All the latest quantum computer articles

See the latest stories on quantum computing from eeNews Europe

Wednesday, August 19, 2009

Wireless power standard emerges with logo


A standard for wireless charging of portable equipment is emerging through the Wireless Power Consortium. It has released the 0.95 technical specification for a global wireless power charging standard for low power devices that are 5 watts and below, such as mobile phones and personal music players. It is out for review by its members and announced the launch of prototype testing at a members' interoperability test to be held on 15-17 September, 2009.
The Consortium, established at the end of last year, has also chosen the logo “Qi” (pronounced “chee”, meaning “energy flow”) to represent the first international wireless power standard which brings new levels of convenience to power charging in consumer electronic devices.

“In just seven months the Wireless Power Consortium has advanced the standard to 0.95 for interoperability testing and moved to trademark “Qi” as the first universal wireless power standard. These significant milestones have been achieved through strong collaboration among the Consortium members and pave the way for an accelerated 1.0 release schedule of the standard,” said Camille Tang, Co-Chair of the Promotion Work Group at the consortium.

The interoperability test will be hosted in Eindhoven, The Netherlands, during the next Consortium meeting and is open to existing and new members joining prior to 15 September 2009.
In a recent survey by the consortium 90% of respondents said they would like to see a uniform symbol placed on electronic devices to indicate that the devices are equipped with wireless power charging. Under the consortium’s plans, all electronic devices bearing the “Qi” symbol can be charged on any charging pad or surface marked with the same “Qi” logo.



Full members:
ConvenientPower
Fulton Innovation
Logitech
National Semiconductor
Olympus
Philips
Sang Fei
Sanyo
Texas Instruments


ASSOCIATE MEMBERS

Duracell
Hosiden
Leggett & Platt
Samsung Electronics
ST-Ericsson
Reblog this post [with Zemanta]

Tuesday, August 18, 2009

Downturn hits as GE Fanuc splits

GE Fanuc Automation, the twenty year old joint venture between GE and FANUC, is to be dismantled by the end of the year. GE and FANUC expect the transaction to be completed by the end of this year, subject to satisfactory customary closing conditions. It denies the split is due to market conditions, see comments above.
Set up in 1986, GE Fanuc Automation serves a vast array of industries around the world including the energy, water, consumer packaged goods, government & defence, and telecommunications industries with hardware and software solutions, services, automation and embedded computing systems.
Under the terms of the agreement GE retains the software, services, embedded systems and control systems businesses globally. The company will be known as GE Intelligent Platforms, and will be led by GE Fanuc Intelligent Platforms CEO Maryrose Sylvester. FANUC retains the global CNC business.

FANUC Honorary Chairman Dr. Seiuemon Inaba said, “Our joint venture has achieved great success toward its original mission, which was to cooperate on the global growth and technical development of the PLC and CNC business. Over this time period, markets and opportunities also have changed dramatically, and both companies further expanded into adjacent segments. Today’s market conditions are such that it’s imperative we pursue these expanded opportunities, and while we have achieved great things together, it’s in both our best interests that we focus our efforts on industry opportunities unique to our respective companies and that will deliver greater benefits to both our companies.”

GE Fanuc Intelligent Platforms CEO Maryrose Sylvester said, "GE could not have asked for better partners than Dr. Inaba and FANUC. GE is proud of what our companies have achieved together - both the industry expertise and success across our product portfolios. For GE, this change will mean a continued, intense focus on serving our customers around the world while continuing to invest in significant growth platforms like process control systems, enterprise and automation software and embedded computing as we continue to build further expertise around the GE vertical infrastructure segments."
“Our top priority is a smooth completion of transition and continuity for all customers, business partners and employees. We are committed to delivering our customer commitments in every segment of our business."


Reblog this post [with Zemanta]

Friday, August 07, 2009

First European 1Gb/s Internet

Zon Multimedia in Portugal is planning to launch a 1Gbit/s Internet service in September, reports Julian Clover at Cable TV Europe and other sources.
This is a phenomenal rise in speeds, and will put pressure on other providers across Europe who have been talking about 100Mbit/s, which Zon launched in January.
The system, which runs over cable, has already been field tested.
These speeds will drive a whole new class of Internet connected services and devices over the next two to three years.

