All the latest quantum computer articles

See the latest stories on quantum computing from eeNews Europe

Friday, March 05, 2010

NanoKTN and Institute of Nanotechnology Launch International NanoMicroClub to Encourage Global Investment in UK SMEs

INMC to Offer UK SMEs Opportunities to Network at Key International Events

The Nanotechnology Knowledge Transfer Network (NanoKTN), one of the UK’s primary knowledge-based networks for Micro and Nanotechnologies, and the Institute of Nanotechnology (IoN), a professional membership organisation for the nanotechnology industry, has announced a collaboration to encourage and support global business development for UK SMEs.
The partnership will see the launch of the International NanoMicroClub (INMC) and the opportunity for selected SMEs to host workshops at three major international events, offering vital networking opportunities.
If the future of UK nanotechnology is going to be securely embedded in the global market, we need to ensure UK SMEs are including international business development and collaboration in the marketing mix. However, with international marketing costing around 14 times the equivalent domestic marketing budget, it limits the international interaction that a UK SME can undertake. International business development therefore poses a significant barrier to SMEs, which this project seeks to address. 
The INMC was created through a partnership between the NanoKTN and IoN and builds on the IoN’s existing NanoMicroClub. The club aims to provide a platform for UK micro and nanotechnology companies to network and engage internationally with global markets, previously inaccessible due to a lack of funding. The club will be taking UK based companies developing nanotechnologies to three well known and highly regarded international events and highlighting them to an international audience through specific and pre arranged networking and brokerage sessions.
Building on networks developed within the NanoKTN and IoN, the INMC partnering workshops will comprise short presentations from UK delegates, followed by facilitated one-on-one meetings between company principals.
“The INMC aims to help SME’s project themselves into important export markets through research, collaboration and business development. Commercial outcomes from international deals may take time but this only reinforces the need to provide support to SMEs for international business development,” said Alec Reader, Director of the NanoKTN. “This sort of framework of support in the early stages can make the difference between success and failure and is crucially important to the UK nanotechnology market.”
The three events that are planned cover the three major trading areas, USA, Europe and Japan. Each event will have a particular theme specific to the trading strength of each area. The first event in the USA will be at the NSTI conference in Anahiem, CA and will be themed around the bio-nanotechnology area. Further events in Europe and Japan are planned in the last quarter of 2010 and first quarter of 2011 respectively. Further details of these events will be available in due course.
“The NanoMicroClub has been assisting UK nanotechnology companies for over five years as it has provided a networking platform to assist companies in accessing new customers and routes to market. Our new partnership with the NanoKTN will allow us to really go global and strengthen our successful formula” said Del Stark, Business Development Manager of the Institute of Nanotechnology.  

Reblog this post [with Zemanta]

Thursday, March 04, 2010

World’s smallest MEMS microphones with a digital interface

MEMS for MP3 and mobile phones

TDK-EPC has developed the smallest commercially available MEMS microphone worldwide with an integrated digital interface. The dimensions of the EPCOS T4030 of 3.25 × 2.25 × 1.1 mm make the microphone about 60 percent smaller than alternative products. This allows significantly more compact designs of mobile phones and consumer electronics applications such as MP3 players and digital cameras.
 The T4030 has a sensitivity of -26 dB FS (full scale), and a signal-to-noise ratio of 60 dBA. Even at a sound level of 100 dB, the distortion factor is under 1 percent. Its frequency response is characterized by high bandwidth and low amplitude fluctuations. The T4030 is largely insensitive to electromagnetic interference thanks to a digital PDM (pulse density modulation) output. The suppression of the power supply noise is -82 dB FS. Two channels can also be transmitted via one signal line, making stereo applications much simpler to implement than in analog technology. The supply voltage range is between 1.64 and 2.86 V. The power consumption is 650 µA and is reduced to less than 10 µA in standby operation.
The compact dimensions and electrical properties are also suited to high audio quality applications such as video and VoIP (Voice over IP) systems, telephone conference installations, beam-forming and noise-suppression systems.

The T4030 is manufactured in the CSMP (chip-sized MEMS package) technology, which was developed for SAW filters and has already proved itself in billions of mobile phones. It thus benefits from matured EPCOS production processes as well as more than 15 years experience in the development of MEMS microphones. TDK-EPC also uses the proven technology of SAW production for the final electro-acoustic measurement. The MEMS microphones are RoHS-compatible and suitable for lead-free SMD reflow solder processes.

Main features
  • Compact dimensions: 3.25 × 2.25 × 1.1 mm³
  • Low distortion: less than 1 percent at 100 dB
  • Good signal-to-noise ratio: 60 dBA
Reblog this post [with Zemanta]

Wednesday, March 03, 2010

Kontron brings 10 Gigabit Ethernet Switching to CompactPCI and VME


CP6930 supports PICMG 2.x and VITA 31.1 compliant high-performance switching

The new Kontron CP6930 6U switch brings 10 Gigabit Ethernet switching to CompactPCI and VME embedded systems and communication networks. With six SFP+ interfaces for 10Gb, two SFP interfaces for 1Gb Ethernet switching on the front and 24 GbE ports on the back, the new switch boosts the performance of VME and CompactPCI systems based on the latest processor boards for intra- and intercommunication. The non-blocking, fully managed L2/L3 switch allows system designers to stay ahead of the rising transaction and traffic loads in many embedded system designs and communication networks therefore maximizing the usage and longevity of their systems and reducing the TCO for customers' solutions.

