All the latest quantum computer articles

See the latest stories on quantum computing from eeNews Europe

Thursday, May 26, 2011

Boosting multicore performance

Two new techniques speed multicore performance by up to 40%

By Nick Flaherty www.flaherty.co.uk

Researchers from North Carolina State University have developed two new techniques to help maximize the performance of multi-core computer chips by allowing them to retrieve data more efficiently, which boosts chip performance by 10 to 40 percent.
To do this, the new techniques allow multi-core chips to deal with two things more efficiently: allocating bandwidth and “prefetching” data.
Multi-core chips are supposed to make our computers run faster. Each core on a chip is its own central processing unit, or computer brain. However, there are things that can slow these cores. For example, each core needs to retrieve data from memory that is not stored on its chip. There is a limited pathway – or bandwidth – these cores can use to retrieve that off-chip data. As chips have incorporated more and more cores, the bandwidth has become increasingly congested – slowing down system performance.
One of the ways to increase the core performance is prefetching. Each chip has its own cache and with prefetching, the cache predicts what data a core will need in the future and retrieves that data from off-chip memory before the core needs it. Ideally, this improves the core’s performance. But if the cache’s prediction is inaccurate, it unnecessarily clogs the bandwidth while retrieving the wrong data. This actually slows the chip’s overall performance.
“The first technique relies on criteria we developed to determine how much bandwidth should be allotted to each core on a chip,” says Dr. Yan Solihin, associate professor of electrical and computer engineering at NC State and co-author of a paper describing the research. Some cores require more off-chip data than others. The researchers use easily-collected data from the hardware counters on each chip to determine which cores need more bandwidth. “By better distributing the bandwidth to the appropriate cores, the criteria are able to maximize system performance,” Solihin says.
“The second technique relies on a set of criteria we developed for determining when prefetching will boost performance and should be utilized,” Solihin says, “as well as when prefetching would slow things down and should be avoided.” These criteria also use data from each chip’s hardware counters. The prefetching criteria would allow manufacturers to make multi-core chips that operate more efficiently, because each of the individual cores would automatically turn prefetching on or off as needed.
Using both sets of criteria, the researchers were able to boost multi-core chip performance by 40 percent, compared to multi-core chips that do not prefetch data, and by 10 percent over multi-core chips that always prefetch data.
The paper, “Studying the Impact of Hardware Prefetching and Bandwidth Partitioning in Chip-Multiprocessors,” will be presented on June 9th at the International Conference on Measurement and Modeling of Computer Systems (SIGMETRICS) in San Jose, Calif. The paper was co-authored by Dr. Fang Liu, a former Ph.D. student at NC State.
Enhanced by Zemanta

Wednesday, May 25, 2011

Rohde & Schwarz sniff protocols with security software acquisition

Adds software to monitor VOIP and P2P packets
By Nick Flaherty www.flaherty.co.uk

With the acquisition of ipoque, a startup in Leipzig specialising in Internet traffic management and network analysis, German radio test equipment maker Rohde & Schwarz is entering an entirely new market segment in the field of security.
Ipoque was founded in 2005 and focuses on bandwidth management and network monitoring, especially for critical and hard-to-detect protocols. This includes voice over IP (VoIP), peer-to-peer (P2P) file sharing and media streaming. Together with ipoque, Rohde & Schwarz will expand its radiomonitoring and radiolocation business: The company primarily develops products and systems for frequency management as well as for internal and external security.
"For a long time now, we have been planning to enter the Internet traffic management market," said Peter Riedel, Head of the Radiomonitoring and Radiolocation Division and member of Corporate Management at Rohde & Schwarz. "We expect to gain an enormous potential for growth from this new segment. In acquiring ipoque, we have found a partner whose innovative and globally leading core technology – deep packet inspection (DPI) – blends in excellently with the portfolio of a high-tech company such as Rohde & Schwarz."
Hendrik Schulze, co-founder and CTO of ipoque GmbH, also sees great potential in the collaboration with Rohde & Schwarz: "Backed by a renowned, solid partner, we will be able to tap new markets and customer groups. In addition, of course, we will profit from the worldwide Rohde & Schwarz sales network."
Like other fully owned Rohde & Schwarz subsidiaries, ipoque will operate under the name "ipoque – a Rohde & Schwarz company". By acquiring ipoque, Rohde & Schwarz has tapped into a new business segment, which it plans to expand at a rapid pace. For this reason, the number of staff at the location in Leipzig, currently 72 employees, will be considerably increased said Riedel.
Enhanced by Zemanta

Silicon Labs drives energy harvesting for wireless networks

Turnkey Energy Harvesting Reference Design 

By Nick Flaherty www.flaherty.co.uk


Silicon Labs has launched what it claims is the industry's most energy-efficient wireless sensor node solution powered by a solar energy harvesting source. A turnkey energy harvesting reference design enables developers to implement self-sustaining, ultra-low-power wireless sensor networks for home and building automation, security systems, industrial control applications, medical monitoring devices, asset tracking systems and infrastructure and agricultural monitoring systems.
The $45 reference design includes wireless network and USB software and a complete circuit design with RF layout, bill of materials (BOM), schematics and Gerber files. The design consists of three components:

  • A solar-powered wireless sensor node that measures temperature, light level and charge level, using an Si10xx wireless MCU to control the sensor system and transmit data wirelessly and a thin-film battery to store harvested energy.
  • A wireless USB adapter that connects the wireless sensor node to a PC for displaying sensor data; the adapter features Silicon Labs' Si4431 EZRadioPRO transceiver with an MCU running USB-HID class software and EZMac wireless software stack.
  • A wireless sensor network GUI that displays data from up to four sensor nodes.

