All the latest quantum computer articles

See the latest stories on quantum computing from eeNews Europe

Thursday, April 21, 2011

Top 20 fabless chip companies of 2010

US Companies Held 13 of the Top 20 Fabless Spots in 2010

By Nick Flaherty www.flaherty.co.uk



Combined, the top 20 fabless IC suppliers represented 77% of the $59.9 billion in fabless IC sales last year, down two points from 2009 but up two points from 2008 according to Bill McClean of ICinsights.
He points out that 2010 was the first year on record that total fabless IC company sales did not outperform total IC market growth (a 27% increase for fabless IC companies versus a total IC industry growth rate of 31%). Relatively poor performances by Qualcomm, MediaTek, Nvidia, LSI Corp., ST-Ericsson, Realtek, and Himax were to blame as these seven “poor performers” increased their 2010 IC sales by only 8%, dismal results compared to total IC market growth of 31%.
Overall, 13 fabless IC companies had over $1.0 billion in IC sales in 2010. In contrast to the seven “poor performing” fabless companies, the “Magnificent Seven” fabless IC suppliers. These sales-growth ranking includes fabless IC suppliers that had over $1.0 billion in sales in 2010 and outgrew the total IC industry increase of 31%. It is interesting to see MStar catching up with Mediatek and Broadcom gunning for Qualcomm.

These seven high-growth billion-dollar fabless companies, in total, registered a strong 47% increase in IC sales last year. Moreover, they accounted for 45% of the total increase in fabless IC sales in 2010 ($5.7 billion out of $12.6 billion)! With only seven fabless companies out of just over 100 major fabless IC
suppliers (i.e., companies with greater than $10 million in sales) representing such a large share of last
year’s fabless IC sales increase, these companies are the prime targets for the IC foundries (e.g., TSMC, GlobalFoundries, UMC, Samsung, etc.).

IC Insights’ April Update to The McClean Report (to be released later this month) is dedicated to IC company rankings and includes the top 50 semiconductor, IC, and fabless IC suppliers. Moreover, the top company rankings of MPU, MCU, foundry, flash memory, DRAM, analog, etc., suppliers are also provided in the April Update.
Enhanced by Zemanta

Wednesday, April 20, 2011

173m Wi-Fi Direct Devices to Ship in 2011

Turn WiFi devices into access pointsBy Nick Flaherty www.flaherty.co.uk

Although it is currently on the market in small numbers, Wi-Fi Direct is expected to have a break out year in 2011 says market research In-Stat. The number of Wi-Fi Direct-enabled devices shipped will reach 173 million, led by desktop PCs, digital TVs, mobile phones, and notebook PCs. Wi-Fi Direct creates a much more powerful Wi-Fi solution, as it enables the premier wireless networking standard to add peer-to-peer capability, with no need for a Wi-Fi access point. This creates a much more compelling standard, a type of one-stop-shop for wireless connectivity, and brings Wi-Fi into competition with specifications such as Bluetooth. And because Wi-Fi Direct is software based, the marginal cost of Wi-Fi Direct-enabled silicon over basic Wi-Fi silicon is negligible.
"Wi-Fi Direct enjoys wide backing from Wi-Fi silicon vendors," says Brian O'Rourke, Research Director. "Companies such as Atheros, Broadcom, CSR, Intel, Marvell, Qualcomm, Ralink, and Realtek all have plans for widespread release of Wi-Fi Direct-enabled silicon. In fact, many of these companies received Wi-Fi Direct certification for at least one chip solution in the fourth quarter of 2010, shortly after the specification was released by the Wi-Fi Alliance in October. Ultimately though, the key to Wi-Fi Direct’s success will lie in the application programming interface (APIs) software that is developed to make Wi-Fi Direct useful to the consumer.”
Recent research by In-Stat found:
  • Every PC, CE device, and mobile phone that ships in 2014 with Wi-Fi silicon will be Wi-Fi Direct-enabled.
  • The Wi-Fi Direct-enabled device shipment compounded annual growth rate will be 79% between 2011 and 2015.

Enhanced by Zemanta

Tuesday, April 19, 2011

Conexant goes private

Acquisition by Golden Gate Completed
By Nick Flaherty www.flaherty.co.uk

One of the world's classic embedded chip suppliers, Conexant Systems, has been sold to private equity just like NXP and Freescale Semiconductors. In a deal that saw the company sold in the face of an earlier competing offer by SMSC,  it is now 'merged' into a new venture, Gold Acquisition Corp, a wholly owned subsidiary of Gold Holdings. Gold is an affiliate of Golden Gate Capital, a private equity firm headquartered in San Francisco, and as a privately held company, Conexant will no longer trade on the NASDAQ Global Market exchange.

After several years of downsizing (Mindspeed and Jazz Semioconductor are Conexant spinoffs and it sold off land next to its headquarters in Caifornia) the company's portfolio of embedded chips includes products for imaging, audio, embedded modem, and video surveillance applications. www.conexant.com.