Reblog this post [with Zemanta]

Wednesday, August 05, 2009

Linux and Nucleus for Marvell Sheeva chip

Mentor Graphics has developed a combined open-source Linux and Nucleus operating system (OS) solution for the Marvell Sheeva MV78200 Dual-core Embedded Processor.
This dual operating system support was co-developed by Mentor and Marvell for low power devices such as network controllers, switches and routers, high-performance storage, enterprise printers, DVRs, NVRs and video surveillance, and high-volume SMB gateways.
“Our collaboration with Mentor Graphics’ embedded systems team has allowed Marvell to address the multi-OS needs of our customers using dual-core processors,” said Dr Simon Milner, vice president and general manager of the Enterprise Business Unit, Consumer and Communications Business Group at Marvell Semiconductor. “The performance and real time qualities of Mentor’s Nucleus OS complement the power and flexibility of Linux, while their tools and services give our mutual customers a boost in product development.”

The MV78200 is a dual-core, high-performance, low-power, highly-integrated processor with the Marvell Sheeva CPU cores. Built on Marvell’s innovative Discovery system controller platform, the MV78200 is a complete System-on-Chip (SoC) solution, optimized for low power operation and ideally suited to a wide range of applications ranging from sophisticated routers, switches and wireless base stations to high-volume laser printer applications. Developers can use the dual OSs to manage separate functional requirements, yet allow them to easily and reliably communicate with each other. Mentor’s Nucleus OS is a fast, scalable and deterministic OS that can be used for operational tasks such as those required in printing drums and ink coverage for enterprise printers, whereas the Linux OS would be used for user interaction and communication.

Reblog this post [with Zemanta]

China chip market booms


China's IC market is expected to reach $100.1 billion in 2013 and represent over one-third (35%) of the worldwide IC market, up from only 14 in 2003 (Figure 1) according to IC Insights Mid-Year Update to The McClean Report.
In 2001, the Asia-Pacific IC market (which includes China, Taiwan, Singapore, Korea, etc.) first surpassed the Americas segment (the U.S., Canada, Mexico, Central America, and South America) and became the leading IC-consuming market.
In 2008, the Asia-Pacific IC market was $111.2 billion, and, for the first time ever, was larger than the Americas, European, and Japanese IC markets combined!
The tremendous growth of the Asia-Pacific IC market over the past few years mirrors the trend toward increasing electronic system production in the Asia-Pacific region, especially in China. In general, regional IC market growth is typically closely matched to the growth of regional electronic system production.
With more of the world's electronic systems forecast to be produced in Asia-Pacific (non-Japan), and China in particular, IC Insights believes that Asia-Pacific IC market growth will continue to significantly outpace total IC market growth for at least the next five years.
In 2009, China and Taiwan together are expected to represent about 75% of the IC market in the Asia-Pacific region. In 2013, IC Insights forecasts that the China and Taiwan IC market together will reach about $139 billion and represent almost 80% of the total Asia-Pacific IC market and almost half (48%) of the worldwide IC market!
In 2008, China's IC market increased 5% to $56.2 billion as compared to a 6% decline for the total worldwide IC market. Although China's IC market is forecast to decline by 8% in 2009, this performance would still be much better than the 17% drop expected for the total IC market. Moreover, the Chinese IC market is forecast to have a 2008-2013 CAGR of 12%, double the 6% forecast for the worldwide IC market during this same time.

Tuesday, August 04, 2009

High speed 64Gbyte memory cards emerge

Looking back even a couple of years, the prospect of using a 64Gbyte memory card for storage would seem fantastic, but Toshiba is planning to ship such cards, using the latest SDXC standard, to OEMs in November.
The new SDXC and 32Gbyte and 16Gbyte SDHC Memory Cards are the world’s first memory cards compliant with the SD Memory Card Standard Ver. 3.00, UHS104, which brings a new level of high speed read and write speeds to NAND flash based memory cards: a maximum write speed of 35MByte per second, and a read speed of 60MByte per second. For example, it would be possible to download 2.4GB video data in only 70 seconds.
SDXC Memory Card is the next-generation SD Memory Card standard defined by the SD Association in April 2009, in order to meet the ever-growing demand for high-capacity memory media, offering higher transfer rates for content rich storage applications. The new SDXC Memory Card Standard applies to cards with capacities over 32GB and up to 2Terabytes compared to the SDHC standard, which applies to cards with capacities from 4GB to 32GB. Like the move from SD to SDHC, the new cards are only compatible with SDXC readers, not existing SDHC systems.
UHS 104 is the new ultra high speed interface that delivers data at a rate of 104MB/ sec. It is the highest standard in the new SD Memory Card Standard Ver. 3.00.


