All the latest quantum computer articles

See the latest stories on quantum computing from eeNews Europe
Showing posts with label telecoms. Show all posts
Showing posts with label telecoms. Show all posts

Tuesday, May 17, 2011

Samsung sets up European LTE operation in UK

Exclusive organization covering the whole of Europe for mobile broadband equipment

By Nick Flaherty www.flaherty.co.uk

Samsung has set up a specialist organization, the Europe Network Operations (ENO), as a centre of 4G business in Europe. The ENO will be based in Samsung’s European HQ in Chertsey, UK.
In addition, the ENO plans to cooperate with European operators to find the most effective methods to handle mobile data traffic. Tailored to the business plans and local requirements of operators, Samsung will offer relevant, innovative solutions and progress field trials. The ENO will work to enhance LTE expansion in the European market.
Along with strengthening its presence in the region, Samsung aims to increase awareness of its field-proven LTE solution and is introducing its Smart LTE solution. This provides customized solutions which maximize and optimize the capability and usage of operators' existing network resources, reducing the overall cost of investment.
Through the use of intelligent radio resource allocation technology, Samsung’s Smart LTE solution improves the overall network capacity and coverage. The solution also enables high quality voice and data services in dense urban areas and rural environments while reducing the required number of base stations.
Samsung is also planning to extend the use of its multi-standard base station, capable of supporting LTE, Mobile WiMAX, WCDMA, GSM and CDMA within a single platform, reducing costs and saving time for operators migrating networks.
"We believe that ENO will play a pivotal role for Samsung in helping us achieve significant 4G LTE success in Europe, through the introduction of our advanced LTE technologies," said Youngki Kim, Executive Vice President and General Manager of Telecommunication Systems Business of Samsung Electronics. “Building on our 30 years of experience in the telecommunication systems industry, Samsung will prove that it’s the most reliable partner in Europe, as we have done all around the globe."
Based on the wide range of field experience of OFDMA technology, Samsung has successfully won 7 commercial LTE contracts and partnered with more than 30 global operators. Samsung has also established a strong position in the 3GPP (3rd Generation Partnership Project) standardization process. Samsung is one of the most influential network solution providers in the project, chairing three positions and three vice-chair positions across various working groups in the 3GPP. Additionally, Samsung owns more than 25% of total LTE IPR (Intellectual Property Rights) related to OFDMA technology, demonstrating its high levels of innovation in this field.
Enhanced by Zemanta

Monday, January 10, 2011

Conexant sold off to SMSC

Creates group with 900 mixed signal engineers
By Nick Flaherty www.flaherty.co.uk


How are the mighty fallen. The once powerful embedded chip maker Conexant Systems - spin off of Rockwell and dominant supplier of modem chips - is to be sold off to up and coming chip maker SMSC of New York.
Conexant leaves the industry with a string of legacies through a number of spin offs, from foundry Jazz to telecom chip maker MindSpeed, but the core of chips for imaging, audio, embedded modem, and video surveillance applications will go to to SMSC in a deal valued at approximately $284 million including the assumption of Conexant’s net debt. The transaction has been approved by the boards of directors of both companies.
The company had been selling off parts of the business for several years, and last month sold property next to its Newport Beach, California, headquarters for $23m

Combined Company Highlights:
  • Creates a stronger analogue/mixed-signal R&D team with over 900 engineers globally,
  • Complementary connectivity product portfolios to target more expansive set of computing, consumer, industrial and automotive applications,
  • Serves key customers with more complete product solutions,
  • Combined company has the scale and resources to enhance SMSC’s finances with a combined revenue of $632m,
  • Anticipated cost cutting of $8 to $10m by the end of SMSC’s fourth quarter
The combination of Conexant’s imaging, audio, embedded modem and video products with SMSC’s broad connectivity solutions targeting the computing, consumer, industrial and automotive markets provides for a highly complementary merger of talent and technology. Conexant has approximately 600 employees worldwide, including over 230 in Asia.
“We believe that combining the growth potential of Conexant and SMSC will allow us to leverage complementary technology and engineering resources to provide our customers with expanded solutions in connectivity and content,” said Christine King, President & Chief Executive Officer of SMSC. “We plan to focus our resources on the areas of highest return and believe that our respective sales and supply chain relationships will help create a platform to grow our businesses. In addition, we expect to capture significant operating efficiencies that will position us to increase earnings growth. SMSC’s larger scale should position us to increase our R&D productivity and drive profitability and shareholder value.”
“In our industry, size and scope provide a significant advantage with customers and suppliers," said Scott Mercer, Conexant's Chairman and Chief Executive Officer. "SMSC and Conexant share similar core competencies in analog and mixed-signal design, possess complementary product portfolios, and count many customers in common. By joining forces, we get the opportunity to take advantage of economies of scale and drive profitable growth."
Sailesh Chittipeddi, currently President & Chief Operating Officer at Conexant, will join SMSC upon close of the acquisition as Executive Vice President, reporting to Christine King. Mr. Chittipeddi’s responsibilities will include all product lines and global marketing and engineering functions for SMSC.

