All the latest quantum computer articles

See the latest stories on quantum computing from eeNews Europe
Showing posts with label Data Communications. Show all posts
Showing posts with label Data Communications. Show all posts

Wednesday, February 03, 2016

Membrane lasers embedded in CMOS for high speed communications

By Nick Flaherty www.flaherty.co.uk

A new type of ultra-thin semiconductor laser under development at The University of Texas at Arlington can be embedded into mainstream same silicon substrates to provide increased capacity and energy efficiency.
Weidong Zhou, UTA electrical engineering professor, is working to develop a new ultrathin semiconductor laser that will increase the chip's speed and capacity. A three year grant from the US Army Research Office will develop a membrane laser less than one micron thick that is compatible with planar CMOS platforms. The key innovation is the integration of certain compound semiconductor material with a silicon photonic crystal cavity, which allows a laser to be built directly on a silicon chip next to other electrical components. This leads to higher speed and higher efficiency.
The first application of Zhou’s laser is in data centres, and the group is pursuing various membrane laser architectures for extreme energy efficient computing and communication systems. “We are looking for devices and components to be integrated on a chip,” said Zhou. “As we address electrical injection, integration with other devices on the chip and increased power capabilities, we can begin to apply this technology to products in the medical field or in the consumer arena. These applications could include portable electronics, sensing and imaging equipment, bio applications and wearable electronics.” 
“Big companies like IBM and Intel are using this technology for high-performance computing centres,” Zhou said. “The big push now is for the next big thing: smaller, faster, and less and less power consumption.”

Wednesday, March 23, 2011

ZTE shows record-breaking 10Tbit/s data link

Push to 400Gbit/s systems drives need for 10Gbit/s trunking

By Nick Flaherty www.flaherty.co.uk

Chinese telecoms equipment maker ZTE has broken the previous world record for single-channel data transmission with a recorded single-channel rate of 10Tbit/s over 640km of single-mode fibre optic cable. This is the equivalent of sending 160 HD movies per second.
The results of the test transmission were presented at the recent OFC/NFOEC conference in Los Angeles and lays a foundation for future research into optical transmission technology with higher single-channel rates at the heart of the internet of the future based on ZTE's patented  “carrier generation technology”. This generates 112 coherent and frequency-locked optical sub-carrier signals; with each sub-carrier bearing 100Gbit/s optical signals, and successfully achieved optical signals with a single-channel rate of 11.2Tbit/s, a net 10Tbit/s line rate plus overheads such as forward error correction (FEC).
In an era where the global optical communications industry is entering 100Gbit/s transmission, all mainstream manufacturers are not only promoting the practical deployment of 100Gbit/s but also actively seeking candidate technologies at higher bit rates of 400Gbit/s, 1Tbit/s, and beyond. With rapid growth in demand for higher bandwidth, single channel 10Tbit/s will be the transmission rate for future telecommunication networks.
The ZTE paper was the only post-deadline paper presented by a Chinese company at the conference and the company sees this as confirming its position as a global technology leader in the fibre communications transmissions over competitors such as Huawei.
“With OFC’s acknowledgement of our research results in 100G and beyond-100G technology, we will go on to invest further efforts in high-speed optical transmission and apply further research results in the pending global deployment of 100G technologies,” said Fan Xiaobing, General Manager of ZTE’s bearer network product line.

Enhanced by Zemanta

Wednesday, December 29, 2010

Five reasons why we won't see IBM's holographic display in five years - video

By Nick Flaherty www.flaherty.co.uk


IBM has released its prediction of five key technologies for the next five years, and on the whole they are pretty sound: fuel cell batteries are here and making headway in a number of markets, the smart grid will take existing technologies and apply them to wide area power systems, sensors will be everywhere (absolutely!) and smart algorithms can take the pain out of commuting - so far, so good. But the one that IBM has chosen to headline is holographic phone calls (and mobile ones at that).

IBM says:
In the next five years, 3-D interfaces – like those in the movies – will let you interact with 3-D holograms of your friends in real time. Movies and TVs are already moving to 3-D, and as 3-D and holographic cameras get more sophisticated and miniaturized to fit into cell phones, you will be able to interact with photos, browse the Web and chat with your friends in entirely new ways.

Scientists are working to improve video chat to become holography chat - or "3-D telepresence." The technique uses light beams scattered from objects and reconstructs a picture of that object, a similar technique to the one human eyes use to visualize our surroundings.

