The embedded blog has been static for too long, and will be starting up again soon with regular input on the embedded market but with a sharper focus on embedded hardware technology.
At the same time a new blog has spun out to cover the portable multimedia market, taking the embedded hardware and software for portable systems from mobile phones to portable Internet devices and the middleware that makes them run, and adding the applications and operator perspective for a more complete, vertical analysis.
Please have a look at the beta of the PortableMultimediaBlog and let me know what you think, and keep coming back for the latest news and analysis for the embedded market here at the Embedded Blog.
All the latest quantum computer articles
See the latest stories on quantum computing from eeNews Europe
Showing posts with label comment. Show all posts
Showing posts with label comment. Show all posts
Tuesday, October 07, 2008
Monday, November 05, 2007
It’s the tools, stupid! Microchip moves to 32bit with MIPS
Low cost microcontroller maker Microchip is moving to 32bits using the M4K architecture from MIPS Technologies.
This is a key move for both Microchip, whose PIC 8bit and 16bit microcontrollers are used in millions of places, and for MIPS, that has been missed in the early coverage of the story.
The key is the tools environment. Microchip gets a ready made ecosystem of debuggers and simulators, all of which are much more important in the 32bit space as the point of going to 32bits is to use off the shelf operating systems and readily available protocol stacks etc. These are all available for MIPS already, which is a stunning advantage for Microchip.
But there is also a huge benefit for MIPS, as there is now a tremendous potential installed base of designers who want to use Microchip controllers. This will work in two ways – it encourages and further strengthens the ecosystem and tool development as there are now hundreds of thousands of potential customers for the third party embedded software developers and for the tool vendors. Suddenly the MIPS ecosystem is now hugely viable. That plays into MIPS’ system on chip market, as a successful Microchip design can go to a single chip custom ASIC chip or semi-custom ASSP chip without changing the application software, providing an easier route to lower costs and higher volumes.
Microchip is using the M4K low end variant of the MIPS architecture which was announced last week along with a wide range of analogue peripherals to go around the core from MIPS' earlier acquisition of ChipIdea.
Industry comment to follow……
This is a key move for both Microchip, whose PIC 8bit and 16bit microcontrollers are used in millions of places, and for MIPS, that has been missed in the early coverage of the story.
The key is the tools environment. Microchip gets a ready made ecosystem of debuggers and simulators, all of which are much more important in the 32bit space as the point of going to 32bits is to use off the shelf operating systems and readily available protocol stacks etc. These are all available for MIPS already, which is a stunning advantage for Microchip.
But there is also a huge benefit for MIPS, as there is now a tremendous potential installed base of designers who want to use Microchip controllers. This will work in two ways – it encourages and further strengthens the ecosystem and tool development as there are now hundreds of thousands of potential customers for the third party embedded software developers and for the tool vendors. Suddenly the MIPS ecosystem is now hugely viable. That plays into MIPS’ system on chip market, as a successful Microchip design can go to a single chip custom ASIC chip or semi-custom ASSP chip without changing the application software, providing an easier route to lower costs and higher volumes.
Microchip is using the M4K low end variant of the MIPS architecture which was announced last week along with a wide range of analogue peripherals to go around the core from MIPS' earlier acquisition of ChipIdea.
Industry comment to follow……
Monday, September 03, 2007
IBM stumbles onto single molecule switching

IBM nanotech researchers have stumbled onto something that may make a significant difference to the design and manufacture of logic devices in the future.
Researchers looking at the vibration of the Naphthalocyanine molecule found that they could use two hydrogen atoms in the organic molecule to switch states, providing an 1 or a 0. They have tried with many other molecules but previously it always changes shape which makes the switch unreliable.
“One of the beauties of doing exploratory science is that by researching one area, you sometimes stumble upon other areas of major significance,” said Gerhard Meyer, senior researcher in the nanoscale science group at the IBM Zurich lab. “Although the discovery of this breakthrough was accidental, it may prove to be significant for building the computers of the future.”
In the paper titled “Current-Induced Hydrogen Tautomerization and Conductance Switching of Naphthalocyanine Molecules,” in the US journal Science, IBM researchers describe the switching, and are saying that these molecular switches could one day lead to computer chips with speeds as fast as today's fastest supercomputers, but much smaller in size; with some speculating even building computer chips so small they could be the size of a speck of dust or fit on the tip of a needle.
The next step is to build a series of these molecules into a circuit, then figure out how to network those together into a molecular chip.
However, the trick is to propagate the state through multiple molecules to build logic gates where one molecule influences another, and that is difficult. I would also be surprised if this could be done at the kinds of speeds researchers are talking about and that the industry needs. Plus, this is an organic molecule and sensitive to heat, so there are many environmental issues to be tackled before we are anywhere near building computers out of single molecules of Naphthalocyanine.