Reblog this post [with Zemanta]

Wireless test and virtualisation for LabView 2009


National Instruments has launched its the latest version of the LabView graphical system design software platform for test, control and embedded system development. LabVIEW 2009 simplifies the development challenges of complex test systems with new tools that streamline the software engineering process for the development, deployment and maintenance of critical test software. It uses parallel programming features such as virtualisation technology that increase the performance for multicore-enabled test applications and offers LabVIEW FPGA compiler improvements to simplify field-programmable gate array (FPGA) reconfigurable I/O (RIO) development. In addition, LabVIEW provides new solutions for testing systems based on wireless standards such as WLAN, WiMAX, GPS and MIMO using a common hardware platform.
“In today’s challenging economic climate, engineers and scientists are being asked to complete their projects with fewer resources and in less time,” said Dr. James Truchard, President, CEO and Cofounder of National Instruments. “With LabVIEW 2009, test engineers can develop complex and mission-critical applications faster while improving their overall test system performance.”

Streamline Test Software Validation
LabVIEW 2009 features new tools for software engineering and code validation that make it possible for engineers and scientists to easily meet the regulatory and software engineering requirements of complex test systems. With the new version of LabVIEW, engineers and scientists can trace the implementation of test system requirements to virtual instrument (VI) programs and easily monitor low-level details about the execution of critical VIs for quick application monitoring and debugging. In addition, LabVIEW 2009 can automate the functional testing of each VI to guarantee that the VIs meet all necessary specifications. These new software engineering tools complement existing LabVIEW features for large application development and help engineers and scientists create high-quality test systems.
Improve Parallel System Development
With LabVIEW 2009, engineers and scientists can easily develop applications that take advantage of inherently parallel technologies such as FPGAs and multicore processors. Virtualisation technology makes it possible to run multiple OSs side by side on the same multicore processing hardware to build more efficient systems. Using new NI Real-Time Hypervisor software, engineers and scientists can run Windows XP and LabVIEW Real-Time OSs side by side on the same PXI embedded controller and partition the processor cores among the two OSs for more efficient use of system resources.
The LabVIEW 2009 FPGA Module also further reduces the time required to program FPGA RIO devices by providing early compile feedback and critical path highlighting during compilation and simulation on a development computer. This helps engineers and scientists make early FPGA resource usage estimates and better debug timing violations. They also can further reduce development time by simulating the behavior of an FPGA on a development computer instead of compiling to the FPGA.
Test More Wireless Devices and Standards
LabVIEW 2009 improves the performance of radio frequency (RF) and wireless test by taking advantage of multicore processors. For example, engineers and scientists can use LabVIEW and off-the-shelf multicore processors to increase the speed of wireless measurements such as spectral masks and error vector magnitude used in WLAN test. The recently released NI WLAN Measurement Suite for LabVIEW guarantees compliance with IEEE 802.11 a/b/g standards and performs measurements more than five times faster than traditional box instruments. With software-defined instrumentation using LabVIEW, engineers and scientists can implement the same measurement platform to generate, analyse and simulate nearly any wireless standard or custom protocol. In addition to the WLAN Measurement Suite, the recently released WiMAX, GPS and MIMO tools for LabVIEW help engineers and scientists increase their performance when testing multiple standards using a common PXI hardware platform.

Reblog this post [with Zemanta]

Sunday, August 02, 2009

Google data on spring cleaning solar panels

Google has been looking at whether it should clean its solar panels, and d'uh, finds that the efficiency rises dramatically when it does! However, there are also some interesting slides on the data they collected.

Ever since we assembled a 1.6 MW solar panel installation at our headquarters in Mountain View in 2007, we've been wondering, "Does cleaning the solar panels make them more effective?" We thought it might, but we needed to be sure. So we analyzed the mountains of data that we collect about the energy that these panels produce — after rain, after cleaning and at different times of the year.

We have two different sets of solar panels on our campus — completely flat ones installed on carports, and rooftop ones that are tilted.

