All the latest quantum computer articles

See the latest stories on quantum computing from eeNews Europe
Showing posts with label Semiconductor device fabrication. Show all posts
Showing posts with label Semiconductor device fabrication. Show all posts

Wednesday, September 29, 2010

Shipments of Silicon to Jump 23.6 Percent in 2010

By Nick Flaherty www.flaherty.co.uk
Global silicon shipments in terms of square inches will rise to record levels in 2010, according to semiconductor manufacturing market research firm iSuppli.
 
Shipments of silicon for semiconductor manufacturing in 2010 will grow by 23.6 percent year-over-year, reaching 8.9 billion total square inches, up from 7.2 billion square inches in 2009, iSuppli forecasts. By 2014, 12.4 billion total square inches of silicon will be shipped.
However, while this is good news for filling fabs, it doesn't necessarily follow through to the average selling price (ASP) and the health of the industry. There is a fine balance between demand for silicon and production - too much silicon, low prices; too much demand and not enough siliocn - high prices. 
“Following the recession of late 2008 and 2009, chip manufacturers spent the first half of 2010 striving to reverse the damage they had suffered,” said Len Jelinek, director and chief analyst for semiconductor manufacturing and supply at iSuppli. “Visibility in the second half of 2010 remains limited even as the all-important holiday season inches closer. The good news is that barring any new collapse, silicon suppliers will have sufficient orders on the books to carry them through the third and fourth quarters. And while growth in 2011 won’t match the high expansion rate seen in 2010, iSuppli anticipates that the semiconductor industry will require additional increases in silicon shipments of about 13 percent compared to 2010 shipment rates to meet the projected development.”
Outperforming the industry
The demand for silicon in 12-inch wafers continues to rise at a rate that will outperform the industry average for silicon through 2014. In order to maintain growth, however, silicon suppliers must continue to expand 12-inch wafer manufacturing.
Beyond 2010, iSuppli expects to see a greater emphasis on shifting to even more 12-inch wafer manufacturing. Specifically, mixed signal and other technologies will be moving to 12-inch wafers as a result of older 12-inch tools no longer being cost effective for the manufacturing of leading-edge technology products.
Over the next five years, the availability of additional mature manufacturing capacity and tools will accelerate the conversion to 12-inch wafer manufacturing for products such as analog and mixed signal devices.
Enhanced by Zemanta

Tuesday, May 25, 2010

ST moves to 32nm for networking chips

By Nick Flaherty www.flaherty.co.uk


Industry’s first Serializer-Deserializer (SerDes) IP in 32nm demon to customers 

STMicroelectronics has launched a 32nm technology platform for the design and development of leading-edge application-specific integrated circuits (ASICs) for networking applications. Central to the new 32nm SoC design platform, which implements ST’s 32LPH (Low-Power High-performance) process technology, is the industry’s first Serializer-Deserializer (SerDes) IP available in 32nm ‘bulk’ silicon.
Enabling very large ASIC designs, greater than 200mm2, ST’s new 32nm 32LPH ASIC design platform enables an unprecedented mix of high performance, high complexity, low power consumption and reduced silicon real estate per functional block. The platform is designed to accelerate the development of next-generation networking ASICs used in high-performance applications such as enterprise switches, routers and servers as well as optical cross-connect and wireless infrastructure applications.
“With the introduction of the 32LPH platform, ST is enabling the next generation of equipment for communication infrastructure applications, which requires highly integrated ASICs that can satisfy the increasing demand in performance, while also meeting extremely challenging power consumption and silicon integration goals,” said Riccardo Ferrari, Group Vice President and General Manager of ST’s Networking and Storage Division. “We are extremely encouraged by the strong interest that customers are demonstrating for this platform, which has already gained key design wins.”

ST’s SerDes IP, called S12, is a key piece of intellectual property that has already been successfully demonstrated in labs at selected key customers. The S12 IP is vital for the development of ASICs for networking applications and enables chip-to-chip, chip-to-module and backplane communications in networking equipment designs.
“ST is the first silicon supplier to bring a full design platform in a 32nm bulk-silicon process technology to the communication infrastructure market, including a next-generation predictive ASIC top-down design methodology, together with a full set of proven IP, such as a SerDes and embedded DRAM, successfully developed over many years by ST in previous technology nodes,” said Philippe Magarshack, Technology R&D Group Vice-President, Central CAD & Design Solutions GM, STMicroelectronics. “ST’s Technology R&D center in Crolles, France, has been instrumental in accelerating the completion of the 32LPH platform where low-power technology meets the high-performance requirements of networking applications, while still enjoying all the cost benefits of high-volume manufacturing. In addition, we have partnered with selected EDA vendors to offer networking customers the benefits of a predictable ASIC turnaround time, including fast virtual physical prototyping, and 32nm-class timing, signal and power integrity sign-off.”
The first ASIC prototypes implemented in ST’s 32LPH process technology are expected early in 2011 with production ramp-up in the second half of 2011.
Further Technical Information
ST’s 32LPH (Low-Power High-performance) design platform for networking applications supports up to 10 metallization layers to increase routing efficiency. The platform is based on the 32nm High-K Metal Gate process developed within the framework of the ISDA alliance, but also incorporates specific IP and devices from ST, such as embedded DRAM with 10-Mbit per square millimeter density and Ternary Content Address Memory (TCAM).
A SerDes (Serializer-Deserializer) is normally integrated multiple times (often up to 200) in a single ASIC chip. It enables serial communication between:

