All the latest quantum computer articles

See the latest stories on quantum computing from eeNews Europe

Monday, May 23, 2011

Digilent opens up Arduino with 32bit Microchip development boards

Dev Boards and Open-Source Software for protoyping and teaching

By Nick Flaherty www.flaherty.co.uk

Digilent has launched a development board for the popular open source Arduino microcontroller technology based around a 32bit chip from Microchip, reducing the cost of the boards and the end system.
This will open up more opportunities for prototyping, teaching in universities and hobbyists as well as other non-electronics applications. The recent USB typewriter (below), for example, was based on the Arduino platform.

Designed and manufactured by Digilent, the chipKIT platform enables hobbyists and academics to easily and cheaply integrate electronics into their projects, even if they do not have an electronic-engineering background. The platform consists of two PIC32-based development boards and open-source software that is compatible with the Arduino programming language and development environment, thanks to the work done by Mark Sproul and Rick Anderson through Fair Use Building and Research Labs. 
A key point is that the 32bit chipKIT hardware is compatible with existing 3.3V Arduino shields and applications, and can be developed using a modified version of the Arduino IDE and existing Arduino resources, such as code examples, libraries, references and tutorials. This means existing code can be easily dropped into the development system, with boards at $27 and $50.



The chipKIT boards use a PIC32 MIPS M4K processor running at 80MHz with up to 512KB Flash and 128KB RAM, as well as Ethernet, CAN, and USB (Full-Speed Host, Device and OTG); plus peripherals such as multiple timers, a 16-channel 1 MSPS Analogue-to-Digital Converter (ADC), two comparators, and multiple I2C, SPI, and UART interfaces. 
At the same time the Arduino programming environment has been modified and extended so that it supports the PIC32-based chipKIT boards, as well as traditional Arduino boards. The Arduino standard libraries have been also been modified to support chipKIT boards and traditional Arduino boards. All of this work has been contributed back to the open-source Arduino community. Aside from a small number of shields that require 5V operation, many existing Arduino hardware and software sketches are compatible with the chipKIT platform, without modification.
“Students, educators and hobbyists, with or without electronic-engineering backgrounds, are looking for inexpensive solutions that will enable them to easily integrate electronics into their projects,” said Derek Carlson, Microchip’s vice president of Development Systems. “The chipKIT boards and software meet these needs, providing far more features, performance and functionality than any other Arduino solution on the market, at a low cost.”
“The chipKIT platform is the first and only 32-bit solution of its kind in the industry,” said Clint Cole, president of Digilent. "Academics and hobbyists can plug the boards into their design, download the open-source software and have their project up and running in minutes.”
The chipKIT Uno32 (part # TDGL002) development board is a clone of the Arduino Uno board, and features 128 KB Flash program memory and 16 KB RAM, with two each of the I2C, SPI and UART peripherals. This board is priced at $26.95 each. 
 A clone of the Arduino Mega board, the chipKIT Max32 (part # TDGL003) development board features 512 KB Flash program memory and 128 KB RAM, with USB, CAN and Ethernet communication, as well as 5 each I2C, 4 each SPI, and 6 each UART peripherals. The chipKIT Max32 board is priced at $49.50 each. Both chipKIT boards can be ordered today, at http://www.microchip.com/get/TDD2. Additionally, the open-source software for both boards is available today at http://www.microchip.com/get/TDD2. chipKIT Network and I/O Shields are expected to be available in June 2011.
Enhanced by Zemanta

Freescale moves Coldfire microcontrollers to 90nm with added mixed signal

FlexMemory and ultra-low power consumption for consumer and industrial applications on next generation devices
By Nick Flaherty www.flaherty.co.uk

In a move that will be welcomed by many embedded system designers, Freescale has ported its Coldfire architecture to 90nm and added more mixed signal capability to give higher integration and lower power consumption. 
Built on 90nm thin film storage flash technology with FlexMemory, the ColdFire+ MCF51Qx and MCF51Jx microcontroller (MCU) families are built upon Freescale’s strong heritage of 32-bit MCU development and the new families are the next step in the evolution of ColdFire architecture says the company. The ColdFire+ Qx and Jx families bring new features to the ColdFire portfolio, including FlexMemory, configurable embedded electrically erasable programmable read-only memory (EEPROM), highly-accurate mixed-signal capability, low-power features and additional application-specific peripherals for consumer devices.
“We developed the new ColdFire+ MCUs to help our customers achieve their design goals calling for smaller, low-power and cost-effective MCUs,” said Jeff Bock, director of marketing for Freescale’s Industrial and Multimarket MCU business. “With more than 40 new products under the ColdFire+ umbrella and a comprehensive set of design and enablement tools, we’re giving our customers what they need to create the next generation of energy-efficient industrial and consumer devices.”
The ColdFire+ Qx and Jx product families are aimed at industrial applications like building control (HVAC and light automation) and portable medical devices, as well as portable consumer devices. Capabilities include encryption and security, USB audio, capacitive touch interfaces and display technology. ColdFire+ MCUs can provide these functions while helping to provide optimal battery life and reduced size and cost.
ColdFire+ MCUs also offers a touch sensing module, which, when combined with Freescale’s recently introduced Xtrinsic Touch-Sensing Software, simplifies touch key configuration by allowing multiple electrode array combinations and provides designers a full-scale, highly accurate and robust touch sensing solution.

