All the latest quantum computer articles

See the latest stories on quantum computing from eeNews Europe

Tuesday, January 12, 2010

DS2 streams 1080p HDTV over all wired home networks


DS2 first to show working G.hn prototypes for 3x bandwidth on coax, powerline and phoneline

DS2 in Spain has demonstrated the first live streaming of HDTV using the G.hn draft standard. DS2 also demonstrated its G.hn prototypes support existing UPA technology to ensure backward compatibility with its large installed base of UPA systems.
G.hn is the International Telecommunication Union's (ITU) next generation home networking standard. It defines high-speed home network operation over coax, powerlines, and phonelines by the same silicon. The G.hn standard guarantees interoperability by defining a single DLL/PHY technology for home coax, phoneline, and powerline networks, enabling consumers to connect any device using any wire, anywhere in the home.
The prototype demonstration ran continuously through CES, providing optimised networking over power, coax and phone lines, exchanging data at throughput that far exceeds today's home network technologies over any medium. The demonstration consisted of the prototypes sequentially connected with coax, powerline, and phoneline and a high data rate feed of multiple content streams sent across their links, to both a PC and a HD TV. The HD content streamed was at full 1080P to ensure the G.hn service was being tested with a service that requires top performance, Quality of Service, and bandwidth. The G.hn coax link operated at over three times the best performance possible with today's legacy coax networking technologies. The phoneline performance was over four times that seen with today's technologies. The powerline performance was also over three times what is possible with today’s legacy technologies. And, using the advanced forward error correction and Quality of Service mechanisms of G.hn, the powerline demonstrations were error-free while operating over live power lines subjected continuously to the extreme RF interference generated within the CES itself. Given the type of real world performance demonstrated, a G.hn home network will be able to stream more HD movies anywhere in the home, with even more bandwidth available for other applications than any other home networking technology available.
"Bandwidth requirements in the home network are increasing dramatically due to the way we use and share content and the number of intelligent and energy management devices connected to the home network. At CES 2010, DS2 successfully demonstrated G.hn throughput speeds that support a vast number of simultaneous HD movie streams1. G.hn, with its greater than three times throughput speeds, offers the speed and interoperability to dramatically transform the digital home," said Jorge Blasco, President and CEO of DS2.
DS2 also demonstrated interoperability of its current Universal Powerline Association (UPA) based powerline technology with the G.hn prototypes, confirming that DS2's G.hn chips will provide backwards interoperability with today's installed base of UPA devices. To show the ease of UPA interoperability, after a G.hn powerline link was established between two prototypes, one of the prototypes would be disconnected and replaced with a UPA device from one of the many DS2 UPA partners. The remaining prototype would "auto-sense" the change from G.hn to UPA, quickly establish a link with the UPA device, and achieve a throughput rate the same as achieved by a link between two UPA devices.
"2010 will be the year G.hn captures the market and begins to replace the many disparate technologies that do not interoperate or perform as G.hn does," said Blasco.
DS2 reiterated their announced availability of G.hn-based silicon during Q3 2010, with quantity shipments in Q4.
Reblog this post [with Zemanta]

Intel shows giant holographic touchscreen concept and standard


Intel has demonstrated a new 7-foot-6-inch multi-user, multi-touch 'Intelligent Digital Signage' concept system in New York. Intel said the prototype device could change the way people interact with digital signage technology in environments such as stores, airports, banks and hotels.

The demonstration emulates a virtual brick-and-mortar store setting where customers may use the multi-touch holographic screen to explore merchandise, find out about promotions, submit feedback on products, read customer reviews, view past purchasing histories and share what they have discovered with their friends via social media and mobile phone integration.
Multiple consumers can use this side-by-side window display simultaneously to explore augmented reality-enabled maps of each floor of the store, on which retailers can superimpose images such as coupons and sales promotions next to the product visualizations on the glass, improving the customer's shopping experience.
"As stores seek more competitive advantages over online retailers, digital signage has become a valuable technology for dispersing targeted and interactive content to shoppers," said Joe Jensen, general manager, Intel Embedded Computing Division. "We therefore designed the Intel Intelligent Digital Signage Concept to show that retailers can engage and interact with consumers in a more personal and compelling manner through new usage models such as augmented reality and interactive product explorations, which in turn could yield an increase in revenue and customer loyalty."
More Insight for Advertisers
Intel's digital signage concept also brings a new opportunity for advertisers through the use of anonymous video analytics. As a viewer looks at the system screen, the built-in camera technology analyzes data such as gender and age, audience composition, time-of-day and other criteria, which enable the system to display tailored content and graphics based on estimated demographics. The system anonymously sends audience information to advertisers who can use that information to understand the type of content and messages that are most popular with viewers. This, in turn, helps advertisers target their advertising to maximize the impact on the audience
Traditionally, retail and digital signage application development has been fraught with difficulty as system development requires the use of many different platforms. To address the need for a more streamlined solution, Intel also announced a strategic relationship with Microsoft to develop an open-standards validated platform for digital signage applications.
"With the Windows Embedded and Intel platform, we will provide industries such as the digital signage market with scalable and interoperable solutions that enable applications with rich graphics and interactive capabilities," said Kevin Dallas, general manager, Windows Embedded Business Unit Microsoft. "With this solution, we look forward to delivering endless possibilities to the digital signage industry and beyond."
The media player platform, integrated in Intel's concept, is running on the recently released Intel Core i7 processor with Microsoft Windows Embedded Standard 2011 platform optimized for digital signage applications. The jointly developed platform is expected to be available in the second quarter of 2010.
Reblog this post [with Zemanta]