Tuesday, July 17, 2007
VOIP struggling?
What's happening with Voice over IP? Just as it is reaching the mass consumer consciousness, there's a blip. The second largest standalone VOIP service provider, SunRocket (no I'd never heard of them either but they've been running since 1994 in the US) has closed without warning, reports Associated Press. if this was a small operator, that wouldn't matter, but with 200,000 subscribers it is second only to Vonage.
Now who knows what the situation is (AP didn't) but the company fired Chief Technology Officer Mark Fedor and Chief Information Officer Robert Kramer at the end of June and then the chief financial officer, David Samuels, resigned on 2nd July - never a good sign! It has since laid off all 200 staff at its US call centre as well.
This might be mismanagement, or internal 'problems', but hopefully not a technology issue and just a blip on the growth curve. But remember that IPTV is a good five years behind VoIP in its technology development.
Now who knows what the situation is (AP didn't) but the company fired Chief Technology Officer Mark Fedor and Chief Information Officer Robert Kramer at the end of June and then the chief financial officer, David Samuels, resigned on 2nd July - never a good sign! It has since laid off all 200 staff at its US call centre as well.
This might be mismanagement, or internal 'problems', but hopefully not a technology issue and just a blip on the growth curve. But remember that IPTV is a good five years behind VoIP in its technology development.
Friday, July 13, 2007
Nintendo aims to overtake Sony
The Wii is a great design and a lesson in providing what people want rather than the latest technology, but Nintendo is vulnerable to a downturn through being a one-trick company.
Nintendo is now aiming to overtake Sony's 120m-selling PlayStation2 - Nintendo sold 5.8 million units of the Wii by this March, and aims to sell another 14 million during the current business year to March 2008, which makes 20m this year, so it will take four to five years to beat the PS2. That's a long way off, and competition is fierce and Nintendo still hasn't sorted out it's production scheduling problems.
This just goes to show, rightly or wrongly, the madness and emotion of the stock market!
Wednesday, July 04, 2007
Wireless camera demo
At a recent 'Wireless Symposium', Cambridge chip startup Artimi was demonstrating its Wireless USB capability, linking a digital camera via a USB port to a dongle, to another dongle plugged into a PC. So my apologies for my face coming up on the screen!
Artimi is focusing on the cable replacement market, and linking things like external hard disk drives and cameras wirelessly.
Much as I wish them, and any chip startup, well, I worry that there isn't the margin in the market for these devices. Yes, they point to HDMI cables costing $70 to $100, and that's where companies such as Pulse-Link are aiming, and that makes sense. But will people pay $50 for a pair of dongles to replace a $5 cable? No.
So the issue comes down to the consumer equipment makers and getting these chips designed in - Artimi is claiming some success on this front, especially with the hard disk makers, and if we see this starting to happen by the end of the year, or Q1 next year (which is possible) then cable replacement becomes feasible.
Artimi is focusing on the cable replacement market, and linking things like external hard disk drives and cameras wirelessly.
Much as I wish them, and any chip startup, well, I worry that there isn't the margin in the market for these devices. Yes, they point to HDMI cables costing $70 to $100, and that's where companies such as Pulse-Link are aiming, and that makes sense. But will people pay $50 for a pair of dongles to replace a $5 cable? No.
So the issue comes down to the consumer equipment makers and getting these chips designed in - Artimi is claiming some success on this front, especially with the hard disk makers, and if we see this starting to happen by the end of the year, or Q1 next year (which is possible) then cable replacement becomes feasible.
Friday, June 29, 2007
iPhone leads to a lot of nonsense
Today's launch of the iPhone has given analysts a rush of blood to the head. In my analysis for Electronics Weekly, it seems that being able to watch TV on mobile phones has all the makings of a new technology bubble. It will come in time, but the initial rush and over-optimistic figures point to a flush of expectation rather than reality.Analysts are extrapolating from the success of Internet sites such as YouTube and the iPhone's predicted One Touch YouTube access to make predictions that are pure nonsense.
Recent presentations from ABI Research have predicted a growth in mobile TV subscribers from a million this year to 250 million in three years time. Were it to happen, this is a phenomenal growth rate and reminiscent of the worst excesses of the Internet bubble.
While the growth in YouTube subscribers is certainly true, there is no guarantee that people will pay to watch these videos over their mobiles. And pay they will have to, as this will be a revenue generating activity for both the websites and the operators.
Then there are predictions of HDTV on mobiles. The OMAP3 chip from Texas Instruments is adding this capability — and it may well be needed as showing a VGA video (or, worse, quarterVGA) on a large flatscreen looks horrible. But there are problems in downloading large HDTV clips to a phone, storing it on that phone, displaying it and then transferring it to a big display.