ColdFire+ MCF51Qx and MCF51Jx families
The ColdFire+ portfolio includes the MCF51JF, MCF51JU, MCF51QM, MCF51QF, MCF51QH and MCF51QU families. These families are pin- and software-compatible and feature:

• Innovative FlexMemory, configurable EEPROM
• 10 flexible ultra-low-power modes
• 16-bit ADC and 12-bit DAC, providing flexible and powerful mixed-signal capability
• Cryptographic acceleration unit and random number generator for secure communication
• Integrated capacitive touch sensing and display support
• Jx only: integrated USB 2.0 full-speed device/host/OTG controller, supporting connection and battery charging via USB
• Jx only: serial audio interface, providing direct interface to codecs and inter-IC sound (I2S) audio devices
• Package sizes as small as 5x5 mm for space-constrained applications

The software bundle features Freescale’s complimentary MQX real time operating system (RTOS) with USB audio, mass storage, human interface device and class stacks that help simplify hardware management and streamline software development. Also included is CodeWarrior Development Studio, a comprehensive integrated development environment with MQX RTOS kernel awareness for advanced debug support that is based on the Eclipse open development platform, providing a visual and automated framework to accelerate the development of complex embedded applications. In addition, Freescale’s Tower System, a modular development platform, potentially saves months of development time through rapid prototyping and tool re-use. 
Enhanced by Zemanta

Antenova launches complete surface mount GPS system

Puts u-blox GPS and antenna in a Surface Mount Device with Easy External Matching

By Nick Flaherty www.flaherty.co.uk

Cambridge antenna developer Antenova  has developed a surface mount GPS Radio Antenna Module taht combines the u-blox 6 GPS chipset with Antenova’s high performing GPS antenna for embedded GPS, machine-to-machine (M2M) and mobile device manufacturers. The M10382 uses Antenova's latest Laser Direct Structuring (LDS) technology in a compact low profile package to give a complete GPS system solution in a compact surface mountable device with novel external matching which offers ease of tuning for each device platform.
"The M10382 is the result of customer demand for a smaller, low cost and surface mountable GPS radio antenna module for the exploding embedded GPS and connected device markets,” said Greg McCray, CEO of Antenova. ”The M10382 incorporates the u-blox 6 GPS engine with Antenova’s high performing GPS antenna technology and is the latest addition to our industry leading range of GPS RADIONOVA radio antenna modules. Antenova’s GPS RADIONOVA modules have been designed from inception to deliver a high performing drop-in system solution that will work with a range of GPS receiver chips. This flexibility enables us to continually provide customers with a complete RF antenna module with the GPS receiver option of their choice and one that is best suited for their device applications.”
The M10382 is a highly integrated GPS RF antenna module suitable for L1-band GPS and A-GPS systems. The device combines the u-blox 6 UBX-G6010-ST GPS receiver IC with Antenova’s high efficiency GPS antenna. All front-end and receiver components are contained in a small 24.2 x 9.9 x 3.9 mm3 surface mountable device providing a complete GPS receiver for optimum performance. M10382 operates on a single 1.8V or 3.3V positive supply with low power consumption and several low power modes for further power savings. An accurate 0.5ppm TCXO and very low noise LNA ensures high sensitivity and short time-to-first-fix (TTFF). The M10382 is supported by u-blox stand alone software and is compatible with UART, SPI, DDC, I2C and USB host processor interfaces. M10382 also benefits from Antenova’s patented external matching that ensures easy tuning for each platform.
Enhanced by Zemanta

Saturday, May 21, 2011

NXP demonstrates new 'car-to-anything' IEEE802.11p comms platform

Car-to-x (C2X) communication on a public road in Holland
By Nick Flaherty www.flaherty.co.uk

Dutch chip maker NXP Semiconductors has demonstrated car-to-x (C2X) communication on a public road in the Netherlands. With this demo, NXP is the first semiconductor company to take the step from showing concepts to actually demonstrating an automotive-ready hardware platform for connected mobility. 
NXP has co-developed the C2X platform with Australian-based Cohda Wireless to combine telematics for location-based services and networking security so that the car can communicate with kerb-side and wide area systems and other cars.
The C2X communication uses the IEEE802.11p wireless standard designed specifically for automotive applications. This allows cars to communicate with each other (car-to-car) as well as with intelligent traffic infrastructure (car-to-infrastructure) around them. The C2X platform from NXP and Cohda picks up information from other cars and static traffic systems so that drivers receive early warnings of cars hidden from sight behind trucks or approaching from around corners. Other use cases are warnings about emergency vehicles and traffic jams, or traffic light signals allowing drivers to adjust their speed and optimize driving.
The C2X platform is able to meet the requirements of the automotive industry: reliable signal reception for fast-moving objects even in difficult surroundings, cost-efficient design, and flexible programming. It uses Cohda’s 802.11p patented radio reception algorithms and is based on NXP’s multi-standard radio reception platform.
NXP is project leader of the Dutch SPITS research project (SPITS: Strategic Platform for Intelligent Transport Systems) and  is also demonstrating intelligent traffic data analysis from the in-vehicle networks, as well as emergency and breakdown calls based on NXP’s telematics module, ATOP.
“Connecting the car to the environment demands in-depth expertise in secure connectivity, Software-Defined Radio architectures, and telematics," said Kurt Sievers, senior vice president and general manager of the Automotive business at NXP Semiconductors. "The SPITS project has been extremely valuable for us as it brought experts and research partners from all parts of the value chain together all working towards the same goal: efficient and sustainable mobility solutions.”

www.nxp.com/spits

About SPITS project

The Strategic Platform for Intelligent Transport Systems (SPITS) project has three main areas: traffic management and safety, concepts for open in-car platform, and downloadable services. SPITS was aimed at creating an open and affordable intelligent transport system platform, which is scalable, secure and real-time. The Dutch Ministry of Economic Affairs has subsidised the project. The consortium is lead by NXP Semiconductors and consists of eight companies (NXP, TomTom, TNO, Logica, Catena, Task24, Foutress, GreenCat), one research institute, and four universities. 
The SPITS system comprises the vehicle on-board unit (OBU), the Road Side Unit (RSU) infrastructure, and the Back Office (BO) service centre. Communications between these elements is a major part of the Strategic Platform. After the SPITS project officially ends, consortium members will continue to refine the SPITS results for commercial use across Europe and beyond. These projects represent an investment by the Government to retain key knowledge from R&D companies within the Netherlands, following the economic crisis.
Enhanced by Zemanta