This is nonsense for a number of reasons:

  1. Photonics doesn't scale. We haven't been able to make photonics scale like silicon - researchers have been trying for 20 years to make the photonic computer, and are still trying. It will take more than 5 years to make commercial, large scale photonic technology small enough for the home, let alone the mobile
  2. Photonics won't be cheap enough. As it doesn't scale, it's also going to be hard to make it cheap enough. There are LED projectors now but there's some large steps to take to make this a consumer product
  3. It's too power hungry for mobile. And not low cost enough. Or small enough. It won't make the home, let alone the mobile.
  4. Video calling is only just taking off. It has taken 20 years for the idea of 2D video calling to take off. A lack of standards and a social resistance is only just being overcome with Skype in the office (not in the living room even now) and Facetime on the Apple 4. There is still a lot of resistance to installing a projector in the home that will take a lot to overcome. 
  5. It's the face, stupid. Apple is driving video calling through the face - being able to see the other person's expression. That's not what the 3D system provides. 
That's not to say it won't be incredibly useful, just not in the home. The key is that the engineers at IBM Research are working on new ways to visualize 3-D data, working on technology that would allow engineers to step inside designs of everything from buildings to software programs, running simulations of how diseases spread across interactive 3-D globes, and visualizing trends happening around the world on Twitter – all in real time and with little to no distortion. 
This is where the technology will take off, where size, cost and power are less important than visualising large amounts of data. From there it make its way into the home office with new projectors, but this will take more than five years to happen.


Related articles


Enhanced by Zemanta

Tuesday, May 25, 2010

ST moves to 32nm for networking chips

By Nick Flaherty www.flaherty.co.uk


Industry’s first Serializer-Deserializer (SerDes) IP in 32nm demon to customers 

STMicroelectronics has launched a 32nm technology platform for the design and development of leading-edge application-specific integrated circuits (ASICs) for networking applications. Central to the new 32nm SoC design platform, which implements ST’s 32LPH (Low-Power High-performance) process technology, is the industry’s first Serializer-Deserializer (SerDes) IP available in 32nm ‘bulk’ silicon.
Enabling very large ASIC designs, greater than 200mm2, ST’s new 32nm 32LPH ASIC design platform enables an unprecedented mix of high performance, high complexity, low power consumption and reduced silicon real estate per functional block. The platform is designed to accelerate the development of next-generation networking ASICs used in high-performance applications such as enterprise switches, routers and servers as well as optical cross-connect and wireless infrastructure applications.
“With the introduction of the 32LPH platform, ST is enabling the next generation of equipment for communication infrastructure applications, which requires highly integrated ASICs that can satisfy the increasing demand in performance, while also meeting extremely challenging power consumption and silicon integration goals,” said Riccardo Ferrari, Group Vice President and General Manager of ST’s Networking and Storage Division. “We are extremely encouraged by the strong interest that customers are demonstrating for this platform, which has already gained key design wins.”

ST’s SerDes IP, called S12, is a key piece of intellectual property that has already been successfully demonstrated in labs at selected key customers. The S12 IP is vital for the development of ASICs for networking applications and enables chip-to-chip, chip-to-module and backplane communications in networking equipment designs.
“ST is the first silicon supplier to bring a full design platform in a 32nm bulk-silicon process technology to the communication infrastructure market, including a next-generation predictive ASIC top-down design methodology, together with a full set of proven IP, such as a SerDes and embedded DRAM, successfully developed over many years by ST in previous technology nodes,” said Philippe Magarshack, Technology R&D Group Vice-President, Central CAD & Design Solutions GM, STMicroelectronics. “ST’s Technology R&D center in Crolles, France, has been instrumental in accelerating the completion of the 32LPH platform where low-power technology meets the high-performance requirements of networking applications, while still enjoying all the cost benefits of high-volume manufacturing. In addition, we have partnered with selected EDA vendors to offer networking customers the benefits of a predictable ASIC turnaround time, including fast virtual physical prototyping, and 32nm-class timing, signal and power integrity sign-off.”
The first ASIC prototypes implemented in ST’s 32LPH process technology are expected early in 2011 with production ramp-up in the second half of 2011.
Further Technical Information
ST’s 32LPH (Low-Power High-performance) design platform for networking applications supports up to 10 metallization layers to increase routing efficiency. The platform is based on the 32nm High-K Metal Gate process developed within the framework of the ISDA alliance, but also incorporates specific IP and devices from ST, such as embedded DRAM with 10-Mbit per square millimeter density and Ternary Content Address Memory (TCAM).
A SerDes (Serializer-Deserializer) is normally integrated multiple times (often up to 200) in a single ASIC chip. It enables serial communication between:

  • ICs, or ASICs, on the same electronic printed-circuit board (Chip-to-Chip);
  • ASICs and the Optical Module, which links to remote equipment (Chip-To-Module);
  • ASICs and Physical Interface Module (Chip-To-Module); or
  • ASICs and the system backplane - the backplane is the internal physical rack inside equipment in which all the system cards are mounted.

