All the latest quantum computer articles

See the latest stories on quantum computing from eeNews Europe

Sunday, May 29, 2016

Top posts for May sees IoT changes

By Nick Flaherty www.flaherty.co.uk

May saw two new players emerging in the Internet of Things, as well as big players buying up smaller ventures for the same reason. Afero raised a significant round of funding to push a combination of Bluetooth and cellular-enabled gateways to roll out the IoT without WiFi, and that has been the strongest story through the last part of the month. This eclisped the earlier seed round of funding for DevicePilot as it pivoted from its original startup proposal of 1024.io. Microsoft is also looking to play significantly in IOT with the purchase of Solair to add to its Azure IoT offering. Expect more consolidation from other large players as the IoT technology landscape shakes out.

Pages

Wednesday, May 25, 2016

Infrared camera tech used for IoT authentication

By Nick Flaherty www.flaherty.co.uk

InVisage Technologies is using its near-infrared camera technology in a module for authenticating users in the home for the Internet of Things (IoT).

The Spark Authentication Module (SAM) near-infrared (NIR) camera module is powered by the previously announced SparkP2 2-megapixel NIR sensor (shown above). At just 8.0 by 8.0 by 3.1 mm, the SAM module is custom built for authentication systems such as Microsoft Windows Hello. In addition to blocking interference from direct sunlight, SAM enables authentication at a greater distance of beyond 100 centimeters from a tablet, laptop or phone so that users are not constrained to a small space in front of their device. Because it operates deeper into the near-infrared spectrum at the 940-nanometer wavelength, SAM also eliminates any intrusive red glow from LEDs.

SAM is the only system that can deliver 2K resolution in a tiny module while consuming 50 times less system power. Existing NIR cameras operate in conjunction with high wattage LEDs to overcome low CMOS sensitivity and ambient infrared in sunlight. The resulting high power consumption and heat generated by such bright LEDs has made outdoor performance a challenge for mobile face recognition systems that operate with lighter batteries. In contrast, SAM, powered by SparkP2, leverages low-power pulsed LEDs synchronized with an extremely short global shutter exposure, allowing for accurate imaging without battery drain. At 50 times lower power consumption, overall system temperature is also up to 20 degrees cooler.

“For authentication, mobile device makers demand compact modules that produce sharp images enabling smooth user verification with minimal false negatives or false positives, regardless of whether the user is indoors or out,” said Jess Lee, InVisage President and CEO. “It also needs to work within a reasonable range so that users can say ‘Hello’ without having to plant their eye or face just a few centimeters from the screen.”

With a photosensitive layer 10 times thinner than a typical silicon infrared sensor, the SparkP2 sensor powering SAM provides significantly higher quantum efficiency at 35% of infrared light at the 940-nanometer wavelength. This greater sensitivity results in sharper images and an expanded operational radius of beyond 100 centimeters, but it also enables minimal crosstalk in a thinner, 3.1mm module with a 72-degree field of view. Infrared cameras in particular suffer from blur due to high levels of crosstalk, or misdetection of light in nearby pixels. Crosstalk typically limits camera thinness by requiring a minimum distance between the lens and the photosensitive layer, but the SparkP2 lens in the SAM module can be much closer to the sensor without increasing crosstalk and preserving a higher level of sharpness.

SAM and SparkP2 are optimized for authentication systems that operate at 850 nanometers (with a visible red glow) and 940 nanometers (invisible with a tenfold improvement in sun irradiance rjection).

Cortus brings fast crypto to home IoT designs

Microprocessor core developer Cortus has teamed up with Oberon Microsystems in Switzerland to to implement fast encryption technology to secure the Internet of Things in the home.

The highly efficient cryptographic code, a key component of its OberonHAP product, has been ported to a 50MHz Cortus APS3RP 32-bit IP core. The combination of the tiny software memory footprint and minimalist processor core is well suited to secure ASICs in battery-powered home automation devices.

Oberon Microsystems has developed, analysed and optimised the cryptographic code of OberonHAP since 2013 (see below). They have developed – and formally proved - novel algorithm combinations, and have carefully written critical parts in assembly language for high performance. The resulting software is typically three times as fast as a good implementation in C. OberonHAP thus makes secure home automation feasible even on low-power, low-cost 32-bit microcontroller cores for ASICs.



“Home automation is a key application area for Cortus”, says Michael Chapman, CEO and President of Cortus, “So we are delighted to see the first steps completed in making Oberon’s code available for Cortus licensees. With growing connectivity of home devices, security is essential." 