The thin film battery used in the energy harvesting reference design has a capacity of 0.7 mAh. In direct sunlight, the battery can be recharged fully in only two hours. While in sleep mode, the wireless sensor node will retain a charge for 7,000 hours. If the wireless system is transmitting continuously, it will operate non-stop for about three hours, although it is designed to constantly recharge itself at an appropriate level to keep the thin-film battery from completely discharging.
The market for energy harvesting devices is poised to grow exponentially this decade. IDTechEx forecasts that more than ten billion energy harvesting devices will ship by 2019 - a 20x increase over the roughly 500 million units that shipped in 2009. Although systems powered by harvested energy sources have existed for many years, developers have been challenged to implement wireless sensor nodes within very low power budgets. Energy harvesting simplifies these applications by eliminating the inconvenience of replacing batteries in inaccessible locations, while also reducing the quantity of depleted batteries for recycling or dumped in landfills.
"As part of our global commitment to green technology, Silicon Labs has advanced the use of energy harvesting technology to free wireless networking systems from the cost, inconvenience and negative environmental impact of conventional batteries," said Mark Thompson, vice president of Silicon Labs' Embedded Mixed-Signal products. "By combining ultra-low-power wireless MCU technology with a state-of-the-art energy harvesting system, Silicon Labs has delivered the industry's most energy-efficient, self-sustaining wireless networking solution."
Silicon Labs' energy harvesting reference design accommodates a wide range of harvested energy sources. An on-board bypass connector gives developers the flexibility to bypass the solar cell and tap other energy harvesting sources such as vibration (piezoelectric), thermal and RF.
Enhanced by Zemanta

Ford develops heart monitor in car seats

By Nick Flaherty www.flaherty.co.uk

Ford engineers in Germany have developed a car seat that can monitor a driver’s heartbeat.
A joint project undertaken by experts from Ford’s European Research and Innovation Centre in Aachen, Germany and Rheinisch-Westfälische Technische Hochschule (RWTH) Aachen University, the seat uses six special embedded sensors to detect electrical impulses generated by the heart.
“Although currently still a research project, the heart rate monitor technology developed by Ford and RWTH Aachen University could prove to be a hugely important breakthrough for Ford drivers, and not just in terms of the ability to monitor the hearts of those known to be at risk,” said Dr Achim Lindner, Ford European Research and Innovation Centre medical officer. “As always in medicine, the earlier a condition is detected the easier it is to treat and this technology even has the potential to be instrumental in diagnosing conditions drivers were previously unaware they had.”
Ford developed the six-sensor system positioned on the surface of the seat backrest. The unobtrusive electrodes have been specially designed to be able to detect the electronic signature of the heart through clothing.
“The sensors use a very specially designed system and carefully researched materials to be able to give a good signal without contact on the skin,” said Lindner. “We are still fine-tuning their operation to work with some materials; certain types of synthetic fabric and lamb’s wool can cause electrical interference that upsets the signal, but we can achieve a strong signal through 10 layers of cotton.”
In stationary testing, 90 to 95 percent of subjects proved to be compatible and on-road testing of the Ford heart rate monitoring seat proved it was possible to achieve highly accurate readings for up to 98 percent of the time spent behind the wheel, even at this early stage of development.
Data collected by the sensors, for example, could be analyzed by medical experts or onboard computer software. Possibilities therefore abound, notes Lindner, from linking to remote medical services and Ford vehicle safety systems to even providing real-time health information and alerts of imminent cardiovascular issues such as a heart attack.
Ford is also researching how to use its SYNC technology and its ability to connect devices via Bluetooth, access cloud-based Internet services and control smartphone apps to develop voice-controlled in-car connections to health aids from glucose monitoring devices, diabetes management services, asthma management tools and Web-based allergen alert solutions.
The seat sensor technology under development could initially be of most benefit to drivers known to have heart conditions – primarily those in more mature age groups, a globally growing population.
“With increasing life expectancy meaning higher numbers of people and therefore drivers at risk of heart diseases, the ability to monitor hearts at the wheel could offer massive benefits in terms of health and road safety, both for the user and the wider public,” said RWTH Aachen University Professor Steffen Leonhardt, who originally proposed taking the university’s work with contactless infant heart monitoring to Ford. “The car is an obvious choice; it’s a place where occupants spend long periods sitting in a rather calm position and a place that’s increasingly less physically demanding, making it the ideal environment to measure heart activity.”


Enhanced by Zemanta

Tuesday, May 24, 2011

NetLogic starts volume production of IPv6 processors

New generation of IPv6 equipment from Tier One OEMs


By Nick Flaherty www.flaherty.co.uk

NetLogic Microsystems is shipping its NL11k family of IPv6 knowledge-based processors in volume for delivery to customers’ next generation of IPv6 switches and routers. The first of over two dozen IPv6 systems from leading original equipment manufacturers (OEMs) that are using the NL11k knowledge-based processors will begin shipping in production in the third quarter of 2011, with the remaining customer systems expected to commence shipping over the following twelve months.