Does this mean that the phone will have to have an expensive mini-HDMI connector to plug into the back of your large LCD flatscreen display? Or are we waiting for an UltraWideBand wireless link to transmit a clip at 480Mbit/s over the two metres to the TV? If we are, we will have to wait quite a while for the technology in a form that can be integrated into both the phone and the TV.
There is a small but growing market for mobile TV — for viewing short clips of sport or news, for live action that you can’t wait to see and for boring trips on public transport.
These huge growth predictions do no one any favours and present the electronics business as a group of credulous fools who can be taken to the cleaners all over again by the financiers.
Wednesday, June 27, 2007
Where will the next semiconductor crash come from?
This has been something that has been concerning me for a while - life is good for the semi guys, but history shows the downturn will come, and it comes from unexpected places.
Traditional theory would predict that the new generation of 12in fabs with 45nm and 32nm coming through in 2009 would create over-supply of chips, driving down the average selling price and causing recession in the industry. But a close eye is kept on this to avoid the problem.
Instead, the problem will come from an unexpected direction - those 8in fabs. The semiconductor industry will face a glut of capacity in the next two years that will fundamentally change the way systems are designed, says the president of the consumer LSI division of Samsung Semiconductor, the second largest chip maker in the world.
"By 2010 the 8in fabs will become severely underutilised, by around 30%, and product pricing will be continuously slashed," said Oh-Hyun Kwon. "That creates a vicious cycle of no investment to how to utilise the fabs is a key point."
This is where the oversupply will come and where the prices will crash.
That oversupply of 130nm and 90nm capacity should be used for devices that don't shrink well such as analogue, RF, sensors and micro machined devices, he said. These are then combined with digital devices made in 45nm and 32nm in system in the same package, rather than integrating all these elements into a single chip.
But this will migrate to chips that are built with the different technologies on the same die in 3D layers, and will change the way chips are designed and packaged, with system-in-a-package becoming much more important.
"We are moving to 45nm circuits at 45nm and then to 3D transistors at 22nm, and we need on chip 3D analysis tools for 3D LSIs," he said.
Traditional theory would predict that the new generation of 12in fabs with 45nm and 32nm coming through in 2009 would create over-supply of chips, driving down the average selling price and causing recession in the industry. But a close eye is kept on this to avoid the problem.
Instead, the problem will come from an unexpected direction - those 8in fabs. The semiconductor industry will face a glut of capacity in the next two years that will fundamentally change the way systems are designed, says the president of the consumer LSI division of Samsung Semiconductor, the second largest chip maker in the world.
"By 2010 the 8in fabs will become severely underutilised, by around 30%, and product pricing will be continuously slashed," said Oh-Hyun Kwon. "That creates a vicious cycle of no investment to how to utilise the fabs is a key point."
This is where the oversupply will come and where the prices will crash.
That oversupply of 130nm and 90nm capacity should be used for devices that don't shrink well such as analogue, RF, sensors and micro machined devices, he said. These are then combined with digital devices made in 45nm and 32nm in system in the same package, rather than integrating all these elements into a single chip.
But this will migrate to chips that are built with the different technologies on the same die in 3D layers, and will change the way chips are designed and packaged, with system-in-a-package becoming much more important.
"We are moving to 45nm circuits at 45nm and then to 3D transistors at 22nm, and we need on chip 3D analysis tools for 3D LSIs," he said.
Wednesday, May 30, 2007
Scratching the Surface
Microsoft has followed the Apple lead and done some really neat software for the user interface (for once). The Surface is a table PC (which has been around in places like Bristol's Watershed for years) but now adds a touch screen software for that surface (hence the name).
One demo shows the use with a phone (above), linking automatically via Bluetooth when placed on the table and easily transferring pictures to and from the phone. Brilliant!
The other shows a group working on the same set of photos, moving and manipulating them by hand (below).
The main thing I would worry about is the lifetime of the touchscreen and the initial costs - for a lot of the corporate applications (with the high price) a vertical touchscreen seems better, and we have those already. The phone example, which needs a table, is more suited to the home or casual environment and I'm not sure this wil be priced for that market.
One demo shows the use with a phone (above), linking automatically via Bluetooth when placed on the table and easily transferring pictures to and from the phone. Brilliant!
The other shows a group working on the same set of photos, moving and manipulating them by hand (below).
The main thing I would worry about is the lifetime of the touchscreen and the initial costs - for a lot of the corporate applications (with the high price) a vertical touchscreen seems better, and we have those already. The phone example, which needs a table, is more suited to the home or casual environment and I'm not sure this wil be priced for that market.
Friday, May 25, 2007
Young Engineer of the Year deadline approaches
The deadline for the 2007 Young Engineer for Britain entries is approaching on May 31st.
