All the latest quantum computer articles

See the latest stories on quantum computing from eeNews Europe
Showing posts with label education. Show all posts
Showing posts with label education. Show all posts

Monday, November 05, 2007

It’s the tools, stupid! Microchip moves to 32bit with MIPS

Low cost microcontroller maker Microchip is moving to 32bits using the M4K architecture from MIPS Technologies.

This is a key move for both Microchip, whose PIC 8bit and 16bit microcontrollers are used in millions of places, and for MIPS, that has been missed in the early coverage of the story.

The key is the tools environment. Microchip gets a ready made ecosystem of debuggers and simulators, all of which are much more important in the 32bit space as the point of going to 32bits is to use off the shelf operating systems and readily available protocol stacks etc. These are all available for MIPS already, which is a stunning advantage for Microchip.

But there is also a huge benefit for MIPS, as there is now a tremendous potential installed base of designers who want to use Microchip controllers. This will work in two ways – it encourages and further strengthens the ecosystem and tool development as there are now hundreds of thousands of potential customers for the third party embedded software developers and for the tool vendors. Suddenly the MIPS ecosystem is now hugely viable. That plays into MIPS’ system on chip market, as a successful Microchip design can go to a single chip custom ASIC chip or semi-custom ASSP chip without changing the application software, providing an easier route to lower costs and higher volumes.

Microchip is using the M4K low end variant of the MIPS architecture which was announced last week along with a wide range of analogue peripherals to go around the core from MIPS' earlier acquisition of ChipIdea.

Industry comment to follow……

Tuesday, June 12, 2007

Price and power war looms for ARM M3 microcontrollers


STMicroelectronics is pushing a new microcontroller based on the ARM Cortex-M3 core, the STM32 line, challenging start-up Luminary Micro which launched $1 parts last year.
The STM32F103 “Performance” line, with 72MHz clock frequency, or the STM32F101 “Access” line, with 36MHz clock frequency. Both lines offer from 32K to 128K of embedded Flash memory but differ in maximum SRAM size and peripheral combinations. At 72MHz, executing from Flash, the STM32 consumes only 36mA, which ST claims is the lowest power consumption in the 32bit market, corresponding to 0.5mA/MHz.
Luminary Micro were the first to launch an ARM Cortex microcontroller using the M3 core over a year ago, and now have 27 variants starting from $1, so there is tremendous price pressure in this market as ST's Access range starts at $1.80. Power figures for the Luminary parts are hard to come by as a lot of the figures are still pending, but from the data sheet the power is 115mW (Idd of 35mA at 3.3V for the LM3S101) or 5.75mW/MHz at 20MHz, which seems a substantial difference.
“Until now, 16bit and 32bit designers have often been faced with difficult choices, involving compromises between factors such as cost, power, and performance and whether to use industry-standard or proprietary platforms,” said Jim Nicholas, general manager of ST’s microcontroller division. “By eliminating the need to make these compromises, the STM32 will lead the obvious convergence of the 16bit and 32bit MCU markets.”
Peripherals on the ST parts include up to 128KB embedded Flash, up to 20KB of RAM, up to two ADCs (12-bit at 1 microsecond conversion time), up to three USARTs; up to two SPI (18MHz master/slave); up to two I2C; up to three 16-bit timers (4 input capture/4 output compare/4 PWM each) and a dedicated 6-PWM timer with embedded dead times for regulation and motor control vector drive applications, as well as USB, CAN, and seven DMA channels.
ST is pushing the low power applications such as medical glucose and cholesterol monitors as well as industrial PLCs, domestic appliances, domestic and industrial security, fire and HVAC systems, and consumer/PC applications such as card readers and biometrics.

Friday, May 25, 2007

Young Engineer of the Year deadline approaches

The deadline for the 2007 Young Engineer for Britain entries is approaching on May 31st.
This comes hot on the heels of the news that two previous year’s winners went on last week to scoop top prizes amounting to $19,500 at the Intel sponsored International Science and Engineering Fair (ISEF) in Alberquerque, New Mexico. Andrew Nowell (19) from Nottingham and David Badger from Sheffield won the right to travel to America as part of their prizes from the 2006 Young Engineer for Britain competition last September.
The Young Engineer for Britain has a £2,000 top prize and the opportunity to emulate Andrew and David’s success in America. Eleven regional judging events begin in Belfast on 12 June and finishes at the University of Sunderland on 17 July (see below) and each regional event itself offers a range of valuable prizes, including a new award from REKTN (Resource Efficiency Knowledge Transfer Network) for the project doing the most to sustain energy. The regional finals also provide the opportunity to qualify for the National Final, which takes place at the Annual Celebration of Engineering at the Old Royal Navy College in Greenwich on 17 September.
There are four awards categories in the competition and two eligible age
groups: 12 -16 and 16 -19. The awards categories are design and innovation; product development and marketability; engineering craftsmanship and finish; integration and application of electronics.
Regional winners in each of these categories can win £150, whilst national winners can win £800. Overall regional winners receive £200 and automatically qualify for the national final and there are a number of wild cards at the discretion of the panel judges, who are drawn from industry and who specialise in one or more of the judging criteria. All cash awards are shared between students and their schools.
Schools have been able to enter the 2007 competition on line at the Young Engineers’ web site www.youngeng.org.

Regional events:

Date - Region - Location
12/06/07 - Northern Ireland - Odyssey Centre, Belfast
21/06/07 - North West - Salford University
22/06/07 - Scotland - Crowne Plaza Hotel, Glasgow
28/06/07 - South East and London - Surrey University, Guilford
02/07/07 - South West - FAA Museum, Yeovilton
03/07/07 - East - Anglia University, Chelmsford
05/07/07 - East Midlands - Nottingham Trent University
06/07/07 - West Midlands - Thinktank at Millenium Point
10/07/07 - Yorks and Humberside - Kelham Island Museum, Sheffield
16/07/07 - Wales - Millenium Stadium, Cardiff
17/07/07 - North East - University of Sunderland

"There is still time to enter this major competition, which sets out to identify the nation’s top young engineering entrepreneurs. Much has been said about the importance of engineering to the future of the country and by entering this competition, students can make a vital start on this path,” said Young Engineers’ Project Manager, Joanne Phillips.