“The emergence of LTE and IPv6 has dramatically increased the need for knowledge-based processors with significantly higher performance, larger database capacities and smaller thermal footprints. We are pleased to continue to lead the market in breakthrough innovations and product development excellence to bring to market six generations of best-in-class products.”
These new systems from Tier One OEMs are now being launched to support an increased level of IPv6 traffic with typical configurations now handling up to 33% native IPv6 traffic, which represent a major upgrade from previous generations of IPv4 equipment. To support IPv6’s 4x longer Internet addresses, as well as the exponential increase in the complexity and throughputs of network traffic, these new systems are adopting the most advanced knowledge-based processors from NetLogic Microsystems. This results in a more than doubling of the dollar content of knowledge-based processors per system over previous generations of equipment across every OEM customer.
In addition to these NL11k processor-based systems, Tier One OEMs are also designing with NetLogic Microsystems’ NL10k and NL82048 families of IPv6 knowledge-based processors into additional systems that will begin shipping throughout 2012. Moreover, these OEMs are expected to continue to upgrade their IPv6 equipment over their following successive generations of equipment to be able to support the ever increasing native IPv6 traffic in which is expected to continue to grow and become the substantial majority of traffic over time.
“We are excited by our volume production launch of the NL11k processors as it marks an important milestone in our next phase of growth for our knowledge-based processors into next-generation IPv6 equipment,” said Chris O’Reilly, vice president of marketing at NetLogic Microsystems. “The emergence of LTE and IPv6 has dramatically increased the need for knowledge-based processors with significantly higher performance, larger database capacities and smaller thermal footprints. We are pleased to continue to lead the market in breakthrough innovations and product development excellence to bring to market six generations of best-in-class products.”
The exhaustion of IPv4 Internet addresses, driven by the proliferation of connected mobile devices, is forcing service providers and network owners to migrate to the new IPv6 Internet addressing scheme which increases the number of available addresses by more than 28 orders of magnitude. According to the Wall Street Journal in a Feb. 1 article, a permanent shift to IPv6 is now inevitable following the Internet Assigned Numbers Authority’s (IANA) final allocation of its free pool of available IPv4 addresses.
Industry momentum in the migration to IPv6 continues to accelerate. On June 8th this year, Internet giants and service providers such as Google, Facebook, Yahoo, Comcast, Time Warner Cable and Akamai will offer and deliver their content over IPv6 in preparation for a successful transition as IPv4 addresses run out.
This migration to the longer IPv6 addresses, coupled with the exponential increase in the complexity and throughputs of network traffic, are driving an unprecedented need for knowledge-based processors with significantly higher performance and database capacity. To meet these stringent requirements, new knowledge-based processing architectures and circuit innovations such as those offered by the NL11k processor are needed to accelerate complex networking functions such as classification, security, routing/forwarding and deep-packet inspection.
 The NL11k processor family adopts a ground-breaking “hybrid” architecture that combines its best-in-class, massively parallel knowledge-based processing engines with the low-power efficiency and flexibility of its algorithmic Sahasra technology to reduce power consumption while delivering higher performance, capacity and scalability. The NL111024 knowledge-based processor, the flagship product in the NL11k family, delivers 1.6 billion decisions per second (BDPS), and integrates 128 high-performance knowledge-based processing engines, the Sahasra Algorithmic Engines (SAEs) and an enhanced Intelligent Load Balancing Engine (ILBE) to efficiently allocate multiple tasks and communicate among all the knowledge-based processing engines and SAEs.
The NL11k processor family also features the world’s first knowledge-based processors with high-speed serial interface that delivers 225 Gbps of raw chip-to-chip interconnect bandwidth. This represents a 340 percent increase in I/O bandwidth-per-pin to deliver an improved balance between the processing engines and the I/O performance to allow wider IPv6 keys to be processed at the same search rate as narrower IPv4 keys. This enables significantly higher system performance and system density for next-generation systems to enable significantly richer services for LTE and IPv6 equipment.
Manufactured in 40nm process technology, the NL11k knowledge-based processors also integrate an innovative Range Encoding Engine (REE), which employs advanced one-hot and fence encoding algorithms to implement range encoding that allows customers to effectively double the efficiency of performing port range inspection.

Enhanced by Zemanta

Redpine moves to 3x3 MIMO for HD video over WiFi

BEAM450 chipset includes MIMO ML decoding, transmit beamforming and simultaneous dual-band for 450Mbit/s throughput

By Nick Flaherty www.flaherty.co.uk

Redpine Signals has developed a family of highly integrated semiconductor products conforming to the 802.11n standard that are the first MIMO chips to support "software configurable simultaneous dual-band." This patent pending feature enables the system integrators to re-configure the MIMO chipset on-the-fly from a 3-Spatial Stream 450Mbps 3x3 system (working in either 2.4GHz or 5GHz ISM bands) into a simultaneous dual-band system with 150Mbps in one band and 300Mbps in the other band.
Simultaneous dual-band enables robust QoS provisioning for demanding video applications in crowded wireless environments, and the Maxi-Fi® BEAM450 provides this at zero cost and power overhead to the system. The new Maxi-Fi products include the RS9330 802.11n Baseband chip interfacing to either the RS8330 (Dual-band MIMO Radio chip) or the RS8331 (Dual-band MIMO Radio chip with built-in high power-amplifiers).
Redpine also provides TURBO900 and TURBO1350 reference designs, which use two or three RS9330 chips respectively. These designs provide physical layer throughputs of 900Mbps and 1.35Gbps on a "single" PCI-e host interface, thus addressing the performance requirements of today's most demanding wireless video applications.
With CMOS integration of a high performance MAC, baseband processor, analogue front-end, crystal oscillator, calibration EEPROM, balun, dual-band RF transceiver and dual-band high-power amplifiers (RS8331 only), the chips are targeting high throughput and high QoS wireless applications such as HD video streaming, storage devices, wireless routers, broadband access modems, televisions, access points, and set-top boxes. The chipset maintains over 300Mbps of TCP data throughput on various host platforms and runs on the 802.11n MAC on an SoC based on Redpine's proprietary four-threaded processor (ThreadArch) with very low-host overhead.
The chipsets will be sampling in Q3-2011, with volume shipment scheduled for Q1-2012.

Enhanced by Zemanta

Monday, May 23, 2011

Digilent opens up Arduino with 32bit Microchip development boards

Dev Boards and Open-Source Software for protoyping and teaching

By Nick Flaherty www.flaherty.co.uk

Digilent has launched a development board for the popular open source Arduino microcontroller technology based around a 32bit chip from Microchip, reducing the cost of the boards and the end system.
This will open up more opportunities for prototyping, teaching in universities and hobbyists as well as other non-electronics applications. The recent USB typewriter (below), for example, was based on the Arduino platform.

Designed and manufactured by Digilent, the chipKIT platform enables hobbyists and academics to easily and cheaply integrate electronics into their projects, even if they do not have an electronic-engineering background. The platform consists of two PIC32-based development boards and open-source software that is compatible with the Arduino programming language and development environment, thanks to the work done by Mark Sproul and Rick Anderson through Fair Use Building and Research Labs. 
A key point is that the 32bit chipKIT hardware is compatible with existing 3.3V Arduino shields and applications, and can be developed using a modified version of the Arduino IDE and existing Arduino resources, such as code examples, libraries, references and tutorials. This means existing code can be easily dropped into the development system, with boards at $27 and $50.