This comes hot on the heels of the news that two previous year’s winners went on last week to scoop top prizes amounting to $19,500 at the Intel sponsored International Science and Engineering Fair (ISEF) in Alberquerque, New Mexico. Andrew Nowell (19) from Nottingham and David Badger from Sheffield won the right to travel to America as part of their prizes from the 2006 Young Engineer for Britain competition last September.
The Young Engineer for Britain has a £2,000 top prize and the opportunity to emulate Andrew and David’s success in America. Eleven regional judging events begin in Belfast on 12 June and finishes at the University of Sunderland on 17 July (see below) and each regional event itself offers a range of valuable prizes, including a new award from REKTN (Resource Efficiency Knowledge Transfer Network) for the project doing the most to sustain energy. The regional finals also provide the opportunity to qualify for the National Final, which takes place at the Annual Celebration of Engineering at the Old Royal Navy College in Greenwich on 17 September.
There are four awards categories in the competition and two eligible age
groups: 12 -16 and 16 -19. The awards categories are design and innovation; product development and marketability; engineering craftsmanship and finish; integration and application of electronics.
Regional winners in each of these categories can win £150, whilst national winners can win £800. Overall regional winners receive £200 and automatically qualify for the national final and there are a number of wild cards at the discretion of the panel judges, who are drawn from industry and who specialise in one or more of the judging criteria. All cash awards are shared between students and their schools.
Schools have been able to enter the 2007 competition on line at the Young Engineers’ web site www.youngeng.org.
Regional events:
Date - Region - Location
12/06/07 - Northern Ireland - Odyssey Centre, Belfast
21/06/07 - North West - Salford University
22/06/07 - Scotland - Crowne Plaza Hotel, Glasgow
28/06/07 - South East and London - Surrey University, Guilford
02/07/07 - South West - FAA Museum, Yeovilton
03/07/07 - East - Anglia University, Chelmsford
05/07/07 - East Midlands - Nottingham Trent University
06/07/07 - West Midlands - Thinktank at Millenium Point
10/07/07 - Yorks and Humberside - Kelham Island Museum, Sheffield
16/07/07 - Wales - Millenium Stadium, Cardiff
17/07/07 - North East - University of Sunderland
"There is still time to enter this major competition, which sets out to identify the nation’s top young engineering entrepreneurs. Much has been said about the importance of engineering to the future of the country and by entering this competition, students can make a vital start on this path,” said Young Engineers’ Project Manager, Joanne Phillips.
This comes hot on the heels of the news that two previous year’s winners went on last week to scoop top prizes amounting to $19,500 at the Intel sponsored International Science and Engineering Fair (ISEF) in Alberquerque, New Mexico. Andrew Nowell (19) from Nottingham and David Badger from Sheffield won the right to travel to America as part of their prizes from the 2006 Young Engineer for Britain competition last September.
The Young Engineer for Britain has a £2,000 top prize and the opportunity to emulate Andrew and David’s success in America. Eleven regional judging events begin in Belfast on 12 June and finishes at the University of Sunderland on 17 July (see below) and each regional event itself offers a range of valuable prizes, including a new award from REKTN (Resource Efficiency Knowledge Transfer Network) for the project doing the most to sustain energy. The regional finals also provide the opportunity to qualify for the National Final, which takes place at the Annual Celebration of Engineering at the Old Royal Navy College in Greenwich on 17 September.
There are four awards categories in the competition and two eligible age
groups: 12 -16 and 16 -19. The awards categories are design and innovation; product development and marketability; engineering craftsmanship and finish; integration and application of electronics.
Regional winners in each of these categories can win £150, whilst national winners can win £800. Overall regional winners receive £200 and automatically qualify for the national final and there are a number of wild cards at the discretion of the panel judges, who are drawn from industry and who specialise in one or more of the judging criteria. All cash awards are shared between students and their schools.
Schools have been able to enter the 2007 competition on line at the Young Engineers’ web site www.youngeng.org.
Regional events:
Date - Region - Location
12/06/07 - Northern Ireland - Odyssey Centre, Belfast
21/06/07 - North West - Salford University
22/06/07 - Scotland - Crowne Plaza Hotel, Glasgow
28/06/07 - South East and London - Surrey University, Guilford
02/07/07 - South West - FAA Museum, Yeovilton
03/07/07 - East - Anglia University, Chelmsford
05/07/07 - East Midlands - Nottingham Trent University
06/07/07 - West Midlands - Thinktank at Millenium Point
10/07/07 - Yorks and Humberside - Kelham Island Museum, Sheffield
16/07/07 - Wales - Millenium Stadium, Cardiff
17/07/07 - North East - University of Sunderland
"There is still time to enter this major competition, which sets out to identify the nation’s top young engineering entrepreneurs. Much has been said about the importance of engineering to the future of the country and by entering this competition, students can make a vital start on this path,” said Young Engineers’ Project Manager, Joanne Phillips.