Friday, May 20, 2011

World's smallest 3D printer

LED printer at just 1200 euros
By Nick Flaherty www.flaherty.co.uk

A research project at the Vienna University of Technology (TU Vienna) is aiming to could turn futuristic 3D-printers into affordable everyday items.
Printers which can produce three-dimensional objects have been available for years but the project has developed a much smaller, lighter and cheaper version that could be mass produced to brign down the cost. This would allow anyone to produce small, taylor-made 3D-objects at home, using building plans from the internet – and this could save money for expensive custom-built spare parts.
Several scientific fields have to come together to design the 3D-printer. The device was assembled by mechanical engineers in the research group of professor Jürgen Stampfl, but also the chemical research by the team of professor Robert Liska was of crucial importance: first, chemists have to determine which special kinds of synthetic material can be used for printing.
The basic principle of the 3D-printer is quite simple: The desired object is printed in a small tub filled with synthetic resin. The resin has a very special property: It hardens precisely where it is illuminated with intense beams of light. Layer for layer, the synthetic resin is irradiated at exactly the right spots and as one layer hardens, the next layer can be attached to it, until the object is completed in a process called 'additive manufacturing technology'. 
“This way, we can even produce complicated geometrical objects with an intricate inner structure, which could never be made using casting techniques,” said Klaus Stadlmann who developed the prototype together with Markus Hatzenbichler.
This method is not designed for large-scale production of bulk articles – for that, there are cheaper alternatives. The great advantage of additive manufacturing is the fact that is offers the possibility to produce bespoke individually adjusted items. The prototype of the printer is no bigger than a carton of milk, it weighs 1.5 kilograms, and at just 1200 Euros, it was remarkably cheap. “We will continue to reduce the size of the printer, and the price will definitely decrease too, if it is produced in large quantities”, Klaus Stadlmann believes.

LED for Higher Resolution
The individual layers hardened by the light beams are just a twentieth of a millimetre thick. Therefore, the printer can be used for applications which require extraordinary precision – such as construction parts for hearing aids. Unlike previous models, the printer at TU Vienna uses light emitting diodes (LEDs), with which high intensities of light can be obtained at very well-defined positions.
The research group for additive manufacturing technologies at TU Vienna is working with a variety of different 3D-techniques and materials. New materials – such as special ceramics or polymers – are constantly being developed for 3D-printing. 3D objects can now even be made from eco-friendly biodegradable substances. In cooperation with biologists and physicians, the scientists could show that the artificial structures created with their 3D-printer technology are perfectly suited to serve as a scaffold that supports natural growth of bone structure in the body.

Versatility

No matter whether it is medical parts, adjusted exactly to the patient’s needs, special spare parts which otherwise would have to be shipped around half the globe, or whether it is just some kind of self-designed bling jewellery: with the versatile and cheap devices and materials developed in Vienna, highly complex 3D objects can now be built from a variety of materials with very different mechanical, optical and thermal properties.
Enhanced by Zemanta

Thursday, May 19, 2011

SiGe deal drives Skyworks into embedded wireless

Adds short range wireless and key embedded customers
By Nick Flaherty www.flaherty.co.uk

SiGe Semiconductor has had a chequered few years and has finally succumbed, being bought by up and coming power amplifier supplier Skyworks in a deal worth up to $275m.
The acquisition of SiGe complements Skyworks’ wide area front-end solutions by adding SiGe’s innovative short range, silicon-based products. As a result, Skyworks will be able to offer customers a comprehensive wireless networking product portfolio, supporting all key operating frequencies with architectural flexibility to address a variety of high growth applications including smart phones, tablets, gaming consoles, notebook PCs and home automation systems. Key SiGe customers include Cisco, Dell, Huawei, Hewlett-Packard, NetGear, Itron, Microsoft, Nintendo, Samsung and Sony.
“Skyworks’ acquisition of SiGe Semiconductor underscores our commitment to capitalize on ubiquitous wireless connectivity,” said David J. Aldrich, president and CEO of Skyworks. “To that end, this acquisition is highly complementary in terms of our addressed markets, sales channels, process technologies, design methodologies and baseband partnerships. At the same time, the SiGe business presents significant operational and cost synergies yielding immediate earnings accretion and long-term shareholder value creation.”
“Skyworks clearly represents the best strategic and cultural fit for SiGe Semiconductor,” said Sohail Khan, president and chief executive officer of SiGe Semiconductor. “Both companies have a long history of front-end innovation and a shared vision of the future of band-intensive wireless networking. Together, we can develop and deliver products of unprecedented integration and improve our customers’ performance in the increasingly connected wireless world.”
Skyworks will pay $210 million in cash, plus an additional $65 million if certain performance targets are met over the next 12 months.
Enhanced by Zemanta

Toshiba to buy Landis+Gyr to move into smart grid

$2.3bn deal to build smart grid leader
By Nick Flaherty www.flaherty.co.uk

Toshiba is to buy Landis+Gyr for $2.3bn to build the world leader in Smart Grid technology.

The acquisition is designed to create a new platform within Toshiba specifically targeting the global Smart Grid opportunity for both utility customers and consumers. Landis+Gyr has over 8,000 utility customers around teh world and has been pioneering smart metering, networking and service products.
“We welcome Landis+Gyr, the world leader in smart metering products and services, to the Toshiba family” said Hideo Kitamura, Toshiba’s Corporate Executive Vice President . “Our intent is to become a global leader in the Smart Community business by 2020. Together with Landis+Gyr, we will accelerate the development of our combined product and service portfolio to empower utilities and their end customers and to provide sophisticated Smart Community solutions in the global market.”
Toshiba says it will retain and enhance the globally respected Landis+Gyr brand, and continue to meet and exceed customer requirements worldwide. There are no plans for job reduction or restructuring as a result of this transaction.
“Over the past 10 years we have built the world leader in smart metering,” said Landis+Gyr CEO Andreas Umbach. “As a growth platform for Toshiba, Landis+Gyr will have the resources and power to complement, and indeed accelerate, our product offering to utilities. With this transaction, Toshiba will now share our vision of helping the world manage energy better”.
‘The shareholders and I are very proud to have come this far in creating a global leader in an essential industry undergoing transformational growth,” said Cameron O’Reilly, the founder of the investment group that has supported the building of Landis+Gyr over the past 9 years. “We are delighted that Toshiba fully shares our vision, and intends to take Landis+Gyr to the next stage in its exciting development”. Major shareholders of the selling Landis+Gyr investor group include interests associated with Allianz Capital Partners, Australian Capital Equity, DLJ Merchant Banking Partners, Dubai International Capital, Marinya Holdings, Sir Douglas Myers, Sir Anthony O’Reilly, Propel Investments, and Sofina.
Enhanced by Zemanta