ST’s S12 IP macro, which is based on ST’s proven SerDes architecture, can be scaled up to eight 12.5-Gbit/s transmit/receive (Tx/Rx) channels per macro. The S12 has been designed with an optimal footprint for flip-chip BGA packages, and will soon be followed by ST’s S14 IP, which can reach up to 14-Gbit/s transmission speed.

Reblog this post [with Zemanta]

Thursday, May 06, 2010

ALPS Aims Low Power Wireless Module at WiFi Smart Meters

WiFi automation networks set to take off

ALPS Electric has developed  an all-in-one WLAN module for wireless networks. The module’s built-in CPU and networking protocol combined with low energy consumption enables easy setup of sensor or other device networks, such as those used for smart meters.
Sensor network systems promote efficient energy usage by monitoring power consumption, temperature, humidity and lighting, and using collected data to control devices. Use of these networks is expanding into areas such as communication between appliances and smart meters in homes, energy-saving management for corporations, temperature control in server rooms, security, disaster prevention and plant factories. Zigbee applications have already been launched, yet with an environment increasingly ready for WiFi infrastructure, needs are developing for easily configurable, low-cost wireless network systems.
ALPS has created an all-in-one wireless LAN module to meet market needs, integrating the GainSpan-developed compact “GS1011” chip featuring an antenna, WiFi protocol and connection applications. In addition, the module provides a UART physical interface, ADC, I²C, PWM, and GPIO analogue/digital port which allow direct connection with devices such as humidity and lighting sensors. The product’s internal CPU chip eliminates the need for a host CPU or development of a network stack on the set device side. These features enable easier wireless network configuration while reducing development time and design resources for sensor devices.
Due to low energy consumption and power management functions, the module is able to operate for up to 10 years on a single AA type lithium thionyl chloride battery. Furthermore, the product’s serial interface connection allows wireless LAN capability to be integrated into devices and systems not originally equipped for networking. The module is suitable for medical instruments, healthcare devices such as weight scales, and real-time locating systems serving logistics and entry control management.

The module features:
  1. All-in-one type with built-in antenna, wireless LAN and application processor
  2. Single battery operation and low power consumption current (5μA or less on standby)
  3. Autonomous operation without a host CPU is possible
  4. Japan certification
Principal Applications
  • Smart meter and home appliance communication, factory air conditioning management, environmental management in plant factories, etc.
  • Security sensor communication, disaster prevention management, home condition management, etc.
  • Health care devices, medical instruments, real-time location information systems (logistics, and entry control systems), etc.
Reblog this post [with Zemanta]

Tuesday, April 27, 2010

GE Satellite provide Ku data uplinks to NASA unmanned science mission

Ex-military UAV flies across Pacific taking measurements



GE-Satellite, a leading provider of satellite services in the Pacific, was recently chosen by NASA to provide Ku-band satellite connectivity for its ground breaking science mission to study atmospheric and environmental conditions across in the Pacific via Unmanned Aerial Vehicle (UAV). 
The NASA Global Hawk Pacific (GloPac) campaign, the first Earth Science mission to use the UAV for atmospheric and environmental research, demonstrates GE-23's capability to support a broad range of mobile broadband applications in the Pacific.
The GE-23 satellite, ideally suited for the mission because of its dynamic coverage in the Pacific, enabled continuous communications throughout the Global Hawk's 14-hour maiden voyage. “The Global Hawk's ability to autonomously fly long distances and remain aloft for extended periods brings a new capability to the science community for measuring and observing large areas of the Earth,” said NASA.
The Global Hawk payload includes an antenna to allow it to continuously transmit data and images via the GE-23 satellite. As part of the environmental research mission, scientists measured atmospheric conditions including greenhouse gases, ozone-depleting substances, aerosols, and constituents of air quality in the upper troposphere and lower stratosphere.  Future missions include observations from the equator to the Arctic Circle, and west of Hawaii.
“We are thrilled to be a part of the NASA Global Hawk mission and this exciting new chapter of science history,” says Andrew Jordan, President and CEO of GE-Satellite.
NASA has three Global Hawks, all previously used by the US Air Force, now fitted with 11 scientific instruments to conduct atmospheric research. The Hawks carry over than 400Kg of scientific gadgets, can operate at altitudes up to 65,000 feet and stay aloft for 30 hours while flying a distance of more than 12,600 miles - making the long range continuous measurements possible for the first time.
Reblog this post [with Zemanta]

Texas Instruments embraces Linux for C64x DSP processors

Reflects embedded industry move to open source
TI has announced Linux kernel support for its TMS320C64x digital signal processors (DSPs) and multicore system-on-chips (SoCs) targeted for applications such as communications and mission critical infrastructure, medical diagnostics, and high-performance test and measurement. As customers move towards open source initiatives as a key element of their products, application developers can benefit from the availability of Linux on TI’s  DSPs by having less software to develop, and focusing more on differentiating features and software in their applications.

