All the latest quantum computer articles

See the latest stories on quantum computing from eeNews Europe
Showing posts with label microchip. Show all posts
Showing posts with label microchip. Show all posts

Thursday, August 11, 2016

Vital end-to-end encryption for embedded IoT applications uses Amazon

By Nick Flaherty www.flaherty.co.uk

Securing the Internet of Things is a key challenge that is vexing many designers.Developing a secure end-to-end solution all the way to the cloud can be extremely challenging with lots of different hardware and software involved. Often the IoT node developers leave this for the gateway, leaving the end points vulnerable.

This is why the Embedded Blog has focussed not only on the hardware and software of the embedded node, but the links up to, and through, the cloud such as crypto accelerator cards - Kalray Launches Krypto128 Accelerator Card. So Microchip's launch of an end-to-end security IoT module that connects directly to Amazon Web Services IoT (AWS IoT) is highly significant.
Microchip used its acquisition of Atmel to work with AWS to use the AWS mutual authentication IoT security model. This should help companies to implement these security best practices from evaluation through to production. The solution adds a high level of security, simplifies the supply chain, and is now one of the fastest ways to connect to the AWS Cloud. 

Currently, third-party manufacturers of devices that connect to AWS IoT service must take specific actions to comply with the advanced security model. First, they must pre-register their security authority to AWS servers in order to establish a trust model. Second, for each IoT device they must generate unique cryptographic keys that are mathematically linked to the pre-registered security authority. Finally, the unique device keys must remain secret for the life of the device. In volume production, the generation and secure handling of these unique keys can be a daunting challenge in the chain of manufacturing especially where third-parties with different trust and compliance levels are involved.
All of this is a bit of a nightmare, to say the least, and one key reason why IoT security has been such a big issue.

Instead, the AT88CKECC development kit will allow customers to meet the security standard of AWS’ mutual authentication model and easily connect to the AWS IoT platform during the evaluation and engineering phase. Then the AWS-ECC508 device assists with meeting security standards during the prototyping and pre-production phase. Finally, devices will be customised for production stages to ensure information security in customer applications.

Customers simply solder the device on the board and connect it over I2C to the host microcontroller which runs an AWS Software Development Kit (SDK). Once this is complete, there is no need to load unique keys and certificates required for authentication during the manufacturing of the device as the AWS-ECC508 is pre-configured to be recognised by AWS without any intervention. All the information is contained in a small (3x2 mm), easy to deploy, crypto companion device.
The ECC508 device has strong resistance against environmental and physical tampering including countermeasures against expert intrusion attempts. In addition, the device features a high quality random number generator, the internal generation of secure unique keys and the ability to seamlessly accommodate various production flows in the most cost-effective manner. A typical IoT device consists of a small 8-bit microcontroller, and is battery powered. It is typically constrained for resources such as central processing unit (CPU) performance to provide low latency responsiveness, memory and code space for security protocols and for how much power they consume in order to preserve battery life. The ECC508 device has a low-power processor-agnostic cryptographic acceleration for compatibility with the widest range of resource-constrained IoT devices.

The AWS-ECC508 kit (AT88CKECC-AWS-XSTK, above) is available today priced at $249 each. The AWS-ECC508 (ATECC508A-MAHAW-S and ATECC508A-SSHAW-T) is available in UDFN and SOIC packages and is available today for sampling and volume production.

See www.atmel.com/tools/at88ckecc-aws-xstk.aspx for more information

Monday, June 27, 2016

Microchip adds independent peripherals to PIC32

By Nick Flaherty www.flaherty.co.uk

Microchip has launched its first family of PIC32 microcontrollers with periperhals that can run independently of the core. This is a big step, as it helps to reduce power and simplify the development and operation of nodes in the Internet of Things (IoT) .

The MIPS MicroAptiv-based PIC32MM family bridges the gap between the company’s popular PIC24F XLP and PIC32MX families. But what makes this more significant is that the new family is the first PIC32 to feature core independent peripherals, designed to offload the CPU for lower power and lower system design cost. The PIC32MM devices are supported by the Microchip MPLA Code Configurator (MCC) to help simplify and accelerate designs.



Today’s embedded applications targeting the Internet of Things (IoT), consumer, industrial control, and motor control require flexible MCUs that consume less power, are more cost effective and have smaller form factors. For applications demanding low power and longer battery life, the PIC32MM has sleep modes down to 500 nA. Applications with space constraints will benefit from the small 4x4 mm package options. The PIC32MM devices include core independent peripherals such as Configurable Logic Cells (CLC) and Multiple-output Capture Compare PWMs (MCCPs) which help enable sensorless BLDC motor-control applications.