The 6U switch fits into both CompactPCI and VME (via the VITA 31.1 specification*) system chassis and offers unmatched price-to-performance ratio by implementing the highly integrated Broadcom single-chip switching solution. The CP6930 also offers an AMCC PowerPC for individually configurable application control and a Microcontroller for IPMI-based platform management. With the fully managed software environment and a comprehensive firmware package, the unit is customizable based on the individual requirements of the installation. This enables the switch to consolidate even the most complex data flow architectures into one system and simplifies the development of application-ready high-quality platforms so that system engineers can reduce time-to-market by focusing their development efforts on the customer's application. Vertical markets for serial-switched CompactPCI and VME hardware environments include storage networks (NAS, SAN), telecommunication networks (IPTV, VoIP, Mobile), wireless radio network controllers (Tetra) and high-speed servers for aerospace and military applications. High-end medical and automation platforms also benefit from a bottleneck-free 10 Gb environment.

Feature set 

The CP6930 hot-swappable CPCI switch serves 24 GbE ports to the backplane or rear transition modules and six high capacity SFP+ 10GbE links at the front for high speed inter- and intra-connects plus 2 SFP 1 Gb ports. Utilizing these interfaces not only enables systems to cascade, but also enables the latest processor boards to be interconnected inside the system with highest bandwidth.
It supports all relevant standards, L2 and L3 switching, VLANs and QoS as well as routing capabilities. It provides a fully-managed software environment and comprehensive firmware package with seamless integration into the shelf and its shelf management by IPMI V1.5. It also supports hot swap capabilities and reliable field upgrades for all software components and contains dual boot images with rollback capabilities during upgrades. The system may be managed via SNMP with standard MIBs and command line interfaces over Telnet, SSH or serial lines.
The new high-speed switch complies with PICMG 2.0 R3.0 specifications, PICMG 2.1 R.2.0 hot swap specifications, PICMG 2.9 R2.0 system management, PICMG 2.16 R1.0 and VME64x VITA 31.1 packet switching backplane, IPMI specification V1.5, and ANSI/Vita 47-2005 and supports Ethernet and bridging protocols such as flow control (IEEE 802.3x), spanning tree (IEEE IEE 802.1D, 802.1W), and link aggregation (IEEE 802.3ad). The Ethernet implementation also supports QoS (IEEE 802.1p, ACL and DiffServ) on all ports, as well as VLAN, including VLAN registration with GARP/GVRP (IEEE 802.1q).
The routing capabilities include OSPF, RIP and VRRP support as well as Multicast routing using PIM-SM, PIM-DM and IGMP. The CP6930 supports reliable, redundant operation with support for dual-star fabrics for both switching and routing functions. The services include onboard event management, test and trace facilities, power on the shelf diagnostics, and the persistent storage of configuration across restarts. It also supports the retrieving and installing of multiple configurations.

Reblog this post [with Zemanta]

STMicroelectronics Launches 32bit Cortex-M3 line under $1

Optimized features for price-sensitive consumer, appliance and industrial designs from 85c

Taking the different approach from packing features into a device, STMicroelectronics has launched a 'value line' low cost version of its STM32 microcontroller.
Until now, engineers upgrading legacy 16-bit designs for higher performance and flexibility have had to choose from high-end alternatives that are featured for more complex applications. ST’s new STM32 Value Line remedies this by combining a 24MHz ARM Cortex-M3 processor core with peripheral features optimized for typical 16-bit applications such as home-entertainment products, appliances, and industrial equipment. At 24MHz with zero wait state embedded Flash memory access, the STM32 Value Line delivers up to 30 DMIPS, outperforming most of the 16-bit processors. The added advantage of its industry-standard processor, available in devices priced under $1, provides access to a large base of development knowledge and tools.
 Application-focused features embedded in the STM32 Value Line include up to 12 16-bit timers, including a PWM timer for motor-control applications. As many as 26 timer channels are available, with package options providing up to 100 pins, as well as a 12-bit high-speed Analog-to-Digital Converter (ADC), to solve a wide range of industrial control challenges. ST is also offering free software support, including a complete 3-phase motor-control library for appliance and motor-control applications and free VDE-certified libraries to help household appliances achieve necessary approval to EN/IEC60335-1 Class B.
The family also embeds hardware support for the Consumer Electronics Control (CEC) protocol included in the HDMI standard, thereby simplifying CEC implementation in products such as TVs, Blu-ray players, PVRs and home cinema equipment. CEC allows up to 10 HDMI devices to discover each other and communicate to manage user-convenience features such as one-touch control of multiple devices via a single remote. Implementing CEC in hardware also frees the processor core to perform extra high-level functions, thereby adding further value to developers’ applications.
In addition, a 12-bit Digital-to-Analogue Converter (DAC) allows developers to add audio support in a variety of applications such as security devices or home automation systems, and to address wider opportunities requiring analogue waveform generation and control.
The STM32 Value Line links developers into ST’s extensive STM32 family, which now contain five product lines presenting a choice of cost-sensitive, power-sensitive, connectivity-oriented or high-performance microcontrollers. In all, over 110 devices are available, offering a range of features and on-chip memory densities while maintaining pin and software compatibility across all devices. This commonality simplifies strategic processor platform selection by enabling convenient scaling and upgrading of designs, and allowing re-use of intellectual property and development tools to minimize cost and time to market for new products.
The STM32 Value Line microcontrollers are now sampling to lead customers. Volume production will begin from March 2010, at prices from $0.85 for 16Kbyte devices in 48-pin LQFP48 package and $1.44 for 64Kbyte devices in the 64-pin LQFP64 package, for quantities of 10,000 units.

