All the latest quantum computer articles

See the latest stories on quantum computing from eeNews Europe
Showing posts with label module. Show all posts
Showing posts with label module. Show all posts

Wednesday, September 07, 2016

Infineon teams with Mocana for network security

By Nick Flaherty www.flaherty.co.uk


Infineon Technologies has teamed up with US security software specialist Mocana to integrate support for its Optiga TPM (Trusted Platform Module) security controller as a standard feature into Mocana's latest 'Security of Things' Platform.


Developers who choose Mocana’s platform for smart factories, infrastructure, automotive and other security-critical IoT designs can now quickly and easily integrate hardware protection into their devices. In addition, millions of IoT devices that already incorporate OPTIGA TPMs from market leader Infineon could benefit from the advanced security features offered by the Mocana software platform.
The Mocana Security of Things Platform secures multiple aspects of connected devices through services such as pre-boot verification, certificate management, cryptographic engines, secured data transport and secured firmware updates. The platform with integrated support for the OPTIGA TPM family will be available in Q4 2016.
OPTIGA TPMs are standalone security controllers based on the international standards of the Trusted Computing Group (TCG). TPMs protect integrity and authenticity of embedded systems by implementing advanced cryptographic algorithms in hardware. These established devices have been used successfully to provide security in PCs for over 15 years and are increasingly included into different embedded systems as a secure area for holding encryption keys. 
“We are very excited that Mocana’s software is compatible with Infineon’s OPTIGA TPM 1.2 chips,” said Dean Weber, CTO at Mocana. “We believe this technology will advance Mocana further as a leader in the embedded security space, being one of the few companies that offer security down to the root of trust, which ensures that IP connected devices and the data they provide can be safe and trusted”.
“Developers can rely on solutions with Infineon’s proven hardware and Mocana’s established software,” said Joerg Borchert, Vice President of the Chip Card & Security Division at Infineon Technologies Americas Corp. “Thus, they can quickly and easily bring to market products and systems that provide the highly advanced levels of protection that these applications demand”.

Wednesday, August 24, 2016

Telit speeds up LTE for IoT with new series of single mode modules

By Nick Flaherty www.flaherty.co.uk

Telit has launched a series of five dedicated single-mode LTE modules for the Internet of Things (IoT).

The IoT-optimized LTE modules are compliant with the newly approved Release 13 standard set by the 3GPP, the collaborative standard setting body for cellular technology. They will begin sampling later this year with commercial availability set for early 2017 to meet US operator launch schedules.
Cat M1 and NB1 standards were devised to address specific needs of IoT applications, offering optimized power consumption and enhanced coverage. The new portfolio is being fast-tracked to address the pressing need in the US market for migration paths away from 2G as well as strong global demand from the industry for Cat M1 and NB1 modules to enable of a wide variety of brand new product concepts.

The new LTE UE Category M1 modules offer peak downlink and uplink data rates of 1Mbps. This generation of enhanced machine type communication (eMTC) products support power saving mode and extended discontinuous reception (EDRX), which together allow the module to wake up periodically, exchange small amounts of data with the network and return to sleep, providing for years of battery life. The NE866 for the European market is a 3GPP Release13 eMTC product capable of delivering long battery life of ten years or more while offering peak data rates of 250Kbps downlink and 20Kbps uplink.

  • Two ME910 LTE UE Category M1 cover major US mobile operators
  • Two ME866 LTE UE Category M1 cover major US mobile operators
  • One NE866 LTE UE Category NB1 for the European market
The ME910 modules are optimized in cost, size and power consumption to be applied as direct drop-in replacements in devices already designed for the GE910, CE910, UE910 and HE910. They are part of the popular xE910 form factor, the company’s most versatile and comprehensive product family and the only in the market to include the full range of cellular technologies (GPRS, UMTS, HSPA, CDMA, EV-DO and LTE CAT-x). ME866 and NE866 modules are drop in replacements for 2G and 3G members of the 15mmx25mm and 15mmx19mm xE866 miniature IoT module family, ideal for devices with stringent size constraints. Dual-mode variants of the xE910 M1 family are planned for release in short succession to address regional requirements like GPRS fallback for Europe and Voice over LTE (VoLTE) for North America.

“Our customers and new IoT adopters already understand the different benefits Release 13 brings and are therefore looking for a complete portfolio of compliant modules, rather than a single product from module vendors claiming to be pioneering the new 3GPP standard. For starters, the standard includes two branches: M1 and NB1. Then, when you add to that, the fact that the NB1 specification allows for three different deployment scenarios which are not directly compatible with one another, you start to see the multitude of possibilities,” said Mike Ueland, President of Telit Americas. “What all this means is that in order to ensure you retain the device deployment flexibility you enjoyed with LTE Cat 1, for example, we are announcing a broad portfolio of Cat M modules here today.”

The modules use software from deviceWISE to make it easy to add them to a network and send data to the cloud, customer apps, back-end systems and servers. 

Friday, July 22, 2016

LoRa module shrinks in size for the IoT

By Nick Flaherty www.flaherty.co.uk

Murata has launched a a compact standalone module that can easily connect devices to the Internet of things (IoT) via a LoRaWAN low power sub-GHz network.

The standalone compact module measures just 12.5 x 11.6 x 1.76 mm, is constructed in a metal shielded package and combines a Semtech SX1276 ultra long range spread spectrum wireless transceiver and an STMicro STM32L0 series ARM Cortex M0+ 32 bit microcontroller (MCU). An integrated TCXO that has robust low drift thermal characteristics provides an accurate clock source for the RF transceiver.