Wednesday, May 18, 2011

SanDisk buys Pliant for SSD market

By Nick Flaherty www.flaherty.co.uk

Flash chip maker SanDisk has bought solid state disk company Plaint Technology in a $327m deal to catapult the company into the SSD market.
Pliant, whos new CEO started last month, currently sells ultra-high performance enterprise solid state drives based on multi-level cell flash memory and the SAS protocol to meet the performance, data integrity and reliability needs of enterprise storage customers. The company's product roadmap also includes PCIe-based solutions for high-performance compute servers.
"Flash memory is making significant inroads into the enterprise by dramatically increasing application performance and reducing power consumption," said Sanjay Mehrotra, SanDisk president and chief executive officer. "We believe that the combination of Pliant's innovative technology and enterprise-level system expertise with SanDisk's high-quality, large-scale MLC memory production is a winning value proposition for customers. Our advanced flash technology roadmap and flash management capability will complement Pliant's strengths and allow us to lead the way in reliability and performance in the Enterprise SSD market."
"Pliant has had initial success in the enterprise SAS SSD market, which is that company's sole focus," said Jim Handy at Objective Analysis. "The enterprise SSD market is the fastest-growing SSD market and is one that SanDisk has not targeted so far - SanDisk has dedicated the majority of its SSD efforts to the client PC SSD market, a market that has not materialized to the extent expected by its advocates for the past several years. Most PC buyers still don't want an SSD enough to pay the high price for the amount of storage they get."
"Through this acquisition SanDisk can suddenly jump into the enterprise SSD market at full speed with a device that is already production qualified and with established relationships and design wins with key customers in that market," he said.
"The Enterprise SSD market is poised for considerable growth, with revenue projected to reach $4.2 billion in 2015, up from $994 million in 2010," according to Joseph Unsworth, research director at Gartner. "This trajectory is fueled by the expanding use of MLC NAND technology, which will require extensive flash management expertise to ensure successful adoption in enterprise applications."
"Something striking about this deal is the absence of overlap between the two companies," said Handy. "In design, SanDisk has great strengths in NAND flash and NAND controllers, SATA, USB, and flash card interfaces. Pliant has some flash controller expertise, but also brings significant strengths that SanDisk lacks in SAS interface technology, high-speed SSD data management, and end-to-end data protection."
"SanDisk's sales & marketing strengths include retail sales and OEM sales to cell phone and tablet PC makers," he added. "Pliant's sales and marketing efforts are narrowly focused on enterprise server makers and storage array OEMs. In short, there seems to be a near-ideal lack of redundancies that is rare in companies that bring synergies to the market."




Enhanced by Zemanta

AMC launches compact Atom embedded PC

 Only 1U in height and 120mm square

By Nick Flaherty www.flaherty.co.uk

Advanced Modular Computers has introduced two new highly-compact industrial computers targeted at industrial thin-client applications or distributed processing nodes such as those found in production lines. The small form factor and rugged construction is ideal for mounting within existing equipment or in inaccessible locations. This is aided by a very flexible set of fixing options, such as VESA 75, VESA 100 and wall-mount. as well as wireless, 4 x USB ports, 2 x serial ports and GB Ethernet.

A Compact Flash socket and two SD slots for storage extension provides all the memory capacity needed for an embedded application.

Key Features:

• Atom CPU at 1.1GHz
• Dual Internal SD card slot
• 1GB On-board memory
• MPEG2, WMV9/VC1 Graphics
• 5 Volt Only Power required
• VESA 75 Mountable
• Integrated Audio
• Gigabit Ethernet
• Wireless option
• Rugged metal construction
• Only 10W power consumption

Contact AMC for details

Tuesday, May 17, 2011

New MRAM plant for Russia

Joint venture with Crocus of the US
By Nick Flaherty www.flaherty.co.uk

Crocus Technology, a US developer of MRAM technology is teaming up with the RUSNANO Russian nano-technology investment fund to start a new manufacturing joint venture with a combined investment totaling $300 million. Under the agreement, Crocus and RUSNANO will form Crocus Nano Electronics (CNE), to build an advanced MRAM facility in Russia, capable of manufacturing medium to high density MRAM products based on Crocus' Thermally Assisted Switching (TAS) MRAM technology at 90nm and 65nm lithographies.
Approximately $125 million will be invested in the first year for setting up CNE's MRAM facility in Russia. In addition, RUSNANO along with Crocus' existing investors CDC Innovation, Ventech, IDInvest Partners, NanoDimension, and Sofinnova Ventures will make an equity investment of $55 million into Crocus. An additional $120 million is slated to be deployed in subsequent years to increase production capability of the MRAM facility. Further investment to support upgrades to 45nm and finer lithographic processing is also incorporated into this agreement.
However, this is nowhere near enough cash for a 65nm plant, let alone a 45nm operation. While there may be facilities available for such a plant, the equipment cost is going to limit the production volume at this investment level.
The Russia-based CNE facility will use Crocus' technology to create the first dedicated magnetic memory wafer fab in the world capable of high volume manufacturing of MRAM devices on 300mm wafers with 90nm and 65nm feature sizes. The factory will be designed to add MRAM specific processing layers to standard CMOS foundry wafers. The production facility is scheduled to be in operation within two years and will be capable of producing up to 500 wafers per week. 
Expanded capacity of up to 1000 wafers per week is anticipated under a second phase of investment. In addition, CNE and Crocus plan to create a Learning Centre and a Development Ecosystem for advanced memory design and production in the Russian Federation. Crocus will invest over $5 million initially into Russian research organizations to develop advanced manufacturing solutions. This research investment will expand over time to include system-on-chip (SOC) capabilities for secure memory, network processing, and advanced computing.
"RUSNANO's investment reflects their commitment to breaking down international divides to stimulate the global nano-technology industry," said Bertrand F. Cambou, executive chairman of Crocus Technology. "We are pleased that RUSNANO has chosen to invest in Crocus' technology and is actively participating in building a unique Russian-based manufacturing facility that will serve a global market."
"We selected Crocus because we believe their technology is best-in-class and promises to bring differentiated MRAM products to market", said Anatoly Chubais, CEO and chairman of the Executive Board of RUSNANO, which started life in March and is 100% owned by the Russian Federation. It has already made $5.9bn of investments. "Crocus' executive team has a rich history of cooperation with Russian researchers. CNE and Crocus will be important elements of RUSNANO's strategy for establishing the microelectronics industry in Russia based on the world's best technology."
CNE's 90nm & 65nm manufacturing capability will enable Crocus to offer much higher density MRAM devices than currently available. Products manufactured by CNE will be marketed and sold worldwide by Crocus, excluding Russia and other former CIS states, while CNE will market directly within the former CIS. Crocus products sourced by CNE will address key markets such as storage, mobile communications, networking and cloud computing. In addition to general purpose memory applications, Crocus' TAS MRAM technology will serve specific uses in smartcards, network processing, biometric authentication, near-field communications (NFC), and secure memory. The unlimited endurance, non-volatility, and fast read/write performance of Crocus' MRAM technology are extremely valuable for many of these applications. Crocus' technology will be available for use in both standalone and embedded applications, addressing a total market opportunity of more than$40 billion per year.
The CNE joint venture will be complementary to Crocus' previously announced wafer foundry partnership with TowerJazz, which has successfully entered the final qualification stage, with production ramp of 130nm MRAM devices planned for late 2011. In addition, Crocus will continue to work with SVTC, its process integration R&D partner in San Jose, CA, to develop key manufacturing process steps to be used by CNE
Enhanced by Zemanta