Reblog this post [with Zemanta]

Tuesday, March 02, 2010

VIA launches ruggedized Em-ITX embedded PC

New format fanless and ruggedized embedded box PC for industrial, kiosk, POI and signage applications

VIA Technologies has developed a complete, fanless and ruggedized embedded box system based on the unique I/O-rich Em-ITX form factor, offering the ideal solution for a variety of industrial applications.
Available as a complete system including drives and memory, the fanless VIA ART-3000 combines a number of unique features including diskless booting, excellent vibration and shock resistance, dual Gigabit networking and dual LVDS video support. Ruthlessly low power consumption means the VIA ART-3000 can also support fanless configurations with no moving parts making it ideal for ultra stable, mission critical implementations.
 “The VIA ART series really underlines our strength in offering system level products that exceed expectations,” said Daniel Wu, Vice President, VIA Embedded Platform Division at VIA Technologies. “Customers can now take advantage of a complete fanless, ruggedized system that offers incredible flexibility, a wide feature set, and excellent stability straight out of the box.”
The VIA ART-3000 is built around the VIA EITX-3000 board, the first board based on the Em-ITX form factor standard. The VIA EITX-3000 is powered by a 1.3GHz VIA Nano processor and the VIA VX800 media system processor, supporting up to 2GB of DDR2 system memory, integrated VIA Chrome 9 graphics core and the VIA Chromotion video engine for hardware acceleration for the latest HD video codecs.
The VIA ART-3000 supports up to three displays and two independent video content streams, across dual LVDS and VGA ports. Networking is through dual Gigabit ports, with an array COM and USB ports providing a wealth of device and peripheral connectivity. The VIA ART-3000 supports wall, table, reverse and VESA mounting options and can withstand temperatures of -20oC - 60oC, vibrations of up to 5Gs and shock resistance up to 20Gs in compact flash storage configurations.
VIA EITX-3000
The VIA EITX-3000 is based on the Em-ITX specification and is suitable for a range of ultra-thin embedded applications. The powerful VIA Nano processor and VIA VX800 media system processor are placed on the reverse of the board, allowing greater space saving for passive cooling and entirely fanless embedded designs. A wide variety of I/O options are provided along dual I/O coastlines and include dual LVDS ports, a VGA port, dual Gigabit Ethernet ports, 6 USB 2.0 ports and four COM ports.


Reblog this post [with Zemanta]

Silicon Labs drives SmartGrid with Low Power Wireless Microcontrollers

Single-Chip for Smart Meter Solutions with RF Connectivity

Silicon Laboratories has launched the industry’s lowest power single-chip wireless microcontrollers (MCUs) for battery-operated home automation systems, smart meters, in-home utility monitors and security systems.
The demand for smart energy technology continues to grow each year as government initiatives mandate upgrades to the grid, as well as adding intelligence to meters that measure water, gas and heat. The market for smart home products, such as lighting and HVAC controls, in-home utility monitors and home security systems, is also on the rise, driven in part by the desire to conserve energy and by the expansion of home automation services and standards-based wireless technologies.
Today’s smart home/smart grid applications merge wired/wireless connectivity and embedded control with power-efficient design to maximize battery life. The ultra-low-power Si10xx wireless MCU family is aimed at these battery-operated systems with RF links, as well as for many other embedded wireless applications that require ultra-low power consumption.
The Si10xx wireless MCUs combine a 25 MHz 8051 core, EZRadioPRO sub-GHz RF transceiver, up to 64 kB of flash and up to 12-bit ADC – all in a compact 5 mm x 7 mm package. The Si10xx family is the industry’s most power-efficient single-chip wireless MCU solution, providing the lowest current in common modes of operation. The wireless MCUs offer the lowest active-mode current consumption (160 microamps per MHz). In sleep mode, they consume only 615 nanoamps with an active 32.768 kHz real-time clock (RTC) and down to 315 nanoamps with an active RTC and a low frequency oscillator (LFO). In deep-sleep mode, they can operate on as little as 25 nA with full RAM retention.
The Si10xx family’s ultra-low-power architecture and fast wake-up time (2 microseconds) greatly extends battery life in both lithium and alkaline battery applications. The Si10xx architecture also features a dc-dc boost converter designed to supply large loads with extremely high efficiency. The dc-dc converter supplies power needed for periods of RF transmission and reception with efficiencies of up to 90 percent. As a result, developers can design embedded wireless systems capable of 25 percent longer battery life over alternative solutions with no degradation in MCU or radio performance; in some system configurations, an Si10xx device can extend battery life by as much as 50 percent.
The Si10xx wireless MCUs offer leading RF performance with the highest output power and sensitivity and lowest power wake-up transition. The Si10xx family’s integrated power amplifier (PA) and low-noise amplifier enable an RF link budget of greater than 140 dB without requiring active external elements. This results in extended range, higher bandwidth and lower overall power consumption.
“The Si10xx family is a battery’s best friend, offering best-in-class energy efficiency that makes it easier to design battery-powered products for the smart home and smart meter markets,” said Mark Thompson, vice president and general manager of Silicon Labs’ Embedded Mixed Signal products. “By incorporating the EZRadioPRO transceiver, the Si10xx wireless MCUs deliver exceptional RF performance with high output power and superior sensitivity.”
Development Support
To streamline the development of smart home and smart meter products based on Si10xx wireless MCUs, Silicon Labs offers hardware and software tools for MCU and system design, RF design and optimization, and network software design. These tools include the following:

  • Si1000-DK and Si1010-DK development kits
  • SDBC-DK3 development platform for EZRadioPRO wireless products
  • Wireless development suite (WDS), a comprehensive toolset that makes it easy to develop robust, low-cost wireless applications with little or no specific RF design experience
  • EZMACPRO media access control module (“network in a box”)
  • Fully compliant wireless M-Bus stack (EN: 13757-4), a metering networking standard common in Europe
Pricing and Availability
Pricing for the Si10xx MCUs starts at $3.51 (USD) in 10K quantities. The Si1000DK development kit is available now for $99 (USD). The WIRELESSMBUSEK evaluation kit is priced at $99 (USD). For additional product information and to purchase samples and development tools, please visit www.silabs.com/pr/wirelessmcu.

Reblog this post [with Zemanta]

Renesas launches industry’s fastest embedded flash microcontroller


SH7216 series with 200MHz superscalar core and CAN, USB and Ethernet connectivity for motor control and networked applications

Renesas Technology Europe has launched the SH7216 series of 32-bit on-chip flash memory microcontrollers for industrial applications such as AC servos, factory automation equipment, building automation, air conditioning, and general purpose networking. The SH7216 group consists of 72 devices offering variations in on-chip memory capacity, package type, and whether or not FPU (floating point processing unit) and/or Ethernet functions are included. The device features 200 MHz operating frequency, making it the industry’s fastest embedded flash microcontroller.  It also includes an extensive set of built-in peripherals and communication interfaces.

Improved real-time control performance
The SH7216 is powered by a 32-bit SH-2A superscalar core. Selected devices also include 400MFLOPS single and double precision floating point unit. Due to the superscalar core which executes two instructions simultaneously, the device can achieve up to 400DMIPS.
The SuperH family has already achieved several industry records. First, it has the best MIPS to mm3 ratio, making it the fastest MCU in the smallest package. Second, its 3.75MB flash microcontroller is currently the largest embedded flash device available. Third, the new SH7216 offers the fastest performance on the market at 200MHz.
The device includes MONOS (Metal Oxide Nitride Oxide Silicon) embedded Flash that enables fully deterministic zero-wait operation with 10ns access time.  The CPU clock runs at 200MHz and is not delayed by flash access, resulting in excellent performance with no wait states or cache misses.

Improved system reaction with fast IRQ response time
The core’s CPU registers are now arranged in “banks”, with the 16 registers being mirrored 15 times. Using this technique, a subroutine can use a second set of registers leaving the current ones ready for use upon return from the subroutine. This means that the registers do not need to be popped onto and back from the stack, providing a quicker return from the subroutine. As a result, the response time to an interrupt request (IRQ) is as quick as a simple branch instruction.  At 200MHz this would be 30ns. For inverters and real time control systems, the combination of a fast core and low reaction time means that the SH7216 provides a level of performance and precision that could previously only be achieved by using ASIC or a dedicated /DSP coprocessor. 

Extensive set of peripheral and communication functions
In addition to the typical serial communication functions, this microcontroller family also features a diverse set of interfaces, including Ethernet, CAN, and USB 2.0.  These features eliminate the need for external communication controllers in applications such as office automation equipment, and various other types of industrial communication applications.   They also give the SH7216 a broader appeal for general purpose connectivity applications.  

Optimised for industrial equipment
The SH7216 also includes two advanced motor control timer units (MTU2 and MTU2S) that can control two motors simultaneously and enable multi-axis servo control with high precision. They also include two 12-bit A/D converters that can perform conversions in as little as 1 µs. This combination of timer and A/D converter makes the SH7216 suitable for controlling BLAC / BLDC motors using the most advanced control techniques.
In addition, this microcontroller provides a wide range of other peripheral functions, including data flash for non-volatile data storage and data transfer controller and DMAC to reduce the CPU load. The data flash memory incorporates background operation (BGO) functionality that enables data to be written at the same time a program is executing. This means that the CPU is not slowed down by this process, making it ideal for backup and saving the cost of an external EEPROM.

The SH7216 family
The SH7216 group adopts the SH2A-FPU, which adds an FPU function into the SH-2A CPU core, and can perform double precision floating point operations at speeds up to ten times faster than previous products. This new family also provides up to 1 MB of high-speed flash memory to store the increasingly large programs associated with the higher functionality required. This new group also provides up to 128 KB of on-chip RAM, eliminating the need for external SRAM or SDRAM. This can contribute to miniaturisation and lower costs in application systems.
In these applications, high-speed communication functions have become indispensable along with the increasing performance. As industrial equipment must now support multiple high-speed communication protocols, earlier communication interfaces have now become insufficient, in terms of both functionality and communication bandwidth. While Renesas provides a product line of high-speed communication interfaces, such as Ethernet and USB, as products for use in ASSP devices, in the SH7216, these interfaces are integrated on the same chip. These microcontrollers also include a CAN controller to enable a wide range of industrial communication protocols. The Ethernet interface includes a media access controller (MAC) that conforms to the IEEE 802.3 standard, and can connect to a 10 or 100Mbps Ethernet.
These devices are available in 176-pin LQFP (24 × 24 mm), 176-pin LQFP (20 × 20 mm), and 176-pin BGA (13 × 13 mm) packages.
Reblog this post [with Zemanta]

New Freescale Processor Helps Lower Costs and Foster Innovation for Next-Generation eReaders | Business Wire

New Freescale Processor Helps Lower Costs and Foster Innovation for Next-Generation eReaders | Business Wire

Posted using ShareThis

Monday, March 01, 2010

Silicon Basis heads for FPGA test chip (UK Technology Startups)

Bristol startup Silicon Basis is developing a test chip for its innovative FPGA architecture that has potential to reduce the size, cost and power of a reconfigurable array to a quarter of today's devices.