Enhanced by Zemanta

Friday, August 06, 2010

OIF project to shrink tunable laser modules for 100G networks

By Nick Flaherty www.flaherty.co.uk

The Optical Internetworking Forum (OIF) is developing a specification for a micro-integrable tunable laser assembly (uITLA). This new form factor for tunable lasers is needed as the industry moves to an XFP form factor with reduced power dissipation.
The new uITLA project will propose changes to the assembly electrical interfaces, optical specifications, and mechanical specifications and provide an alternative laser solution for ITLA customers contemplating the integration of a specific vendor “gold box” laser on the host PCB due to space constraints. The aim is to cut the real eastate used on the base plate area by half compared to today's ITLA-MSA-1.2 modules.
Enhanced by Zemanta

Friday, April 30, 2010

NetLogic Microsystems and TSMC Collaborate on 28nm Process Technology

Includes analogue capability for high speed interfaces 
Network processor developer NetLogic Microsystems  is working with leading foundry TSMC to extend their existing collaboration to include TSMC’s NEXSYS 28HP (28nm high performance) semiconductor process node. This will be used for NetLogic’s next-generation knowledge-based processors, multi-core processors and 10/40/100Gigabit PHY.
As an early development partner, NetLogic is using TSMC’s 28nm node to raise networking infrastructure performance and significantly differentiating its product line from the competition.In June 2009 Netlogic bought RMI (Raza Microsystems) to add a range of high performance multicore network processors to its range. 
NetLogic has launched advanced product development for multiple industry-leading product lines on the TSMC 28nm node. The 28HP process offers significant speed, and power efficiency advantages over previous process nodes. In addition, NetLogic Microsystems is developing a suite of custom high-performance circuits optimized around TSMC’s 28nm node, including high-speed serial interface technology, analogue and clocking circuitry, core processing elements and other standard cells, as well as refining the design and tape-out flow for this advanced node.
“By being a consistent early adopter across four generations of process technology, NetLogic Microsystems has consistently provided very high performance and low power products for mission-critical network infrastructure systems,” said Rick Cassidy, president of TSMC North America. “We welcome the extension of our close relationship to include NetLogic Microsystems’ role as an 28nm early technology adopter.”
“We are proud to have been one of the early partners for TSMC in 80nm, 55nm, 40nm and now 28nm for our best-in-class knowledge-based processors, multi-core processors and 10/40/100 Gigabit PHY product families,” said Ron Jankov, president and CEO at NetLogic Microsystems. “By combining the superior design and architecture of our products with TSMC’s proven leadership and track record in advanced manufacturing technologies, we are able to deliver highly innovative products with unprecedented performance, scalability and energy efficiency to our customers.”
NetLogic Microsystems offers high-performance multi-core, multi-threaded processors, knowledge-based processors, content processors, and high-speed 10/40/100 Gigabit Ethernet PHY solutions. These market-leading products are designed into high-performance systems such as switches, routers, wireless base stations, security appliances, networked storage appliances and service gateways to significantly enhance the performance and functionality of next-generation 3G/4G mobile wireless infrastructure, data center, enterprise, metro Ethernet, edge and core infrastructure networks.
Reblog this post [with Zemanta]

Wednesday, April 21, 2010

Xintronix gears up for expansion (UK Technology Startups)

Xintronix gears up for expansion (UK Technology Startups)

Bristol startup Xintronix has raised private finance and appointed a new chairman as it ramps up for samples of its high speed transceiver technology later this year for USB3 and LightPeak.