Enhanced by Zemanta

Monday, April 18, 2011

LDRA and TASKING Integration drives code re-use in automotive, control and avionics

Integrated tools to certify small-footprint controllers
By Nick Flaherty www.flaherty.co.uk

Liverpool-based embedded code verification tool developer LDRA has linked its tool suite with Altium's TASKING VX-toolset for the Infineon C166 controller. This brings compliance to safety standards such as MISRA, IEC 61508, and DO-178B to small-footprint microcontrollers like Infineon’s C166 family. 
The combined solution maximises code reuse and process compliance for safety- and mission-critical software across automotive, industrial and avionics markets which has previously been a significant issue.
With the increased call for compliance to safety standards, development teams need integrated solutions that ease the challenge of proving compliance through all stages of the development lifecycle from requirements through coding, test and verification. LDRA provides standard compliance across all stages of the lifecycle, whether for automotive with MISRA and ISO 26262, industrial with IEC 61508 or avionics/military with DO-178B. With an Eclipse-based framework, the LDRA-TASKING integration covers the whole C166 family and its derivatives.
The integration between the TASKING compiler and the LDRA tool suite avoids tedious configuration challenges and enables developers to easily apply LDRA’s analysis and testing capabilities from within TASKING’s IDE. With a simple right click in TASKING’s IDE, developers can directly invoke LDRA analysis phases, gaining access to static analysis violations and code coverage, or quickly generate test cases, executing code on the target or TASKING simulator. With complete integration, all LDRA tool suite capabilities—from analysis to verification—can aid the TASKING developer in achieving certification compliance.
“Today’s customer is increasingly asked to certify applications that deliver more functionality within a shorter development cycle,” noted Harm-Andre Verhoef, Product Manager at Altium BV. “Automated software testing tools like those of LDRA deliver standard compliance and scalable solutions that test the applications on the target microcontroller no matter how small the footprint. Such capabilities ensure that automotive giants such as Daimler or industrial players like Siemens can meet their time-to-market goals within budget constraints.”
“Code reuse has become a fundamental way to cut development costs in today’s tight economy,” said Ian Hennell, LDRA’s Operations Director. “Thanks to this integration, application developers using TASKING’s
toolset can port code between standards, platforms and markets while maintaining superior code quality
because of the scalability of the LDRA tool suite. This represents significant cost savings and superior ROI in
choosing this combined solution, whether for medical, automotive or industrial applications.”
The integration with LDRA’s eXtreme Testing, the tool suite’s automatic test case generator, removes the time-consuming, error-prone process of test generation for TASKING-based applications. LDRA has a different approach to unit testing which is typically performed on the host and/or target systems with automatic test case generation. Instead LDRA’s automated unit testing tool TBrun, eXtreme Testing automatically populates unit test cases to the point of generating the test cases themselves.
Such automatic test vector generation enables developers to quickly achieve the required levels of compliance for safety standards. Thanks to the extendable nature of the LDRA tool suite, compliance for one standard or platform can be scaled to another. Customers developing for the automotive market, for example, can therefore sell the same component solution into industrial or avionics environments, simply adding the verification tasks required for the new environment.
Enhanced by Zemanta

Tuesday, April 12, 2011

Trends for the next decade

Frost & Sullivan Identifies Top Global Mega Trends and Launches Innovation Research Programme
By Nick Flaherty www.flaherty.co.uk


Market researcher Frost & Sullivan believes it has identified the top Mega Trends that will influence and shape the world in the coming years and has launched a Visionary Innovation Research Programme. 
Ongoing research will cover a spectrum of interesting Mega Trends in the following areas: 
  • Development of Mega cities, regions and corridors, 
  • “Smart” emerging as the new Green, 
  • Geo Socialization, 
  • Innovating to Zero, 
  • Beyond BRIC: The Next Game Changers, 
  • Space Jam, 
  • Personal Robots, 
  • e-Mobility 
  • and New Business Models

The objective is to provide companies with special reports to focus on the evolution of these global trends to help them drive growth and innovation in a rapidly changing environment.
According to the analysis, sustainability was one of the major Mega Trends that shaped human, organisation and government behaviour in the last decade. The study forecasts health, wellness and well-being with a much wider definition than mere healthcare, which will include body, mind and soul as the most important factor of discussion and differentiation in this decade. It reveals that women empowerment will reach new heights, with one in three workers being a woman and up to 40 percent of boardrooms in some nations comprising women by 2020. The world will also witness reverse brain drain, wherein the vast vacancies for CXOs in countries like India will be filled not only by returning Indians, but also by Americans and Europeans seeking better prospects.
There will be many interesting Mega Trends to watch out for. First, future urbanization will drive integration of core city centres or downtowns with suburbs and satellite cities, resulting in expanding boundaries from the current average of 25 miles (40 km) to around 40 miles (64 km) with the emergence of 30 Mega-cities, 15 Mega-regions and at least 10 Mega-corridors with over 20 million people by 2020. Urbanization will lead to new hub and spoke business models for healthcare, logistics, retailing and many other functions, forcing organizations to re-think their ‘Urban’ business model.
Second, e-Mobility will redefine personal mobility. Over 40 million electric vehicles, including electric pedal cycles, scooters, four-wheelers and buses will be sold annually around the globe in 2020. The opportunity in the e-Mobility market is not in making cars but in its value chain, batteries (including second life and recycling), charging stations and packaging innovative mobility solutions such as ’pay by electrons.’
The next level of social networking will focus on geographic services and capabilities such as geocoding and geotagging to enable additional social dynamics. User-submitted data with profiles and interests will be matched with location-based services to connect and co-ordinate with surrounding people or events. This type of geo-networking will drive markets, businesses and individuals to interact, advertise and promote in real time.
Another trend identified by Frost & Sullivan is Innovating to Zero. This trend examines a world of zero emissions, zero accidents, zero fatalities, zero defects, zero breaches of security and carbon-neutral factories.
Enhanced by Zemanta

Infineon guns for Atmel's microcontrollers - updated

Files US Patent Infringement Lawsuit over AVR chips

By Nick Flaherty www.flaherty.co.uk

Infineon Technologies has filed a patent lawsuit against Atmel in the US over microcontrollers and touchscreen controllers.
Infineon says it is seeking damages for infringement of eleven of its US patents covering Atmel's AVR, XMEGA, and maXTouch controllers and related products used in automotive, industrial, and touch screen applications.