Thursday, May 24, 2007
Qualcomm looks to put a micro display into Bluetooth headset
Communications chip maker QUALCOMM has teamed up with a Taiwanese Bluetooth headset maker to integrate Micro-Electro-Mechanical Systems (MEMS) displays into the next generation of Ubixon's stereo headsets.
The reflective displays, based on Interferometric Modulation (IMOD) technology, require no backlighting and can be viewed in bright sunlight and in a wide range of environments and are lower power than other display technologies, claims Qualcomm.
Details are very sketchy, but this sounds like a display attached to the earpiece, forming the User Interface (and these direct displays work better close to the eye).
The problem is then getting all that display data over the Bluetooth link, although with more memory in the earpiece it could just send updates. Great for a more static display, which would use less power and not be so sensitive to switching speed.
This also ties in well with Qualcomm's SnapDragon chip to add more computing to phones and consumer devices.
MEMS uses semiconductor-like and thin-film manufacturing processes to produce tiny and highly reliable mechanical devices for the displays with micron resolution.
"We are excited to work with Ubixon toward the common goal of delivering innovative solutions to end users," said Dr John Batey, vice president and general manager of QUALCOMM MEMS Technologies. "With the delivery of the industry's first direct view MEMS displays, we are providing technology that enables mobile devices to be used in more environments and for more hours per charge, thereby enhancing consumers' user experience."
More on the technology.
Ubixon started with headsets but is an emerging developer of ubiquitous portable consumer devices. Headquartered in Seoul, its parent company Uclick is a South Korea-based financial Internet portal and technology company.
The reflective displays, based on Interferometric Modulation (IMOD) technology, require no backlighting and can be viewed in bright sunlight and in a wide range of environments and are lower power than other display technologies, claims Qualcomm.
Details are very sketchy, but this sounds like a display attached to the earpiece, forming the User Interface (and these direct displays work better close to the eye).
The problem is then getting all that display data over the Bluetooth link, although with more memory in the earpiece it could just send updates. Great for a more static display, which would use less power and not be so sensitive to switching speed.
This also ties in well with Qualcomm's SnapDragon chip to add more computing to phones and consumer devices.
MEMS uses semiconductor-like and thin-film manufacturing processes to produce tiny and highly reliable mechanical devices for the displays with micron resolution.
"We are excited to work with Ubixon toward the common goal of delivering innovative solutions to end users," said Dr John Batey, vice president and general manager of QUALCOMM MEMS Technologies. "With the delivery of the industry's first direct view MEMS displays, we are providing technology that enables mobile devices to be used in more environments and for more hours per charge, thereby enhancing consumers' user experience."
More on the technology.
Ubixon started with headsets but is an emerging developer of ubiquitous portable consumer devices. Headquartered in Seoul, its parent company Uclick is a South Korea-based financial Internet portal and technology company.
Tuesday, May 22, 2007
V is for Venture Capital
A wonderful pastiche of the 'V is for Vendetta' and 'The Matrix' film genre from MBA students at UNC's Kenan-Flagler Business School in the US who have obviously talked to the more aggressive, grasping VC funds!
Includes classic lines like - "Remember - use 5 times EBITDA" and other sad phrases but highlights the challenge of dealing with people who are much more experienced with money!
Monday, May 21, 2007
Motorola mops up Modulus

Late last week saw Motorola continuing to strengthen its position in video by acquiring Modulus Video (I don't really think it's a merger, given the relative sizes of the companies).
These guys have been developing great video compression algorithms and systems purely focussed on H.264/AVC for IPTV, cable, broadcast and satellite systems, such as the ME2000 SD/HD encoder above, and has been working with Motorola for the last two years anyway.
This now combines Broadbus, Kreatel, Tut Systems and Netopia for an integrated, end-to-end video delivery system for multiple network architectures.
Great for the US, which is where it seems all the video attention is - we now need to see whether they will start taking Europe a bit more seriously, particularly as IPTV is being driven from here (which is why Kreatel was so important!)
As ever it will be a potential problem for existing Modulus partners such as Sencore, who supplied decoders to them, and other customers, although they were never big on saying who those customers might be.
More of a worry would be Mark Magee, the VP Technology & Chief Architect and Co-Founder, who has avoided Motorola before. He worked at Compression Labs Inc, which was acquired by Motorola / General Instrument, and was before co-founding Modulus Video, he was VP of Engineering for DiviCom (acquired by Harmonic). There he was the architect of the DiviCom MPEG-2 encoder and multiplexer and helped define and develop other DiviCom core products, leading a team of 180 engineers across three R&D centres: this is a man who has done the big teams and the startups and should not need to work now - keeping his expertise will be an interesting challenge for Motorola.