OberonHAP implements a range of cryptographic algorithms for pairing, authentication and encryption such as:

For an integrated circuit with the processor core running at 50 MHz, the cryptographic processing of the SRP algorithm – which is required once in the lifetime of a home automation device – takes less than five seconds. Cryptographic processing during opening of a session between a device and a smartphone takes less than 100 milliseconds. RAM requirements were brought down to a record-low 2.5 KB.

“The combination of Oberon’s optimised cryptographic code and the APS3RP results in very good performance even on low-cost, low power devices”, said Cuno Pfister, managing director of Oberon microsystems AG, “We look forward to further cooperation with Cortus in the area of security for home appliances.”

The APS3RP is an enhanced performance version of the widely-deployed APS3R and provides a single cycle parallel multiplier. It has a Harvard architecture and a 3-stage pipeline. The Cortus family of APS processors offers a wide choice of computational performance and system complexity for embedded SoCs. All cores interface to Cortus’ peripherals including Ethernet 10/100 MAC, USB 2.0 Device and USB 2.0 OTG. They also share the simple vectored interrupt structure which ensures rapid, real time interrupt response, with low software overhead.

The APS toolchain and IDE (for C and C++) is available to licensees free of charge, and can be customised and branded for final customer use. Ports of various RTOSs are available such as FreeRTOS, Micrium μC/OSII, Micrium μC/OSIII and Blunk TargetOS. To date over 900 million devices have been manufactured containing Cortus processor cores.
By Nick Flaherty www.flaherty.co.uk

Monday, May 23, 2016

RadioVerse aims to simplify software defined radio in embedded designs

By Nick Flaherty www.flaherty.co.uk

New ecosystem includes the AD9371 integrated wideband RF transceiver, enabling simple, versatile solutions for wireless infrastructure, aerospace and defense, and instrumentation applications.
Analog Devices (ADI) has launched a technology and design ecosystem to simplify software defined radio implementations at at the circuit, architecture, system and software levels.

RadioVerse provides with integrated transceiver technologies, a robust design environment, and market-specific technical expertise to move their radio designs from concept to creation quickly. The new ecosystem’s transceiver technologies reduce radio size, weight and power (SWaP), while the design environment offers board support packages, software and tools to help customers simplify and accelerate radio development across a range of applications including wireless infrastructure, aerospace and defense electronics, and electronic test and measurement. 

As part of the RadioVerse technology and design ecosystem release, ADI introduced the AD9371, the latest addition to the integrated wideband RF transceiver product series. It is a highly versatile, carrier-grade, system-on-chip radio solution that achieves a wide RF tuning range of 300 MHz to 6 GHz, 100-MHz signal bandwidth, and power consumption of less than 5W under standard operating conditions. It replaces or eliminates as many as 20 discrete radio components and can be used as a common design platform across multiple applications and standards, increasing R&D efficiency and reducing time-to-market of the end product. Other products in the wideband RF transceiver series include the AD9361 and AD9364.

“ADI’s RadioVerse technology and design ecosystem demonstrates our system-level approach to innovation through which we deliver solutions that go beyond silicon to enable designers to get to market faster and reduce their costs,” said Rick Hess, executive vice president, Communications Business Group, Analog Devices. “RadioVerse’s industry-leading radio technology gives our customers a competitive advantage to be innovative for their customers.”

RadioVerse provides integrated RF transceivers, software API, design support packages, robust documentation, access to ADI’s EngineerZone online technical support community, and more. RadioVerse provides integrated wideband RF transceiver evaluation boards that directly connect to an FPGA development platform, allowing customers to perform chip-level performance evaluation and rapid prototyping of complete wireless scenarios using a single hardware platform. The boards are supported by a toolkit that includes HDL, Linux drivers, software API, a GUI, and design files necessary for customers to kick-start their own designs. An exact, verified model of the AD9371 transceiver, enabling advanced simulation and analysis of the transceiver, can be developed by using MATLAB and Simulink. End users can then use the model to configure the transceiver and verify performance, correct problems earlier, and accelerate completion of their RF system design.