On Wed 13th April, Atmel said it had not yet reviewed the complaint in detail but intended to vigorously defend the allegations.
Infineon asserts that Atmel is infringing 11 Infineon patents. It is also seeking a declaration that three Atmel patents are either invalid or not infringed. Prior to the filing of this lawsuit, Atmel says it and Infineon were engaged in discussions to determine whether a licensing relationship between the companies was desirable, including whether Infineon required a license from Atmel for patents that Atmel believes Infineon may be infringing. During those negotiations, Atmel concluded that its products did not infringe any of the Infineon patents under discussion or that those patents were, in fact, invalid. In its complaint, Infineon identified five additional patents that it alleges Atmel has infringed, none of which the company has yet fully reviewed.
"With the tremendous success we have had in the microcontroller market over the past several years, this type of suit does not come as a surprise. We believe these allegations are baseless, and we intend to defend ourselves vigorously. As part of this process, we will also now evaluate, more definitively, whether Infineon has infringed our intellectual property," said Scott Wornow, Senior Vice President and Chief Legal Officer.

The AVR family was originally based on an 8051 core developed at Nordic VLSI and launched in 1996 and so have been shipping for over 15 years, and Atmel has seen considerable success with its maXTouch touchscreen controllers. The 32bit variant, developed at the Norwegian University of Science and Technology was launched in 2006 and has been widely used in open source designs.


Enhanced by Zemanta

Friday, April 08, 2011

Silicon Line aims at optical DisplayPort with ultra low power chipset

Launches World’s Most Power Efficient 6Gbit/s VCSEL Driver and TIA Chipset

By Nick Flaherty www.flaherty.co.uk

Fabless analogue chip designer Silicon Line in Munich has launched an ultra-low power 6Gbit/s VCSEL (Vertical Cavity Surface Emitting Laser) driver and TIA (transimpedance amplifier) CMOS chipset that only consumes a total of less than 14 mW at full line rate, aiming at new applications such as optical DisplayPort links.
“In the consumer market we see several key trends. One trend is the demand for ever higher data bandwidth as Full HD video and 3D become mainstream in EMI sensitive devices. Another trend is the demand for dramatically reduced power consumption, not only to increase battery life for portable devices but also for environmental reasons. Additionally, devices with slim form factor designs are highly popular and they place severe restrictions on the size and mechanical flexibility of the link used to transport the high-speed data”, says Ian Jackson, Senior Manager Sales and Marketing at Silicon Line. “An optical link which uses these chips - the SL82028 and SL82018 - enables all these key trends”, he added.
An example of an application where these trends can be seen is the DisplayPort / embedded DisplayPort technology used in notebooks, netbooks and tablets, as well as to connect external monitors to PC’s. The latest version of DisplayPort, version 1.2, operates at 5.4Gbit/s per lane. When used in notebooks, netbooks or tablets, minimum power consumption is required in order to extend battery life. The inputs of SL82028 and the outputs of SL82018 are DisplayPort compliant and using an optical link using these ICs eliminates any EMI concerns and enables slim form factor designs.
The SL82028 and SL82018 are aimed at a wide range of applications including DisplayPort optical cables, mobile / smart phones, as well as other mobile consumer products like tablets, digital still cameras, digital video cameras, notebooks and netbooks. They can also be used for automotive, industrial and medical applications.
Enhanced by Zemanta

Gennum buys Nanotech Semi for $34m

From SiliconSouthWest - Bristol-based telecoms chip designer Nanotech Semiconductor has been bought by Gennum of Canada for $34 with a $6m earnout for staff.

http://siliconsouthwest.co.uk/index.php/2011/04/gennum-buys-nanotech-semi-for-34m/

MathWorks Introduces Automatic C Code Generation Directly from MATLAB Language

MATLAB Coder Eliminates Manual Recoding 
By Nick Flaherty www.flaherty.co.uk

Design tool developer MathWorks has taken a key step forward im simplifying the development of embedded systems with MATLAB Coder - a tool that enables design engineers to automatically generate readable, portable C and C++ code directly from their MATLAB algorithms. 
This new tool eliminates the need to manually translate MATLAB algorithm code into C and C++ code for prototyping, implementation, and software integration. This automation results in a faster, more efficient system-development workflow with less bugs - vital for embedded systems.
The design of algorithm-intensive electronic and communications systems typically begins with MATLAB algorithms that eventually need to be converted into C code for integration into the final product. Manually converting from MATLAB to C can take from days to weeks, introduce design errors, and contribute to time-to-market delays. Now design engineers can use MATLAB to speed up development tasks, such as fixed-point design and prototyping, and then automatically generate C code with MATLAB Coder.
MATLAB Coder supports an extensive set of MATLAB language features for algorithm development, including built-in matrix math operators and dynamic array handling. Hundreds of operators, functions, and System objects are supported, including many advanced algorithms for DSP and communications.
Along with the introduction of MATLAB Coder, MathWorks released Simulink Coder and Embedded Coder. These two new products simplify code generation for Simulink and Stateflowusers by combining capabilities previously available in multiple MathWorks offerings. The new products incorporate the industry-proven Real-Time Workshop technology, and offer full code generation support for rapid prototyping, real-time testing, and production embedded system implementation with built-in links to embedded development environments.
“Automatic C code generation from Simulink has transformed embedded system development in many organizations for more than a decade,” said Ken Karnofsky, senior strategist at MathWorks. “Now, MATLAB Coder brings those productivity gains to engineers who use MATLAB to develop algorithms for electronic and embedded systems. With MATLAB Coder, Simulink Coder, and Embedded Coder, MathWorks offers a simple and more comprehensive code generation offering for all of its customers.”
Enhanced by Zemanta

Tuesday, April 05, 2011

TI CEO appeals to customers over Nat Semi deal

Commits to no requalification of parts or changes of part numbers
By Nick Flaherty www.flaherty.co.uk

Rich Templeton, CEO of Texas Instruments, has written to customers about the impending takeover of National Semiconductor in a move that looks like an attempt to reassure some nervous embedded designers.