But hey: "Our team will benefit from Motorola's rich heritage and leadership of video delivery expertise," said Bob Wilson, Chairman and CEO of Modulus Video. "Modulus Video will bring to Motorola a software-centric platform that ensures flexibility, reduced cost and fast development time."
"Motorola is committed to offering an integrated, end-to-end video portfolio designed to meet the current and next-generation requirements of operators," said Dan Moloney, President, Home and Networks Mobility business at Motorola. "As consumers demand more high definition video and interactive services, the need for advanced compression technology is increasingly important. As part of its advanced real-time video encoding products, Modulus Video has a powerful architecture and product development framework that is well suited for continued technological advancement."
Tuesday, May 08, 2007
RFID to blockout DVDs?
NXP Semiconductor and Kestrel Wireless have teamed up to add RFID tags to consumer equipment, including DVDs, to prevent theft, in a very interesting story.
The key is that the RFID chips activate the equipment at the point of sale, so stealing them is useless. And it fits nicely into the existing point of sale infrastructure - so far, so good. Now this I can understand for an MP3 player, falt screen TV, even a electronic toothbrush, but how on earth does an RFID tag disable or enable a DVD, which is passive?
It turns out there is another factor floating around here - an electro-optic film has to be added to the DVD, and this is activated by the RFID tag. Now, there are some distinct issues here, not least the power required to activate the film quickly and effectively, which is not possible through existing point of sale RFID terminals. An then there is the cost of adding the film to the DVD (both in itself and the manufacturing process) which will be non-trivial - this is not just a piece of plastic on top of the disk. And what about reliability - will the film slowly darken over time?
I suspect there's a long way to go on this!
The key is that the RFID chips activate the equipment at the point of sale, so stealing them is useless. And it fits nicely into the existing point of sale infrastructure - so far, so good. Now this I can understand for an MP3 player, falt screen TV, even a electronic toothbrush, but how on earth does an RFID tag disable or enable a DVD, which is passive?
It turns out there is another factor floating around here - an electro-optic film has to be added to the DVD, and this is activated by the RFID tag. Now, there are some distinct issues here, not least the power required to activate the film quickly and effectively, which is not possible through existing point of sale RFID terminals. An then there is the cost of adding the film to the DVD (both in itself and the manufacturing process) which will be non-trivial - this is not just a piece of plastic on top of the disk. And what about reliability - will the film slowly darken over time?
I suspect there's a long way to go on this!
Wednesday, March 21, 2007
ARM monkeys around with FPGA core
It may seem like a strange joke for an engineer - When is an instruction set architecture not an instruction set architecture? Well, according to ARM, when it’s a ‘lightweight profile’.
ARM has developed a core, the Cortex M1, specifically targeted at the FPGA market, but is mucking around with the ISA - something that is usually sacrosanct
By using a three stage von Neuman architecture in the core, the Cortex M1 core takes up less space than the previous ARM7 core already available on Actel FPGAs.
This will also be aimed at large OEM equipment makers to take ARM licenses directly, rather than through an ASIC company or chip design.
The new core will be compatible with M3 cores used in low cost microcontrollers and high volume ASICs. It uses "a lightweight profile of the Thumb 2 instruction set," said Dominic Pajak, product manager for the processor division at ARM. This means that existing 32bit ARM code will not run on it, and 16bit Thumb 1 code will need additional 32bit instructions. New Thumb 2 code will run with no problems, and real time operating systems such as uClinux, Nucleus and ThreadX will also run on the core. So for new designs, that's fine, and obviously where ARM is aiming this, but existing code will have to be recompiled for the core.
This is important as there is lots of ARM code on ARM7 microcontrollers and in existing telecoms chips using ARM7 cores that could move to the new low cost FPGA families such as Altera's Cyclone 3 - see below.
The three stage von Neuman architecture, rather than a five stage Harvard architecture like other cores in the ARM family, reduces the size of the core dramatically to less than an 8051 or ARM7 core says Pajak. But this also means it runs at a relatively slow 72MHz, although this compares to just 25MHz for the ARM7 in an FPGA.
It is currently available on Actel's Fusion and proAsic families, taking up 20% of a 1m gate part or a third of a 600,000 gate Fusion part that includes analogue elements such as analogue to digital converters. A version for the low power Igloo family is expected at the end of the year.
The core is already part of the Actel design flow, supplied as a configurable black box that is tied to a particular part via a unique identification number and the core is included in the price of the chip without having to have a licence with ARM.
"The money comes out of the license we pay to ARM," said Vaughn Williams, managing director for Actel in Europe.
The core will be available on Xilinx and Altera parts, but only through direct deals between ARM and large OEM equipment companies. "For Xilinx and Altera users, ARM will license the RTL to selected OEMs, and currently we would license to the OEMs directly," said Pajak.