The chipKIT boards use a PIC32 MIPS M4K processor running at 80MHz with up to 512KB Flash and 128KB RAM, as well as Ethernet, CAN, and USB (Full-Speed Host, Device and OTG); plus peripherals such as multiple timers, a 16-channel 1 MSPS Analogue-to-Digital Converter (ADC), two comparators, and multiple I2C, SPI, and UART interfaces. 
At the same time the Arduino programming environment has been modified and extended so that it supports the PIC32-based chipKIT boards, as well as traditional Arduino boards. The Arduino standard libraries have been also been modified to support chipKIT boards and traditional Arduino boards. All of this work has been contributed back to the open-source Arduino community. Aside from a small number of shields that require 5V operation, many existing Arduino hardware and software sketches are compatible with the chipKIT platform, without modification.
“Students, educators and hobbyists, with or without electronic-engineering backgrounds, are looking for inexpensive solutions that will enable them to easily integrate electronics into their projects,” said Derek Carlson, Microchip’s vice president of Development Systems. “The chipKIT boards and software meet these needs, providing far more features, performance and functionality than any other Arduino solution on the market, at a low cost.”
“The chipKIT platform is the first and only 32-bit solution of its kind in the industry,” said Clint Cole, president of Digilent. "Academics and hobbyists can plug the boards into their design, download the open-source software and have their project up and running in minutes.”
The chipKIT Uno32 (part # TDGL002) development board is a clone of the Arduino Uno board, and features 128 KB Flash program memory and 16 KB RAM, with two each of the I2C, SPI and UART peripherals. This board is priced at $26.95 each. 
 A clone of the Arduino Mega board, the chipKIT Max32 (part # TDGL003) development board features 512 KB Flash program memory and 128 KB RAM, with USB, CAN and Ethernet communication, as well as 5 each I2C, 4 each SPI, and 6 each UART peripherals. The chipKIT Max32 board is priced at $49.50 each. Both chipKIT boards can be ordered today, at http://www.microchip.com/get/TDD2. Additionally, the open-source software for both boards is available today at http://www.microchip.com/get/TDD2. chipKIT Network and I/O Shields are expected to be available in June 2011.
Enhanced by Zemanta

Freescale moves Coldfire microcontrollers to 90nm with added mixed signal

FlexMemory and ultra-low power consumption for consumer and industrial applications on next generation devices
By Nick Flaherty www.flaherty.co.uk

In a move that will be welcomed by many embedded system designers, Freescale has ported its Coldfire architecture to 90nm and added more mixed signal capability to give higher integration and lower power consumption. 
Built on 90nm thin film storage flash technology with FlexMemory, the ColdFire+ MCF51Qx and MCF51Jx microcontroller (MCU) families are built upon Freescale’s strong heritage of 32-bit MCU development and the new families are the next step in the evolution of ColdFire architecture says the company. The ColdFire+ Qx and Jx families bring new features to the ColdFire portfolio, including FlexMemory, configurable embedded electrically erasable programmable read-only memory (EEPROM), highly-accurate mixed-signal capability, low-power features and additional application-specific peripherals for consumer devices.
“We developed the new ColdFire+ MCUs to help our customers achieve their design goals calling for smaller, low-power and cost-effective MCUs,” said Jeff Bock, director of marketing for Freescale’s Industrial and Multimarket MCU business. “With more than 40 new products under the ColdFire+ umbrella and a comprehensive set of design and enablement tools, we’re giving our customers what they need to create the next generation of energy-efficient industrial and consumer devices.”
The ColdFire+ Qx and Jx product families are aimed at industrial applications like building control (HVAC and light automation) and portable medical devices, as well as portable consumer devices. Capabilities include encryption and security, USB audio, capacitive touch interfaces and display technology. ColdFire+ MCUs can provide these functions while helping to provide optimal battery life and reduced size and cost.
ColdFire+ MCUs also offers a touch sensing module, which, when combined with Freescale’s recently introduced Xtrinsic Touch-Sensing Software, simplifies touch key configuration by allowing multiple electrode array combinations and provides designers a full-scale, highly accurate and robust touch sensing solution.

ColdFire+ MCF51Qx and MCF51Jx families
The ColdFire+ portfolio includes the MCF51JF, MCF51JU, MCF51QM, MCF51QF, MCF51QH and MCF51QU families. These families are pin- and software-compatible and feature:

• Innovative FlexMemory, configurable EEPROM
• 10 flexible ultra-low-power modes
• 16-bit ADC and 12-bit DAC, providing flexible and powerful mixed-signal capability
• Cryptographic acceleration unit and random number generator for secure communication
• Integrated capacitive touch sensing and display support
• Jx only: integrated USB 2.0 full-speed device/host/OTG controller, supporting connection and battery charging via USB
• Jx only: serial audio interface, providing direct interface to codecs and inter-IC sound (I2S) audio devices
• Package sizes as small as 5x5 mm for space-constrained applications

The software bundle features Freescale’s complimentary MQX real time operating system (RTOS) with USB audio, mass storage, human interface device and class stacks that help simplify hardware management and streamline software development. Also included is CodeWarrior Development Studio, a comprehensive integrated development environment with MQX RTOS kernel awareness for advanced debug support that is based on the Eclipse open development platform, providing a visual and automated framework to accelerate the development of complex embedded applications. In addition, Freescale’s Tower System, a modular development platform, potentially saves months of development time through rapid prototyping and tool re-use. 
Enhanced by Zemanta

Antenova launches complete surface mount GPS system

Puts u-blox GPS and antenna in a Surface Mount Device with Easy External Matching