Monday, January 11, 2010

3D desktop printer line expands

$20,000 for a desktop printer that builds your prototype


This is a slightly off-beat story, but 3D printers that use plastic to build up a 3D structure are an interesting development, particularly with potential in the future to team that with printable and plastic electronics to build a complete system at the desktop. Then the idea of open source hardware becomes very interesting.
At the moment, a year after introducing what has become the world’s best-selling 3D printer — the Dimension uPrint — Stratasys of Minneapolis says it has expanded the product line with the uPrint Plus – an enhanced version with lots of new features – while still keeping the price under $20,000.
Like the Dimension uPrint personal 3D printer, the uPrint Plus has a small footprint for true desktop use, 25 x 26 in (635 x 660 mm). uPrint Plus can print in eight colors of Stratasys ABSplus material, making it easier for designers to differentiate individual assembly components and better depict their product. The printer has a build envelope of 8 x 8 x 6 in (203 x 203 x 152 mm) – 33 percent more volume than the uPrint, enabling larger models. uPrint Plus offers two resolution settings – 0.010 in (0.254 mm) and 0.013 in (0.330 mm) – to give users additional print options.
uPrint Plus also features two support-material enhancements that reduce material consumption and modeling time. The first, Smart Supports, is a software enhancement that reduces material usage by 40 percent, cutting costs. The second, SR-30, is an improved soluble support material that dissolves 69 percent faster, to speed the modeling process. Smart Supports are available for both uPrint and uPrint Plus.
“When the uPrint was introduced one year ago, it quickly became the best-selling 3D printer worldwide, with 1,000 units sold in the first 9 months,” says Dimension Product Manager Mary Stanley. “Based on its success and customer requests for expanded features, the uPrint Plus was created. Now designers, engineers and architects have expanded options for building models based on proven FDM technology.”
uPrint Plus material colors include red, blue, olive, black, dark gray, nectarine, fluorescent yellow, and ivory. The new 3D printer will be available for shipment in March through Stratasys resellers.
According to Wohlers Report 2009, Stratasys supplied 43 percent of all additive fabrication systems installed worldwide in 2008, making it the unit market leader for the seventh consecutive year. Stratasys patented and owns the process known as FDM. This process creates functional prototypes and manufactured goods directly from any 3D CAD program, using high-performance industrial thermoplastics. The company holds more than 250 granted or pending additive fabrication patents globally. Stratasys products are used in the aerospace, defense, automotive, medical, business & industrial equipment, education, architecture, and consumer-product industries.

Reblog this post [with Zemanta]

Xilinx shows Plug-and-Play HDTV FPGA reference design

Low-cost Spartan FPGAs with video enhancement algorithms 
Xilinx has developed a new Video Enhancement Reference Design that bundles advanced digital video algorithms with a low-cost Xilinx Spartan field programmable gate array (FPGA) for rapid 'plug-and-play' design of high-definition digital televisions (HDTVs).
Developed in collaboration with Vestek Electronics Research and Development, a provider of video processing ICs and IP, the demonstration showcases an off-the-shelf, fully functional design that makes it easier for DTV OEMs to differentiate with picture quality rather than on price alone in high-volume markets. It features a configurable digital image engine specifically developed by Vestek to enhance image and video quality of flat panel LCDs and pre-programmed to run on the Spartan FPGA for the optimal mix of cost, power, and performance.

The digital image engine incorporates a suite of production-proven video enhancement algorithms that have been shipping in high volume to the European DTV market. These deliver superior enhancement in color vividness, skin tone, image sharpness, and contrast with each pixel addressed individually instead of universally for the best picture quality and viewer experience. An easy-to-use graphical interface allows designers to adjust parameters and fine-tune picture quality based on the targeted market region. The Spartan FPGA-based solution eliminates the many engineer-hours required to develop and implement similar algorithms in application-specific standard products (ASSPs) or applications-specific integrated circuits (ASICs).

"For OEMs entering the HDTV market, there is a strong need to create offerings that stand out from competitive products on the retail shelf," said Harry Raftopoulos, director of consumer segment marketing at Xilinx. "The Consumer Video Enhancement Reference Design combines production-proven IP and silicon with a turnkey approach, enabling DTV OEMs to easily integrate the Spartan FPGA-based solution directly into their systems and quickly ship high-volume products while offering enhanced picture quality without requiring a dedicated team of video algorithm experts."
Reblog this post [with Zemanta]