Silicon Image sets up new 60GHz wireless division after SiBeam acquisition

By Nick Flaherty www.flaherty.co.uk

Multimedia chip designer Silicon Image is setting up a wireless division following the $25m acquisition of 60GHz chip pioneer SiBeam.
“The SiBEAM acquisition supports our long-term growth strategy to offer a full range of HD connectivity options based on wired and wireless industry standards,” said Camillo Martino, chief executive officer of Silicon Image, Inc. “SiBEAM’s 60GHz Radio Frequency (RF) technology complements our HD connectivity portfolio by adding WirelessHD-compliant semiconductor products that deliver the highest throughput of any mass market wireless solution available today.”
As a result of the acquisition, Silicon Image’s headcount will increase by approximately 50 people to a total worldwide headcount of approximately 500 employees. SiBEAM’s high-speed wireless communication products will be integrated into Silicon Image’s newly formed Wireless Division, headed by John LeMoncheck, former president and chief executive officer of SiBEAM and Silicon Image’s new vice president and general manager, Wireless Division, reporting to Martino.
“We are excited to be part of the Silicon Image team and are looking forward to delivering a world class wireless product portfolio that combines the strengths of SiBEAM’s 60GHz technology with Silicon Image’s leadership in HD connectivity products,” said LeMoncheck.
Enhanced by Zemanta

New solar product claims capture of up to 95 percent of light energy

Consumer production in five years
By Nick Flaherty www.flaherty.co.uk


A University of Missouri engineer has developed a flexible solar sheet that captures more than 90 percent of available light, and he plans to make prototypes available to consumers within the next five years.
Patrick Pinhero, an associate professor in the MU Chemical Engineering Department, says energy generated using traditional photovoltaic (PV) methods of solar collection is inefficient at around 20% and neglects much of the available solar electromagnetic (sunlight) spectrum. 
The device his team has developed is essentially a thin, moldable sheet of small antennas called nantenna that can harvest the heat from industrial processes and convert it into usable electricity. Their ambition is to extend this concept to a direct solar facing nantenna device capable of collecting solar irradiation in the near infrared and optical regions of the solar spectrum.
Working with his former team at the Idaho National Laboratory and Garrett Moddel, an electrical engineering professor at the University of Colorado, Pinhero and his team have now developed a way to extract electricity from the collected heat and sunlight using special high-speed electrical circuitry. This team also partners with Dennis Slafer of MicroContinuum in Cambridge, Mass. to port the laboratory bench-scale technologies into manufacturable devices that can be inexpensively mass-produced.
"Our overall goal is to collect and utilize as much solar energy as is theoretically possible and bring it to the commercial market in an inexpensive package that is accessible to everyone," Pinhero said. "If successful, this product will put us orders of magnitudes ahead of the current solar energy technologies we have available to us today."
As part of a rollout plan, the team is securing funding from the U.S. Department of Energy and private investors. The second phase features an energy-harvesting device for existing industrial infrastructure, including heat-process factories and solar farms.
Within five years, the research team believes they will have a product that complements conventional PV solar panels. Because it's a flexible film, Pinhero believes it could be incorporated into roof shingle products, or be custom-made to power vehicles.
Once the funding is secure, Pinhero envisions several commercial product spin-offs, including infrared (IR) detection. These include improved contraband-identifying products for airports and the military, optical computing, and infrared line-of-sight telecommunications.