"This acquisition will allow us to address your analog needs with a product portfolio of unmatched breadth and depth," he said. "National's 12,000 products plus TI's 30,000 means more performance, power and packaging options when selecting the right ICs for your application. And we'll provide a common set of best-in-class online tools to make the selection and design process easier."

"Our combined sales and applications team of 2,500 will be larger than any in the industry so we can provide more customers with greater face-to-face support than ever before. Our manufacturing operations will offer more capacity to support your growth. TI's fabs and National's available capacity can enable higher production levels."

In a strong commitment that is important for the embedded market, he says that TI will continue to use the Nat Semi fabs and part numbers. "While both companies will operate independently pending the close, our goal thereafter is to make the integration process as seamless as possible. No requalification of products will be necessary since National's manufacturing sites will continue to be utilized. Part numbers from both companies will remain the same," he said. "There will be no obsolescence of products."

More on the acquisition is at www.ti.com/acquire, including answers to frequently asked questions and video messages from TI leaders regarding the acquisition.

TI buys National Semiconductor

Creates analogue and power management giant
By Nick Flaherty www.flaherty.co.uk

Texas Instruments is to acquire National Semiconductor in a $6.5bn cash deal that demonstrates the continuing consolidation of chip providers for embedded systems. The deal, under which TI will acquire National for $25 per share in an all-cash transaction of about $6.5 billion, combines two industry leaders in analogue semiconductors, each with unique strengths in delivering products to improve performance and efficiency and convert real-world signals in electronic systems. The boards of directors of both companies have unanimously approved the transaction.

“This acquisition is about strength and growth,” said Rich Templeton, TI’s chairman, president and chief executive officer. “National has an excellent development team, and its products combined with our own can offer customers an analog portfolio of unmatched depth and breadth. In recent years, National’s management team has done an outstanding job of improving margins and streamlining expenses, which upon close will increase TI’s profitability and earnings per share, excluding transaction costs. Our ability to accelerate National’s growth with our much larger sales force is the foundation of our belief that we can produce strong returns on our investment. The combined sales team will be 10 times larger than National’s is today, and the portfolio will be exposed to more customers in more markets.”

“Our two companies complement each other very well,” said Don Macleod, National’s chief executive officer. “TI has much greater scale in the marketplace, with its larger portfolio of products and its large global sales force. This provides a platform to enhance National’s strong and highly profitable analog capability, power management in particular, leading to meaningful growth.”

Each company has unique strengths. Among them are the breadth of TI’s 30,000 analog products, extensive customer reach, and industry-leading manufacturing including the world’s first 300-millimeter analog factory. National brings a portfolio of 12,000 analog products, a strong position with customers in the industrial power market, and excellent customer design tools. Upon close of the transaction, National becomes part of TI’s analog segment, and sales of analog semiconductors will represent almost 50 percent of TI’s revenue.

The combined company also will benefit from National’s manufacturing operations, located in Maine, Scotland and Malaysia, which TI will continue to operate. Each site has additional capacity to increase production. National’s headquarters will remain in Santa Clara, California.

The market for analogue semiconductors was $42 billion in 2010. TI is the market leader with 2010 analog revenue of $6.0 billion, or 14 percent of the market. National’s revenue in calendar year 2010 was about $1.6 billion, or 3 percent of the market.

Thursday, March 31, 2011

German company launches first commercially available automated software for process ports

By Nick Flaherty www.flaherty.co.uk

Automated Schematic Porting Tool Cuts Effort by 10-100X Compared to Manual Porting
 MunEDA in Munich has launched the first commercially-available electronic design automation (EDA) software tool to automate the time-consuming task of porting circuit schematics and intellectual property (IP) between different process technologies and process design kits (PDKs). 
As the newest member of MunEDA’s tool suite, the WiCkeDTM SPT Schematic Porting Tool executes 10-100X faster than manual schematic porting, significantly reducing design time and effort. The tool supports migration paths in major TSMC process technologies such as from tsmcN65 (65nm) to tsmcN40 (40nm), but can be configured also for different process migration paths. 
“IP and schematic porting is one of the key topics of the industry,” said Andreas Ripp, MunEDA vice president Sales & Marketing. “Migrating circuit schematics between different process technologies and PDKs can be a very time-consuming task for circuit designers, and we see a clear customer need for an automated solution. MunEDA invested in the development of this advanced technology and methodology, which significantly increases designer productivity and is much simpler than manual schematic porting.”
MunEDA WiCkeD SPT supports designers with an efficient design migration path, automatically replacing cells in the source PDK with corresponding cells for the target PDK. It provides flexible property mapping and automated shrinking, and handles all kinds of devices such as MOS transistors, resistors, capacitors and others. It is configurable for many source and target process technologies, and is initially available in TSMC processes. MunEDA can set up further process technologies on request. MunEDA WiCkeD SPT is fully integrated into the Cadence Virtuoso-based unified custom/analog flow.
“SPT addresses the ever-growing challenge of migrating many design blocks – and even entire SoCs – from one process to another in a short time, often with limited engineering capacity," said Michael Pronath, MunEDA vice president of Products & Solutions. "Migrating analogue/mixed-signal (AMS) designs, RF designs, IP libraries and high-speed interfaces is particularly challenging, because there is no simple rule for shrinking them. Most blocks need individual adjustment of topology, geometries, biasing, etc., even if the specifications don’t change. It is therefore necessary to migrate and port the schematics individually to conform to the technology constraints and to meet performance specifications. Manual migration is effort-intensive, and threatens to be a bottleneck. SPT solves these problems.”
MunEDA WiCkeD SPT will begin shipping in April. Pricing for a single license starts at $25,000 USD for a one-year time-based license.
Enhanced by Zemanta