The Soft Gate Array (SGA) uses a time factor to reuse each look up table in the array and the interconnect up to eight times a cycle, dramatically reducing the size of the array and so reducing the cost to well under 25% of current FPGAs.

Silicon Basis heads for FPGA test chip (UK Technology Startups)
Reblog this post [with Zemanta]

Tabula Introduces Spacetime Programmable Logic Architecture

3D Architecture Enables New Category of Programmable Logic Devices 

Santa Clara startup Tabula has introduced a groundbreaking programmable logic architecture that uses time as a third dimension to deliver unmatched capability and affordability. Tabula achieves this breakthrough by combining the Spacetime hardware that dynamically reconfigures logic, memory, and interconnect at multi-GHz rates with the Spacetime compiler that manages this ultra-rapid reconfiguration transparently. Tabula will use Spacetime to deliver 3-D devices that have significant density advantages and dramatically shorter interconnects when compared to FPGAs that use 2-D architectures. In addition, Tabula will deliver these benefits while preserving a traditional design methodology. As a result, Spacetime will enable a new class of programmable devices that combines the capability of an ASIC with the ease of use of an FPGA at price points suitable for volume production.
“The key to Spacetime and its many advantages is resolving the interconnect problem intrinsic to FPGAs,” said Steve Teig, Tabula’s President and CTO. “Almost 90% of the core area of FPGAs is devoted to the implementation and control of interconnect. Besides driving up die size and product cost, the long connections also limit performance and make timing closure more difficult. If you’re going to achieve a breakthrough in programmable capability and affordability, you have to make the interconnect more efficient, and that’s what Spacetime does.”
Tabula was founded by EDA pioneer Steve Teig and is led by Dennis Segers, former CEO of Matrix Semiconductor and former Senior Vice President and member of the board of directors at Xilinx. With support from premier venture capitalists including Greylock Partners, Benchmark Capital, New Enterprise Associates, Crosslink Capital, Balderton Capital, DAG Ventures, and Integral Capital, Tabula has over 80 patents granted around the Spacetime architecture with over 70 more pending. Tabula is developing a family of general-purpose 3PLD devices that are based on the Spacetime architecture. Tabula will initially target the programmable logic market but will also extend the benefits of programmability into markets that FPGAs cannot serve cost-effectively.
“The programmable logic market is one of the most profitable segments of the semiconductor industry,” said Dennis Segers, CEO of Tabula. “It was once one of the fastest growing as well, driven by rapid advancements in FPGA capability alongside Moore’s Law. Since 2000, however, there has been only incremental improvement in FPGA architectures and circuits from the market leaders, leaving programmable logic customers underserved and limiting growth for the industry segment. With the Spacetime architecture, Tabula will bring unprecedented value into the programmable logic space, restoring innovation into this formerly vibrant market and accelerating its growth.”
Spacetime Architecture Overview
A Spacetime device reconfigures on the fly at multi-GHz rates, executing each portion of a design in an automatically defined sequence of steps. Although manufactured using a standard CMOS process, Spacetime uses this ultra-rapid reconfiguration to make Time a third dimension, resulting in a 3-D device with multiple layers or folds in which computation and signal transmission can occur. Each fold performs a portion of the desired function and stores the result in place. When some or all of a fold is reconfigured, it uses the locally stored data to perform the next portion of the function. By rapidly reconfiguring to execute different portions of each function, a 3-D Spacetime device can implement a complex design using only a small fraction of the resources that would be required by an inherently 2-D FPGA. A designer can realize all of the benefits of 3-D within a familiar methodology using the Spacetime compiler that automatically maps standard RTL into Spacetime.
Reblog this post [with Zemanta]