Samsung sets up European LTE operation in UK

Exclusive organization covering the whole of Europe for mobile broadband equipment

By Nick Flaherty www.flaherty.co.uk

Samsung has set up a specialist organization, the Europe Network Operations (ENO), as a centre of 4G business in Europe. The ENO will be based in Samsung’s European HQ in Chertsey, UK.
In addition, the ENO plans to cooperate with European operators to find the most effective methods to handle mobile data traffic. Tailored to the business plans and local requirements of operators, Samsung will offer relevant, innovative solutions and progress field trials. The ENO will work to enhance LTE expansion in the European market.
Along with strengthening its presence in the region, Samsung aims to increase awareness of its field-proven LTE solution and is introducing its Smart LTE solution. This provides customized solutions which maximize and optimize the capability and usage of operators' existing network resources, reducing the overall cost of investment.
Through the use of intelligent radio resource allocation technology, Samsung’s Smart LTE solution improves the overall network capacity and coverage. The solution also enables high quality voice and data services in dense urban areas and rural environments while reducing the required number of base stations.
Samsung is also planning to extend the use of its multi-standard base station, capable of supporting LTE, Mobile WiMAX, WCDMA, GSM and CDMA within a single platform, reducing costs and saving time for operators migrating networks.
"We believe that ENO will play a pivotal role for Samsung in helping us achieve significant 4G LTE success in Europe, through the introduction of our advanced LTE technologies," said Youngki Kim, Executive Vice President and General Manager of Telecommunication Systems Business of Samsung Electronics. “Building on our 30 years of experience in the telecommunication systems industry, Samsung will prove that it’s the most reliable partner in Europe, as we have done all around the globe."
Based on the wide range of field experience of OFDMA technology, Samsung has successfully won 7 commercial LTE contracts and partnered with more than 30 global operators. Samsung has also established a strong position in the 3GPP (3rd Generation Partnership Project) standardization process. Samsung is one of the most influential network solution providers in the project, chairing three positions and three vice-chair positions across various working groups in the 3GPP. Additionally, Samsung owns more than 25% of total LTE IPR (Intellectual Property Rights) related to OFDMA technology, demonstrating its high levels of innovation in this field.
Enhanced by Zemanta

Monday, May 16, 2011

NXP aims to put an internet address in every light bulb

GreenChip smart lighting opens up new design approaches for energy efficiency

By Nick Flaherty www.flaherty.co.uk

NXP Semiconductors has launched a smart lighting solution that makes the Internet-enabled, energy-efficient lighting network a reality – not only for businesses, but also for consumers trying to make the most of energy savings in the home.
This would allow people to monitor, manage and control every light bulb from any Internet-enabled device – turning lights on and off individually, dimming or creating scenes from a smartphone, tablet, PC or TV – to save energy as well as electricity costs. The “smart lighting” network could have dozens or even hundreds of appliances connected through a wireless network designed for maximum energy savings, communicating information about their environment, about power consumption levels, and highlighting any problems.
NXP and partners TCP and GreenWave Reality are this week showing a consumer-ready, Internet-enabled Smart Lighting network powered by the GreenChip smart lighting solution.
“The GreenChip smart lighting solution signals a fundamental shift in the way we interact with lights – at home, in the office, even outdoors,” said John Croteau, senior vice president and general manager, power lighting solutions and high performance RF, NXP Semiconductors. “By bringing together wireless IP connectivity with our energy-efficient lighting and power conversion technologies in a compact, low-cost solution, we are transforming the way we design, control and manage lights. For individual consumers, Smart Lighting means highly personalized, intelligent lighting environments – lights that turn on and off when and where you need them, at the desired level of brightness – while saving power and electricity costs. Our smart lighting solution also brings us one step closer to the ‘Internet of Things’ – a world in which every home appliance can be monitored and controlled via an IP address – at a very compelling price point for consumers.”

GreenChip Smart LightingNXP’s GreenChip smart lighting solution reduces the requisite electronics to the size, cost and power consumption to fit in an everyday light bulb. It brings together wireless IP connectivity, energy-efficient lighting and low standby power (down to 50mW) in a compact, low-cost solution, which enables new ways to control lights and manage energy consumption.
The GreenChip smart lighting solution is available in two versions – GreenChip iCFL for compact fluorescents and GreenChip iSSL for LEDs – and currently includes:
  • The GreenChip iCFL or GreenChip iSSL chipsets, which function as highly efficient, dimmable drivers for smart lamps
  • An ultra-low-power standby supply controller with 10mW no-load capability; standby power is particularly critical in smart lighting applications where lamps are continuously “listening” for the command from the user and/or network
  • A 2.4-GHz IEEE 802.15.4 standard-compatible wireless microcontroller with a Tx/Rx current below 17mA
  • Low-power, IP-based wireless connectivity enabled by JenNet-IP network layer software
JenNet-IP Network 
GreenChip-enabled light bulbs will be able to operate on the same wireless sensor networks consumers may be using at home for energy metering, smart appliances and security systems. NXP’s JenNet-IP network layer software provides the ultra-low-power wireless connectivity in the GreenChip smart lighting solution. JenNet-IP is a 6LoWPAN mesh-under tree network with low memory footprint, specifically targeting low-power IEEE 802.15.4-based networking for residential and industrial applications. Based on NXP’s proven JenNet network protocol stack, JenNet-IP provides a highly robust self-healing tree network proven at over 500 nodes, supporting IPv4 and IPv6 with over-network upgradability. JenNet-IP is highly secure, offering 128-bit AES encryption with secure authentication and device joining, and will be made available under an Open Source license in Q4 2011.

Ecosystem
TCP, a leading manufacturer of CFL and LED lamps in North America, has been an early adopter of Smart Lighting technology, and is using the GreenChip smart lighting solution for both its CFL and LED lamps.
“Driving new ideas for energy-efficient lighting is in our DNA. Through our proprietary technology and innovations such as our TruStart and TruDim CFLs which build on custom TCP GreenChip CFL drivers from NXP, we’re able to match the quality of light and user experience of an incandescent lamp with up to 20,000 hours of life. As a next step, we are developing Internet-enabled CFL and LED bulbs accessible to mainstream consumers and commercial applications,” said Ellis Yan, CEO, TCP.
GreenWave Reality is introducing a breakthrough intelligent lighting control and management solution based on the GreenChip smart lighting solution. GreenWave Reality’s IP-based platform wirelessly connects GreenChip-enabled bulbs, running JenNet-IP software, to provide users with a feature-rich lighting application. The application can be used stand-alone or as part GreenWave Reality’s innovative energy management solution. The GreenWave Reality solution benefits both consumers and commercial customers by allowing them to save energy and simplify their lives by adding lighting Smart Controls.
For instance, consumers can dim or turn lights on and off using Home, Away, and Night Smart Controls from any combination of devices such as a PC, smartphone, and even a TV. The GreenWave Reality solution further simplifies consumers’ lives by extending the lighting Smart Controls to work with sensors without requiring any re-wiring of the home. As an example, a Smart Control can adjust indoor lighting according to outdoor lighting conditions. Other Smart Controls can automatically turn lights off when no one is in a room. Similarly, these advancements are extended to commercial and hospitality customers who can reduce ongoing lighting and related maintenance costs with this advanced lighting control system.
“Consumers and commercial customers now can easily and cost effectively reduce their energy consumption associated with lighting, saving them money, simplifying their lives, and making a positive impact on the environment,” said Greg Memo, CEO, GreenWave Reality. “GreenWave Reality – in conjunction with the GreenChip smart lighting solution – redefines lighting by providing an advanced control and management solution built on a scalable, IP-based platform.”