Since the carport solar panels have no tilt, rain doesn't do a good job of rinsing off the dirt they collect. (Also, our carports are situated across from a sand field, which doesn't help the situation.) We cleaned these panels for the first time after they had been in operation for 15 months, and their energy output doubled overnight. When we cleaned them again eight months later, their output instantly increased by 36 percent. In fact, we found that cleaning these panels is the #1 way to maximize the energy they produce. As a result, we've added the carport solar panels to our spring cleaning checklist.

The rooftop solar panels are a different story. Our data indicates that rain does a sufficient job of cleaning the tilted solar panels. Some dirt does accumulate in the corners, but the resulting reduction in energy output is fairly small — and cleaning tilted panels does not significantly increase their energy production. So for now, we'll let Mother Nature take care of cleaning our rooftop panels.

Accumulated dirt in the corners of a rooftop solar panel

We've also been crunching numbers on dollars-and-cents; the more energy our panels produce, the sooner we'll be paid back by our solar investment. Our analysis now predicts that Google's system will pay for itself in about six and a half years, which is even better than we initially expected.

If you want to learn more about our solar study, check out these slides showing the effects that seasonality, tilt, dirt, particulate matter, rain and cleaning have on Google's solar energy output. We hope you solar panel owners out there can tailor our analysis to the specifics of your own installation to produce some extra energy of your own!


Reblog this post [with Zemanta]

Thursday, July 30, 2009

Printable electronics centre sees £20m boost

The Printable Electronics Technology Centre (Petec) near Durham, UK, is to get £20 million to expand its facility and services. The centre, at NETPark in Sedgfield, will receive £12 million from the UK Government’s Advanced Manufacturing strategy, and £8 million from the Regional Development Agency – One North East.
The funding will add new equipment for prototyping applications in:
* printable photovoltaics
* ultra-efficient lighting
* printable flexible displays
* new intelligent packaging

The new investment will also result in:
* 500m2 of new hi-tech equipment space for large-area application and production of pilot product manufacturing
* The development of new applications and knowledge which will attract new companies to the UK
* New private sector investment into novel lighting and solar energy harvesting applications
* Key technology applications in wide-area displays, photovoltaic generation, novel lighting and smart packaging by stimulating collaborations with new companies and linking with academia
* The development of a regional and UK-wide display, lighting and photovoltaic supply chain
* The work on Photovoltaic Cells and energy-efficient Organic Solid State lighting is also further investment in the North East’s new low-carbon industries, following announcements this month in projects covering wave power, biofuels, electric vehicles and industrial biotechnology
In the next four years it is estimated that this investment will stimulate the creation of up to 250 jobs in the North East and up to 1,500 jobs nationally.
"One North East has been investing in PETEC for some time now, having identified printable electronics as one of the emerging industries that can drive the region’s economy forward," said Alan Welby, Director of Strategy at One North East. "The groundbreaking research and development work that has been taking place in Sedgefield is fast approaching a stage where it can become an area of major industrial growth and job creation for North East England."


Reblog this post [with Zemanta]

Wednesday, July 29, 2009

Reconfigurable computing sees giant launch

With 96 high end FPGAs and 26 quad-core Nehalem Xeon processors, the world's largest and most powerful reconfigurable computer has been launched at the University of Florida.
Novo-G uses 96 Altera Stratix-III E260 devices, each with 768 18x18 multipliers, 254K logic elements and 204K registers, with 4.25GB of memory attached. These are housed in 24 GiDEL ProcStar-III quad-FPGA boards and supported by the 26 quad-core processors, 20Gb/s non-blocking DDR InfiniBand, GigE, and 576GB total RAM.
“Construction has been completed on the new Novo-G machine and it is now ready to support a variety of research experiments in CHREC for various projects and participants,” said Dr. Alan D. George, Professor of ECE and Director of the NSF Centre for High-performance Reconfigurable Computing (CHREC) at the University of Florida. “Novo-G is believed to be the most powerful reconfigurable computer in the known world, certainly at least the academic/research community and the FPGAs featured in Novo-G are among the most powerful available today.”