The RadioVerse design environment will continue to expand to include third-party design houses, COTS providers and other partners to further enable customers to rapidly deploy their products to market.
The AD9371 integrated wideband RF transceiver is ideal for applications such as wireless communications, aerospace and defense electronics, and electronic test and measurement equipment that require high-performance radios across a wideband frequency range while maintaining industry leading low-power consumption levels. The AD9371 covers a 300-MHz to 6-GHz frequency range and supports receiver and transmit large signal instantaneous bandwidths up to 100 MHz, observation receiver and transmit synthesis bandwidths up to 250 MHz, fully integrated LO and clocking functions, and highly advanced on-chip calibration and correction algorithms. It supports a wide range of standards and applications, and enables customers to reduce component and development costs by reducing their need for multiple design variants. The versatility, ease-of-use, and reduced SWaP of the AD9371 enable designers to deploy radios in an array of applications:

· Small-form-factor, multi-band base stations on buildings, light poles, and office walls

· Long-range, high-definition video links in unmanned aerial vehicles

· Wide bandwidth military satellite communication systems

· Electronic test and measurement equipment supporting testing of multi-mode, multi-band applications.

Pricing and Availability
Part Number
Sample Availability
Production Availability
Price Each in 1,000 Units
Package
AD9371
Now
July 2016
$245
12mm x 12mm, 196-Ball CSP_BGA

Xilinx expands its 16nm UltraScale+ FPGA roadmap for new data centre technology

By Nick Flaherty www.flaherty.co.uk

Xilinx has added new acceleration technologies for the data centre to its 16nm FinFET-based UltraScale+ product roadmap.

The integrated High-Bandwidth Memory (HBM) is combined with the recently announced Cache Coherent Interconnect for Acceleration technology (CCIX). CCIX is initially driven by a group of seven companies to enable an acceleration framework that works with multiple processor architectures. These acceleration enhanced technologies will enable efficient heterogeneous computing for the most demanding data center workloads. The new products will also be highly leveraged in many other compute intensive applications requiring high memory bandwidth.

CCIX is backed by AMD, ARM, Huawei, IBM, Mellanox and Qualcomm alongside Xilinx to provide a high-performance open acceleration framework to data centers. For the first time in the industry, a single interconnect technology specification will ensure that processors using different instruction set architectures (ISA) can coherently share data with accelerators and enable efficient heterogeneous computing – significantly improving compute efficiency for servers running data center workloads.

Applications such as big data analytics, search, machine learning, NFV, wireless 4G/5G, in-memory database processing, video analytics, and network processing, benefit from acceleration engines that need to move data seamlessly among the various system components. CCIX will allow these components to access and process data irrespective of where it resides, without the need for complex programming environments. This will enable both off-load and bump-in-the-wire inline application acceleration while leveraging existing server ecosystems and form factors, thereby lowering software barriers and improving total cost of ownership (TCO) of accelerated systems.

“AMD strongly supports development of open standards to make heterogeneous computing more pervasive,” said Gerry Talbot, AMD corporate fellow and vice president of I/O and circuit technologies. “By joining with others in the industry to develop new interconnect specifications to accelerate performance, AMD continues its commitment to open, heterogeneous computing.”

“A ‘one size fits all architecture’ approach to data center workloads does not deliver the required performance and efficiency,” said Lakshmi Mandyam, director server systems and ecosystems, ARM. “CCIX enables more optimized solutions by simplifying software development and deployment of applications that benefit from specialized processing and hardware off-load, delivering higher performance and value to data center customers.”

"IBM Power Systems have recently demonstrated a total commitment to openness as a catalyst for industry innovation, creating benefits in cost and performance to clients in a post-Moore's Law era," said Brad McCredie, IBM Fellow and Vice President of POWER Development. "IBM is committed to working with like-minded industry leaders to expand our efforts around open coherency to help meet our clients' growing cognitive needs."

Built on the TSMCs proven CoWoS process, the HBM-enabled FPGAs will improve acceleration capabilities by offering 10X higher memory bandwidth relative to discrete memory channels for the lowest possible latency. The CCIX technology promotes efficient heterogeneous computing by allowing processors with different instruction-set architectures to coherently share data with accelerators such as the HBM-enabled FPGAs.

“Having already delivered 19 billion transistors on a chip at 20nm leveraging our second generation 3D IC technology, we are creating a third generation 3D IC breakthrough for data center acceleration and other compute intensive designs,” said Victor Peng, executive vice president and general manager, Programmable Products at Xilinx. “When combined with next generation CCIX acceleration framework and our software defined SDAccel development environment, this technology will enable a new breed of high-density, flexible platforms for accelerating compute, storage and networking applications.”

“CCIX enables greater performance and connectivity capabilities over existing interconnects, and actually paves the road to the next generation CPU – Accelerator – Network standard interface,” said Gilad Shainer, vice president of Marketing at Mellanox. “With an anticipated broad eco-system support of the CCIX standard, data centers will now be able to optimize their data usage, thereby achieving world-leading applications efficiency and scale.”