Availability
Reference designs using GreenChip smart lighting solutions are available immediately from NXP. Further information is available at: http://www.nxp.com/greenchip



Links
GreenChip – Smarter Power and Lighting Solutions
Video: NXP GreenChip smart lighting demo
NXP GreenChip lighting solutions selection guide
Video: GreenWave Reality intelligent lighting control and management solution

Enhanced by Zemanta

Friday, May 13, 2011

Rambus buys up crypto technology

Signs Definitive Agreement to Acquire embedded expert Cryptography ResearchBy Nick Flaherty www.flaherty.co.uk

Rambus, more famous for licensing high speed memory designs and fighting cases in court, is to buy  privately-held Cryptography Research, Inc. (CRI), a leading semiconductor security R&D and licensing company. Rambus plans to acquire CRI for $342.5 million comprised of $167.5 million in cash, approximately 6.4 million shares of Rambus stock, and $50 million payable to CRI employees in cash or stock over three years. This acquisition will expand the breadth of Rambus’ memory and communications  technologies available for licensing with complementary technologies from CRI that include patented innovations and solutions for content protection, network security, anti-counterfeiting and financial services.
Over five billion semiconductor products secured by CRI’s technology are made under license annually. CRI’s licensees include leading semiconductor, electronics and services companies such as Atmel, Infineon, Microsoft, NXP, Raytheon, Renesas, Samsung, STMicroelectronics, Toshiba, and Visa. CRI is led by internationally renowned cryptographer and scientist Paul Kocher, whose accomplishments include helping author the SSL 3.0 standard, discovering differential power analysis (DPA), as well as developing techniques for securing electronic systems against DPA attacks.
“Rambus will provide our team the perfect home to continue development of technology which addresses an increasingly complex range of security requirements,” said Kocher, president and chief scientist of Cryptography Research. “With many billions of connected devices conducting electronic transactions, storing important personal data, and delivering copyrighted content, the needs for security are paramount. Our passion is solving these challenging data security problems through innovative cryptographic techniques to the benefit of our licensed customers and consumers worldwide.”
Key technologies developed and licensed by CRI include DPA countermeasures. DPA attacks involve monitoring the fluctuating electrical power consumption of a target device and then using advanced statistical methods to derive cryptographic keys and other secrets. With CRI’s DPA countermeasures, electronic systems and security devices, such as smart cards, are protected from DPA attacks. Critical to electronic system security, DPA protection is now mandated for many government and commercial services.
“The addition of CRI’s world-class security technology is a pivotal step in our strategy to extend our IP leadership and aggressively drive our revenue growth,” said Harold Hughes, president and chief executive officer at Rambus. “Combined with our complementary semiconductor, and lighting and display technologies, we will create an unrivaled set of innovations and solutions critical for a broad range of electronics, with particular focus on the fast growing mobile market.”
CRI also offers anti-piracy and anti-counterfeiting solutions including CryptoFirewall technology. The CryptoFirewall core is a separate, on-chip, hardware-based security block that protects cryptographic keys and computations from attack. CryptoFirewall solutions can be used across a broad spectrum of applications including Pay TV security and counterfeit protection of printer consumables.
Enhanced by Zemanta

Green Hills designs new scheduler for multicore version of its secure INTEGRITY-178B operating system

DO-178B level A and SKPP/EAL6+ compliant operating systems for a multicore RTOS on Freescle QorIQ 

By Nick Flaherty www.flaherty.co.uk

The latest version of the INTEGRITY-178B real-time operating system (RTOS) from Green Hills Software supports multicore processors with initial availability on Freescale Semiconductor’s family of QorIQ processors.
Green Hills has developed a patent-pending approach to multicore processor scheduling called Time-variant Unified Multiprocessing (tuMP, pronounced “2-MP”) that supports robust partitioning and multi-level-secure operating system support across multiple cores in an operating environment that supports the combination of Asynchronous Multiprocessing (AMP) and Symmetric Multiprocessing (SMP).
For developers of real-time embedded computing systems with security- and/or safety-critical computing requirements, the advent of multicore processors has created a fundamental problem: how to develop, integrate or port previously independent applications running on single-core processors to an operating environment where these independent applications operate on a processor containing two or more independent processing cores with shared system resources. Several multicore operating system paradigms have been developed in the past, including Asymmetric Multiprocessing (AMP), where each core runs a completely independent executable; Symmetric Multiprocessing (SMP), where an executable is designed to make use of multiple cores simultaneously; and combinations of both (some cores used for AMP, other cores used for SMP). The rigidness of these approaches is evident when attempting to integrate additional applications into a multicore processor-based platform.
The latest version of INTEGRITY-178B builds upon its ten-year service history and certification in critical airborne avionics, communications and flight control systems by adding support for multiple independent safety- and/or security-critical applications to execute on a multicore operating environment in a predictable and bounded manner such that the application independence is retained even when sharing a processor’s multiple cores and other system resources.