“TI’s C64x processors have an enviable footprint in signal processing oriented high-performance multicore applications,” said Olaf Soentgen of Nash Technologies. “The introduction of Linux support expands the utility of the C64x DSP processors into portions of these applications that traditionally have been reserved for RISC cores. We are taking advantage of Linux availability on TI’s SoC to lower the cost and simplify the development of femtocell base stations.”
TI’s C64x Linux effort is a community collaboration with considerable support already in place. As part of the effort to port the Linux kernel to the C64x ISA, Code Sourcery is developing a complete tool chain including support for the GNU Compiler Collection (GCC) and the GNU Project Debugger (GDB). The project’s goal is that both the C64x Linux kernel and the GCC / GDB tools will be accepted by kernel.org and the Free Software Foundation, making both fully supported as open source community projects. In addition, TI will sponsor a Linux-C64x portal and a community-oriented distribution program to facilitate communication and development around this technology.  ENEA is making its open source, scalable multicore communications stack available to the C64x Linux community, as well as offering advanced multicore platform software and debugging tools.  Nash Technologies is implementing features ranging from advanced chip level functions, such as multicore interprocessor communications, to complete LTE protocols.  PolyCore Software, also an early community participant, is implementing the MCAPI multicore communications framework.
 “Our customers are rapidly moving towards open source as a critical element of their solutions,” said Brian Glinsman, general manager of TI’s communications infrastructure business. “Because of the C64x-basedDSP processors’ low power consumption and cost effectiveness, customers are interested in running traditional DSP MAC/PHY and codec algorithms as well as classic RISC control code and protocols on our DSPs. TI’s embracing of Linux and an open tool chain for the industry workhorse C64x DSP processor makes this kind of integration practical.”

Availability
Product support for the C64x Linux kernel will be available for TI’s TMS320C6472, TMS320C6474, TMS320C6455 and TMS320C6457 DSP processors in 3Q10.
Reblog this post [with Zemanta]

Dust Networks launches ARM Cortex-M3 system chip for 802.15.4

World's lowest power RF so far

Dust Networks is an intersting company as a leading supplier of wireless sensor networks (WSN). It is using the low power ARM Cortex-M3 processor for a new family of system-on-chips (SoCs) that include an on-chip power amplifier (PA) that will be the basis for a variety of upcoming standards-based WSN products, including IEC 62591 (WirelessHART), 6LOWPAN (IP), and Zigbee PRO products. This is key for the development of the SmartGrid.
The SoCs will feature:
  • A 32-bit ARM Cortex-M3 processor and rich interfaces enable a powerful computing platform while conserving power.
  • The world's lowest power IEEE 802.15.4 radio: a new benchmark is set, with a mere 3 mA transmit at 0 dBm and 3 mA receive current, delivering 5-10 times the battery life of competing technologies, and further expanding the applicability of energy harvesting power sources.
  • Extended range capabilities, with up to 8 dBm output power on-chip PA and an optional external power amplifier.
  • The industry's first IEEE 802.15.4E-ready product, incorporating the emerging standard for time synchronization and channel hopping, while providing legacy support for 802.15.4-2006.

"Our new SoCs are geared to deliver the highest performance while running at a fraction of the power of competing silicon," said Dr. Kris Pister, Chief Technologist at Dust Networks. "In selecting the ARM Cortex-M3 processor for our SoC, we did not have to trade-off performance for power. Dust Networks new IEEE 802.15.4 SoCs will require less than one-tenth of the energy per operation of comparable SoCs."

The level of systems integration in the SoCs is very high, including on-chip power amplifier, DC-to-DC converter, 10 bit ADC and a built in temperature sensor. With configurations up to 512kB of flash and 72kB of RAM, these SoCs will have both the highest computational horsepower of any 802.15.4 chip on the market, and the lowest power consumption. In doze mode, with full processor state and RAM retention, current consumption is under 1uA.

