerating time to market.”
“We are collaborating with ARM to provide a complete solution of optimized IP, tool flows and subsystems to enable customers to deliver emerging Internet of Things applications,” said Dr. Chi-Ping Hsu, senior vice president and chief strategy officer, Cadence. “Through our continued collaboration with ARM on both ARM DesignStart and the ARM IoT Subsystem for Cortex-M, we’ve optimized our EDA tools and methodology to complement ARM IP to bring designers from concept to silicon much faster.”
Optimizing IoT system design requires a deep understanding of tool flows, methodology, IP, packaging and software. ARM has developed a test chip to showcase this complete IoT implementation using a complete Cadence tool flow, the ARM IoT Subsystem and Cadence IP. The test chip includes processor IP, Artisan physical IP, wireless connectivity solutions, interface IP, software, design tools (both front- and back-end), optimized design methodology and scripts.
“ARM is seeing a growing demand for custom SoCs as our partners continue to focus on improving costs, power and functionality,” said Vincent Korstanje, vice president of marketing, systems & software group at ARM. “The collaboration with Cadence makes designing IoT platforms and custom SoCs even easier, further accelerating time to market.”
“We are collaborating with ARM to provide a complete solution of optimized IP, tool flows and subsystems to enable customers to deliver emerging Internet of Things applications,” said Dr. Chi-Ping Hsu, senior vice president and chief strategy officer, Cadence. “Through our continued collaboration with ARM on both ARM DesignStart and the ARM IoT Subsystem for Cortex-M, we’ve optimized our EDA tools and methodology to complement ARM IP to bring designers from concept to silicon much faster.”
But Mentor is also joining the party through a similar
collaboration using the Tanner AMS analogue/mixed-signal design flow for M0
processor-based implementations as part of the DesignStart program. The
collaboration lowers the barriers to embedded and IoT device design and verification
through a combination of an affordable, complete IC design tool suite and the
ability to evaluate the design flow on a reference design at no cost.
“The free evaluation environment and an affordable tool
suite from Tanner gives any vendor a fast and effective way to develop Cortex-M0
based smart analog mixed-signal designs,” said Nandan Nayampally, vice
president of marketing and strategy, CPU Group at ARM. “Our partnership with Mentor Graphics
will streamline the path to full production of IoT and embedded products,
reducing developers’ costs and increasing their speed to market.”
The Tanner
design flow supports digital, analogue, AMS, and MEMS design in a highly
integrated, end-to-end flow. Designers capture the schematic, perform analogue
and mixed-signal simulation, and lay out and verify the physical design. This
design flow offers a complete, processor-based IoT chip environment.
Designers will be able to evaluate an ARM Cortex-M0 IoT
reference design at no cost by using a web-based Mentor Virtual Lab
to interact with the complete set of Tanner design tools. After evaluation,
customers can easily purchase the specially-priced software from Tanner to
begin creating their own IoT designs and combine this with the free Cortex-M0
design access available on the ARM DesignStart portal.
“The Tanner design flow is already very popular with IoT
design companies,” said Greg Lebsack, general manager of the Tanner EDA
business unit at Mentor Graphics. “By collaborating with ARM on
DesignStart, we further strengthen our design flow by making it easy for AMS
designers to include an ARM Cortex-M0 processor in their IoT designs.”
ARM of course wants to have more and more chip suppliers in
the IoT. The new ARM Approved Design Partner program also provides
DesignStart users with a global list of audited design houses for expert
support during development.
The DesignStart portal offers SoC designers free access to
ARM Cortex-M0 processor IP for design, simulation and prototyping with the
option to buy a simplified and standardized $40,000 fast track license. The
addition of Cadence and Mentor Graphics tools for DesignStart users
accelerates the development of custom SoCs for embedded and Internet of Things
(IoT) applications. With test chips from as little as $16,000 to manufacture (not
inclusive of EDA tooling and IP licensing costs), the path to custom SoCs is
now much easier.
“ARM’s DesignStart
portal, with its convenient access to the Cortex-M0 package and its
low-cost path to commercialization, is already making it easier for start-ups
and OEMs to create embedded and mixed-signal SoCs,” said Nandan Nayampally,
vice president of marketing and strategy for the CPU group at ARM. “Simplifying
access to EDA tools from Cadence and Mentor Graphics will further
spur rapid innovation, creating a fast path to production silicon for companies
looking to deliver an embedded or connected IoT product.”
The Approved Design Partner program helps designers with the
chip implementation. “The semiconductor industry has high expectations for
future growth in the IoT space, with DesignStart ARM has taken a significant
step towards enabling this growth and lowering entry barriers,” said Graham
Curren, CEO at one design partner, Sondrel.