Monday, March 28, 2011

MIPS to develop multi-threaded 64bit multiprocessor core


“Prodigy” core for Advanced Networking, Storage and Mobile

By Nick Flaherty www.flaherty.co.uk

MIPS Technologies plans to offer the industry’s first IP core that combines a 64bit processor architecture with simultaneous multi-threading (SMT) technology. The core, the first in a family of cores code named “Prodigy,” will be officially launched later in 2011. By offering the combination of a 64bit architecture, SMT technology and coherent multiprocessing in an off-the-shelf IP core, MIPS is providing the mass market with a fast path to performance, efficiency and scalability for advanced networking, storage, mobile and digital consumer designs.
Unlike ARM, MIPS Technologies has a long history in 64bit processing. The company has licensed its MIPS64 architecture to numerous licensees for a range of embedded markets including advanced networking, storage and servers, where applications can benefit from the larger address space and increased data processing capability of a 64bit architecture. MIPS Technologies also has an extensive history in multi-threading technology. Multiple MIPS licensees have reported significant increases in performance as well as overall system efficiency with MIPS-Based multi-threaded processors. SMT promises even higher gains in performance and efficiency through the ability to execute multiple instructions from multiple threads every clock cycle.
“With MIPS Technologies’ deep expertise and tradition in both multi-threading and 64bit processing, this is a natural next step,” said Joseph Byrne, an analyst at The Linley Group and author of A Guide to CPU Cores and Processor IP. “As applications become more complicated and require more memory, there is a basic limitation of accessing memory with 32bit addresses. That limit is becoming a barrier. Ultimately it will be necessary for many embedded applications to move to 64bit architectures because of the practically unlimited address space they allow. The time is right for MIPS to introduce this product to the market, because the next generation of advanced communications and networking products will need this headroom.”
“With our forthcoming core, our customers can now quickly and easily develop MIPS64 solutions at a fraction of the cost and time it would take to develop a 64bit core themselves,” said Art Swift, vice president of marketing and business development, MIPS Technologies. “We’re pleased to offer this solution, for which we are seeing increasing demand. Our customers can leverage not only the advanced 64bit Prodigy IP core, but they will also benefit from the surrounding infrastructure and broad, mature ecosystem that are already in place for the MIPS64 architecture as well as multiprocessing and multi-threading on MIPS.”
The Prodigy core family will offer seamless code compatibility and an elegant upward migration path between the MIPS32 and MIPS64 architectures.
Enhanced by Zemanta

Thursday, March 24, 2011

ST launches Next-Generation iNEMO engine

Enables New Level of Motion-Sensing Applications on Smart Consumer Devices

By Nick Flaherty www.flaherty.co.uk


STMicroelectronics has unveiled the first details of its new iNEMO sensor engine.

The advanced filtering and predictive software engine integrates the outputs from a 3-axis accelerometer, 3-axis gyroscope and 3-axis magnetometer. Fusing these sensors’ data, the iNEMO delivers dramatically more accurate and reliable sensor performance for next-generation smart consumer devices for a host of new motion-based applications.
For many current applications, such as freefall detection, screen rotation or pedometers, a single MEMS accelerometer meets their system requirements. However, a new class of advanced applications is emerging, for example: location-based services, enhanced motion-based gaming, pedestrian dead-reckoning for indoor and multi-floor navigation, robotics or human-body tracking. These applications require multiple MEMS sensors, together with advanced software, to achieve better overall system performance in terms of accuracy, resolution, stability and response time.
“The iNEMO Engine delivers a quantum leap in the performance level required by next-generation smart mobile devices to enable a myriad of new exciting applications,” said Benedetto Vigna, Group Vice President and General Manager of ST’s MEMS, Sensors and High Performance Analog Division “It also lifts the burden of complex sensor algorithm development off the shoulders of our customers.”
The iNEMO Engine software integrates a set of highly sophisticated adaptive algorithms for prediction and filtering. The software takes data from the outputs of various motion sensors in smart consumer devices and integrates it so that the sensor outputs augment each other, leapfrogging what individual sensors can do alone. The software can correct for magnetic distortions registered on the magnetometer, dynamic distortion measured by the accelerometer, and inherent drift over time of the gyroscope. This protects the accuracy of heading information, removes pointing inaccuracies and drift problems, and virtually eliminates timeouts for calibration.
The iNEMO Engine is available now to major consumer manufacturers, upon request via the usual ST sales channels, for integration into leading mobile platforms in a two-chip sensor solution (LSM303DLHx e-compass and the L3G4200D gyroscope). Advanced new mobile devices using ST’s iNEMO Engine multi-axis sensors are expected to be in production at leading consumer manufacturers before the end of the year.
In addition, ST’s has a wide range of highly accurate MEMS sensors available for the iNEMO Engine. These sensors include accelerometers to measure linear acceleration and earth gravity, gyroscopes to measure angular velocity, and magnetic sensors that output reliable heading information.
Enhanced by Zemanta

ST launches Next-Generation iNEMO engine;

Enables New Level of Motion-Sensing Applications on Smart Consumer Devices

By Nick Flaherty www.flaherty.co.uk


STMicroelectronics has unveiled the first details of its new iNEMO sensor engine.