“Qualcomm Technologies is excited about the development of a new technology enabling efficient, high-performance architectures in an open, ISA-agnostic platform,” said Vinay Ravuri, vice president of product management, Qualcomm Technologies, Inc. “The data center of the future demands open architectures enabling choice of compute, acceleration and interconnect technologies, and this is a significant step forward in delivering on that goal.”

“CCIX will leverage existing server interconnect infrastructure and deliver higher bandwidth, lower latency, and cache coherent access to shared memory,” said Gaurav Singh, vice president of Architecture at Xilinx. “This will result in a significant improvement in the usability of accelerators and overall performance and efficiency of data center platforms.”
Xilinx is already collaborating with leading hyperscale data center customers to create optimized configurations and products.

Sunday, May 22, 2016

Robotics drives Qualcomm's European Innovation Fellowship Programme

By Nick Flaherty www.flaherty.co.uk

Qualcomm Technologies has announced the winners of its Europe Qualcomm Innovation Fellowship (QInF) that focuses on recognising, rewarding, and mentoring the most innovative engineering PhD students across Europe and the United States.

Elias Mueggler from ETH Zurich and University of Zurich, Tim de Bruin from TU Delft and Jason Lee from ETH Zurich have been selected as the winning students for their proposals, all around robotics. Each winning student will receive $40,000 as part of the fellowship along with mentoring by a Qualcomm researcher.

“This year’s proposals focused on hot topic areas of research including, computer vision, machine learning, and autonomous navigation,” said Peter Rauber, Senior Director of Engineering at Qualcomm International. “Qualcomm’s culture is about invention, and collaboration to encourage the advancement of new technologies that can make a tremendous impact on the future of mobile. QInF helps us support external innovation by working with top PhD students from elite universities across Europe to mentor them and help propel their ideas forward:”

  • Elias Mueggler's proposal “Event-based Vision for High-Speed Robotics” focuses on investigating how to use event-based cameras in autonomously moving robots such as drones. The work will be an important first step towards bringing microsecond-resolution image processing to fast moving mobile robots. Elias will work on creating a generic six-degrees-of-freedom SLAM system with event based cameras which will advance the state of the art.
  • Tim de Bruin's proposal “Unsupervised Multimodal State-representation Learning for Robotics" which combines reinforcement- and deep learning to make robots learn a uniform representation of their state and their environment to learn new tasks autonomously. Tim will investigate learning control policies in high dimensional state spaces which still adhere to physical rules. This project will look to improve autonomous learning for robots.
  • Jason Lee proposes “A Unified Neural Language Model for Morphology, Grammar and Coherence” to bring together the benefits of character-level and sentence-level language models. Jason will model morphology, grammar and coherence jointly with a single neural network-based model. The model will incorporate past sentences and words to predict the next word. Having no pre-defined linguistic rules to start from, the project will improve language-agnostic natural language processing.
The QInF Europe program continues to expand its reach with the addition of two new universities: for the first time this year, the Technical University Delft (Netherlands) and KU Leuven (Belgium) were invited to participate in the program, bringing the total number of participating universities to six.

“This was the first year that we consolidated the Europe program and brought all of the region finalists together to present their proposals to a panel of technology topic expert judges who determined the winning proposals. It was great to have the different European universities together to meet and discuss their research,” said Charles Bergan, Vice President of Engineering at Qualcomm Technologies, Inc. “The high caliber of innovative proposals we received again this year for QInF Europe made the selection process quite difficult. In the end, we chose Elias, Jason, and Tim for their innovative work. We congratulate them and look forward to collaborating closely to bring their ideas to life.”

Charles participated for a fifth time in this year’s QInF Europe judging panel, along with the head of Qualcomm’s European research offices, Peter Rauber, and several Qualcomm Europe researchers. The QInF Europe finalist event was hosted by QUVA, the joint research lab, announced by Qualcomm Technologies. Inc. and the University of Amsterdam, focused on advancing state-of-the-art machine learning techniques for computer vision. Prof. Arnold Smeulders, one of the three QUVA directors, provided an interesting keynote speech on the open challenges in tracking.”

For more information about QInF, please visit www.qualcomm.com/research/university-relations/innovation-fellowship

Shakeup in the top 20 semiconductor suppliers continues in 2016

By Nick Flaherty www.flaherty.co.uk

Apple's internal chip value puts it at #15

Sales at the top 20 semiconductor companies declined by 6% in the first quarter of this year as the impact of consolidation and the downturn starts to bite. 