Triad launches configurable array with ARM Coretex-M0 core

Low cost embedded analogue and mixed signal platform 
 


Triad Semiconductor has launched the first system-on-chip (SoC) to integrate the 32bit ARM Cortex-M0 processor core with the via-configurable analogue and digital functions needed to rapidly and inexpensively deliver embedded mixed-signal solutions. Through the via-configurable array (VCA) technology, Triad's Mocha-1T array  allows electronic system designers to customize analogue and digital features with lower power consumption and greater system cost savings than last-generation ASIC solutions. The addition of the ARM core allows the ASICs to become a low cost programmable platform.
Embedded processors are everywhere, from toothbrushes to automobiles. The processing requirements for these microprocessors continue to increase along with the need for enhanced, customized analogue and digital features. The  Mocha-1 platform enables integration of complete mixed-signal SoCs by combining the industry-standard Cortex-M0 processor, backed by the ARM development ecosystem, with Triad's VCA technology. Developers are able to integrate entire existing discrete PC board-level designs into the Mocha-1
platform.
Triad's VCA technology combines silicon-proven analogue, digital, memory and  microprocessor resources on a single ASIC die. These resources are overlaid with a global routing fabric. Unique to Triad's approach, all of the resources on a VCA are configured by placing vias within the global routing fabric. Vias are placed on the VCA using Triad's advanced, analogue-aware, via-only automatic place-and-route software, which configures and interconnects the entire VCA without the need for full-custom manual layout, which is an expensive and time consuming problem for ASIC designers. This approach shortens time to prototypes and time to market, reduces development and tooling costs, and accelerates the design process by enabling the reuse of proven mixed-signal IP blocks.

"The Mocha-1 platform is the first and only method to combine ARM processing with configurable analogue and digital," said Jim Kemerling, vice president and CTO of Triad Semiconductor. "It is ideal for any applications that require 32-bit performance in an 8-bit or 16-bit footprint with ultra-low power consumption. Our single-mask VCA technology provides safe, rapid prototyping and production at low cost."
Triad's Mocha-1 integrates a Cortex-M0 32-bit processor running at 25MHz with 32Kbytes of EEPROM memory, 24Kbytes of SRAM, 75,000 gates of user configurable logic, and a wide selection of analog resources including op-amps, DACs, ADCs, resistors, capacitors, transistors and switches.
Combining the Cortex-M0 with these configurable analogue and digital resources allows Mocha-1 to realize a wide range of single-chip, mixed-signal SoC solutions for industrial, medical, sensor, Bluetooth low energy, and military/ aerospace applications.

Pricing and Availability
Price is a function of package and production volume, ranging from US $7.00 to $15.00 per ASIC, with customer-optimized solutions available for under $2.00 in high volume applications. Triad is now accepting customer designs for the Mocha-1 array, with silicon being delivered in Q1.
Reblog this post [with Zemanta]

Saturday, January 09, 2010

Friday, January 08, 2010

Toshiba embeds Cell processsor in terabyte OLED 3D TV

Toshiba America Consumer Products has developed a TV that uses the same Cell Broadband Engine processer as the PlayStation3 and an OLED screen.

The heart of CELL TV is the powerful CELL Engine which has 143 times the processing power available in current TV models.  This massive power manifests itself in incredibly enhanced picture quality that is certainly the new state-of-the-art.  True Super Resolution Technology ensures precise image accuracy by sampling multiple frames and restoring the native pre-sampling signal curve.  This process enhances both SD and HD signals for the clearest possible 1080p Full HD picture. Net Resolution+ adds Compression Noise Canceling to significantly enhance Internet content.  This system detects noise compression inherent in low resolution internet content and separates and corrects the image data to produce sharper, cleaner internet images, even on super large screens.  In addition, AutoView RGB combines an ambient light sensor, and a new RGB sensor, to automatically set the brightness, contrast, gamma, sharpness, color saturation, and now color temperature, to ensure the best possible picture in any lighting condition.  CELL TV also boasts ClearScan 480Hz Frame Rate, for a clear, crisp picture for fast motion video.

SUPER LOCAL DIMMING LED

For the flagship ZX900 Series, Toshiba combined the power of the CELL processor with its new KIRA2 Super Local Dimming LED Display.  KIRA2 is positioned as “Twice as Bright!” as it has an amazing 1,000 cd/m2 brightness.  In addition, KIRA2 also has 512 controllable zones (5X that of previous local dimming models) for precise control over black levels.  This allows the KIRA2 to create an unmatched 9M: 1 Dynamic Contrast, creating the ultimate picture quality package.
CELL TV also has true 3D TV capability, and much more.  For native 3D content, CELL TV uses a Frame Sequential System that changes from 240Hz in 2D mode, to 120Hz for the right eye and 120Hz for the left eye in 3D` mode.  This system accepts multiple 3D input formats, including MPEG4-MVC, RealD, and more.  However, when true 3D content isn’t available, CELL TV has the solution.  TriVector™ 2D to 3D Conversion takes any 2D content and converts it into 3D in real time. This means that with CELL TV you can “Watch Everything in 3D!” including 2D sports, movies, TV shows, video games, and more.  3D TV creates a more immersive home theater experience, and CELL TV’s TriVector 2D to 3D Technology significantly expands the amount of time you can enjoy 3D, truly setting itself apart.

Entertainment server
 
CELL TV is also a high-end Home Entertainment Server with a built-in 1TB HDD, BD Player, and 802.11n Wi-Fi. Content can be downloaded from the Internet, transferred from your PC, or recorded directly onto the HDD from the BD Player. 


The CELL ZX900 Series is the first CELL TV Series, and will be available in large 55” and 65” (diagonal) screen sizes.  This two piece system features a Set-top Box, and a display in the new Genesis Design with a black brushed aluminum bezel with acrylic trim.
 