The advanced filtering and predictive software engine integrates the outputs from a 3-axis accelerometer, 3-axis gyroscope and 3-axis magnetometer. Fusing these sensors’ data, the iNEMO delivers dramatically more accurate and reliable sensor performance for next-generation smart consumer devices for a host of new motion-based applications.
For many current applications, such as freefall detection, screen rotation or pedometers, a single MEMS accelerometer meets their system requirements. However, a new class of advanced applications is emerging, for example: location-based services, enhanced motion-based gaming, pedestrian dead-reckoning for indoor and multi-floor navigation, robotics or human-body tracking. These applications require multiple MEMS sensors, together with advanced software, to achieve better overall system performance in terms of accuracy, resolution, stability and response time.
“The iNEMO Engine delivers a quantum leap in the performance level required by next-generation smart mobile devices to enable a myriad of new exciting applications,” said Benedetto Vigna, Group Vice President and General Manager of ST’s MEMS, Sensors and High Performance Analog Division “It also lifts the burden of complex sensor algorithm development off the shoulders of our customers.”
The iNEMO Engine software integrates a set of highly sophisticated adaptive algorithms for prediction and filtering. The software takes data from the outputs of various motion sensors in smart consumer devices and integrates it so that the sensor outputs augment each other, leapfrogging what individual sensors can do alone. The software can correct for magnetic distortions registered on the magnetometer, dynamic distortion measured by the accelerometer, and inherent drift over time of the gyroscope. This protects the accuracy of heading information, removes pointing inaccuracies and drift problems, and virtually eliminates timeouts for calibration.
The iNEMO Engine is available now to major consumer manufacturers, upon request via the usual ST sales channels, for integration into leading mobile platforms in a two-chip sensor solution (LSM303DLHx e-compass and the L3G4200D gyroscope). Advanced new mobile devices using ST’s iNEMO Engine multi-axis sensors are expected to be in production at leading consumer manufacturers before the end of the year.
In addition, ST’s has a wide range of highly accurate MEMS sensors available for the iNEMO Engine. These sensors include accelerometers to measure linear acceleration and earth gravity, gyroscopes to measure angular velocity, and magnetic sensors that output reliable heading information.
Enhanced by Zemanta

Wednesday, March 23, 2011

Corning sees displays embedded everywhere in the home

By Nick Flaherty www.flaherty.co.uk

A video from Corning has an interesting view of the future for touchscreen displays embedded into a range of household items such as bathroom mirrors and kitchen work surfaces, with an optimistic 'near future' view!

ZTE shows record-breaking 10Tbit/s data link

Push to 400Gbit/s systems drives need for 10Gbit/s trunking

By Nick Flaherty www.flaherty.co.uk

Chinese telecoms equipment maker ZTE has broken the previous world record for single-channel data transmission with a recorded single-channel rate of 10Tbit/s over 640km of single-mode fibre optic cable. This is the equivalent of sending 160 HD movies per second.
The results of the test transmission were presented at the recent OFC/NFOEC conference in Los Angeles and lays a foundation for future research into optical transmission technology with higher single-channel rates at the heart of the internet of the future based on ZTE's patented  “carrier generation technology”. This generates 112 coherent and frequency-locked optical sub-carrier signals; with each sub-carrier bearing 100Gbit/s optical signals, and successfully achieved optical signals with a single-channel rate of 11.2Tbit/s, a net 10Tbit/s line rate plus overheads such as forward error correction (FEC).
In an era where the global optical communications industry is entering 100Gbit/s transmission, all mainstream manufacturers are not only promoting the practical deployment of 100Gbit/s but also actively seeking candidate technologies at higher bit rates of 400Gbit/s, 1Tbit/s, and beyond. With rapid growth in demand for higher bandwidth, single channel 10Tbit/s will be the transmission rate for future telecommunication networks.
The ZTE paper was the only post-deadline paper presented by a Chinese company at the conference and the company sees this as confirming its position as a global technology leader in the fibre communications transmissions over competitors such as Huawei.
“With OFC’s acknowledgement of our research results in 100G and beyond-100G technology, we will go on to invest further efforts in high-speed optical transmission and apply further research results in the pending global deployment of 100G technologies,” said Fan Xiaobing, General Manager of ZTE’s bearer network product line.

Enhanced by Zemanta

Friday, March 18, 2011

Solid State Drives Boom in 2011

Twin engines of consumer and enterprise usage will fuel growth to over $4bn

By Nick Flaherty www.flaherty.co.uk

Have we finally turned the corner to see solid state drives start to really take off? IHS iSuppli thinks so, predicting a near doubling of revenues this year to hit more than $4 billion and extending a robust performance in the storage market for the second year in a row.
SSD revenue this year is projected to hit $4.4 billion, up 91.3 percent from $2.3 billion in 2010. Growth in 2011 continues the expansion of the market starting last year, when the industry crossed the $1 billion threshold, figures indicate. This is becoming more apparent with SSD maker OCZ buying controller chip designer Indilinx this week.SSD revenue will continue to push ahead in the near future, even though the succeeding years will yield less impressive growth rates ranging from 7 to 25 percent. By 2014, SSD revenue is anticipated to reach $7.2 billion.