ARM has developed a core, the Cortex M1, specifically targeted at the FPGA market, but is mucking around with the ISA - something that is usually sacrosanct
By using a three stage von Neuman architecture in the core, the Cortex M1 core takes up less space than the previous ARM7 core already available on Actel FPGAs.
This will also be aimed at large OEM equipment makers to take ARM licenses directly, rather than through an ASIC company or chip design.
The new core will be compatible with M3 cores used in low cost microcontrollers and high volume ASICs. It uses "a lightweight profile of the Thumb 2 instruction set," said Dominic Pajak, product manager for the processor division at ARM. This means that existing 32bit ARM code will not run on it, and 16bit Thumb 1 code will need additional 32bit instructions. New Thumb 2 code will run with no problems, and real time operating systems such as uClinux, Nucleus and ThreadX will also run on the core. So for new designs, that's fine, and obviously where ARM is aiming this, but existing code will have to be recompiled for the core.
This is important as there is lots of ARM code on ARM7 microcontrollers and in existing telecoms chips using ARM7 cores that could move to the new low cost FPGA families such as Altera's Cyclone 3 - see below.
The three stage von Neuman architecture, rather than a five stage Harvard architecture like other cores in the ARM family, reduces the size of the core dramatically to less than an 8051 or ARM7 core says Pajak. But this also means it runs at a relatively slow 72MHz, although this compares to just 25MHz for the ARM7 in an FPGA.
It is currently available on Actel's Fusion and proAsic families, taking up 20% of a 1m gate part or a third of a 600,000 gate Fusion part that includes analogue elements such as analogue to digital converters. A version for the low power Igloo family is expected at the end of the year.
The core is already part of the Actel design flow, supplied as a configurable black box that is tied to a particular part via a unique identification number and the core is included in the price of the chip without having to have a licence with ARM.
"The money comes out of the license we pay to ARM," said Vaughn Williams, managing director for Actel in Europe.
The core will be available on Xilinx and Altera parts, but only through direct deals between ARM and large OEM equipment companies. "For Xilinx and Altera users, ARM will license the RTL to selected OEMs, and currently we would license to the OEMs directly," said Pajak.
Wednesday, March 14, 2007
Kafka-esque threat to IP video business
A strange story that could almost have been written by Kaftka comes from the Register on the importance of bandwidth caps on Internet services.
John Stith, a Comcast subscriber in Colorado, has had bizarre conversations with his Internet service provider (ISP), who says don't go over the download limit or we will cut you off without notice. What's the limit? We can't tell you? What's your name? I can't say. Can I speak to a supervisor? No. When he complains, he is told it's a prank call, then that it's not policy, but then is referred to the 'security' department who give him the same threat to cut him off.
Why does this matter? Because IP video sees this route to homes through the ISP as a new route for video distribution - see the stories on here from IBC in September form companies like Amino. Not only do the ISPs have a cap (which stops the video model) but those with 'unlimited' internet have invisible caps.
You could argue that this is in the fair use policy, but one large and growing part of the industry (Google, Youtube, Apple TV, TivO et al) are all pushing exactly this capability, which will come head to head with the service providers before long.
John Stith, a Comcast subscriber in Colorado, has had bizarre conversations with his Internet service provider (ISP), who says don't go over the download limit or we will cut you off without notice. What's the limit? We can't tell you? What's your name? I can't say. Can I speak to a supervisor? No. When he complains, he is told it's a prank call, then that it's not policy, but then is referred to the 'security' department who give him the same threat to cut him off.
Why does this matter? Because IP video sees this route to homes through the ISP as a new route for video distribution - see the stories on here from IBC in September form companies like Amino. Not only do the ISPs have a cap (which stops the video model) but those with 'unlimited' internet have invisible caps.
You could argue that this is in the fair use policy, but one large and growing part of the industry (Google, Youtube, Apple TV, TivO et al) are all pushing exactly this capability, which will come head to head with the service providers before long.
Thursday, March 08, 2007
Is Exradia snake oil?
Is the 'launch' of Exradia not all it seems? To me it has all the hall marks of a pump and dump operation - a fancy PR agency (Kinross & Render), an area that is of concern to consumers (mobile, protecting yourself from radio waves), big launches at trade shows (3GSM and CeBit), an odd structure and an odd past. All of these ring warning bells for me.
For Exradia (funded by wealthy private individuals, says the CEO) is actually a subsidiary of a US company that has been trying to sell this technology for nearly a decade now, including a joint venture to make phones in Germany. All of this isn't secret, but it's not highlighted.