Wednesday, December 02, 2009

Global automotive telematics market to quadruple

Boom time as 68m cars ship with telematics by 2016



Global shipments of automotive telematics systems are set to rise to 84.4 million units in 2016, up by a factor of more than four from 19.3 million in 2008, according to iSuppli.
“From sending out an automatic distress call after a car crash, to enabling remote diagnosis of engine troubles, telematics can provide enormous benefits to motorists and car makers around the world,” said Anna Buettner, analyst with iSuppli’s automotive research service. “For drivers, telematics can enhance safety, convenience and connectivity. For car OEMs, telematics can add to and improve car functionality and reduce warranty and after-sales costs. That’s why carmakers and consumers are expected to increase their adoption of telematics systems rapidly during the next seven years.”
By 2016, 68.4 million cars will ship with telematics systems installed by OEMs, up from 14.3 million in 2008. This means that 84.6 percent of all cars shipped in 2016 will incorporate telematics systems.
Aftermarket shipments of telematics systems will rise to just under 16 million units in 2016, up from slightly less than 5 million in 2008.
Beyond accident alerts and remote diagnosis, telematics functions span from the wireless integration of third-party devices, to navigation and Location-Based Services (LBS) updates, to theft detection, to engine control software revisions.
The United States is the world’s leading market for telematics in 2009, with 30 percent of all models sold in the country available with installed systems. In comparison, the next two biggest telematics nations, Germany and Italy, have only 20 percent model availability of installed telematics systems.
The U.S. leadership is due to General Motors (GM), which pioneered installed telematics in 1996 with its OnStar service. The company has made OnStar a standard feature on all its cars this year.
“With GM selling 2 million cars with installed telematics per year, competitors have been forced to react,” Buettner said. “In the intervening years, Ford, BMW, Mercedes-Benz, Honda, Nissan and Toyota all launched telematics systems.”
Western European telematics volume remains low because no major OEM in the region has made the feature standard on every car. Japan also is deploying telematics in low volumes, and the applications are focused on navigation functionality and infotainment.
However, as telematics becomes more available in other regions, U.S. domination will dwindle. The United States in 2009 accounts for about half of the global installed OEM telematics market. By 2016, the United States will account for about one third of the worldwide market as shipments in other regions soar.

Embedded v. mobile device telematics

Two major types of telematics solutions are being offered on the market: embedded systems, whose functionality is integrated into the headunit of cars; and mobile-device oriented systems, which use a wireless product like a cell phone to communicate information.
Both embedded and mobile device telematics systems are on rapid growth paths. Worldwide OEM embedded telematics systems will grow from nearly 4.8 million units in 2008 to more than 26.8 million systems in 2016.
Meanwhile, global OEM mobile device telematics systems will grow from 9.5 million units in 2008 to more than 41.5 million systems in 2016.

Thursday, June 04, 2009

Intel buys Wind River

Intel is making a serious play into the truly embedded market with a $884m deal to buy real time operating system (RTOS) company Wind River Systems.
The board of directors of Wind River has unanimously approved the transaction which is expected to close this summer and then Wind River will report into Intel's Software and Services Group, headed by Renee James.
This is a key part of Intel's strategy to grow its processor and software presence outside the traditional PC and server market segments into embedded systems and mobile handheld devices, and Wind River is already a close partner with Intel, making use of its hardware virtualisation technology.
Wind River will become a wholly owned subsidiary of Intel and continue with its current business model.
"This acquisition will bring us complementary, market-leading software assets and an incredibly talented group of people to help us continue to grow our embedded systems and mobile device capabilities," said James at Intel. "Wind River has thousands of customers in a wide range of markets, and now both companies will be better positioned to meet growth opportunities in these areas."
"As a wholly owned subsidiary, Wind River will more tightly align its software expertise to Intel's platforms to speed the pace of progress and software innovation," said Ken Klein, Wind River Chairman, president and CEO. "We remain committed to continuing to provide leading solutions across multiple hardware architectures and delivering the same world-class support to which our customers have grown accustomed."
The acquisition will deliver to Intel robust software capabilities in embedded systems and mobile devices, from in-car "info-tainment" systems and other automotive areas, networking equipment, aerospace and defence to energy and thousands of other devices.