To help accelerate evaluation and development, a new $25 PIC32MM processor plug-in module is available (MA320020), which plugs into the $130 Explorer 16 Development Board (DM240001). The entire family of PIC32MM devices is supported by the Microchip MPLAB ecosystem including MPLAB X IDE and XC32 compiler. The MPLAB Code Configurator, a plug-in to the MPLAB X, helps with easy peripheral set-up, device configuration and pin mapping.

The PIC32MM family is available in mass production today in 20-pin QFN and SSOP; 28-pin µQFN, QFN, SOIC, SSOP, SPDIP; 36-pin QFN; and 40-pin uQFN packaging. Devices are available in 16 KB, 32 KB, and 64 KB Flash variants.

For more information, visit Microchip’s Web site at www.microchip.com/PIC32MM

Wednesday, February 24, 2016

Atmel launches new TinyAVR in a bid to protect product line in Microchip acquistion

By Nick Flaherty www.flaherty.co.uk

Atmel has launched what it says is the world’s highest performing, low power, 8-bit MCUs with 1kB Flash memory. 

The new ATtiny102/104 MCUs runs up to 12MIPS and integrate features previously only available in larger more expensive MCUs, aiming at smaller applications including logic replacement and the latest cost-optimised applications in the consumer, industrial and home automation markets.

The move appears to be an attempt to protect the AVR product line with the impending acquisition by Microchip. Microchip's PIC range of 8bit microcontrollers is also popular in the the same markets and it is distinctly possible that the AVR range will become a victim of the merging of the product lines. A spokesperson for Atmel declined to comment on the future of the line as the acquisition has not been completed.   

The majority of today’s 8-bit market growth is coming from applications that previously only required discrete components. With many of these new applications requiring simple intelligent functions including timing, motor control or on/off functionality, 8-bit MCUs are becoming an essential feature for the personal healthcare, small kitchen appliance and consumer markets, says Atmel. 

As a result the ATtiny102/104 AVRs integrate features such as self-programming for firmware upgrades; non-volatile data storage; accurate internal oscillator to provide more reliable motor control; high-speed serial communication with USART; operating voltages ranging from 1.8V to 5.5V, 10-bit ADC with internal voltage references; and sleep currents at less than 100nA in power down mode with SRAM retention.

“Atmel has already sold more units of its 8-bit AVR core-based MCUs than the 7.4 billion people on Earth,” said Oyvind Strom, Sr. Director of MCUs at Atmel. “We continue to expand our AVR portfolio with the new ATtiny102/104 8-bit MCUs. These are the first two devices in our new tinyAVR portfolio that are packed with features optimized for tiny, compact MCU systems such as LED lighting, fan control and other small applications.”

Key Features for Atmel's 8-bit tinyAVR MCUs
  • 1kB Flash / 32bytes SRAM
  • 8- and 14-pin packages down to 2mm x 3mm in size
  • Up to 12 MIPS at 12MHz
  • Self-programmable Flash
  • Accurate (±3%) Internal oscillator
  • Multiple calibrated internal voltage references (1.1V, 2.2V, 4.3V)
  • 10-bytes Unique ID (serial number)
  • USART
  • 10 bit ADC and analog comparator
  • 1.8V to 5.5V voltage range
  • -40°C to +105°C  and -40°C to +125°C temperature ranges


Development Kits and Ecosystem

To accelerate the design process, Atmel offers a low-cost Xplained Nano evaluation kit available for only $4.44 USD in the Atmel Store. The new kit includes a board with an ATtiny104, embedded programmer, access to all I/O, one push button and one LED. The ATtiny102/104 are supported by Atmel’s development ecosystem, including Atmel Studio 7, the integrated development environment (IDE) for developing and debugging both Cortex-M and AVR applications. 


Engineering samples are available today with mass production samples scheduled for May 2016.  


Monday, February 15, 2016

Microchip takes on mbed with cloud-based development tool

By Nick Flaherty www.flaherty.co.uk

Microchip has launched a cloud-based Integrated Development Environment (IDE) that will take on ARM's mbed online development tool and community directly.  

The MPLAB Xpress online development platform is an easy way to get started with PIC microcontrollers with zero downloads, sign-in or setup needed to start designing across the range of devices from the entry level 8bit through the MIPS 32bit controllers.   