“Creating a TV around the CELL Engine has removed previous limitations and allowed Toshiba to create an ultra-premium TV that is also an easy to use home entertainment server,” said Scott Ramirez, VP TV Marketing for Toshiba America Consumer Products.  “By combining the CELL Engine with the new KIRA2 LED panel technology, Toshiba engineers have developed all-new levels of stunning performance and comprehensive functionality.  CELL TV provides more brightness, more contrast, more detail, more 3D, more robust connectivity, and more fun than anything we have ever created.”



Reblog this post [with Zemanta]

Analogue test becomes the critical ingredient - 08/01/2010 - Electronics Weekly

Analogue test becomes the critical ingredient - 08/01/2010 - Electronics Weekly

Posted using ShareThis

Thursday, January 07, 2010

Curtiss-Wright Controls Acquires Skyquest Systems in Basildon

Rugged Video Display, Distribution and Recording Technology for Airborne Surveillance Aircraft


Curtiss-Wright Controls in North Carolina has acquired Skyquest Systems, an Essex-based supplier of aircraft video displays, recorders and video/radar converters for surveillance aircraft applications for £10 million, or approximately $16 million. The business will become part of Curtiss-Wright Controls' Embedded Computing group.
"The Skyquest product family complements our Embedded Computing product offering," said David Adams, co-chief operating officer of Curtiss-Wright Corporation. "The addition of Skyquest's airborne video solutions to our product family will expand our systems offering for customers looking for a total solutions provider for their mission critical applications. Furthermore, Curtiss-Wright Controls will be able to grow the Skyquest brand by providing it access to many new markets."  
Skyquest Systems Ltd was formed from two businesses, Skyquest Ltd and Real-Time Vision Ltd. Founded in 1996 and 1998 respectively, the two businesses have been operating under the trademark Skyquest Aviation. They have developed the Skyquest range of stand-alone rugged mission displays, digital video recorders and video distribution systems for aircraft and rotorcraft manufacturers and system integrators throughout the world. Customers for Skyquest's systems typically include police, customs, coast guard, border patrol, military, search & rescue, air ambulance and government agencies.
Skyquest's advanced display and recorder technology and Video Management System (VMS) has been successfully fielded in a broad range of demanding applications including SAR and border patrol operations. In the UK Skyquest's VMS is flown by London's Metropolitan Police Air Support Unit and in Australia, airborne surveillance units deploy the VMS on both fixed and rotary wing aircraft.
The VMS is a fully integrated systems that use touch-screen technology which enables observers and pilots to independently select, view and record the images they need, with no signal loss, from multiple camera and sensors. In addition transmission of video for downlink via microwave link is available. The company is also a market leader in the development of lightweight, airworthy High Definition (HD) video recorders for airborne surveillance.
The company had estimated 2009 sales of approximately $8 million.
Reblog this post [with Zemanta]

Wednesday, January 06, 2010

MIPS demo first Android set top box






MIPS Technologies has launched a series of demonstrations, partnerships and technologies aimed at making the Android mobile phone operating system a viable platform for digital home devices such as set-top boxes, Blu-ray Disc players, DTVs and VoIP solutions. This is a key move as it makes the ecosystem of Android applications already devloped for handsets available for consumer equipment. While some apps are location-based there are many others, particularly games, that can be used to enhance the performance of a system design. Because it was designed for the limited resources of smarphone it is a good match for consumer equipment.


During CES MIPS and partners are demonstrating the world’s first Android-based set-top boxes (STBs), Android running on a MIPS-based netbook, the world’s first social media centre for Android-based embedded platforms, and other key technologies.


 “MIPS is the number one architecture for the digital home, and our optimizations of the Android platform are critical for enabling our customers to deliver the next generation of products for the connected digital home and beyond,” said Art Swift, vice president of marketing for MIPS Technologies. “Together with our partners, we’ve made great progress in optimizing Android for a broad range of consumer devices. We’ve delivered a full HD experience to Android, and now we’re delivering multi-channel audio and enhanced user interfaces required for digital home devices. We anticipate seeing the first Android-based devices in our living rooms in 2010.”




Android-Based Set-top Box, Netbook and Social Media Centre

During CES, Western Mediabridge. and Sigma Designs will demonstrate the STB with video-on-demand, ThinkFree Office (Word, Spreadsheet, Presentation) viewer software, web browser, remote control/keyboard interface and 1080p video quality. "We anticipate there will be a lot of Android-based products and applications in the near future which will be connected to each other. Our belief is that the Android set-top box will be positioned as a main device among in-home Android-based multimedia devices. We will continue to add more applications, making a more feature-rich Android set-top box,” said Ernest Bang, president and CEO of Western Mediabridge.

MIPS will also demonstrate a prototype of an Android-based IPTV set-top box developed by KDDI R&D Labs. Inc., a subsidiary company of Japanese telecommunications carrier KDDI. The set-top box supports IPTV set-top box functionality such as multicasting, video-on-demand (VOD), remote control user interface, and digital rights management (DRM) requirements. The prototype is based on the highly-integrated MIPS-Based SMP8654 media processors from Sigma Designs. Dr. Hiroki Horiuchi, executive director, KDDI R&D Labs. Inc., said, “Android has the potential to be very successful in providing the next-generation internet-connected digital home platform.”

MIPS will also demonstrate the Lemote YeeLoong8089 netbook computer running Android, with browser capability and other applications. According to Lemote, the YeeLoong8089, powered by a MIPS-Based Loongson processor, is the world’s first laptop that contains completely free software.