Affinity Groups As any single core in a multicore processor may provide more execution capabilities than any single application requires, and since some of these applications may be designed to utilize multiple cores simultaneously, Green Hills has extended its partition scheduler design to give in a single OS (i.e. unified) that provides practical time variant scheduling of both AMP and SMP applications simultaneously by enabling the association of cores and applications into groupings (called Affinity Groups) corresponding to some intended function (or functions). These Affinity Groups define how cores will be utilized by one or more applications, with the Affinity Groups (grouping of cores and applications) being permitted to vary over time. Affinity Groups may be scheduled independent of other Affinity Groups, permitting time-lines that closely correspond to application requirements, yet also permitting other sets of Affinity Groups to be developed that can make use of any of the time windows where cores are not being utilized. Any new application (or extension of an existing application) can make use of the unallocated execution time across the entire multicore processor.
The INTEGRITY-178B for multicore architectures is initially available for Freescale Semiconductor’s family of QorIQ processors with P4080 support available first. INTEGRITY-178B is also available with Green Hills Software’s MULTI/AdaMULTI integrated development environment (including optimizing C, C++ and Ada95 compilers).
Enhanced by Zemanta

Thursday, May 12, 2011

Libelium enables over the air programming with 802.15.4 and ZigBee

Entire network re-programmed in a couple of minutes using multihop routing

By Nick Flaherty www.flaherty.co.uk

Libelium has launched technology for over the air programming (OTAP) for wireless sensor networks and the Internet of Things. This brings OTA capabilities for the first time to unlicensed frequency bands (2.4GHz, 868MHz, 900MHz) and to low power communication using protocols such as 802.15.4 and ZigBee.
Over the last decade wireless programming or over the air provisioning (OTA) has been widely used by the mobile phone industry. This capability has allowed software updates to be delivered to mobile phone users and to enable the deployment of new services as they become available. So far, such capabilities have not been available to wireless sensor networks or to the Internet of Things. Such networks, usually consisting of hundreds or thousands of nodes (“motes”), would benefit from an OTA capability.
“Motes are often located in places that are either remote or difficult to access," said David Gascón, Libelium’s CTO. "Libelium OTA will enable firmware upgrades to be made over a wireless network without the need of physical access”. He adds, “The new OTAP feature, together with battery recharging via a solar panel, will keep the maintenance costs of wireless sensor networks to a minimum allowing the deployment of networks with thousands of nodes”.
Firmware upgrades can be made within minutes and it is possible to choose between updating single nodes (unicast), multiple nodes (multicast) or an entire network (broadcast). OTA can also be used for the recovery of stuck nodes. Furthermore it is possible to find nodes in a particular area by broadcasting a discovery query.
Libelium OTA can work with both direct- and multihop-access. In the case of 802.15.4 networks, the nodes to be upgraded can be accessed directly by the gateway. With ZigBee, it is usual that a series of nodes must forward packets sent by the gateway to the chosen destination. When performing OTA with direct access the frequency channel used in the 2.4GHz band is changed so no interferences are caused to the rest of the nodes.
The Libelium OTA provides two levels of security: - firstly the data transmitted is encrypted using the AES-128 algorithm; secondly a pass key must be authenticated in each node before the OTA process starts.
For wireless sensor networks implemented with Waspmote, programs sent are stored in a 2GB SD card enabling thousands of different software versions to be stored and managed on a single mote. The management OTA application runs in Windows, MacOS and Linux and it is freely available for clients of the Waspmote platform.
Waspmote is a modular platform for building wireless sensor networks. The platform comprises: the Waspmote board with microcontroller, memory, battery, accelerometer and sockets for add-on modules; open source API and compiler; a range of ZigBee wireless communication modules offering a choice of protocol versions, radio frequency and range (up to 12 km); wireless modules supporting Bluetooth, GPRS, GPS; and a wide variety of sensor boards enabling the measurement of gases, physical events, agricultural & smart metering parameters; and outstanding power management - an unprecedented 0.7 microamperes is required in hibernate mode. Waspmote is CE, FCC and IC certified. http://www.libelium.com/waspmote
Enhanced by Zemanta

Tuesday, May 10, 2011

VIA Labs links USB3.0 to SATA

V bridge controller provides more flexibility for embedded designs
By Nick Flaherty www.flaherty.co.uk

Embedded chip developer VIA Labs has had its VL701 Low-Power USB 3.0 to SATA Bridge Controller certified by the USB Implementers Forum (USB-IF) as adhering to strict power-consumption criteria for bus-powered devices. VIA Labs is currently the first and only company to achieve USB-IF Bus-Powered certification using a traditional hard disk drive, which draws more power than flash-based devices.
The comprehensive suite of tests conducted as part of the USB-IF Compliance and Certification Program ensures that certified products are interoperable with existing USB devices while also offering all the speed and power enhancements of the USB 3.0 specification.
With the industry's first fully-integrated 5V switching regulator, the VL701 is a highly integrated single chip solution that allows users to connect any SATA hard disk drive (HDD), solid state drive (SSD), or optical disc drive (ODD) to their PC via USB 3.0. With data transfer rates of up to 5Gbps, data stored on SATA devices can be effortlessly transferred to a PC in a fraction of the time it would usually take compared to USB 2.0 or Firewire.
Cal-Comp Electronics and Communications, a leading Electronics Manufacturing Services (EMS) and Original Design Manufacturer (ODM) that contracts with many name-brand customers worldwide, adopted and integrated the USB-IF Certified VL701 it into its upcoming USB 3.0 external storage products.
“The VL701 is an advanced, highly-integrated USB 3.0 to SATA Bridge that lets users experience the benefits of USB 3.0 using hard drives, optical drives, and even SSDs,” said David Hsu, Associate Vice President, VIA Labs, Inc. “The low power aspect is compelling for both end-users and manufacturers by enabling lower operating temperatures and longer battery life without sacrificing performance.”
Enhanced by Zemanta

Portable Multimedia: NVIDIA makes key move into wireless with Icera

Portable Multimedia: NVIDIA makes key move into wireless with Icera

NVIDIA is to add baseband and RF capability to its Tegra processors by acquiring reconfigurable technology developerIcera in a $367m deal.
‪“This is a key step in NVIDIA’s plans to be a major player in the mobile computing revolution,” said Jen-Hsun Huang, President and CEO of NVIDIA. “Adding Icera’s technology to Tegra gives us an outstanding platform to support the industry’s best phones and tablets."
Enhanced by Zemanta