By Nick Flaherty www.flaherty.co.uk

Cambridge antenna developer Antenova  has developed a surface mount GPS Radio Antenna Module taht combines the u-blox 6 GPS chipset with Antenova’s high performing GPS antenna for embedded GPS, machine-to-machine (M2M) and mobile device manufacturers. The M10382 uses Antenova's latest Laser Direct Structuring (LDS) technology in a compact low profile package to give a complete GPS system solution in a compact surface mountable device with novel external matching which offers ease of tuning for each device platform.
"The M10382 is the result of customer demand for a smaller, low cost and surface mountable GPS radio antenna module for the exploding embedded GPS and connected device markets,” said Greg McCray, CEO of Antenova. ”The M10382 incorporates the u-blox 6 GPS engine with Antenova’s high performing GPS antenna technology and is the latest addition to our industry leading range of GPS RADIONOVA radio antenna modules. Antenova’s GPS RADIONOVA modules have been designed from inception to deliver a high performing drop-in system solution that will work with a range of GPS receiver chips. This flexibility enables us to continually provide customers with a complete RF antenna module with the GPS receiver option of their choice and one that is best suited for their device applications.”
The M10382 is a highly integrated GPS RF antenna module suitable for L1-band GPS and A-GPS systems. The device combines the u-blox 6 UBX-G6010-ST GPS receiver IC with Antenova’s high efficiency GPS antenna. All front-end and receiver components are contained in a small 24.2 x 9.9 x 3.9 mm3 surface mountable device providing a complete GPS receiver for optimum performance. M10382 operates on a single 1.8V or 3.3V positive supply with low power consumption and several low power modes for further power savings. An accurate 0.5ppm TCXO and very low noise LNA ensures high sensitivity and short time-to-first-fix (TTFF). The M10382 is supported by u-blox stand alone software and is compatible with UART, SPI, DDC, I2C and USB host processor interfaces. M10382 also benefits from Antenova’s patented external matching that ensures easy tuning for each platform.
Enhanced by Zemanta

Saturday, May 21, 2011

NXP demonstrates new 'car-to-anything' IEEE802.11p comms platform

Car-to-x (C2X) communication on a public road in Holland
By Nick Flaherty www.flaherty.co.uk

Dutch chip maker NXP Semiconductors has demonstrated car-to-x (C2X) communication on a public road in the Netherlands. With this demo, NXP is the first semiconductor company to take the step from showing concepts to actually demonstrating an automotive-ready hardware platform for connected mobility. 
NXP has co-developed the C2X platform with Australian-based Cohda Wireless to combine telematics for location-based services and networking security so that the car can communicate with kerb-side and wide area systems and other cars.
The C2X communication uses the IEEE802.11p wireless standard designed specifically for automotive applications. This allows cars to communicate with each other (car-to-car) as well as with intelligent traffic infrastructure (car-to-infrastructure) around them. The C2X platform from NXP and Cohda picks up information from other cars and static traffic systems so that drivers receive early warnings of cars hidden from sight behind trucks or approaching from around corners. Other use cases are warnings about emergency vehicles and traffic jams, or traffic light signals allowing drivers to adjust their speed and optimize driving.
The C2X platform is able to meet the requirements of the automotive industry: reliable signal reception for fast-moving objects even in difficult surroundings, cost-efficient design, and flexible programming. It uses Cohda’s 802.11p patented radio reception algorithms and is based on NXP’s multi-standard radio reception platform.
NXP is project leader of the Dutch SPITS research project (SPITS: Strategic Platform for Intelligent Transport Systems) and  is also demonstrating intelligent traffic data analysis from the in-vehicle networks, as well as emergency and breakdown calls based on NXP’s telematics module, ATOP.
“Connecting the car to the environment demands in-depth expertise in secure connectivity, Software-Defined Radio architectures, and telematics," said Kurt Sievers, senior vice president and general manager of the Automotive business at NXP Semiconductors. "The SPITS project has been extremely valuable for us as it brought experts and research partners from all parts of the value chain together all working towards the same goal: efficient and sustainable mobility solutions.”

www.nxp.com/spits

About SPITS project

The Strategic Platform for Intelligent Transport Systems (SPITS) project has three main areas: traffic management and safety, concepts for open in-car platform, and downloadable services. SPITS was aimed at creating an open and affordable intelligent transport system platform, which is scalable, secure and real-time. The Dutch Ministry of Economic Affairs has subsidised the project. The consortium is lead by NXP Semiconductors and consists of eight companies (NXP, TomTom, TNO, Logica, Catena, Task24, Foutress, GreenCat), one research institute, and four universities. 
The SPITS system comprises the vehicle on-board unit (OBU), the Road Side Unit (RSU) infrastructure, and the Back Office (BO) service centre. Communications between these elements is a major part of the Strategic Platform. After the SPITS project officially ends, consortium members will continue to refine the SPITS results for commercial use across Europe and beyond. These projects represent an investment by the Government to retain key knowledge from R&D companies within the Netherlands, following the economic crisis.
Enhanced by Zemanta

Friday, May 20, 2011

World's smallest 3D printer

LED printer at just 1200 euros
By Nick Flaherty www.flaherty.co.uk

A research project at the Vienna University of Technology (TU Vienna) is aiming to could turn futuristic 3D-printers into affordable everyday items.
Printers which can produce three-dimensional objects have been available for years but the project has developed a much smaller, lighter and cheaper version that could be mass produced to brign down the cost. This would allow anyone to produce small, taylor-made 3D-objects at home, using building plans from the internet – and this could save money for expensive custom-built spare parts.
Several scientific fields have to come together to design the 3D-printer. The device was assembled by mechanical engineers in the research group of professor JĂĽrgen Stampfl, but also the chemical research by the team of professor Robert Liska was of crucial importance: first, chemists have to determine which special kinds of synthetic material can be used for printing.
The basic principle of the 3D-printer is quite simple: The desired object is printed in a small tub filled with synthetic resin. The resin has a very special property: It hardens precisely where it is illuminated with intense beams of light. Layer for layer, the synthetic resin is irradiated at exactly the right spots and as one layer hardens, the next layer can be attached to it, until the object is completed in a process called 'additive manufacturing technology'. 
“This way, we can even produce complicated geometrical objects with an intricate inner structure, which could never be made using casting techniques,” said Klaus Stadlmann who developed the prototype together with Markus Hatzenbichler.
This method is not designed for large-scale production of bulk articles – for that, there are cheaper alternatives. The great advantage of additive manufacturing is the fact that is offers the possibility to produce bespoke individually adjusted items. The prototype of the printer is no bigger than a carton of milk, it weighs 1.5 kilograms, and at just 1200 Euros, it was remarkably cheap. “We will continue to reduce the size of the printer, and the price will definitely decrease too, if it is produced in large quantities”, Klaus Stadlmann believes.