In addition, MIPS will demonstrate ConnecTV, a new licensable software solution from Toronto-based  Home Jinni, billed as the world’s first social media centre for Android-based embedded platforms. Home Jinni offers residential automation solutions for end-user programming and control of the digital home, including an Android application framework for building UPnP, DLNA and DPWS home area network applications, and an Android framework for integrating the home with IMS and service provider networks. ConnecTV enables consumers to search, discover, categorize and enjoy online media content directly from a TV, and to communicate and share with friends from the comfort of their living room. It also enables control and distribution of media content throughout the home. ConnecTV will be demonstrated on a MIPS-Based platform from Sigma Designs.

According to Home Jinni’s CEO Shidan Gouran, “By embracing Android, MIPS Technologies has sparked a software revolution in consumer electronics which will lead to unprecedented time and cost savings in the product development life cycle. We are a testament to this. What we are showcasing with MIPS at CES is more than the new home entertainment hub; at its core, ConnecTV is a flexible and open application framework that completes Android as the operating system most suitable for the home.”
MIPS recently completed optimizations of Android 2.0 for the MIPS32 architecture. The code is available in open source through the MIPSAndroid community. For more information about the Android platform and MIPS, or to access the full source code for MIPS Technologies’ port of Android 2.0, including a reference binary and documentation.

Reblog this post [with Zemanta]

Tuesday, January 05, 2010

Horizon launches first home fuel cell system


World’s First “Personal Hydrogen Station”
Singapore-based energy company Horizon Fuel Cell Technologies has unveiled a small home hydrogen refueling and storage solution that it says could begin the transition to a hydrogen-based economy.
In addition to making many new fuel cell products possible, the refueling device enables a lower cost, scalable, and consumer-centric hydrogen supply model which eliminates the dependence on large-scale fueling infrastructure investments. Horizon’s innovation can unlock the age-old dilemma over which comes first: clean cars, or clean fuels.
“We no longer need to rely on nationwide networks of hydrogen fueling stations to enable largescale fuel cell commercialization,” said Taras Wankewycz, chief marketing officer and one of the company’s founders. “Horizon is initiating a transition that places consumers in the driving seat. Thanks to our innovation each household can gradually become a major part of tomorrow’s hydrogen fuel supply infrastructure.
Despite the high aims, the system seems practical. A desktop device called Hydrofill simply plugs into the mains power, a solar panel or a small wind turbine, automatically extracts hydrogen from its water tank and stores it in a solid form in small refillable cartridges. The cartridges contain metallic alloys that absorb hydrogen into their crystalline structure, and release it back at low pressures, removing concerns about storing hydrogen at high pressure. This storage method also creates the highest volumetric energy density of any form of hydrogen storage, even higher than liquid hydrogen. Unlike conventional batteries, these cartridges carry more energy capacity, are cheaper, and do not contain any environmentally-harmful heavy metals.
The key issue now is cost and the scalability of the technology for consumer markets. Horizon already makes a hydrogen generator for the laboratory at $848, so the consumer version should be considerably cheaper.
Horizon believes the HYDROFILL is the first step towards private refueling of new generations of fuel cell electric vehicles. Fuel cell technology can greatly improve the features and usability of many battery or engine-powered devices, and create the possibility for lower cost electric cars that drive longer distances and recharge instantly.
Instead of starting with more complex automotive developments, Horizon’s founders decided to start enabling devices that require less power, such as various portable and consumer applications. In 2006 and as a way to start nursing society through the infancy of the hydrogen economy, Horizon introduced solar hydrogen powered toy cars that quickly became the world’s largest volume-produced commercial fuel cell products. Today the company sells its fuel cells through various retail channels in over 60 countries, reduced the cost of fuel cells to marketable levels, and has developed practical ways for all to store and refuel hydrogen.
Horizon’s next phase starts now with the market introduction of a complete line of portable consumer electronic devices that address much larger markets. The first of these products include a micro-fuel cell power supply called MINIPAK, which extends the off-grid runtimes of small electronic devices including cell phones, lighting products, and many USB powered devices.
Horizon will also present an upgraded version of its larger portable off-grid DC power supply system called HYDROPAK. While these and other products will start entering the market in 2010, Horizon is already developing larger-size refueling systems that will enable anything from garden equipment to transportation.
Reblog this post [with Zemanta]

Understanding Windows 7 God mode


This is not a traditional embedded post, but very interesting for anyone running Windows 7. CNN reports the God mode story that by creating a new folder with a certain string of characters you have all, yes all, the system controls in one place. Fantastic! And it works well.
The name for the new folder is GodMode.{ED7BA470-8E54-465E-825C-99712043E01C}



Reblog this post [with Zemanta]