T-Ray teams with the University of Leeds on terahertz research

T-Ray Science in  an emerging leader in TeraHertz research in Canada, is teaming up with the University of Leeds to develop low cost, pulsed and continuous wave ("CW"), fibre coupled terahertz (THz) spectrometers that operate at telecoms wavelengths. Professor Edmund Linfield (Chair in Terahertz Electronics, Director of the Institute of Microwaves and Photonics) will lead the project in the School of Electronic and Electrical Engineering, with Dr. John Cunningham (Reader in High Frequency Electronics and Terahertz Photonics), and Professor Giles Davies (Chair of Electronic and Photonic Engineering). The commercial advantage to developing a spectrometer at the telecom wavelength is the ability to use mass produced telecom components such as lasers, fibres and couplers which could reduce the cost of a system by 90% compared to THz systems currently available.
"The collaboration with the University of Leeds could lead to low cost, compact and easy to use THz diagnostic and imaging systems for applications in medical imaging, explosives detection, airport security, and manufacturing quality control," said Thomas Braun, President and CEO of T-Ray Science. "We are honoured to have the opportunity to work with a world class university in developing this cutting edge technology. T-Ray is a natural industrial partner for the University of Leeds as we hold the exclusive license from MIT (the Massachusetts Institute of Technology) for the CW coherent detection system. Our collaboration with the University of Leeds compliments our other collaborations with the University of Victoria, the University of Sherbrooke and the University of Manitoba, all aimed at lowering the cost and increasing the power of existing THz diagnostic and imaging systems."
The University of Leeds received a grant from the Engineering and Physical Sciences Research Council of the United Kingdom to fund a project to develop a low cost, pulsed and continuous wave ("CW"), fibre coupled terahertz (THz) spectrometer which operates at telecoms wavelengths. T-Ray supported the grant application and will assist in the project through laboratory tests of the newly developed system. The Company will also have the opportunity to license any Intellectual Property that may result from the project.
T-Ray owns the exclusive license from the Massachusetts Institute of Technology for the only known CW coherent detection system which was invented by Drs. Simon Verghese and Alex McIntosh. The CW system being developed by Leeds will produce continuous THz waves at a fixed frequency for a very low cost and will be more compact and robust because of the use of mass produced diode lasers, rather than the large and expensive Ti:Sapphire lasers traditionally used by THz researchers.
Reblog this post [with Zemanta]

Tsmc 40nm yield issues explained

TSMC HAS FINALLY come to terms with its 40nm ordeal. In a transcript published by EETimes, Shang-Yi Chiang, TSMC’s R&D boss, laid out six bullet points to explain the situation the company is coming from, what steps it’s taking to make amends and where it's going.

Tsmc 40nm yield issues explained - The Inquirer

Posted using ShareThis

Electronics for a third-generation artificial retina

Scientists and engineers at Lawrence Livermore National Laboratory are now developing the electronics for a third-generation artificial retina as part of the U.S. Department of Energy (DOE) project to produce an “epiretinal prosthesis” that could restore vision to millions of people around the world suffering from eye diseases.

Story here
Reblog this post [with Zemanta]

Global 3-D TV Shipments Set to Soar to 78 Million Units in 2015

Boom with 80% CAGR, but concerns remain over 3D glasses

Global 3-D television shipments will soar to 78 million units by 2015, rising at a Compound Annual Growth Rate (CAGR) of 80 percent from 4.2 million in 2010, iSuppli predicts. Revenue from shipments of these sets will boom to $64.3bn in 2015, up by nearly a factor of nine from $7.4bn in 2010.
Figure 1 attached presents iSuppli’s worldwide forecast of 3-D TV unit shipments and revenue for the period of 2010 to 2015.
“While 3-D television has been all the rage in the consumer electronics industry, the market so far has been more talk than action,” said Riddhi Patel, director of television system research at iSuppli. “However, announcements made before and after the 2010 Consumer Electronics Show (CES) in January indicate that 3-D TV is becoming a reality. At the event, top television brands including Sony, LG, Panasonic and Samsung showcased upcoming offerings of full-featured 3-D TVs in the home. Furthermore, consumer electronics makers at CES announced 3-D Blu-ray players and home theater systems, providing critical support that will help 3-D to move beyond a niche market and enter the mainstream in the coming years.”
Because of this strong brand commitment, competition in the 3-D market is expected to be intense, causing prices to plunge. The global Average Selling Price (ASP) for 3-D TVs is set to drop to $825 by 2015, less than half the $1,768 ASP in 2010. This will make 3-D TVs attractive to worldwide consumers.
iSuppli’s forecast assumes that brands will roll out their initial 3-D televisions starting in the first quarter and continue through the second half of the year. Many of the initial 3-D TV sets, designed to test the waters of the market and gauge consumer interest, will command a price premium of $600 to $700 compared to 2D LCD-TVs using Light Emitting Diode (LED) backlighting.
iSuppli predicts that early adopters alone will purchase 3-D TVs in 2010 and 2011. However, by 2012 and beyond, sales will spread to a wider audience as content availability increases and prices drop—factors that will enable 3-D TVs to appeal to a wider audience.
Content is starting to become available this year from ESPN, DirecTV, BSkyB, SkyLife and other broadcasters and providers. ESPN, for example, will be broadcasting 85 games in 3-D this year. Moreover 40 to 50 gaming titles in 3-D are expected to be issued in 2010. 

Concern over glasses

One concern for the television industry is that special glasses are required for consumers to actually see 3-D images. These glasses raise a number of questions. Will eyewear be compatible with other sets, either from the same or from different brands? Do consumers want to wear the glasses for extended periods—or will extended wearing be uncomfortable? And beyond the price of the 3-D set, how much will the glasses cost? Some quarters surmise that the glasses could be as much as $300 a pair—which would prove prohibitive for an average family to afford.
One way that some OEMs are working around this issue is by including two pairs of glasses with their 3-D sets. These bundles would then take away the price of the glasses and give consumers the capability to view 3-D immediately.
Reblog this post [with Zemanta]

Pace becomes world's second largest set top box supplier...