The figures from IC Insights show that seven companies displayed a double-digit 1Q16/1Q15 decline and three that registered a dramatic 25% fall (with memory giants Micron and SK Hynix posting the worst results). Half of the top-20 companies had sales of at least $2.0 billion in 1Q16, so it takes $832 million in quarterly sales just to make it into the top 20 list.


Apple is an anomaly in the top-20 ranking with regards to major semiconductor suppliers. The company designs and uses its processors only in its own products—there are no sales of the company’s MPUs to other system makers. Apple’s custom ARM-based SoC processors had a “sales value” of $1,390 million in 1Q16, up 10% from $1,260 million in 1Q15. 

 Apple’s MPUs have been used in 13 iPhone handset designs since 2007 and a dozen iPad tablet models since 2010 as well as in iPod portable media players, smartwatches, and Apple TV units. Apple’s custom processors—such as the 64-bit A9 used in iPhone 6s and 6s Plus handsets introduced in September 2015 and the new iPhone 6SE launched in March 2016—are made by pure-play foundry TSMC and IDM foundry Samsung.

There were some surprises though - despite the doom and gloom around the prospects for growth at Intel, the company still saw significant growth against the declining backdrop. Growth star MediaTek continued to advance, but Infineon also saw healthy growth. In terms of rankings, the biggest moves in the ranking were made by the new Broadcom (Avago/Broadcom) and Nvidia, each of which jumped up three positions in 1Q16 as compared to 1Q15.

There was one new entrant into the top-20 ranking in the first quarter US fabless supplier AMD. AMD had a particularly rough 1Q16 and saw its sales drop 19% year-over-year to $832 million, which was about half the $1,589 million in sales the company logged just over two years ago in 4Q13. Although AMD did not have a good 1Q16, Japan-based Sharp, the only company that fell from the top-20 ranking, faired even worse with its 1Q16/1Q15 sales plunging by 30%

In order to allow for more useful year-over-year comparisons, IC Insights combined the acquired/merged semiconductor company sales results for both 1Q15 and 1Q16, regardless of when the acquisition or merger occurred. For example, although Intel’s acquisition of Altera did not close until late December of 2015, Altera’s 1Q15 sales ($435 million) were added to Intel’s 1Q15 sales ($11,632 million) to come up with the $12,067 million shown in the chart aboe. The same method was used to calculate the 1Q15 sales for Broadcom (Avago/Broadcom), NXP (NXP/Freescale), and GlobalFoundries (GlobalFoundries/IBM).

As would be expected, given the possible acquisitions and mergers over this years such as Microchip/Atmel and ON Semiconductor/Fairchild, as well as any new ones that may develop, the top-20 semiconductor ranking is likely to undergo a significant amount of upheaval over the next few years as the semiconductor industry continues along its path to maturity.

Friday, May 20, 2016

Google uses Infineon 60GHz radar for gesture interface

By Nick Flaherty www.flaherty.co.uk

Two prototypes of products controlled exclusively through gestures via 60GHz radar have been demonstrated at the Google I/O conference in the US. Both devices - a smartwatch and a wireless speaker - can recognize gestures that replace switches or buttons. 

“Gesture sensing offers a new opportunity to revolutionize the human-machine interface by enabling mobile and fixed devices with a third dimension of interaction,” said Ivan Poupyrev, Technical Project Lead at Google ATAP. “This will fill the existing gap with a convenient alternative for touch- and voice controlled interaction.” 

Infineon and Google ATAP aim at addressing numerous markets with the “Soli” radar technology. Among these are home entertainment, mobile devices and the Internet of Things (IoT). Radar chips from Infineon as well as Google ATAP’s software and interaction concepts form the basis. Both companies are preparing for the joint commercialization of the “Soli” technology. “Sophisticated haptic algorithms combined with highly integrated and miniaturized radar chips can foster a huge variety of applications,” said Andreas Urschitz, President of the Power Management & Multimarket at Infineon,

In addition of their efforts in the audio and smartwatch markets, the developers’ ambitions are more comprehensive: “It is our target to create a new market standard with compelling performance and new user experience, creating a core technology for enablement of augmented reality and IoT,” said Urschitz. "While Virtual Reality technologies could already visualize new realities in the past, users could not interact with these so far. The 60 GHz radar application developed by Google and Infineon bridges the gap, as a key technology enabling Augmented Reality."