SiBeam launches IP licensing for 60GHz consumer and PC products with WirelessHD

SiBeam Gen 2 Chipsets and IP Licensing for 60GHz WirelessHD at CES
60GHz wireless chip and system developer SiBeam has entered mass production with its second generation chipsets as well as launching an IP licensing program to address increased demand for embedded 60GHz solutions in new market segments within the CE and PC industries.
 SiBEAM already powers wireless high definition consumer electronics products available worldwide from Best Buy, Gefen, LG Electronics, Monster, Panasonic, Samsung and Sony, and has also announced a strategic partnership with Best Buy, the largest consumer electronics outlet in the United States.
SiBEAM’s second generation chipsets consists of low cost, low power transmitter and receiver chipsets, each including an RF IC and network processor. The SB9220 Network Processor and the SB9210 RF Transmitter may be designed into devices such as A/V receivers, home theatre-in-a-box systems, Blu-ray players, set-top boxes and media centre PCs. The SB9221 Network Processor and the SB9211 RF Receiver chipset may be used in digital televisions, monitors and front projectors. SiBEAM’s second generation chipsets include all the features of the first generation plus the following advanced features:
  • Low cost, mass adoption price points
  • Lowest total power consumption for multi-gigabit wireless - ideal for CE systems via the elimination of the need for active cooling
  • Smaller form factor - suitable for inclusion in super slim DTV panels and smaller profile devices, such as Blu-ray players and notebook PCs
  • 3D video support
  • Integrated HDMI and LVDS
  • The only solution that offers support for both HDCP 2.0 and DTCP
  • Worldwide regulatory approvals
  • Backchannel (LR)-audio for enhanced surround sound capability
Newly Launched IP Licensing To Power Increased WirelessHD Growth
Building momentum to expand SiBEAM application areas with its second generation chipsets, SiBEAM launched an IP Licensing program to kick-start the development of embedded designs with WirelessHD technology. Through this program, SiBEAM will partner with industry leaders and provide incentives for the development of both fixed and portable WirelessHD A/V applications. SiBEAM will provide program participants with access to its full SB9220 chipset IP core that includes the MAC, PHY and embedded beam steering algorithms, WirelessHD SB9220 technical training, the SB921x WirelessHD RF Transceiver interface, verification environment and IP documentation
Reblog this post [with Zemanta]

Nick Flaherty on... Greening the data centre - 05/01/2010 - Electronics Weekly

Nick Flaherty on... Greening the data centre - 05/01/2010 - Electronics Weekly

Posted using ShareThis

Monday, January 04, 2010

VIA joins USB3 hub battle

VIA VL810 SuperSpeed USB hub controller allows a single USB port to be used by up to four high-bandwidth USB 3.0 devices simultaneously

VIA Technologies has developed an integrated single chip for USB3.0. Developed by wholly owned subsidiary company VIA Labs, the VIA VL810 expands a PC’s USB capability by allowing more than one device to be connected to each host port. One upstream port and four downstream ports support not just SuperSpeed transfer, but are also backwards compatible with previous USB specifications and offer support for Hi-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps) traffic.
Although VIA claims this to be the world's first, NEC has been shipping USB3.0 hub controller through 2009 (see below). This launch does however provide more credibility to USB3.0 as VIA is a major supplier to the Taiwanese motherboard makers.


“The growing emphasis on high-definition multimedia content is placing increasing demands on current data transfer technologies,” said Richard Brown, Vice President of Marketing of VIA Technologies. “SuperSpeed USB not only makes transferring HD video files, high pixel count digital photos, and backing up hard drives quick and easy, but VIA’s new hub controller allows consumers to get the most out of the technology by expanding the capacity of PC systems.”

Along with power management features that include the ability for devices to communicate latency tolerance to the host and for links to enter progressively lower power states when link partners are idle, VIA claims the VL810 is unique in that it is the first USB hub controller to use 80nm CMOS technology, further lowering the chip’s power usage.


Reblog this post [with Zemanta]

Wednesday, December 23, 2009

Ofcom specification opens up 60GHz for wireless gigabit Ethernet

Frequency dependent attenuation of electromagn...Image via Wikipedia
In a move that has crept under the radar (!) the UK regulator Ofcom has opened up the 60GHz band for unlicensed operation.
It is to open the spectrum in the 59 – 64 GHz band for Fixed Wireless Systems (FWS) and to combine this with the existing 57 – 59 GHz band under one overall licence exempt authorisation approach for FWS. This creates one contiguous and flexible block of spectrum providing 6.8 GHz of available bandwidth (57.1 – 63.9 GHz) taking into account two 100 MHz guard bands.
The large bandwidth available makes the new 57.1 – 63.9 GHz band (the “60 GHz band”) suitable for very high capacity, short hop FWS (e.g. 100MBit/s ~ 1GBit/s Ethernet systems). In addition the technical conditions that will be implemented along with the high propagation attenuation around 60 GHz will allow sharing between a wide range of applications (e.g. FWS, ITS, Wireless HD and others).
The various technical characteristics of the systems to be deployed, along with the high gaseous absorption propagation attenuation around 60GHz (see chart) implies that sharing should be possible between the various applications (Fixed, ITS, wireless HD & other) with a very low probability of interference.
Ofcom has also decided to incorporate a minimum antenna gain of 30 dBi into the technical conditions to
ensure that narrow beam antennas are employed. This decision will also bring the technical conditions into line with the new ECC recommendation ECC/REC/ (09)01 that replaces ERC/REC/12-09.
Specification:

The publication of the Final Regulatory Statement on licence exemption and exemption regulations come into force in the summer of 2010.
Reblog this post [with Zemanta]