The free, cloud-based IDE brings the most popular features of the award-winning MPLAB X IDE to Internet-connected PCs, laptops or tablets. A key factor is that MPLAB Xpress offers a comprehensive feature set, including a library of Microchip-validated code examples, interface to MPLAB Code Configurator (MCC) 3.0 for GUI-based MCU peripheral setup and automatic code generation, integrated MPLAB XC compilers, support for programmer/debugger hardware, and 10 GB of secure online storage with a myMicrochip account.  Users can easily migrate their projects to the full, downloadable MPLAB X IDE.  Additionally, the MPLAB Xpress Community enables developers to share their code, design ideas and knowledge.

Microchip's MPLAB Xpress cloud-based development tool 
Cloud-based hardware development is supported by connecting any USB-enabled PC, laptop or tablet to tools such as the MPLAB Xpress Evaluation Board.  This development board features an integrated programmer, a PIC16F18855 MCU and a mikroBUS header for system expansion with MikroElektronika’s boards.  The IDE also supports Microchip’s Curiosity Development Board, a cost-effective tool with integrated programmer and debugger, as well as expansion options for add-on boards and external connectivity.  The online IDE can also be used with Microchip’s PICkit 3 In-Circuit Debugger/Programmer, which provides programming and debugging capabilities for over 1,000 PIC MCUs.

Like other Web-based tools, there is no installation time and it enables users to build an entire application within minutes. Users can open a browser and quickly generate code via the integrated MPLAB Code Configurator which integrates with MPLAB Xpress: this is a feature which is not available with any other cloud-based IDE. Users can then test that code with the included simulator, compile the code and then programme and debug their target MCU.

The MPLAB Xpress Community allows users to get their project started quickly, solve problems, and inspire others by sharing ideas and knowledge.  The “Examples” section provides easy, searchable access to MCU code developed and validated by Microchip engineers, such as setup, basic functions and advanced projects.  Designers can add to this knowledge base by making any of their stored projects accessible to the rest of the user community.  
Microchip is also looking to build a community around the tools with a dedicated MPLAB Xpress User Forum and Wiki are also available.

How Atmel's ARM-based devices will be integrated into this environment remains to be seen after Microchip's acquisition of the company.

Wednesday, January 20, 2016

Microchip underbids for Atmel and wins

By Nick Flaherty www.flaherty.co.uk

Microchip Technology has booted Dialog Semiconductor out of its deal to buy Atmel with a lower offer but more cash.


Microchip today signed a definitive agreement to acquire Atmel for $8.15 per share in a $3.56bn combination of cash and shares. This compares to the $4.6bn offer from Dialog, although Microchip's cash offer of $7 a share is significantly higher.  
This potentially puts Dialog at risk of being acquired itself. A $137m termination fee will help, but still leaves Dialog vulnerable in this time of manic mergers.  
"Our Board of Directors determined, after consultation with our financial advisor and outside legal counsel, that the transaction with Microchip is a superior proposal for Atmel's stockholders under the terms of our merger agreement with Dialog Semiconductor plc that we terminated today.  Under the Microchip transaction, Atmel stockholders will receive a much higher cash consideration per share compared to the Dialog deal, as well as the opportunity for further upside through the ownership of stock of Microchip," said Steven Laub, President and CEO of Atmel.
Microchip bought Micrel in May last year, and this deal takes out Atmel as a major competitor, consolidating customer business in Microchip as there was more common product lines between the two compared to the Dialog deal (as in the chart on the left). The combination of Atmel and Microchip will have revenue of around $4bn (compared to $3.5bn for the Dialog/Atmel combination), and this will lead to similar estimated cost savings of $170m from April 2018. However, the deal still needs to be approved by Atmel's shareholders, so its not a done deal yet.
"We are delighted to welcome Atmel employees to Microchip and look forward to closing the transaction and working together to realize the benefits of a combined team pursuing a unified strategy.  As the semiconductor industry consolidates, Microchip continues to execute a highly successful consolidation strategy with a string of acquisitions that have helped to double our revenue growth rate compared to our organic revenue growth rate over the last few years.  The Atmel acquisition is the latest chapter of our growth strategy and will add further operational and customer scale to Microchip," said Steve Sanghi, President and CEO of Microchip. 
The transaction has been approved by the Board of Directors of each company and is expected to close in the second quarter of calendar year 2016, subject to approval by Atmel's stockholders, regulatory approvals and other customary closing conditions.