LED for Higher Resolution
The individual layers hardened by the light beams are just a twentieth of a millimetre thick. Therefore, the printer can be used for applications which require extraordinary precision – such as construction parts for hearing aids. Unlike previous models, the printer at TU Vienna uses light emitting diodes (LEDs), with which high intensities of light can be obtained at very well-defined positions.
The research group for additive manufacturing technologies at TU Vienna is working with a variety of different 3D-techniques and materials. New materials – such as special ceramics or polymers – are constantly being developed for 3D-printing. 3D objects can now even be made from eco-friendly biodegradable substances. In cooperation with biologists and physicians, the scientists could show that the artificial structures created with their 3D-printer technology are perfectly suited to serve as a scaffold that supports natural growth of bone structure in the body.

Versatility

No matter whether it is medical parts, adjusted exactly to the patient’s needs, special spare parts which otherwise would have to be shipped around half the globe, or whether it is just some kind of self-designed bling jewellery: with the versatile and cheap devices and materials developed in Vienna, highly complex 3D objects can now be built from a variety of materials with very different mechanical, optical and thermal properties.
Enhanced by Zemanta

Thursday, May 19, 2011

SiGe deal drives Skyworks into embedded wireless

Adds short range wireless and key embedded customers
By Nick Flaherty www.flaherty.co.uk

SiGe Semiconductor has had a chequered few years and has finally succumbed, being bought by up and coming power amplifier supplier Skyworks in a deal worth up to $275m.
The acquisition of SiGe complements Skyworks’ wide area front-end solutions by adding SiGe’s innovative short range, silicon-based products. As a result, Skyworks will be able to offer customers a comprehensive wireless networking product portfolio, supporting all key operating frequencies with architectural flexibility to address a variety of high growth applications including smart phones, tablets, gaming consoles, notebook PCs and home automation systems. Key SiGe customers include Cisco, Dell, Huawei, Hewlett-Packard, NetGear, Itron, Microsoft, Nintendo, Samsung and Sony.
“Skyworks’ acquisition of SiGe Semiconductor underscores our commitment to capitalize on ubiquitous wireless connectivity,” said David J. Aldrich, president and CEO of Skyworks. “To that end, this acquisition is highly complementary in terms of our addressed markets, sales channels, process technologies, design methodologies and baseband partnerships. At the same time, the SiGe business presents significant operational and cost synergies yielding immediate earnings accretion and long-term shareholder value creation.”
“Skyworks clearly represents the best strategic and cultural fit for SiGe Semiconductor,” said Sohail Khan, president and chief executive officer of SiGe Semiconductor. “Both companies have a long history of front-end innovation and a shared vision of the future of band-intensive wireless networking. Together, we can develop and deliver products of unprecedented integration and improve our customers’ performance in the increasingly connected wireless world.”
Skyworks will pay $210 million in cash, plus an additional $65 million if certain performance targets are met over the next 12 months.
Enhanced by Zemanta

Toshiba to buy Landis+Gyr to move into smart grid

$2.3bn deal to build smart grid leader
By Nick Flaherty www.flaherty.co.uk

Toshiba is to buy Landis+Gyr for $2.3bn to build the world leader in Smart Grid technology.

The acquisition is designed to create a new platform within Toshiba specifically targeting the global Smart Grid opportunity for both utility customers and consumers. Landis+Gyr has over 8,000 utility customers around teh world and has been pioneering smart metering, networking and service products.
“We welcome Landis+Gyr, the world leader in smart metering products and services, to the Toshiba family” said Hideo Kitamura, Toshiba’s Corporate Executive Vice President . “Our intent is to become a global leader in the Smart Community business by 2020. Together with Landis+Gyr, we will accelerate the development of our combined product and service portfolio to empower utilities and their end customers and to provide sophisticated Smart Community solutions in the global market.”
Toshiba says it will retain and enhance the globally respected Landis+Gyr brand, and continue to meet and exceed customer requirements worldwide. There are no plans for job reduction or restructuring as a result of this transaction.
“Over the past 10 years we have built the world leader in smart metering,” said Landis+Gyr CEO Andreas Umbach. “As a growth platform for Toshiba, Landis+Gyr will have the resources and power to complement, and indeed accelerate, our product offering to utilities. With this transaction, Toshiba will now share our vision of helping the world manage energy better”.
‘The shareholders and I are very proud to have come this far in creating a global leader in an essential industry undergoing transformational growth,” said Cameron O’Reilly, the founder of the investment group that has supported the building of Landis+Gyr over the past 9 years. “We are delighted that Toshiba fully shares our vision, and intends to take Landis+Gyr to the next stage in its exciting development”. Major shareholders of the selling Landis+Gyr investor group include interests associated with Allianz Capital Partners, Australian Capital Equity, DLJ Merchant Banking Partners, Dubai International Capital, Marinya Holdings, Sir Douglas Myers, Sir Anthony O’Reilly, Propel Investments, and Sofina.
Enhanced by Zemanta