“Although Novo-G may at first sound like it only serves as a research machine in the HPC realm of reconfigurable computing (RC), in reality it supports equally well the HPEC (embedded) realm of RC,” he said. “The boards featured in Novo-G (GiDEL ProcStar-III) are themselves originally marketed and intended as embedded processing boards, each with four big FPGAs with many attached memory banks plus various other supporting devices. We happen to be putting and using more of them in a single machine than anyone has attempted before and researchers can focus on issues with a single FPGA, a set of two, three, or four FPGAs on a single board with fast streaming pipes between, or many FPGAs (up to 96) spanning multiple boards, as their needs require. Thus, Novo-G will be supporting RC research projects that span the HPC and HPEC sides.

Novo-G will support a variety of tools, including vendor tools as well as various CHREC tools for formulation, design, translation, and execution. At the device level, Novo-G of course supports applications design with VHDL and Verilog, but also several high level ESL programming languages.
“We have successfully ported the Impulse-C tool to this platform, the Altera FP Compiler is already in use in our work, and efforts are in progress to do the same for Mitrion-C, all with help from the board and associated tool vendors,” said Dr George “Efforts are in the works to port our CHREC performance tool (ReCAP) and its debug/verification sidekick to Novo-G, and our folks on RCML, Intermediate Fabrics, etc. also have plans for Novo-G.”

CHREC research equipment features a broad assortment of high-end FPGAs, accelerator boards, servers, clusters, and scalable systems. RC resources include those from AlphaData (boards), Altera (devices, boards, tools), Celoxica (boards), Cray (machines), DRC (machine, module), GiDEL (boards, tools), Nallatech (boards, cluster, tools), Pico Computing (boards), SGI (machines), SRC (machines), Tilera (GFE board), Xilinx (devices, boards, tools), and XtremeData (machines, modules).

Reblog this post [with Zemanta]

Monday, July 20, 2009

Quad DAC with EEPROM for portable apps

Microchip has developed the industry’s first 12bit Quad Digital-to-Analogue Converter (DAC) to include non-volatile EEPROM, enabling the DAC’s configuration to be loaded automatically during power-up. The low power of the device targets portable consumer applications such as personal media players, digital cameras and GPS devices as well as industrial and automotive.
The on-board EEPROM, coupled with an internal voltage reference, four-channel architecture and rail-to-rail precision output amplifier, enables the MCP4728 to significantly reduce the size and component cost in a variety of battery powered and power-constrained applications.
Through the integrated I2CM serial interface, designers can configure the MCP4728 input codes, configuration bits and I2C address bits. This configuration information is stored in the non-volatile EEPROM and therefore retained after power is removed, making it available immediately after power is reapplied and reconfiguring the DAC during power-up.
The architecture of the MCP4728 also allows each of the four channels to be individually shut down, reducing power consumption to as low as 40nA and helping designers to meet or exceed cost and size requirements while providing the resolution and low power consumption that today’s battery powered and power-constrained applications require. These include consumer (personal media players, digital cameras and GPS devices); medical; industrial; appliance, and automotive (LED lamps and alarm/security systems) devices.
The $15 MCP4728 Evaluation Board is available to help designers quickly evaluate the MCP4728 DAC in their applications, and the DAC is sampling now in a 10-pin MSOP package.

Reblog this post [with Zemanta]

Semiconductor market sunshine


Following four consecutive quarters of reductions, global inventories of chips have declined to appropriate levels, says market researcher iSuppli, clearing the way for stockpile rebuilding and higher sales in the second half of the year.
After declining by 2.2 percent and 6.6 percent in the third and fourth quarters of 2008, inventories at global semiconductor manufacturers plunged by 15.1 percent in the first quarter, followed by a moderate 1.5 percent in the second quarter. At the end of the second quarter, iSuppli preliminarily estimates that inventories fell to $24.9 billion, down from the recent peak of $32.6 billion in the second quarter of 2008.
“Falling demand in the first half of 2009 prompted a swift inventory correction among chip suppliers,” said Carlo Ciriello, financial analyst for iSuppli Corp. “Companies dialed down utilization levels and cleared swaths of inventory by reducing Average Selling Prices (ASPs) in anticipation of continued depressed demand. Furthermore, semiconductor suppliers cut costs in an effort at right-sizing to better reflect the economics of smaller end markets.”