Communication with the module can be achieved via UART, SPI, or I2C peripheral interfaces. An ADC and up to 18 GPIOs provide plenty of flexibility for connecting sensors, switches and status LEDs, and the module is powered from a 2.2 to 3.6 VDC supply. The module has pre-certified radio regulatory approvals for operating in the 868 and 915 MHz industrial, scientific and medical (ISM) spectrum in most geographical regions of the world, making it easy to add to a design. Typical applications include smart metering, wearables, tracking, M2M and internet of things (IoT) edge nodes as the module can operate from – 40 to + 85 degrees C.

The normal output power is + 14 dBm but a power amplifier (PA) boost function can be selected to increase RF output to + 20dBm for long range applications or those where the end-device is sited in a poor signal location indoors.

The MCU includes 192 kB flash and 20 kB RAM, and has enough memory to embed customer applications and host other modulation stacks. In addition, an optional STSAFE secure element can be incorporated into the MCU to enhance the network security capabilities.

"We're excited to welcome a leader in wireless modules such as Murata into the LoRa ecosystem," said Marc Pegulu, Vice President and General Manager of Semtech’s Wireless and Sensing Product Group. "Since Murata joined the LoRa Alliance, our teams have worked together to design a cost-effective, small form factor LoRaWAN module capable of supporting a wide range of sensors. We are confident Murata's new wireless module should help increase the adoption of the LoRaWAN platform worldwide, helping to make it the standard for LPWANs supporting low power IoT applications."

Mass production of the CMWX1ZZABZ-078 module will commence in October 2016.

Saturday, February 13, 2016

u-blox backs 2.4GHz WiFi for IoT despite challenges

By Nick Flaherty www.flaherty.co.uk


Swiss module and chip developer u-blox has launched a compact single band 802.11n 2.4 GHz Wi-Fi transceiver module aimed directly at applications in the Internet of Things. The module measures just 10 x 14 mm and is suitable for providing Wi-Fi connectivity to an increasingly broad range of industrial and commercial products with LTE connectivity as it has an LTE filter included.

Despite Cisco and Apple regarding the 2.4GHz band as too full for reliable IoT links, and Broadcom making different module choices, u-blox is optimistic for its LILY-W1 module as it simplifies the integrator's RF design efforts with an integrated antenna and enables Wi-Fi in-device co-existence with LTE thanks to a bulk acoustic wave filter. Suiting today's space constrained designs, the filter not only ensures that Wi-Fi performance does not deteriorate in proximity of an LTE transceiver, but allows the antennas of both transceivers to be sited close together. The new module also supports Wi-Fi direct.


"LILY-W1 is a lower end Wi-Fi solution targeting (mobile) devices which require basic Wi-Fi connectivity such as driving recorders, measuring devices, logistics PDA or POS printers etc," said the company. "These device would mainly connect to end-devices such as smart phones, laptop PCs and tablets being used to control the device and may additionally send data to the cloud via LTE. In a mobile or off-grid application which uses Wi-Fi for basic data exchange (ie not video distribution, the over-crowded 2.4 GHz band does not represent a problem."  

The module connects to the host processor, either through SDIO or USB, and can operate concurrently in Client and Micro Access Point modes, and up to 8 clients can attach to it as a Micro Access Point. Royalty free Linux and Android drivers are provided as standard. With its extended temperature range from -40 to +85 degrees C, the module suits the growing need for industrial and commercial equipment to become connected. Typical applications can include telematics control units, drive recorders or OBD readers, as well as logistics or point of sales equipment.

Can WiFi work for the Internet of Things? 

Thursday, November 19, 2009

Atom module adds dual GbE, SATA and PCIe


Anders Electronics in London has developed a module that uses Intel's Atom processor with two Gigabit Ethernet connections for faster connectivity. Measuring just 65x75mm, the new CM-iAM SoM (system-on-module) packs more features than any other Atom Z530 SoM - notably up to 2GB RAM, 4GB on-board Flash Disk, SATA interface, dual GbE, and up to 3 PCIe lanes.
Used as a building block for any embedded application, the CM-iAM packs up-to-date technologies into the most compact, lightweight PC-on-module available in the market.
With on-board resources that smoothly run Linux, Windows XP or Windows 7, the CM-iAM’s standard X86 architecture runs most software applications written for PCs. And, the CM-iAM’s credit-card sized board boasts a low power consumption of 4-6W, making it ideal for battery and “always on” applications.
The basic feature set of the CM-iAM includes a 32-bit X86-compatible Atom Z530 CPU (up to 1.6GHz), up to 2GB RAM, 4GB on-board Flash Disk, SATA interface, and a Micro-SD slot. The CM-iAM also offers multiple display interfaces (RGB, LVDS and SDVO), with resolutions of up to 1920x1200 – enabling it to run high the definition graphics needed for such applications as digital signage.
For embedded applications, the CM-iAM provides a variety of display interfaces, up to 3 PCIe lanes, dual GbE ports, an RS232 serial port, up to 15 GPIO lines and many other essential functions. The user interface is supported by an enhanced graphics controller, 6 USB 2.0 ports, and 5.1 channels audio codec (analog+S/PDIF or HDA output).
To enable quick evaluation of the CM-iAM in the full range of usage scenarios, the SoM ships with an advanced evaluation base-board, the SB-iAM. This evaluation kit features a wide range of extension and I/O interfaces – most notably PCI and PCIe slots, RGB, LVDS, DVI and CRT display, and digital, analog and optical audio.
“Anders has always attempted to keep our clients on the cutting edge of technology,” said Rob Anders, CEO of Anders Electronics. “The CM-iAM is a true first – the smallest and most cost-effective SoM on the market, that doesn’t compromise on processing power or featureset."