Ramping up in Consumer and Enterprise Segments
A number of compelling factors this year is spurring growth in SSDs—a type of storage technology comprised mostly of semiconductors and without any movable parts, unlike their rival hard disk drives made of magnetic media. Not only has pricing dropped for the NAND flash memory chips used in SSDs, solid state drives also are picking up real traction in both the consumer and enterprise markets.
The industry’s hottest segment in 2011 will be SSDs for consumer usage, IHS predicts, as shipments of SSD-outfitted high-end notebooks skyrocket. Last year’s Apple Inc.’s MacBook Air, for instance, succeeded in highlighting the SSD as a tangible differentiator—as opposed to soft attributes like design and build quality—for high-end notebooks. By designing around a small storage footprint and throwing in the fast performance typical of NAND flash, Apple delivered an attractive computing experience otherwise not achievable through a hard drive, thereby demonstrating the virtues inherent in SSD-equipped computers.
SSD’s other growth segment this year lies in the enterprise, which increasingly employs flash storage to overcome performance bottlenecks. In applications like online transaction processing and financial analysis, SSD drives using single-level-cell (SLC) NAND are preferred in order to enable optimal bandwidth and longevity. In addition, “enterprise-grade” multi-level-cell (MLC) NAND flash also has picked up steam as vendors improve MLC performance and controller sophistication, with a majority of enterprise SSDs now shipping with MLC flash.
Boosting SSD’s cachet within the enterprise segment, transformative applications—such as tiered server and storage system designs—are occurring, made possible by solid state technology. Other new applications capitalizing on the advantages of NAND flash also are getting ready to take off, further distancing SSDs from their hard disk drive legacy.
IHS revenue prospects for SSD this year have been consistent with last year’s outlook, but the sentiment then wasn’t as buoyant coming on the heels of a slow first half. SSDs had struggled earlier in 2010—partly due to a rise in NAND prices, and also because hard disc drives continued to increase their capacity and price advantage. But now, given the star turn for SSDs in ultraportable notebooks as well as an enhanced profile in the enterprise, the success projected by IHS for the industry has become a reality.
Mirroring the notable results in revenue, SSD shipments this year will be on an upswing, projected to reach approximately 15 million units, an increase of more than 118 percent from 6.9 million in 2010. Yet SSD shipments remain miniscule compared to those for hard disk drives, which will total roughly 161 million units in the first quarter of 2011 alone. At the same time, the hard disk drive market is consolidating and seeing much slower growth.

Read More > SSD Boom in 2011 Fueled by Twin Engines


Enhanced by Zemanta

Planning not panic is the key to IPv6 migration

By Nick Flaherty www.flaherty.co.uk

Duncan Hughes, systems engineering manager at Brocade recommends a 6 Step Systematic approach to  issue of migrating from IPv4 to the new generation IPv6 addresses. With IPv4 addresses down to the last few blocks, many are asking whether fears that IPv6 is the ‘end of the Internet’ is nothing more than vendor induced hype, or if it is something network managers and CIOs need to take seriously.
Brocade argues that while IPv6 migration is a serious issue that needs action, it is not a reason to panic and that phased deployments can reduce both the financial and performance impact on the enterprise. It recommends a 6 Step approach to IPv6:

1. Don’t Panic, PrepareWhile there is no need for panic, IPv6 is something businesses need to start preparing for - and preparing for right now. Understand the impact on your business

2. Conduct an in-depth Audit of your networkThe question isn’t ‘are you IPv6 ready?’ but ‘WHERE are you IPv6 ready?’ IT companies have been offering IPv6-ready solutions for some time, and some applications and services are less likely to be impacted. Those that are customer facing and mission critical should be the priority.

3. Create a strict timeline, and stick to itIt will take a while before the number of IPv6 addresses issued generates a ‘tipping point’ - estimates suggest it will be another 12 months before the available IPv4 addresses completely run out. But as the number of Internet users continues to increase (up to 1.97 billion in 2010, a year on year increase of 14 percent), it won’t be long before IPv6 use grows to a level that creates problems.

4. Don’t try and do everything at once If a full network upgrade is under consideration, this is a good to time to clean-house. If not the best approach is one of incremental migration over time versus any ‘rip and replace proposition’ (a high cost and high risk approach)

5. Recognise that the network needs to support your business demands today, tomorrow and in the future for your business to succeedPlan your migration in a series of stages to reduce impact on business activities, and see it as part of a long-term network evolution. Build your IPv6 planning into product lifecycle replacement plans and don’t consider anything that isn’t compatible with IPv6 moving forward

6. Recognise that interim solutions can provide long-term ROIUsing transition technologies such as double stacks, will help manage the initial flow of IPv6 traffic, and don’t dismiss translation solutions. Upcoming new solutions mean you can run IPv6 and IPv4 without any noticeable time-lag. Diligently review the solutions available before taking action. There are dual-protocol point-solutions available that are specifically engineered to help organisations make the transition without the need for costly upgrades.
Enhanced by Zemanta

Wednesday, March 16, 2011

Graphics-Enabled Microprocessor Use Surges in 2011

By Nick Flaherty www.flaherty.co.uk

This year will be the biggest period yet for graphics-enabled microprocessors (GEM), as the penetration of GEMs reaches 50 percent in notebook PCs and 45 percent in desktops, says the latest research from IHS iSuppli.

This will also drive the use of GEMs in embedded systems bringing more sophisticated graphics and user interfaces without the power consumption, cost and complexity of separate graphics cards.

Global GEM penetration in the notebook segment in 2011 will rise by a dramatic 11 percentage points from 39 percent in 2011. With worldwide notebook shipments expected to amount to more than 230 million units this year, GEMs will be in about 115 million notebooks by the end of 2011.

For desktops, GEM penetration this year will increase by a robust 9 percentage points from 36 percent in 2011. With desktop PC shipments experiencing a resurgence in 2010 and 2011 thanks to strong corporate replacement demand, IHS expects shipments of GEM-equipped desktop PCs to exceed 63 million in 2011.

By 2014, 83 percent of all notebook PCs and 76 percent of desktop PCs worldwide will ship with GEMs.

“GEMs are microprocessors that feature a central processing unit (CPU) as well as a graphics processing unit in a single-chip design, supplementing the brains of a PC with more graphics capability to run visually intensive applications,” said Peter Lin, principal analyst for compute platforms at IHS. “With GEMs capable of generating the total graphic output of a PC, no additional graphics processor or add-in graphics card is needed. Computers today are serving up ever-richer multimedia experiences, so the graphics capabilities of PCs have become more important, driving the rising penetration of GEMs.”