This is another positive sign after increasing utilisation levels at foundries such as TSMC.
The semiconductor inventory reduction effort was not limited to chip suppliers, with other segments of the electronics supply chain following suit. These segments include storage product makers, mobile handset OEMs, Electronics Manufacturing Services (EMS) providers and distributors.
iSuppli forecasts that second-half inventories will increase modestly in unison with sequential revenue increases for the global semiconductor industry. After an 18.8 percent decline in the first quarter of 2009 and a 7.1 sequential increase in the second quarter, global semiconductor revenue will rise in the second half, in line with financial guidance from Intel Corp. and other chipmakers. Global semiconductor revenue will increase by a vigorous 10.4 percent in the third quarter and by 4.9 percent in the fourth, iSuppli predicts.
Semiconductor inventories will rise by 5.5 percent in the third quarter and by 1 percent in the fourth to end the year at $26.5 billion, still an appropriate level for the demand, iSuppli predicts.
“Despite the more optimistic outlook, corporations remain apprehensive about the second half, consistently noting fragile demand,” Ciriello said. “Market values have declined, and the tradeoff between raising prices and maintaining market share has commanded more management attention than usual. However, anticipating longer-term end-demand has proven difficult,” Ciriello said. “Thus, a self-inflicted oversupply situation with too much inventory build would be akin to applying frost to blossoming green shoots.”


Reblog this post [with Zemanta]

Energy harvesting made simple


Energy harvesting is a very interesting concept but hasn't yet made it into the mainstream. This is despite some quite compelling technology developments and key researchers such as TI's Gene Frantz looking closely at it.
Part of the problem as been putting together all the bits to make it work, to take the power modules that convert vibration or temperature differences into power for a sensor. Another problem is that this power source tends to be intermittent and a capacitor or other storage can be needed. Then you need very low power electronics to make it work properly.
All in all, a bit of a challenge, but now low power wireless microcontroller and module maker Jennic in Sheffield has developed a demonstration platform that solves all these issues.
This platform combines a sensor with a 32bit controller and standards-based low power wireless link to send signals without batteries, eliminating the potential maintenance overheads of conventional battery power by harvesting energy from sustainable sources.
This appeals to applications that don't usually take up new technology quickly such as Energy and Environmental Management, Building Management, Process Control, Condition Monitoring, Logistics and Asset Tracking, but having a ready-made platform allows sensors to be quickly and easily developed and deployed. Using energy harvesting means the sensors - usually temperature - can be easily deployed without wires and without having to have a costly maintenance schedule to go and replace the batteries.
“Harvesting energy from sustainable sources presents designers with the ultimate power challenge: the energy supplied is not necessarily continuous and is available at relatively low levels,” said Jimi Simpson, Jennic Product Marketing. “This means that every element of the design, from the sensor to the microcontroller, must be considered and managed to achieve the highest levels of power efficiency.”
For the platform, Jennic has worked with other technology suppliers:
- Micropelt for thermogeneration, converting temperature gradients into electrical energy;
- Cymbet, an expert in energy storage and solar power conversion;
- AdaptivEnergy, for harvesting mechanical energy, such as impulse, shock, vibration and footfall, using piezo-based DC power supplies and
- Powercast, for RF energy harvesting. 
Jennic has developed an ultra low power sensor solution based on its JN5139 and JN5148 wireless microcontrollers that interfaces to each harvesting source to obtain the power needed to make periodic sensor measurements and transmission of the same over the wireless network to a central controller.
The 32-bit RISC processor in Jennic’s wireless microcontrollers provides the processing capability to implement a software-controlled charge-and-fire energy management process, in which the microcontroller periodically wakes to measure energy levels, and then measures and transmits data when sufficient energy is available.
“The JN5148 wireless microcontroller undoubtedly sets the benchmark for ultra-low power IEEE802.15.4 based wireless in energy harvesting; featuring sleep current levels of <1µA, an active transmission current of 15mA and a receive current of 18mA,” said Simpson. “This ultra-low current consumption enables the JN5148 to use the smallest of energy stores including super capacitors and rechargeable cells to allow the lowest cost BOM.”