"Low power radios such as IEEE 802.15.4 and wireless mesh networking, epitomized by Dust Networks' TSMP protocol and its "Smart Dust" roots, have transformed the industrial wireless sensor network landscape", said Mareca Hatler, ON World research director. "With the introduction of ultra low power versions of SmartMesh IP (6LoWPAN) systems and ZigBee products, Dust Networks will expand the growing number of 'Smart World' applications that span Smart Buildings, Cities, Government and Homes."

Reblog this post [with Zemanta]

Wednesday, April 21, 2010

Xintronix gears up for expansion (UK Technology Startups)

Xintronix gears up for expansion (UK Technology Startups)

Bristol startup Xintronix has raised private finance and appointed a new chairman as it ramps up for samples of its high speed transceiver technology later this year for USB3 and LightPeak.

Monday, April 19, 2010

Radiometrix launches low cost multichannel ISM radio modem

Enable implementation of simple, 9600bps wireless links

The TXL2 transmitter and RXL2 receiver modules, from London-based wireless solutions developer Radiometrix, are half duplex multi-channel OEM radio modems offered in the company’s popular SIL standard footprint. Operating in the European license-free 433 MHz ISM (Industrial Scientific and Medical) frequency band, with a choice of 5 user programmed channels, these products can be employed to form transparent one-way radio data links supporting data rates of 9600 bps over a line-of-sight range of 500 m (typical).
Unlike raw FM radio module alternatives, these modules take care of preamble, synchronisation, bit balancing, error checking, and noise squelching, as well as all transmit timing, valid data identification and datastream buffering activities. This allows a data link to set be set up with the minimum of engineering effort. Each module can be assigned 1 of 8 unique addresses, so that a multiple radio link network can be established, provided no two modules are attempting to transmit at the same time on same channel.
The transmitter has an output power of 10 dBm (10 mW), while the receiver has a sensitivity of -107 dBm. The modules require a 5 V power supply, drawing just 28 mA for transmitting and 22mA for receiving. They have an operating temperature range of -20 °C to +70 °C.
Both the transmitter and receiver comply with EN 300 220-2 and EN 301 489-3 standards. Key applications for these modules include handheld/portable terminals, industrial/commercial telemetry systems, data loggers, and in-building environmental monitoring systems.

About Radiometrix
Founded in 1985, London-based Radiometrix has become a leading global developer of low power VHF and UHF radio modules for licence-exempt and licensed frequency bands. It highly experienced engineering team produce products for a wide variety of applications, with both customized and off-the-shelf solutions available through its global sales and distribution network.


 

Reblog this post [with Zemanta]

Wednesday, February 03, 2010

Cambridge Consultants launches Bluetooth development kit

DEVA hardware platform enables developers to quickly design and test differentiated Bluetooth products

Cambridge Consultants has launched a comprehensive development platform for the rapid development of highly differentiated Bluetooth products and mobile accessories.  The DEVA platform allows electronics and software engineers to rapidly prototype and test accessory products that deliver new features for users before committing to final product hardware.  By accessing the full power of the BlueCore-5-Multimedia device from CSR, it enables the development of highly differentiated products that maintain very low product cost.
DEVA can be used to develop a range of novel Bluetooth products - from mobile phone accessories and headsets, including for Apple’s iPhone, to wireless payment systems, industrial remote control devices, sports activity monitors or telehealth sensors that can be compliant with the Continua Health Alliance’s guidelines.

The key value of the DEVA platform is that has been optimised to work with all of Cambridge Consultants’ existing software tools and libraries, including its generic Bluetooth tool, xIDE for Interface Express, its Continua Compliant wireless health platform, VENA, and its Internet service accessory platform, CatchNet.  DEVA can also be used with CSR’s BlueLab development suite.

DEVA provides developers with access to the comprehensive features and processing power of CSR’s market leading BlueCore-5-multimedia chip.  DEVA includes a 128x128 monochrome LCD display, three user-interface buttons and LEDs allowing rich user interfaces to be developed for the product.  With USB, Serial and MicroSD interfaces for data integration, a range of GPIO, and both digital and analogue stereo audio connection, DEVA can support the development of complex products that have the lowest possible cost in their final manufactured form.  Being battery powered, DEVA provides a completely wireless experience.
“DEVA has been designed to provide a comprehensive environment for the development of sophisticated Bluetooth products,” said Tim Fowler, Commercial Director at Cambridge Consultants. “Not only does it speed the development of new versions of established Bluetooth products such as headsets with added capabilities, but it is also enabling the rapid development of new devices in many more diverse markets - medical applications are one example.  We have used our extensive experience in this market to deliver a development platform that gives designers a real head start in creating truly differentiated products.”
Reblog this post [with Zemanta]