Tuesday, December 22, 2009

Elpida Begins Mass Production of 40nm 2Gbit DDR3 SDRAM

DIMM with eight DDR3 SDRAM devices.Image via Wikipedia
Elpida Memory has started volume production of 40nm process 2GBIT DDR3 SDRAMs that will bring the price of DDR3 chips down and drive further adoption. Since completing development of the DDR3 SDRAM last October it has taken Elpida only two months to ramp up mass production at its Hiroshima plant.
The new 2Gbit device fits 44% more chips per wafer compared with Elpida's 50nm DDR3 SDRAM and a 100% yield for DDR3 products that operate at 1.6Gbps, the fastest speed standard for current DDR3. It also supports high-speed products. Compared with 50nm products, it uses about two-thirds less current and supports 1.2V/1.35V operation as well as DDR3 standard 1.5V, resulting in reduced power consumption of around 50%.
In the second quarter of 2010, 40nm process production will also begin at Rexchip, a subsidiary in Taiwan, to increase the manufacture of 40nm process products in order to lower products costs. Depending on conditions in the DRAM market, Elpida may transfer 40nm process technology to foundry partners ProMOS and Winbond to expand production based on this technology to an even higher level.
Reblog this post [with Zemanta]

UK Companies Slow to Grasp Plastic Electronics


We are on the brink of a new age of Plastic Electronics, production costs are tumbling and business opportunities are growing exponentially, yet companies are slow to take up the innovation challenge, according to research from the Advanced Institute of Management Research (AIM Research).
"Yoghurt pots that flash at you to say they're mouldy, animated e-papers like Harry Potter's Daily Prophet, smart packaging on pills that beep your doctor when you forget to take them - these applications are no longer the stuff of sci-fi," says Dr Zella King of Henley Business School. "Today, Plastic Electronics can already offer huge growth opportunities for companies."
The Plastic Electronics industry is predicted to be worth $335 billion by 2029, and the UK is leading the way on global innovations. Networks of UK universities and companies are collaborating on new technologies and products. As a measure of its significance, the UK Government launched its PE strategy on December 7 this year.
The opportunities are vast. The technology is here, and Plastic Electronics products are already being manufactured on a commercial scale. What is lacking, however, is involvement by product designers and market-led end users. Companies in the retail, healthcare, transport, electronics and packaging industries have yet to understand the revolution taking place. "They need to realise this is no longer the domain of electronics companies," says Dr King, "it is open to anyone seeking to add value to their existing portfolio by using new technology."
Smart companies got in at the start. Esquire magazine wowed readers last year with the first animated e-paper magazine cover. In January, Plastic Logic will launch QUE, its shatterproof, wireless, A4 e-reader no heavier than Vogue. And the latest range of intelligent bandages can measure oxygen levels in a patient's wound to determine when they need changing. A tiny antenna, printed into the fabric, then beeps the patient's doctor.
The beauty of Plastic Electronics is that electronic materials can be formed into circuits using cheap core materials. Products can be printed onto flexible surfaces like paper, film or fabric allowing the manufacture of thin, lightweight devices that will not shatter like glass-based liquid crystal displays. The costs are so low that, for example, disposable interactive games can be made for consumer promotions, sensors can be incorporated into smart packaging and bandages, and clothing can be printed with wearable electronics and solar cells.
But innovation is moving fast, and there will only be a small window of opportunity for companies to gain competitive advantage and global market share. The research suggests that strong business models are needed to channel the UK's world-leading expertise into the development of Plastic Electronics components and businesses. This will only happen where collaboration between technology companies and research organisations is led by firms that have a vision of how to create customer value from Plastic Electronics.

Reblog this post [with Zemanta]

Arizona State stacks nanoscale memory chips

Researchers improve chip memory by stacking cells

Researchers at Arizona State University have developed an elegant method for significantly improving the memory capacity of electronic chips.
The researchers have shown that they can build stackable memory based on 'ionic memory technology' which could make them ideal candidates for storage cells in high-density memory. Best of all, the new method uses well-known electronics materials.
“This opens the door to inexpensive, high-density data storage by ‘stacking’ memory layers on top one another inside a single chip,” said Michael Kozicki, an ASU electrical engineering professor and director of the Center for Applied Nanoionics. “This could lead to hard drive data storage capacity on a chip, which enables portable systems that are smaller, more rugged and able to go longer between battery charges.”
“This is a significant improvement on the technology we developed two years ago where we made a new type of memory that could replace Flash, using materials common to the semiconductor industry (copper-doped silicon dioxide). What we have done now is add some critical functionality to the memory cell merely by involving another common materia – silicon.”
Kozicki outlined the new memory device in a technical presentation he made in November at the 2009 International Electron Devices and Materials Symposia in Taiwan. Kozicki said that given current technology, electronics researchers are fast reaching the physical limits of device memory. This fact has spurred research into new types of memory that can store more information into less and less physical space. One way of doing this is to stack memory cells.
Kozicki said stacking memory cells has not been achieved before because the cells could not be isolated. Each memory cell has a storage element and an access device; the latter allowing you to read, write or erase each storage cell individually.
“Before, if you joined several memory cells together you wouldn’t be able to access one without accessing all of the others because they were all wired together,” Kozicki said. “What we did was put in an access, or isolation device, that electrically splits all of them into individual cells.”
Up until now, people built these access elements into the silicon substrate.
“But if you do that for one layer of memory and then you build another layer, where will you put the access device,” Kozicki asked. “You already used up the silicon on the first layer and it’s a single crystal, it is very difficult to have multiple layers of single crystal material.”
The new approach does use silicon, but not single crystal silicon, which can be deposited in layers as part of the three-dimensional memory fabrication process. Kozicki said his team was wrestling with how to find a way to build a diode into the memory cell. The diode would isolate the cells.
Kozicki said this idea usually involves several additional layers and processing steps when making the circuit, but his team found an elegant way of achieving diode capability by substituting one known material for another, in this case replacing a layer of metal with doped silicon.
“We can actually use a number of different types of silicon that can be layered,” he said. “We get away from using the substrate altogether for controlling the memory cells and put these access devices in the layers of memory above the silicon substrate.”
“Rather than having one transistor in the substrate controlling each memory cell, we have a memory cell with a built-in diode (access device) and since it is built into the cell, it will allow us to put in as many layers as we can squeeze in there,” Kozicki said. “We’ve shown that by replacing the bottom electrode with silicon it is feasible to go any number of layers above it.
With each layer applied, memory capacity significantly expands.
“Stackable memory is thought to be the only way of reaching the densities necessary for the type of solid state memory that can compete with hard drives on cost as well as information storage capacity,” Kozicki said. “If you had eight layers of memory in a single chip, this would give you almost eight times the density without increasing the area.”
Reblog this post [with Zemanta]