Intel vs. AMD
The two biggest players in the PC microprocessor field, Intel and Advanced Micro Devices (AMD), are intensifying their competition in the GEM market in 2011, IHS iSuppli research indicates. Intel at the beginning of 2011 was getting ready to launch its second-generation Core processor family known as Sandy Bridge, which integrates the CPU and graphics processor into one single piece of silicon. AMD, on the other hand, will release five application platforms with five GEM microprocessor categories.

The third player, VIA, caters to different markets with GEM solutions for embedded and industrial applications.
GEMs vs. discrete graphic cardsDespite their rising popularity, GEMs are unlikely to offer the same high level of performance as discrete graphics cards, IHS believes. Discrete graphics cards will remain the solution of choice for leading-edge graphics, providing high-end performance for applications such as games. In comparison, GEMs could be used to satisfy the needs of the mass PC market that does not require high-level graphics functionality, with the product targeted at the mainstream and value PC segments.
As a result, while some cannibalization of the discrete graphics market will occur because of GEMs, erosion of the discrete market will not be significant in the short to medium term, IHS believes.
Enhanced by Zemanta

Chipworks reverse engineers the Apple A5 processor

By Nick Flaherty www.flaherty.co.uk

Chipworks has reversed engineered the Apple A5 processor used in the iPad2. 
They decapsulated the A5 a couple of days ago, but as you could see in those early pictures, you can’t tell much of a chip’s layout from the top metal – it’s all power and ground buses.  So they had to de-layer the chip down to a level to see the block layout of the chip; not an easy thing when there’s nine layers of metal!  In fact, these days it’s easier to go in from the back and remove the substrate silicon, and look at the gate level from below.  Then they identify the circuit blocks that make up the full device.
For the A5, a dual ARM core processor:
Apple A5 Polysilicon Die Photo with Annotations
Apple A5 Polysilicon Die Photo with Annotations
The ARM cores are in the right half of the die, with ~4.5 Mb of cache memory each.  You can also see the USB interface at the top, and the DDR SDRAM interfaces at the bottom right, for the memory in the top part of the package-on-package.  Other I/O blocks are strewn around the edge of the die.
It seems likely that Apple will actually be shipping TSMC-made parts later this year, since Samsung is a competitor with its Galaxy tablet series, but the current devices are made by Samsung, as shown by a cross section of the chip:

Enhanced by Zemanta

Tuesday, March 15, 2011

Microcameras become disposable

By Nick Flaherty www.flaherty.co.uk

Researchers at the Fraunhofer Institute in Germany have developed a microcamera that is as small as a grain of salt and cheap enough to be disposable, opening up opportunities in medical and automotive applications.
Endoscopy has gone through amazing advancements in recent years. Microcameras on the tip of endoscopes supply images from the inside of the human body in ever higher resolution, which often makes it possible to identify tumors at an early stage. Endoscopes though have some downsides, since they are expensive and, because of their multiple usages, have to be put through time-consuming and exhaustive cleaning procedures every time they are used. 
This problem might be solved by the new microcamera that the Fraunhofer Institute for Reliability and Microintegration (IZM) in Berlin, Germany has developed together with Awaiba and with the support of the Fraunhofer Institute for Applied Optics and Precision Engineering IOF in Jena, Germany. 
“We can produce microcameras so inexpensively with our technology that doctors can dispose of endoscopes after using them only once,” said Martin Wilke, a scientist at the Fraunhofer Institute for Reliability and Microintegration. This is made possible by a new type of manufacturing process.
Digital camera systems consist of two components: a lens and a sensor that transforms the image into electrical signals. Electrical contacts on the sensor allow access to these signals and therefore also to the information of the image. Due to the way they are manufactured, these contacts are located between the sensor and the lens. The sensors are manufactured simultaneously in large numbers, like computer chips.
“You have to think of a book full of postage stamps where many thousand stamps are printed in one step," said Wilke. "If you want to use them, you have to separate one from another. Instead of a sheet of paper, with image sensors you have a circular disc of silicon that is known as a wafer.” 
About 28,000 image sensors fit onto one wafer and until recently, each and every one was sawed out, wired and mounted on the lens that was still missing. That means wiring them 28,000 times and mounting them just as often.
The researchers have streamlined this process by developing a new way to access the electrical contacts. Now, the wiring process is faster and the entire camera system is smaller. The trick lies in the fact that they do not reach the contacts of each individual image sensor via the side any more but rather, simultaneously, with all sensors via their reverse side while they are still connected as a wafer. 
That means that you no longer have to mount the individual lenses. Instead, you can connect them with the image sensor wafers as lens wafers. Only then is the stack of wafers sawed apart into individual microcameras. 
Another upside is the fact that it supplies razor-sharp pictures even with very thin endoscopes. To date, the camera systems built into them had to be divided because of their size. The lens was at the tip of the endoscope and the sensor at the other end of the glass fiber strand. The new microcamera is small enough for the tip of the endoscope. It has a resolution of 62,500 pixels and transmits the image information through the endoscope via an electrical cable and measures 1mm x 1mm x1mm.
It is not only medical technology, but also the automotive industry that is interested in this tiny camera. Presently, they are researching the possibility of replacing outside rearview mirrors on cars with microcameras. This would reduce flow resistance and energy consumption. Beyond this, installed in fittings, this camera would be able to calculate the driver’s eye movements and prevent him from nodding off for a few seconds. “Starting in 2012, using Fraunhofer’s expertise, we will be able to bring disposable endoscopes to market for only a few euros – we already have the prototype,” said Stephan Voltz, CEO of Awaiba.
Enhanced by Zemanta