  • ICs, or ASICs, on the same electronic printed-circuit board (Chip-to-Chip);
  • ASICs and the Optical Module, which links to remote equipment (Chip-To-Module);
  • ASICs and Physical Interface Module (Chip-To-Module); or
  • ASICs and the system backplane - the backplane is the internal physical rack inside equipment in which all the system cards are mounted.

ST’s S12 IP macro, which is based on ST’s proven SerDes architecture, can be scaled up to eight 12.5-Gbit/s transmit/receive (Tx/Rx) channels per macro. The S12 has been designed with an optimal footprint for flip-chip BGA packages, and will soon be followed by ST’s S14 IP, which can reach up to 14-Gbit/s transmission speed.

Reblog this post [with Zemanta]

Tuesday, December 22, 2009

Arizona State stacks nanoscale memory chips

Researchers improve chip memory by stacking cells

Researchers at Arizona State University have developed an elegant method for significantly improving the memory capacity of electronic chips.
The researchers have shown that they can build stackable memory based on 'ionic memory technology' which could make them ideal candidates for storage cells in high-density memory. Best of all, the new method uses well-known electronics materials.
“This opens the door to inexpensive, high-density data storage by ‘stacking’ memory layers on top one another inside a single chip,” said Michael Kozicki, an ASU electrical engineering professor and director of the Center for Applied Nanoionics. “This could lead to hard drive data storage capacity on a chip, which enables portable systems that are smaller, more rugged and able to go longer between battery charges.”
“This is a significant improvement on the technology we developed two years ago where we made a new type of memory that could replace Flash, using materials common to the semiconductor industry (copper-doped silicon dioxide). What we have done now is add some critical functionality to the memory cell merely by involving another common materia – silicon.”
Kozicki outlined the new memory device in a technical presentation he made in November at the 2009 International Electron Devices and Materials Symposia in Taiwan. Kozicki said that given current technology, electronics researchers are fast reaching the physical limits of device memory. This fact has spurred research into new types of memory that can store more information into less and less physical space. One way of doing this is to stack memory cells.
Kozicki said stacking memory cells has not been achieved before because the cells could not be isolated. Each memory cell has a storage element and an access device; the latter allowing you to read, write or erase each storage cell individually.
“Before, if you joined several memory cells together you wouldn’t be able to access one without accessing all of the others because they were all wired together,” Kozicki said. “What we did was put in an access, or isolation device, that electrically splits all of them into individual cells.”
Up until now, people built these access elements into the silicon substrate.
“But if you do that for one layer of memory and then you build another layer, where will you put the access device,” Kozicki asked. “You already used up the silicon on the first layer and it’s a single crystal, it is very difficult to have multiple layers of single crystal material.”
The new approach does use silicon, but not single crystal silicon, which can be deposited in layers as part of the three-dimensional memory fabrication process. Kozicki said his team was wrestling with how to find a way to build a diode into the memory cell. The diode would isolate the cells.
Kozicki said this idea usually involves several additional layers and processing steps when making the circuit, but his team found an elegant way of achieving diode capability by substituting one known material for another, in this case replacing a layer of metal with doped silicon.
“We can actually use a number of different types of silicon that can be layered,” he said. “We get away from using the substrate altogether for controlling the memory cells and put these access devices in the layers of memory above the silicon substrate.”
“Rather than having one transistor in the substrate controlling each memory cell, we have a memory cell with a built-in diode (access device) and since it is built into the cell, it will allow us to put in as many layers as we can squeeze in there,” Kozicki said. “We’ve shown that by replacing the bottom electrode with silicon it is feasible to go any number of layers above it.
With each layer applied, memory capacity significantly expands.
“Stackable memory is thought to be the only way of reaching the densities necessary for the type of solid state memory that can compete with hard drives on cost as well as information storage capacity,” Kozicki said. “If you had eight layers of memory in a single chip, this would give you almost eight times the density without increasing the area.”
Reblog this post [with Zemanta]