Monday, December 21, 2009

MPEGIF Launches “3D over MPEG” Campaign

The MPEG Industry Forum (MPEGIF) has formed a 3DTV Working Group with a “3D over MPEG” campaign. The new working group and campaign continue MPEGIF’s successful work in furthering the widespread adoption and deployment of MPEG-related standards including MPEG-4 AVC/H.264 video compression technology.
“3DTV is of keen interest to everyone in the video creation and delivery industries. The challenge we all face is that of sorting through the myriad technical options. Our common goal is to create a 3DTV ecosystem that delivers great new experiences to consumers.” says Dr. Sean McCarthy, chair of the newly formed 3DTV Working Group and Fellow of the Technical Staff at Motorola. “The 3DTV Working Group and the ‘3D over MPEG’ campaign are designed to provide focus and clear information to decision makers. 3DTV can be distributed today using MPEG-related standards. Existing broadband and broadcast services and infrastructures are 3D-ready, and ongoing works by standards bodies provide a compelling path for the future evolution of 3DTV.”


The 3DTV Working Group will provide a forum for free exchange of information related to this emerging technology, an industry voice advocating the adoption of standards and for consolidating the overall direction of the 3DTV industry. Its focus and constituency will be derived from video service providers, consumer electronics manufacturers, content owners, equipment manufacturers, system integrators, software providers, as well as industry advocacy groups, industry analysts, financial institutions and academic institutes.
“3D video is showing distinct commercial promise in theatrical releases and could thus transition to the advanced living room to follow High Definition and Surround Sound. As a result there is a growing array of competing technologies and work from various standards bodies”, said David Price, Vice President, MPEGIF and Vice President at video compression company Harmonic. “It has therefore become a major theme of the next MPEG Industry Forum Master Class being held at CES 2010 in Las Vegas in January featuring leading executives from HBO, AT&T, Microsoft and other industry luminaries”.


Reblog this post [with Zemanta]

Step forward for multicore Linux

CriticalBlue and MontaVista Partner to Expand Multicore Software Development

CriticalBlue, the Edinburgh-based pioneer of embedded multicore software analysis, exploration and verification tools, has joined the MontaVista partner program and will make their Prism product available on MontaVista Linux 6 and Montavista Linux Carrier Grade Edition products.
This announcement continues the broadening of Prism integrations with key players in the multicore software development eco-system by adding support for an industrial strength, commercial quality Linux. Prism is an award-winning embedded multicore programming system which allows software engineers to easily asses and realize the full potential of multicore processors without significant change to their development flow. It analyzes the behavior of code running on either hardware development boards or simulators. It allows engineers to take their existing sequential code, and without making any changes, explore and analyze opportunities for concurrency. Having identified the optimal parallelization strategy in this way, the developer will implement parallel structures, and use Prism again to verify efficient and thread-safe operations.
MontaVista Linux is the first commercial Linux provider to be supported by Prism. The Prism Eclipse plug-in will be integrated into the MontaVista DevRocket integrated development environment (IDE), providing the most advanced embedded Linux development environment for multicore software on the market. MontaVista customers will now be able to quickly analyze the potential benefit of new, high-performance, multicore software platforms for their existing application code and develop new code and quickly tune it for operation on multicore processors, all within a single MontaVista DevRocket environment, and all in the familiar Eclipse framework.
Prism is available today for ARM and MIPS cores with several other leading multicore processor architectures coming in Q1 2010.
“Developers need to analyze their real world applications running on commercial Linux platforms like MontaVista Linux using common frameworks like Eclipse,” said David Stewart, CEO, CriticalBlue. “By partnering with MontaVista, and integrating with the MontaVista DevRocket IDE, Prism will support the broadest range of platforms on a commercial quality Linux, allowing our joint customers a way to rapidly ensure safe and timely migration of their software onto multicore platforms and efficient exploitation of the parallelism inherent within.”

“By combining CriticalBlue’s Prism solution, MontaVista Linux and MontaVista DevRocket, our customers will benefit from the most advanced multicore integrated development environment available for embedded Linux,” said Dan Cauchy, vice president, marketing at MontaVista Software. “This integrated environment will allow developers to quickly analyze, convert and tune sequential code into parallel code and harness the full capabilities of MontaVista Linux running on modern multicore processors.”


Reblog this post [with Zemanta]