Wednesday, May 18, 2011

SanDisk buys Pliant for SSD market

By Nick Flaherty www.flaherty.co.uk

Flash chip maker SanDisk has bought solid state disk company Plaint Technology in a $327m deal to catapult the company into the SSD market.
Pliant, whos new CEO started last month, currently sells ultra-high performance enterprise solid state drives based on multi-level cell flash memory and the SAS protocol to meet the performance, data integrity and reliability needs of enterprise storage customers. The company's product roadmap also includes PCIe-based solutions for high-performance compute servers.
"Flash memory is making significant inroads into the enterprise by dramatically increasing application performance and reducing power consumption," said Sanjay Mehrotra, SanDisk president and chief executive officer. "We believe that the combination of Pliant's innovative technology and enterprise-level system expertise with SanDisk's high-quality, large-scale MLC memory production is a winning value proposition for customers. Our advanced flash technology roadmap and flash management capability will complement Pliant's strengths and allow us to lead the way in reliability and performance in the Enterprise SSD market."
"Pliant has had initial success in the enterprise SAS SSD market, which is that company's sole focus," said Jim Handy at Objective Analysis. "The enterprise SSD market is the fastest-growing SSD market and is one that SanDisk has not targeted so far - SanDisk has dedicated the majority of its SSD efforts to the client PC SSD market, a market that has not materialized to the extent expected by its advocates for the past several years. Most PC buyers still don't want an SSD enough to pay the high price for the amount of storage they get."
"Through this acquisition SanDisk can suddenly jump into the enterprise SSD market at full speed with a device that is already production qualified and with established relationships and design wins with key customers in that market," he said.
"The Enterprise SSD market is poised for considerable growth, with revenue projected to reach $4.2 billion in 2015, up from $994 million in 2010," according to Joseph Unsworth, research director at Gartner. "This trajectory is fueled by the expanding use of MLC NAND technology, which will require extensive flash management expertise to ensure successful adoption in enterprise applications."
"Something striking about this deal is the absence of overlap between the two companies," said Handy. "In design, SanDisk has great strengths in NAND flash and NAND controllers, SATA, USB, and flash card interfaces. Pliant has some flash controller expertise, but also brings significant strengths that SanDisk lacks in SAS interface technology, high-speed SSD data management, and end-to-end data protection."
"SanDisk's sales & marketing strengths include retail sales and OEM sales to cell phone and tablet PC makers," he added. "Pliant's sales and marketing efforts are narrowly focused on enterprise server makers and storage array OEMs. In short, there seems to be a near-ideal lack of redundancies that is rare in companies that bring synergies to the market."




Enhanced by Zemanta

AMC launches compact Atom embedded PC

 Only 1U in height and 120mm square

By Nick Flaherty www.flaherty.co.uk

Advanced Modular Computers has introduced two new highly-compact industrial computers targeted at industrial thin-client applications or distributed processing nodes such as those found in production lines. The small form factor and rugged construction is ideal for mounting within existing equipment or in inaccessible locations. This is aided by a very flexible set of fixing options, such as VESA 75, VESA 100 and wall-mount. as well as wireless, 4 x USB ports, 2 x serial ports and GB Ethernet.

A Compact Flash socket and two SD slots for storage extension provides all the memory capacity needed for an embedded application.

Key Features:

• Atom CPU at 1.1GHz
• Dual Internal SD card slot
• 1GB On-board memory
• MPEG2, WMV9/VC1 Graphics
• 5 Volt Only Power required
• VESA 75 Mountable
• Integrated Audio
• Gigabit Ethernet
• Wireless option
• Rugged metal construction
• Only 10W power consumption

Contact AMC for details

Tuesday, May 17, 2011

New MRAM plant for Russia

Joint venture with Crocus of the US
By Nick Flaherty www.flaherty.co.uk

Crocus Technology, a US developer of MRAM technology is teaming up with the RUSNANO Russian nano-technology investment fund to start a new manufacturing joint venture with a combined investment totaling $300 million. Under the agreement, Crocus and RUSNANO will form Crocus Nano Electronics (CNE), to build an advanced MRAM facility in Russia, capable of manufacturing medium to high density MRAM products based on Crocus' Thermally Assisted Switching (TAS) MRAM technology at 90nm and 65nm lithographies.
Approximately $125 million will be invested in the first year for setting up CNE's MRAM facility in Russia. In addition, RUSNANO along with Crocus' existing investors CDC Innovation, Ventech, IDInvest Partners, NanoDimension, and Sofinnova Ventures will make an equity investment of $55 million into Crocus. An additional $120 million is slated to be deployed in subsequent years to increase production capability of the MRAM facility. Further investment to support upgrades to 45nm and finer lithographic processing is also incorporated into this agreement.
However, this is nowhere near enough cash for a 65nm plant, let alone a 45nm operation. While there may be facilities available for such a plant, the equipment cost is going to limit the production volume at this investment level.
The Russia-based CNE facility will use Crocus' technology to create the first dedicated magnetic memory wafer fab in the world capable of high volume manufacturing of MRAM devices on 300mm wafers with 90nm and 65nm feature sizes. The factory will be designed to add MRAM specific processing layers to standard CMOS foundry wafers. The production facility is scheduled to be in operation within two years and will be capable of producing up to 500 wafers per week. 
Expanded capacity of up to 1000 wafers per week is anticipated under a second phase of investment. In addition, CNE and Crocus plan to create a Learning Centre and a Development Ecosystem for advanced memory design and production in the Russian Federation. Crocus will invest over $5 million initially into Russian research organizations to develop advanced manufacturing solutions. This research investment will expand over time to include system-on-chip (SOC) capabilities for secure memory, network processing, and advanced computing.
"RUSNANO's investment reflects their commitment to breaking down international divides to stimulate the global nano-technology industry," said Bertrand F. Cambou, executive chairman of Crocus Technology. "We are pleased that RUSNANO has chosen to invest in Crocus' technology and is actively participating in building a unique Russian-based manufacturing facility that will serve a global market."
"We selected Crocus because we believe their technology is best-in-class and promises to bring differentiated MRAM products to market", said Anatoly Chubais, CEO and chairman of the Executive Board of RUSNANO, which started life in March and is 100% owned by the Russian Federation. It has already made $5.9bn of investments. "Crocus' executive team has a rich history of cooperation with Russian researchers. CNE and Crocus will be important elements of RUSNANO's strategy for establishing the microelectronics industry in Russia based on the world's best technology."
CNE's 90nm & 65nm manufacturing capability will enable Crocus to offer much higher density MRAM devices than currently available. Products manufactured by CNE will be marketed and sold worldwide by Crocus, excluding Russia and other former CIS states, while CNE will market directly within the former CIS. Crocus products sourced by CNE will address key markets such as storage, mobile communications, networking and cloud computing. In addition to general purpose memory applications, Crocus' TAS MRAM technology will serve specific uses in smartcards, network processing, biometric authentication, near-field communications (NFC), and secure memory. The unlimited endurance, non-volatility, and fast read/write performance of Crocus' MRAM technology are extremely valuable for many of these applications. Crocus' technology will be available for use in both standalone and embedded applications, addressing a total market opportunity of more than$40 billion per year.
The CNE joint venture will be complementary to Crocus' previously announced wafer foundry partnership with TowerJazz, which has successfully entered the final qualification stage, with production ramp of 130nm MRAM devices planned for late 2011. In addition, Crocus will continue to work with SVTC, its process integration R&D partner in San Jose, CA, to develop key manufacturing process steps to be used by CNE
Enhanced by Zemanta

