All the latest quantum computer articles

See the latest stories on quantum computing from eeNews Europe
Showing posts with label server. Show all posts
Showing posts with label server. Show all posts

Wednesday, August 03, 2016

First look at type 7 COM Express that brings 10G Ethernet and 16 cores to the Computer-on-Module

ADLINK Technology has launched the first computer-on-module (COM) based on the latest COM Express type 7 pinout.

The Express-BD7 uses the PCI Industrial Computer Manufacturers Group (PICMG) COM Express 3.0 specification to put 10 Gigabit Ethernet (GbE) onto a COM form factor. This is aimed at space-constrained systems in industrial automation and data communication, such as virtualization, edge computing or other numerical applications, that require high density CPU cores balanced by reasonable power consumption. 

The COM Express standard’s new Type 7 pinout, as compared to the Type 6 pinout, removes all the graphics support and replaces it with up to four 10GbE ports and an additional eight PCIe ports, for a total of 32 PCIe lanes. 

As a result the Type 7 pinout has been specifically aimed at low power, headless server-grade processors with a thermal profile (TDP) below 65 Watts. The board uses Intel's Xeon processors with support up to 16 CPU processor cores, 32 PCIe lanes, and multiple 10GbE ports. In addition, the Type 7 pinout brings out 10GBase-KR signals, meaning the carrier board designer can choose between KR-to-KR, KR-to-optical fiber or KR-to-copper. A Network Controller Sideband Interface (NC-SI) bus is also supported, allowing for Intelligent Platform Management Interface (IPMI) Board Management Controller (BMC) support on the carrier board.

ADLINK's Jeff Munch chairs the PICMG subcommittee that is currently defining the new Com Express 3.0 specification, and has just published a preview of the new specification. The preview defines the new Type 7 pinout and allows module manufacturers and customers to start designs before the full specifications are published, which is expected to be the end of Q3 2016.

“ADLINK has worked closely with fellow PICMG members to develop this latest module specification and pinout to leverage a new type of low power, server-level silicon that appeared on the market at the end of 2015. Type 7 is tailor-made to accommodate these low power, server-oriented SoCs. In addition to the obvious use case in 10GbE data communication, we see many others application areas for these products, such as virtualization, real-time control and even graphics application using discrete GPU solutions over PCIe x16, " said Alex Wang, product manager for COM Express modules at ADLINK. “Our COM Express Type 7 roadmap focuses on creating products with advanced computing performance and multi-core capabilities. Our COM Express products are off-the-shelf building blocks that allow our customers to focus on added value to their carrier boards, reducing their total cost of ownership and expediting their time to market.”

The Express-BD7 provides up to 32GB dual channel DDR4 at 1867/2133/2400MHz ECC, up to eight PCIe x1 (Gen2), two PCIe x4, one PCIe x16 (Gen3), two SATA 6 Gb/s and four USB 3.0/2.0. The module comes with a build option for an operating temperature range of -40°C to +85°C and supports ADLINK Smart Embedded Management Agent (SEMA), which enables remote management and control of distributed devices.

The SEMA Cloud enables remote monitoring, autonomous status analysis, custom data collection and initiation of appropriate actions. All collected data, including sensor measurements and management commands, are available from any place, at any time via encrypted data connection.

www.adlink.com
See also:






For more information on the new PICMG COM Express® 3.0 specification and Type 7 pinout, download our technical article. For more information on the Express-BD7, please visit



http://www.adlinktech.com/Technology-Standards/Type-7/index.php

Wednesday, March 09, 2016

IDT teams with ProDrive to reduce switch latency

By Nick Flaherty www.flaherty.co.uk

The latency of switching data is a key challenge for today's high speed networks, and IDT has teamed up with Prodrive Technologies to develop a RapidIO switch with 100ns latency for next generation cellular infrastructure.

The embedded devices for these switches will be used in networks running from 750 Gbit/s to 4.8 Tbit/s for next generation 5G cellular networks where the lower latency will open up applications for the Internet of Things (IoT), as well as Mobile Edge and High-Performance Computing applications.

The new products are the result of work the two companies have conducted under the charter of the Open Compute Project (OPC) HPC group, which IDT co-chairs. The switch appliances use IDT's RapidIO technology, which is designed in to many 4G LTE networks.

RapidIO switches are used to connect computing components in complex processing-intensive systems, including SoCs, DSPs, FPGAs, GPUs and custom ASICs. IDT has shipped more than 110 million ports of its 10-20 Gbps RapidIO switches for use in production networks. In addition to using the second-generation switches, the new appliance portfolio will deploy IDT’s recently announced RXS family of RapidIO switches, which enable ports running at up to 50 Gbps with less than 1.2 W per port and 100ns latency.

"The single millisecond round trip latency requirements of 5G infrastructure will place considerable demands on all computing elements in the network, and these new RapidIO-based switching appliances deliver a leading combination of latency and energy efficiency,” said Sailesh Chittipeddi, IDT’s CTO and vice president of global operations. “This collaboration withProdrive Technologies helps meet the needs of 5G edge computing and C-RAN in the telecommunications arena, as well as high-performance computing and data centre analytics.”

Initial systems leveraging switch appliances with 38 ports operating at 20 Gbps have been deployed in wireless C-RAN and data analytics systems. Additional products, expected in the latter half of 2016, use IDT’s 50 Gbps-per-port RXS switch silicon portfolio with 19 inch rack-mountable systems.

“The collaboration with IDT has been instrumental in winning computing and telco customers using our RapidIO- based servers and switch appliances,” said Pieter Janssen, CEO of Prodrive Technologies. “By combining IDT’s interconnect and market channels with the Prodrive design and manufacturing in the EU, we have already deployed 10-20Gbps versions of the switch portfolio in tier 1 telco C-RAN programs as well as top-tier European HPC-oriented data centres. The switch appliances, complete with Prodrive’s RapidIO-connected FPGA/Power/x86/ARM servers, are also attractive for financial trading applications.”

The switch appliances feature scalable modularity with 32 to 96 ports supporting clustering at rack or multi-rack scale for target applications supporting heterogeneous processing with CPUs and accelerators. Multiple switch appliances can be connected in a leaf and spine network leveraging the RapidIO protocol to connect up to 64K processing nodes in a single network. Individual ports can be configured to run at a variety of speeds, including 1, 2.5, 5, 10, 20, 40 and 50 Gbps, and thus tuned to optimize overall system power consumption, depending on application workload.

"Taking an open and collaborative approach to developing solutions for Open Compute and OpenPOWER is accelerating and strengthening the development efforts of our broader open community," said Calista Redmond, president of the OpenPOWER Foundation. "IDT is at the forefront as OpenPOWER grows capabilities into edge computing across system and switch resources."



The switch appliance products are available directly from Prodrive Technologies: http://prodrive-technologies.com/rapidio-gen2-38-ports-top-rack-switch-box/. The 20 Gbps-per-port versions are available now.  Lead customers can contact Prodrive for customized 50 Gbps-per-port solutions featuring IDT’s RXS RapidIO switches.