So I had a long chat with the CEO, and unfortunately I am not convinced on the technology either. The technology is a low power, low frequency field that is meant to 'break up' the regular radio pulses that could be the cause of problems from mobile phones. Yes, several studies have pointed to the regularity of the pulses as the potential cause of problems. But the field does not stop the effect of the pulses - this is absolutely not like noise cancelling where you can cancel out the wave, but additive - but it will reduce the amplitude of the signal (but it's low power, so not by much). That is the only minor value I can see in the technology, and by the lack of success so far, I think the industry agrees with me.
The scary thing is the focus on the legal side - ie, if mobile phone makers don't take appropriate steps to minimise any effects they could be liable to future law suits. 'Is this the tobacco of the future' is the question the company promotes, and I feel there is an element of scaremongering in both the pitch to consumers and the pitch to the industry. Then the question comes down to how effective this technology is, and that has to go through properly organised, validated medical technology trials, NOT the university analyses that the company relies on.


Below: A GSM phone output
Right: Using Exradia technology to disrupt the signal
For Exradia (funded by wealthy private individuals, says the CEO) is actually a subsidiary of a US company that has been trying to sell this technology for nearly a decade now, including a joint venture to make phones in Germany. All of this isn't secret, but it's not highlighted.
So I had a long chat with the CEO, and unfortunately I am not convinced on the technology either. The technology is a low power, low frequency field that is meant to 'break up' the regular radio pulses that could be the cause of problems from mobile phones. Yes, several studies have pointed to the regularity of the pulses as the potential cause of problems. But the field does not stop the effect of the pulses - this is absolutely not like noise cancelling where you can cancel out the wave, but additive - but it will reduce the amplitude of the signal (but it's low power, so not by much). That is the only minor value I can see in the technology, and by the lack of success so far, I think the industry agrees with me.
The scary thing is the focus on the legal side - ie, if mobile phone makers don't take appropriate steps to minimise any effects they could be liable to future law suits. 'Is this the tobacco of the future' is the question the company promotes, and I feel there is an element of scaremongering in both the pitch to consumers and the pitch to the industry. Then the question comes down to how effective this technology is, and that has to go through properly organised, validated medical technology trials, NOT the university analyses that the company relies on.


Below: A GSM phone output
Right: Using Exradia technology to disrupt the signal
Thursday, March 01, 2007
Rollable screens in cell phones!
Love these pictures of phones with rollable screens (see multiple stories previously) that expand out from the basic phone housing. The rollable screen from Polymer Image is starting production at Innos in Southampton and could be used for cell phones.
If you think that's weird, Chinese phone maker ZTE has developed a concept phone with the same kind of idea - it used a rollable screen that unrolls in teh shape of a fan. Fantastic, you might say (sorry, couldn't resist!)

The latest semiconductor market analysis from Future Horizons points to the latest restatements of chip makers and the lowest month-on-month growth in ten years, which for the month of Christmas is not a good sign.
"Depending on whether you see the glass half full or half empty, the market is simply pausing or confirmation that the era of strong growth is over," said Malcolm Penn, CEO of Future Horizons. "The only real certainty in the semiconductor industry is its ability to constantly deliver uncertainty, and clearly Q4’s results were a test of vision and faith."
Friday, February 09, 2007
3GSM: Silicon Labs pulls out of mobile phone business
US chip maker Silicon Laboratories is pulling out of the phone chip business to concentrate on other areas such as FM chips and its traditional microcontroller business.
NXP Semiconductor will buy the Aero transceiver, AeroFONE single-chip phone and power amplifier product lines, for $285 million in cash.
“This transaction transfers a one of a kind business in the mobile handset market to NXP, a company with the necessary scale and resources to effectively compete long-term,” said Necip Sayiner, president and chief executive officer of Silicon Labs. “Strategically, this will enable us to focus on the most profitable and highest growth segment of our business, our core mixed-signal products."
My interpretation of this is the move by TI and Infineon into the low cost, single chip phone market for China and India, which will drive prices down, and that Silicon Labs hasn't managed to get a good enough foothold in there. So good for them. What I worry about is NXP trying to do the same, and it will have to compete on price.So it'll be a bloodbath, but the wider industry will benefit from lower cost silicon.
NXP Semiconductor will buy the Aero transceiver, AeroFONE single-chip phone and power amplifier product lines, for $285 million in cash.
“This transaction transfers a one of a kind business in the mobile handset market to NXP, a company with the necessary scale and resources to effectively compete long-term,” said Necip Sayiner, president and chief executive officer of Silicon Labs. “Strategically, this will enable us to focus on the most profitable and highest growth segment of our business, our core mixed-signal products."
My interpretation of this is the move by TI and Infineon into the low cost, single chip phone market for China and India, which will drive prices down, and that Silicon Labs hasn't managed to get a good enough foothold in there. So good for them. What I worry about is NXP trying to do the same, and it will have to compete on price.So it'll be a bloodbath, but the wider industry will benefit from lower cost silicon.
Subscribe to:
Posts (Atom)