Wednesday, January 02, 2008

Handheld projectors start emerging


The problem of displaying information from ever smaller devices has been a major headache fro several years. Micromachined technology such as Texas Instruments' Digital Light Processor (DLP) have driven down the size of projectors to just-about-handheld (see previous stories) and now a new venture is tackling the same market.
Microvision of Redmond, Washington has developed a prototype of a truly handheld, battery powered projector (right) for mobile phones and personal media players that goes on show at the CES consumer electronics show next week (Jan 7th), although production is planned for the end of the year.
Code-named SHOW, Microvision's pico projector uses a single micromachined mirror (rather than TI's array of mirrors) and laser scanning to get the size down to 7mm thick and keep the power down. The images projected can range anywhere from 12 inches (30 cm) to 100 inches (2.5 m) in size depending upon the projection distance and are always in focus. The production version of the device is expected to offer approximately 2.5 hours of continuous battery life, sufficient to watch a full-length movie without a need for recharging.
Microvision says that SHOW can project a widescreen, WVGA (848 X 480 pixels), DVD quality image, compared to other miniature projectors that typically only offer QVGA resolution (320 x 240 pixels). The technology is already being used for a head-up display in development for cars.
"While mobile multi-media subscription services are on the rise, handset manufacturers, content providers and service providers view tiny cell phone displays as a barrier to stronger consumer adoption of their products and services,” said Alexander Tokman, President and Chief Executive Officer of Microvision. "SHOW is a significant milestone for Microvision and is proof that our technology is maturing according to plan and is close to being market-ready. Microvision's low-profile and low-power design, supported by leading supply chain partners, is very attractive to numerous mobile handset device manufactures, carriers and content providers. We believe that this milestone is meaningful not only for our company but for the industry at large," he said.

Wednesday, December 19, 2007

Shake up in the set top box business

Philips has sold its set top box and connectivity business to Pace Micro Technology of the UK in a move that will help Pace achieve the scale that it needs to compete effectively in global markets. The company has been struggling in recent years, although it has a stream of contracts from the US.
The deal also includes the connectivity business, and Pace has been a leader in this area aiming to integrate the connectivity around the home into the set top box to help maintain margins and prevent the business moving to low cost Chinese suppliers.
Philips agreed in principle to divest the STB and CS businesses to Pace in exchange for 70 million Pace shares. The proposed transaction is subject to approvals from Pace shareholders, the relevant regulatory authorities and Philips' workers council. After completion, Philips will become a 23% shareholder in the combined business, representing a market value of around £60m.
The outcome of the transaction will result in a combination of strengths of two leading players in the industry, creating one of the largest set-top-box players in the world at a time when the shift from analogue to digital TV is rapidly increasing. Commenting on the sale, Philippe Alcaras, Business Unit leader Philips Home Networks said: "We feel that the rapidly changing dynamics of the markets in which the STB and CS businesses operate will inevitably culminate in further industry consolidation. By striking a deal with Pace now, we gain the first-mover advantage and it shows Philips' determination to secure a leading role for our businesses, and make them even more relevant to our customers and technology partners."
The two businesses had estimated sales of EUR 425 million in 2007 and employed 335 people, predominantly based in France, who would transfer to Pace as part of the transaction. The remainder of Home Networks, Home Communications, which includes Internet Telephony and Home Telephony (DECT), will become part of the Peripherals & Accessories unit within Philips' Consumer Lifestyle sector.

Monday, November 05, 2007

It’s the tools, stupid! Microchip moves to 32bit with MIPS

Low cost microcontroller maker Microchip is moving to 32bits using the M4K architecture from MIPS Technologies.

This is a key move for both Microchip, whose PIC 8bit and 16bit microcontrollers are used in millions of places, and for MIPS, that has been missed in the early coverage of the story.

The key is the tools environment. Microchip gets a ready made ecosystem of debuggers and simulators, all of which are much more important in the 32bit space as the point of going to 32bits is to use off the shelf operating systems and readily available protocol stacks etc. These are all available for MIPS already, which is a stunning advantage for Microchip.