Silicon Image sets up new 60GHz wireless division after SiBeam acquisition

By Nick Flaherty www.flaherty.co.uk

Multimedia chip designer Silicon Image is setting up a wireless division following the $25m acquisition of 60GHz chip pioneer SiBeam.
“The SiBEAM acquisition supports our long-term growth strategy to offer a full range of HD connectivity options based on wired and wireless industry standards,” said Camillo Martino, chief executive officer of Silicon Image, Inc. “SiBEAM’s 60GHz Radio Frequency (RF) technology complements our HD connectivity portfolio by adding WirelessHD-compliant semiconductor products that deliver the highest throughput of any mass market wireless solution available today.”
As a result of the acquisition, Silicon Image’s headcount will increase by approximately 50 people to a total worldwide headcount of approximately 500 employees. SiBEAM’s high-speed wireless communication products will be integrated into Silicon Image’s newly formed Wireless Division, headed by John LeMoncheck, former president and chief executive officer of SiBEAM and Silicon Image’s new vice president and general manager, Wireless Division, reporting to Martino.
“We are excited to be part of the Silicon Image team and are looking forward to delivering a world class wireless product portfolio that combines the strengths of SiBEAM’s 60GHz technology with Silicon Image’s leadership in HD connectivity products,” said LeMoncheck.
Enhanced by Zemanta

New solar product claims capture of up to 95 percent of light energy

Consumer production in five years
By Nick Flaherty www.flaherty.co.uk


A University of Missouri engineer has developed a flexible solar sheet that captures more than 90 percent of available light, and he plans to make prototypes available to consumers within the next five years.
Patrick Pinhero, an associate professor in the MU Chemical Engineering Department, says energy generated using traditional photovoltaic (PV) methods of solar collection is inefficient at around 20% and neglects much of the available solar electromagnetic (sunlight) spectrum. 
The device his team has developed is essentially a thin, moldable sheet of small antennas called nantenna that can harvest the heat from industrial processes and convert it into usable electricity. Their ambition is to extend this concept to a direct solar facing nantenna device capable of collecting solar irradiation in the near infrared and optical regions of the solar spectrum.
Working with his former team at the Idaho National Laboratory and Garrett Moddel, an electrical engineering professor at the University of Colorado, Pinhero and his team have now developed a way to extract electricity from the collected heat and sunlight using special high-speed electrical circuitry. This team also partners with Dennis Slafer of MicroContinuum in Cambridge, Mass. to port the laboratory bench-scale technologies into manufacturable devices that can be inexpensively mass-produced.
"Our overall goal is to collect and utilize as much solar energy as is theoretically possible and bring it to the commercial market in an inexpensive package that is accessible to everyone," Pinhero said. "If successful, this product will put us orders of magnitudes ahead of the current solar energy technologies we have available to us today."
As part of a rollout plan, the team is securing funding from the U.S. Department of Energy and private investors. The second phase features an energy-harvesting device for existing industrial infrastructure, including heat-process factories and solar farms.
Within five years, the research team believes they will have a product that complements conventional PV solar panels. Because it's a flexible film, Pinhero believes it could be incorporated into roof shingle products, or be custom-made to power vehicles.
Once the funding is secure, Pinhero envisions several commercial product spin-offs, including infrared (IR) detection. These include improved contraband-identifying products for airports and the military, optical computing, and infrared line-of-sight telecommunications.

Samsung sets up European LTE operation in UK

Exclusive organization covering the whole of Europe for mobile broadband equipment

By Nick Flaherty www.flaherty.co.uk

Samsung has set up a specialist organization, the Europe Network Operations (ENO), as a centre of 4G business in Europe. The ENO will be based in Samsung’s European HQ in Chertsey, UK.
In addition, the ENO plans to cooperate with European operators to find the most effective methods to handle mobile data traffic. Tailored to the business plans and local requirements of operators, Samsung will offer relevant, innovative solutions and progress field trials. The ENO will work to enhance LTE expansion in the European market.
Along with strengthening its presence in the region, Samsung aims to increase awareness of its field-proven LTE solution and is introducing its Smart LTE solution. This provides customized solutions which maximize and optimize the capability and usage of operators' existing network resources, reducing the overall cost of investment.
Through the use of intelligent radio resource allocation technology, Samsung’s Smart LTE solution improves the overall network capacity and coverage. The solution also enables high quality voice and data services in dense urban areas and rural environments while reducing the required number of base stations.
Samsung is also planning to extend the use of its multi-standard base station, capable of supporting LTE, Mobile WiMAX, WCDMA, GSM and CDMA within a single platform, reducing costs and saving time for operators migrating networks.
"We believe that ENO will play a pivotal role for Samsung in helping us achieve significant 4G LTE success in Europe, through the introduction of our advanced LTE technologies," said Youngki Kim, Executive Vice President and General Manager of Telecommunication Systems Business of Samsung Electronics. “Building on our 30 years of experience in the telecommunication systems industry, Samsung will prove that it’s the most reliable partner in Europe, as we have done all around the globe."
Based on the wide range of field experience of OFDMA technology, Samsung has successfully won 7 commercial LTE contracts and partnered with more than 30 global operators. Samsung has also established a strong position in the 3GPP (3rd Generation Partnership Project) standardization process. Samsung is one of the most influential network solution providers in the project, chairing three positions and three vice-chair positions across various working groups in the 3GPP. Additionally, Samsung owns more than 25% of total LTE IPR (Intellectual Property Rights) related to OFDMA technology, demonstrating its high levels of innovation in this field.
Enhanced by Zemanta