Deighted to see Pace moving into second place in the league table of leading set-top box suppliers, according to Screen Digest. The Yorkshire comnpany has overtaken Technicolor, formerly the Thomson set-top division, to be behind Motorola. The figures were published ahead of Pace’s annual results on Tuesday.
“Growth across the overall set-top box market for pay TV has been driven by two factors: higher volume in emerging markets; and a tendency toward more complex product," said Screen Digest technology analyst Tom Morrod. “Positioning with key operators in growth regions and a strong portfolio of HD and PVR devices are both key to success in the future market. In a large part we see traditional vendors leveraging this kind of expertise to reduce the fragmentation of the set-top box industry and expand market share.”
This comes after the purchase of Phillips’ Set-Top Boxes and Connectivity Solutions businesses in December 2007, adding contracts from the Canal+ Group and BT Vision.

... as it acquires French IP box supplier

French IPTV leaders add enhanced gateway capability to Pace’s converged digital TV offering

Pace France has signed a conditional agreement to acquire Bewan Systems SA, the Paris-based IP and cable gateways specialist. The consideration for the acquisition, part of which is subject to achievement of earn out targets, will be payable in cash and will not exceed €12.5 million. The transaction is expected to be completed during the second quarter of 2010.
Bewan’s residential gateway capabilities – including expertise in xDSL and cable DOCSIS 3.0 IP connectivity technologies - will combine with Pace’s existing gateway business, enabling Pace to offer converged gateway and digital TV solutions to payTV customers. Additionally, the strong relationships Bewan has with several customers in Europe, North Africa and the Middle East will further widen Pace’s growing global presence.
Neil Gaydon, Chief Executive Officer, Pace said; “Pace’s vision is to become a world leader in converged digital TV entertainment. As payTV operators develop converged home entertainment services, advanced residential gateways will become increasingly important - both as standalone devices and integrated into set-top box products that drive whole home networks.
“Bewan will further diversify the Pace Group’s technology and product offering, helping deliver on our convergence vision. Bewan’s management team has built a successful, innovative business; its technologies, intellectual property, excellent products and highly skilled engineering teams, in combination with our business, will further reinforce our IP connectivity capabilities.”
Pace already has an excellent pedigree in IP connectivity; Pace’s hybrid devices include the Le Cube box for French operator, CANAL+ - Europe’s first satellite / IP hybrid set-top box to use the Ethernet port for video-on-demand (VOD) services - and a hybrid HD PVR for Viasat in Scandinavia and the Baltics. Pace has also developed both set-top boxes for the UK’s BT Vision service, including the recently launched Vision+. Pace has demonstrated early leadership in the nascent convergence market – our Home Content Sharing product in the US was the first commercially available platform of its type.
Eric Teissandier, Chief Executive Officer, Bewan, commented; “Pace has built a very successful global business, with an enviable track record of delivering technologically advanced products to many of the world’s payTV operators. Bewan’s know-how will further enable Pace to offer a compelling converged gateway proposition to the market; we’re excited about becoming part of it.”


Reblog this post [with Zemanta]

Thursday, February 18, 2010

iPhones drive NAND Flash Undersupply in 2010

Thanks to its huge sales and high memory usage, Apple’s iPhone is expected to generate insatiable demand for NAND-type flash memory in 2010, helping to strain supplies for the year, according to iSuppli.
“An average of 35.2Gbytes of NAND will be used in each iPhone sold in 2010, iSuppli estimates,” said Michael Yang, senior analyst for memory and storage at iSuppli. “Furthermore, iPhone shipments are set to rise to 33 million in 2010, up 31.5 percent from 25.1 million in 2009. With the iPhone already the largest application for NAND, this huge growth is likely to lead to some periods of undersupply for the year.”
Partly owing to demand driven by the iPhone and competitive products, global NAND flash revenue will rise to $18.1 billion in 2010, up 34 percent from $13.5 billion in 2009, according to a preliminary forecast from iSuppli. This compares to a 14.8 percent increase in 2009.
Partly because of increasing shipments of the iPhone and the arrival of competitive smart-phone products, the number of mobile handsets that contain embedded NAND flash is expected to rise sharply in 2010. iSuppli forecasts that shipments of mobile handsets with embedded NAND flash will grow to 732 million units in 2010, up 13.8 percent from 643 million in 2009. This compares to marginal growth of 1.6 percent in 2008.
“The success of the iPhone in the smart-phone category has spurred the launch of a series of competitive mobile phones,” Yang said. “These include the Motorola Droid, HTC Android Iris, Palm Pre and Google Nexus One. Although these phones may choose a different solution for storage memory, such as a microSD card, they will still aim to match the iPhone spec for spec in terms of memory capacity. This bodes well for NAND flash demand.”
Beyond the smart-phone segment, a number of other promising products are driving the NAND market in 2010, including eBooks and tablet PCs.
However, while eBooks such as the Amazon Kindle may follow a similar growth path as Apple’s iPods, they don’t use nearly as much NAND flash memory. eBooks contain a mere 512MBytes to 2GBytes of embedded NAND included in each device. And although density will no doubt grow in the coming years as wireless Internet enables more features and functionality, NAND usage in eBooks will remain low in 2010, iSuppli predicts.
Tablet PCs—with an anticipated storage density of 32GBytes to 64GBytes of storage—represent an attractive opportunity for NAND suppliers. However, it remains unclear if volumes will reach the projections of hopeful manufacturers. The introduction of Apple’s iPad, though, might boost the market, and if the adoption rate for the iPad that approximates those of the iPod and iPhone could be a serious market-changing segment for NAND vendors.
Reblog this post [with Zemanta]

Wednesday, February 10, 2010

From the creators of the IPAD, the iNEMO

STMicroelectronics Boosts Realism and Accuracy in Gaming, Robotics and Navigation by Combining Multiple Sensors with Microcontrollers 
STMicroelectronics, which owns the trademark for the IPAD, has now launched the iNEMO, a family of multi-sensor Inertial Measurement Unit (IMU) devices combined with micocontrollers.
The integration of a variety of motion, magnetic, pressure and temperature sensors with a 32-bit processing unit and dedicated software in one package will lead to leaps in functionality and performance in a wide variety of applications, including Gaming, Human Machine Interface, Robotics, Portable Navigation Devices and Patient Monitoring.