But there is also a huge benefit for MIPS, as there is now a tremendous potential installed base of designers who want to use Microchip controllers. This will work in two ways – it encourages and further strengthens the ecosystem and tool development as there are now hundreds of thousands of potential customers for the third party embedded software developers and for the tool vendors. Suddenly the MIPS ecosystem is now hugely viable. That plays into MIPS’ system on chip market, as a successful Microchip design can go to a single chip custom ASIC chip or semi-custom ASSP chip without changing the application software, providing an easier route to lower costs and higher volumes.

Microchip is using the M4K low end variant of the MIPS architecture which was announced last week along with a wide range of analogue peripherals to go around the core from MIPS' earlier acquisition of ChipIdea.

Industry comment to follow……

Thursday, August 23, 2007

VIA ships 1W x86 processor


To tackle deeply embedded and power sensitive applications, VIA has launched a 500MHz x86 processor that runs at under 1W.
The Eden ULV processor has been designed from the ground up to meet the low power requirements of a wide range of industrial, commercial and ultra mobile applications and has an idle power of 100mW.The 1W power level allows a 21mm x 21mm NanoBGA2 package to be used for more space sensitive applications.
The new processor can be combined with the ultra compact VIA CX700/M system media processor, an advanced all-in-one digital media chipset with a maximum operating power of just 3.5 watts, supporting a wide range of multimedia, connectivity and storage options and enabling system platforms with a maximum power of less than 10 watts.
It is being used by:

AAEON, Acrosser, Adlink, Advansus, Advantech, Aquila, Arbor, Avalue, Axiomtek, Biostar, Bona, Boser, Commate, E-TOP, Flexus, Freetech, Ibase, IEI, Inhand, IPOX, Kontron, Lanner, Liantec, Maple, Nexcom, Posiflex, Portwell, Termtek, Unication and Unicorn.

“With a maximum power of just 1W, the 500MHz VIA Eden ULV processor has finally brought x86 design into the realm of the embedded market,” said Richard Hung, Product Manager at Advantech. “This remarkably low power consumption has allowed our new PCM-4372 to provide all the power, performance and versatility of the x86 architecture to our customers.”


“The 500MHz VIA Eden ULV was the logical choice for our new 5.25” SBC, EBM-CX700 and B5 size slim PC, the ASM-CX700,” said Sam Wang, Vice-President of Avalue. “Now that VIA has brought to market an x86-based processor that doesn’t have the prohibitively high power consumption of other offerings, the benefits in terms of versatility, availability of compatible software and hardware, and performance can’t be overlooked.”


Integrated into the processor is the VIA StepAhead Technology Suite, which boasts an extensive array of performance-enhancing features including the VIA V4 bus at 400MHz, sixteen pipeline stages, branch prediction and an efficiency-enhanced 128KB full-speed exclusive L2 cache, ensuring the processor’s low power consumption doesn’t come at the expense of performance.
It also integrates VIA's PadLock Security Engine security tools to enable real-time military-grade encryption of data such as AES encryption, Secure Hash Algorithm SHA-1 and SHA-256, and a Montgomery Multiplier to accelerate the encryption process used under RSA and other public key transmissions as well as NX Execute Protection to prevent worms from propagating, and dual quantum based random number generators.

“Giving our customers the building blocks to create innovative systems and driving PC technology into new markets defines our ‘Small is Beautiful’ strategy,” said Richard Brown, Vice President of Corporate Marketing, VIA Technologies, Inc. “With its performance, energy efficiency and compact size, our new VIA Eden ULV processor provides a way for embedded developers to add real value to their systems and push the market forward.”

Tuesday, August 21, 2007

LSI shakeout continues with Infineon deal

The transformation of LSI Logic has settled down with the last remaining element - the GSM chip business - sold off to Infineon Technologies for what looks like a knock down price.
The E330m (£235m) deal is expected to close in Q4 and is for roughly the same as the project sales this year (the first six months saw sales of E150m), and Infineon expects a clearly positive EBITA contribution in 2008.
The 700 strong Mobility Products Group came from the April 2007 acquisition of Agere, and includes a design team and sales and marketing operation in Bracknell in the UK. Whether this becomes a standalone group for Infineon or merges with the Infineon design group in Bristol remains to be seen.
Another question is what this means for the comms element of the BlueOnyx strategy of a mobile server - that relied heavily on the Bluetooth and GSM element that came from the Mobility group, coupled with the storage capabilities of LSI. But buying in modules from a stronger player such as Infineon should not be a problem.
“Infineon’s strong commitment to the mobility market will ensure our customers continuity of the LSI product line, ongoing customer support and a broader portfolio of solutions to address their needs,” said Abhi Talwalkar, LSI president and chief executive officer. “LSI is fully committed to work with Infineon to provide a seamless transition for customers.”
Following the carve-out of Qimonda in 2006, Infineon is focusing on three key areas of business: Energy Efficiency, Communications and Security, having acquired Texas Instruments’ DSL CPE business earlier this year. In the Communication Solutions segment, Infineon has picked up new customers including Nokia, LG-Electronics, Panasonic and Samsung.

