All the latest quantum computer articles

See the latest stories on quantum computing from eeNews Europe
Showing posts with label Energy development. Show all posts
Showing posts with label Energy development. Show all posts

Wednesday, September 16, 2009

Low power USB development kit from TI at $49

With a low power digital signal processor, Texas Instruments has managed to develop a development kit in a USB stick which drops the cost of a full-featured emulator and integrated development platform down to $49. This enables rapid creation of DSP applications including portable audio players, voice recorders, IP phones, portable medical devices, biometric USB keys, software defined radios (SDRs), hands-free headsets and metering applications. At this extremely low price point, it is the industry’s lowest cost DSP tool, making development accessible to existing and potential customers, hobbyists, researchers and students.
The TMS320VC5505 eZdsp USB stick development tool simplifies development by providing integrated features such as an on-board XDS100 emulator and on-board audio codec and connectors. Taking advantage of the energy efficient C5505 DSP, the eZdsp requires no other components or cables allowing the entire development tool to be powered by the USB port. Designers simply plug into the USB port of any laptop or workstation for hassle-free development and a simple out-of-the-box experience.
It is based on the C5505 processor, the industry’s lowest power 16-bit DSP with active power consuming less than 0.15 mW/MHz and standby power less than 0.15 mW. An on-board audio codec and connectors allow developers to evaluate many features of the C5505 processor and quickly optimize complex DSP algorithms in terms of performance and power consumption across a variety of design scenarios, and an extension connector allows developers to design and directly connect to daughter cards suitable for their application.
The C5505 eZdsp USB stick development tool is available now $49, which includes a full XDS100 emulator and a target version of the CCStudio v.4 software. Special incentives are available for educators, university students and developers actively participating in TI’s online community.

Reblog this post [with Zemanta]

Sunday, August 02, 2009

Google data on spring cleaning solar panels

Google has been looking at whether it should clean its solar panels, and d'uh, finds that the efficiency rises dramatically when it does! However, there are also some interesting slides on the data they collected.

Ever since we assembled a 1.6 MW solar panel installation at our headquarters in Mountain View in 2007, we've been wondering, "Does cleaning the solar panels make them more effective?" We thought it might, but we needed to be sure. So we analyzed the mountains of data that we collect about the energy that these panels produce — after rain, after cleaning and at different times of the year.

We have two different sets of solar panels on our campus — completely flat ones installed on carports, and rooftop ones that are tilted.

Since the carport solar panels have no tilt, rain doesn't do a good job of rinsing off the dirt they collect. (Also, our carports are situated across from a sand field, which doesn't help the situation.) We cleaned these panels for the first time after they had been in operation for 15 months, and their energy output doubled overnight. When we cleaned them again eight months later, their output instantly increased by 36 percent. In fact, we found that cleaning these panels is the #1 way to maximize the energy they produce. As a result, we've added the carport solar panels to our spring cleaning checklist.

The rooftop solar panels are a different story. Our data indicates that rain does a sufficient job of cleaning the tilted solar panels. Some dirt does accumulate in the corners, but the resulting reduction in energy output is fairly small — and cleaning tilted panels does not significantly increase their energy production. So for now, we'll let Mother Nature take care of cleaning our rooftop panels.

Accumulated dirt in the corners of a rooftop solar panel

We've also been crunching numbers on dollars-and-cents; the more energy our panels produce, the sooner we'll be paid back by our solar investment. Our analysis now predicts that Google's system will pay for itself in about six and a half years, which is even better than we initially expected.

If you want to learn more about our solar study, check out these slides showing the effects that seasonality, tilt, dirt, particulate matter, rain and cleaning have on Google's solar energy output. We hope you solar panel owners out there can tailor our analysis to the specifics of your own installation to produce some extra energy of your own!


Reblog this post [with Zemanta]