The very specific iNEMO naming does indicate that ST intends to keep the iPad branding, used recently for Apple's tablet PC, or at least will build a case to extract a signifcant amount of money. 

Members of the iNEMO family of modules offer combinations of 3-axis sensing of linear, angular and magnetic motion with temperature and barometer/altitude readings, representing ST’s first IMUs with 10 degrees of freedom. The modules contain a memory card socket for data logging and dedicated connectors for wired/wireless connectivity, including USB, ZigBee or GPS.
ST’s first iNEMO module (STEVAL-MKI062V1) integrates six different sensors and a 32-bit microcontroller and it is available as a 4.5x5cm evaluation board with a firmware library, a PC Graphical User Interface, and a set of software solutions for different applications.
The most recent iNEMO product (v2) represents a further step in miniaturization and runs a sophisticated sensor fusion algorithm (Attitude Heading Reference System) to provide static and dynamic orientation and inertial measurements.
This iNEMO v2 integrates five ST sensors – a 2-axis roll-and-pitch gyroscope (LPR430AL), a single-axis yaw gyroscope (LY330ALH), a 6-axis geomagnetic module (LSM303DLH), a pressure sensor (LPS001DL) and a temperature sensor (STLM75). All the sensors and the AHRS algorithm are managed by an on-board STM32 microcontroller. The module, which comprises a 4x4cm evaluation board and all the necessary firmware and software, will be available for volume orders in Q2 2010.
“The introduction of iNEMO modules confirms ST’s industry-leading capabilities in providing all the sensors and processing capabilities required by the market. When it comes to sensors, we are the one-stop supplier,” said Benedetto Vigna, Group Vice President and General Manager of the MEMS, Sensors and High Performance Analog Division at ST.
“At the forefront of the MEMS technology development, the iNEMO family roadmap heads toward inertial measurement units delivering ten degrees of freedom in a single package,” added Matteo Lo Presti, General Manager of the Subsystems Product Group. 
Reblog this post [with Zemanta]

TI delivers first quad core radio


WiLink7.0 integrates WLAN, GPS, Bluetooth and FM on true single-chip


Texas Instruments has developed the first truwe single chip to integrate WLAN 802.11n, GPS, FM transmit/receive and Bluetooth technologies. The 65nm WiLink 7.0 solution reduces costs by 30 percent, reduces size by 50 percent and delivers superior coexistence performance as compared to today’s existing solutions. Built on seven generations of proven technologies and legacy software, this single-chip solution further extends TI’s heritage of bringing technologies previously seen in high-end devices to the broad mobile market.
“TI's announcement that its Bluetooth/FM/GPS/WLAN combination IC is sampling to major OEMs marks the first of its kind, demonstrating the strong future for combination ICs that enable device manufacturers to offer multiple radios without sacrificing performance, space requirements or profit margins,” said Lisa Arrowsmith, analyst, IMS Research. “IMS Research forecasts that by 2013, more than 4.5 billion combination ICs featuring a variety of radios will have been shipped.”



WiLink7.0 Video


Features and benefits
Key feature Benefits
Unique coexistence capabilities
  • Hardware mechanisms cancel out board- and chip-level RF interference at the source to simplify design process
  • Enhanced WiFi/Bluetooth/Bluetooth Low Energy inter-core communication prioritizes packet scheduling, supports more connections in parallel
High-performance GPS core
  • Best-in-class 3GPP test performance
  • Multi-path resolution engine coupled with advanced algorithms reduces interference impact for more accurate positioning in urban canyons
  • On-chip position engine simplifies integration with device host processor
  • Supports reduced power consumption during tracking
  • Host-independent location buffering and geo-fencing features further reduce host loading and power consumption
Powerful Bluetooth core
  • Best-in-class RF performance
  • Dedicated audio processor system-on-chip
  • Supports latest Bluetooth low-energy and Bluetooth 3.0 specifications
  • Extensible to support additional protocols
Robust Wi-Fi core
  • Supports the soon-to be ratified WiFi Direct™ and Soft AP mode capabilities, extensible to support additional protocols
  • Supports 802.11 a/b/g/n capabilities
FM core
  • Increased output power for FM transmit combined with highly sensitive FM receive delivers cleaner FM experience
  • Supports internal antenna

“As the first company to put the power of GPS, WLAN, Bluetooth and FM technologies on a single chip, we are excited to have solved some of the market’s most complex coexistence challenges,” said Haviv Ilan, vice president and general manager, wireless connectivity solutions, TI. “This type of innovation builds on our strong heritage in the wireless market and commitment to spearhead next-generation advancements. With its ability to support simultaneous use of all four radios, the WiLink 7.0 solution will truly revolutionize the way people interact with their devices and connect to the larger world.”
The WiLink 7.0 solution is sampling to major OEMs today. Devices using the WiLink 7.0 solution are expected to enter the market by the end of 2010.

Reblog this post [with Zemanta]