Friday, August 10, 2007

NI makes LabView multicore....

Embedded software tool vendor National Instruments has developed a multi-core version of its LabView graphical programming tool for the x86 architecture.
LabView 8.5 adds multicore support for PCs, embedded boards based on X86 processors and FPGA development systems. Running threads across multiple cores is allowing significant speed up of applications developed on the PC, such as test systems.
More importantly for embedded designed, NI has also made its real time operating system multi-core aware so that processes can be allocated to individual cores either manually or automatically to make the most of the system resources.
“Engineers and scientists depend on continually improving PC processors, operating systems and bus technologies to drive increased performance in their measurement and control systems,” said Dr. James Truchard, President, CEO and co-founder of National Instruments. “With the shift toward multicore processors on the PC, LabVIEW programmers benefit from a simplified graphical approach to multithreading, making it possible for engineers and scientists to maximise the performance of multicore technology with little to no change to their applications.”
With the parallel dataflow language of LabVIEW, users can easily map their applications to multicore and FPGA architectures for data streaming, control, analysis and signal processing. Building on the automatic multithreading capability of earlier versions, LabVIEW 8.5 scales user applications based on the total available number of cores and delivers enhanced thread-safe drivers and libraries to improve throughput for RF, high-speed digital I/O and mixed-signal test applications.

LabVIEW 8.5 also provides symmetric multiprocessing (SMP) with the LabVIEW Real-Time environment where designers of embedded and industrial systems automatically can load balance tasks across multiple cores without sacrificing determinism. With the latest version of LabVIEW, users can manually assign portions of code to specific processor cores to fine-tune real-time systems or isolate time-critical sections of code on a dedicated core. To meet the more challenging debugging and code optimisation requirements of real-time multicore development, engineers and scientists can use the new NI Real-Time Execution Trace Toolkit 2.0 to visually display timing relationships between sections of their code and the individual threads and processing cores where the code is executing.
The inherent parallelism of LabVIEW maps onto FPGA applications as well with an FPGA Project Wizard that automates I/O configuration, IP development and overall setup for common I/O, counter/timer and encoder applications. Using the FPGA Project Wizard, engineers and scientists can automate the generation of more complex high-speed DMA data transfer code. Additionally, LabVIEW 8.5 offers multichannel filtering and PID control functions commonly needed in machine automation to significantly reduce FPGA resources for high-channel-count applications.

Monday, July 23, 2007

Intrinsity goes for low power with ARM variant...

High performance logic company Intrinisty has used its high speed logic on the ARM cortex R4 core, but instead of gong for the highest possible speed has gone for a low power option.
This is producing twice the clock speed possible with traditional logic, so the Cortex R4X core will run at 600MHz on TSMC's 65nm LP process. The processor implementations uses Intrinsity’s Fast14 1-of-N Domino Logic (NDL) technology, which enables faster circuit speeds while minimizing power consumption and area.
This may well be an admission of defeat for Intrinsity, which has had a high performance MIPS version since it started 10 years ago now, but moved to a licensing model in 2004 and includes both processors and high speed memory.
“Intrinsity FastCores incorporate Fast14 technology, and we use this to enable breakthrough embedded processor performance with very low power consumption,” said Bob Russo, CEO, Intrinsity. “By working closely with ARM on the development of the Cortex-R4X processor implementations, together we will be able to reach a much broader base of designers who are looking for ways to achieve higher performance without sacrificing power efficiency and bring new SoCs to market quickly.”
Moving to a low power approach makes sense for ARM, and the R4X is aimed at storage, printer and networking applications, so taking on MIPS which is more dominant in these areas.
“Mass storage, printing and networking applications need ever increasing levels of performance to handle higher data rates, more media services and new functionality such as encryption,” said Graham Budd, executive vice president and general manager, Processor Division at ARM. “Through this relationship we can extend the performance range of the Cortex-R4 processor to meet these requirements and those of new market domains.”
All versions of the Cortex-R4 processor offer embedded Error Correcting Code (ECC) technology which monitors memory accesses to detect and correct errors, providing very high reliability and availability.
ARM says the Cortex-R4X processor implementations are available for licensing immediately, but will be shipped in Q1 next year. Expect other versions to follow, and an Intrinsity version of the Cortex A8 (the A8X perhaps, but more likely the A9) would hit 1.8GHz and perhaps top 2GHz on a high performance process.


... and sets up acquisition prospect


This technology looks vital to ARM, so expect Intrinsity to be an acquisition target. While it has licensed the technology to ATI (now part of AMD) and has investment from PowerPC licensee AMCC, neither of these are a major stumbling block to being part of ARM and fits well with the processor and IP design philosophy. If this proves popular, and there is little reason why not, then ARM cannot afford NOT to buy it.

Tuesday, July 17, 2007

VOIP struggling?

What's happening with Voice over IP? Just as it is reaching the mass consumer consciousness, there's a blip. The second largest standalone VOIP service provider, SunRocket (no I'd never heard of them either but they've been running since 1994 in the US) has closed without warning, reports Associated Press. if this was a small operator, that wouldn't matter, but with 200,000 subscribers it is second only to Vonage.
Now who knows what the situation is (AP didn't) but the company fired Chief Technology Officer Mark Fedor and Chief Information Officer Robert Kramer at the end of June and then the chief financial officer, David Samuels, resigned on 2nd July - never a good sign! It has since laid off all 200 staff at its US call centre as well.
This might be mismanagement, or internal 'problems', but hopefully not a technology issue and just a blip on the growth curve. But remember that IPTV is a good five years behind VoIP in its technology development.

Tuesday, July 10, 2007

FIC launches Linux touchscreen phone

A Taiwanese consortium Openmoko, led by embedded electronics giant FIC, has launched its Linux 'open' phone, Neo 1973, named after the year FIC claims the mobile phone was invented.

The Neo 1973 uses:

* 2.8" VGA TFT color display
* Touchscreen, usable with stylus or fingers (see the Hitachi story below)
* 266MHz Samsung System on a Chip (ARM-11 based SOC)
* USB 1.1, switchable between Client and Host (unpowered) - interesting!
* Integrated Assisted GPS
* 2.5G GSM – quad band, voice, CSD, GPRS
* Bluetooth 2.0
* Micro SD slot
* High Quality audio codec

This incarnation will not work as the applications are not available that the operators demand, but this is the start of a more open generation of mobile phones using Linux that will stimulate the eco-system of mobile phone applications (and viruses of course) and eventually drive down the costs of smartphones, but it will take many years! All credit to FIC for starting the ball rolling in a serious way, and these guys know how to manufacture in volume to a price!

e-paper set to boom, but only if it gets colourful

The e-paper display business will surpass US$2.0bn a year in five year and surpass $4 billion in 2014 according to a new report from market researchers NanoMarkets. It expects that the arrival of high-quality colour e-paper technology, better encapsulation and the ability to print large e-paper displays will create new opportunities in smart shelves, point-of-purchase (POP) displays, cell phone displays and disposable electronics.

Key findings include:
· Colour is the next big thing: Colour will enable e-paper to penetrate deeper into certain market segments including cell phone displays and signage and it will also help e-paper compete directly with OLED or LCD displays. The first e-paper technology developer able to commercialize colour e-paper at a reasonable price is likely to grab a huge share of the market
· Non-electrophoretic materials to gain market share: Both liquid crystals and electrochromic materials will grow in importance as platforms for e-paper, although e-paper displays based on electrophoretic materials will continue to take the largest share of the market. By 2014 e-paper made with electrophoretic materials will have reached almost $2.0 billion, with liquid crystal based e-paper at $1.5 billion and electrochromic e-paper at just under a $1.0 billion.
· More e-paper in cell phones: Cell phone sub-displays - and eventually main displays - are the high-volume opportunities for e-paper firms. Motorola has already been quite successful with its Motophone, the first cell phone to use e-paper. The best thing that e-paper makers have on their side in the cell phone market is the ability of their displays to be read in sunlight, an advantage that no other display technology can provide. By 2014 the cell phone sector will generate $763 million in e-paper display revenues.
· E-paper perfect for pricing displays: Smart shelves and POP displays are a "tremendous opportunity" for e-paper, enabling stores to change shelf prices from a central location for promotions, adjust for changes in wholesale pricing and make corrections when pricing on the shelves is incorrect. E-paper's low power consumption means this displays can be run from batteries and its flexibility makes it easy to fix to shelves and walls. By 2014, NanoMarkets expects e-paper to generate $1.2 billion from this sector.

Thursday, July 05, 2007

Widescreen VGA on mobile phones

Hitachi is shipping a wide VGA screen (see below on VGA screens coming through) to KDDI in Japan for its AU model, particularly for Web browsing. The 864 x 480 screen is an odd size but this allows full screen 800 pixel wide Web pages and leaves 64 pixels left on the side for icons!
QVGA is still dominant in Europe but Hitachi Displays is confident this will move over to WVGA once power consumption and content issues are addressed (which is why the story from QCT below on content!)

Wednesday, July 04, 2007

What's an iPhone? - the breakdown

Website ifixit.com to an iPhone apart to find out what was in it. Much of this has already been suggested (Marvell's wifi chip rather than Broadcom's, the Infineon S-Gold GSM/EDGE phone chip with ARM processor) but it is all in one place and confirms things like the memory and applications processor from Samsung, DAC from Wolfson in Scotland and Bluetooth from CSR in Cambridge, and power amplifier from SkyWorks.

This of course means that this stripped down variant of the OS X operating system for the iPhone (embedded OS X, if you like) has been ported to the ARM architecture for the Samsung chip, a 700MHz ARM1176JZF core, and so could run on TI's OMAP chips, for example, or many other ARM microcontrollers. This is potentially great news for embedded system designers. The bad news is that Apple as said it won't be released to the outside world. Shame.


The ifixit breakdown:

* Samsung chip underneath the metal shield on the left side of the board on the left. Ours reads K9MCGD8U5M. The 4 GB model that Think Secret took apart had K9HBG08U1M on it, which is a 4 GB chip.
* Samsung memory stacked with an ARM-architecture processor, Part number 339S0030ARM, 8900B 0719, NOD4BZ02, K4X1G153PC-XGC3, ECC457Q3 716 shows it to be a Samsung processor rather than a Mavell Xscale. The processor is likely stacked on the SDRAM, which could be two 512 Megabit chips. The processor could have H.264 and MP3 hardware decoding built in.
* The chip above the ARM is a Wolfson audio chip. Part numbers WM8758BG and 73AFMN5.
* The chip underneath the ARM is a Linear Technology 4066 USB Power Li-Ion Battery Charger, which Apple uses in the iPods as well.
* The chip on the bottom center has this text: MARVELL, W8686B13, 702AUUP. This is Marvell's 802.11b/g 18.4mm2 chip.
* The chip in the upper right is a Skyworks GSM/Edge Power amplifier (SKY77340)
* The silver chip to the left of the Skyworks chip reads CSR 41814 3A06U K715FB. This is a CSR BlueCore4-ROM WLCSP single chip radio and baseband IC for Bluetooth 2+EDR.
* The chip with the blue dot on it is rumored to be an Intel Wireless Flash 32 MB chip. Part numbers 1030W0YTQ2, 5716A673, and Z717074A. EE Times adds the part #PF38F1030W0YTQ2.
* The chip in the lower right some claim this is an Apple-branded chip, but it's purpose is currently unknown.
* The chip in the lower left is an Infineon PMB8876 S-Gold 2 multimedia engine. Part numbers: 337S3235, 60708, and EL629058S03.

VGA screens on a mobile phone

While mobile phone screens aren't large, phone makers are increasing the resolution to improve the quality of the user interface, particularly with games. The latest development system from Qualcomm shows what can be done with VGA, and they claim it's better than the Sony Playstation Portable (PSP). This is the system they send out to the software developers in advance of the handset designs and is a demo of the level of quality we will see in phones (of all kinds, not just Qualcomm ones) over the next year