Reblog this post [with Zemanta]

Thursday, July 02, 2009

USB3 deal for ARC

Chip designer Initio is to use the ARC600 configurable core for a family of USB 3.0 and solid state drive (SSD) controllers. The ARC600 core, developed by ARC International of the UK, will be embedded within USB 3.0 bridge controllers and SSD controllers to provide a Serial ATA2 to USB 3.0 Bridge and/or individual SATA2 and USB 3.0 outputs, replacing an 8051 core. The ARC600 also has the advantage of occupying the same silicon area and operating at the same level of power as the 8051 it replaces.
The USB 3.0 (SuperSpeed USB) market is expected to begin shipping as discrete silicon this year with broad deployment of SuperSpeed USB-enabled products expected in 2010 according to market research firm In-Stat. The interface will target applications requiring high rates and volumes of data transfer, such as external storage, consumer electronics, and communications devices with increasing amounts of storage. The replacement potential for USB 3.0 is enormous. In-Stat counts more than 2.6 billion USB-enabled devices shipped in 2007 and expects annual shipment growth of USB-enabled devices through 2012 to be 8.3 percent. SSD unit shipments will also enjoy strong growth. IDC predicts a compound annual growth rate (CAGR) of 76 percent from 2007-2012.
"We're extremely pleased with the performance of the ARC 600 in our USB 3.0 chip design," said Jui Liang CEO at Initio Corp. "The core provides just the right silicon area and power consumption for the solid state disk controller and USB 3.0 application. It has more than enough processing power to handle the 5.0 Gbit/s data rate of USB 3.0 as well as the more complex USB 3.0 control logic."
Initio is a leading ASIC supplier for storage applications with offices in Taiwan, USA, and China. Initio's product lines including interconnect bridge controllers for USB, Firewire 400/800, eSATA, SATA 1.5G/3G, and SSD controllers.

Reblog this post [with Zemanta]

Thursday, June 25, 2009

Multicore move for GE Fanuc

GE Fanuc Intelligent Platforms is to use Freescale’s multicore QorIQ processors in forthcoming products. QorIQ processors feature up to eight cores for maximum performance, and allow GE Fanuc to develop new platforms that will be form-, fit- and function compatible with their PowerPC predecessors and enable existing customers to take advantage of exciting new levels of performance at minimal cost. These new platforms will also allow lower power consumption and heat dissipation per unit of performance.
The QorIQ technology will be used in GE Fanuc’s VME-based, 3U VPX-based, 6U VPX-based and 3U CompactPCI-based families of single board computers. Support for both the eight core P4080 QorIQ processor and the dual core P2020 processor is also planned. All products based on QorIQ technology will be available in five ruggedization levels – including full conduction cooling over the -40°C to +85°C range - to meet the demanding requirements of military customers.
“We have been developing Power Architecture products since the early 1990s,” said Peter Cavill, General Manager, Military & Aerospace Products, GE Fanuc Intelligent Platforms. “Since then, we have followed up with a growing family of Power Architecture platforms that have enabled our customers to take advantage of the latest processing technologies, keeping their systems at the leading edge of performance with minimum integration effort, and minimizing long term cost of ownership.”
“One of the QorIQ-based products we will introduce will be pin-compatible with the PPC2A – a product we announced in 1997,” he continued. “That’s a powerful demonstration of how we help protect our customers against obsolescence. We expect that this new generation of single board computers will also provide compelling price/performance advantages for new customers.”
The P4080 processor is rated at less than 30 watts and combines eight Power Architecture e500mc cores operating at frequencies up to 1.5 GHz. The P2020 core operates at up to 1.2GHz and Freescale believes this is ideal for applications that have tight thermal constraints.

Monday, June 22, 2009

Multicore TVs: LG signs ARM

LG Electronics, one of the world’s largest digital TV brands, has licensed multicore processor and graphics technology from ARM for its next generation of digital TVs.
LG will use the ARM11 MPCore multicore processor to target a range of platforms with the same architecture simply by implementing single or multiple SMP cores. It will also use ARM Mali-200 and Mali-400 MP graphics processors for 1080p resolution displays for home cinema experience that includes high-definition graphics, whilst vastly improving the browsing experience on DTV user interfaces.
This will also be used to support a full Web 2.0 experience from their DTVs with Adobe and Open source software platforms and the emergence of tru2way technology for interactive cable services, including video-on-demand, voting and polling, games, and e-commerce without the need for a separate set-top box. Additionally, manufacturers are striving to build intelligent AV processing and develop home devices that are more energy efficient.
“By licensing ARM technologies, LG Electronics will be able to offer a future-proofed premium-quality digital TV experience for today’s connected home,” said Seung-Jong Choi, research fellow of Digital TV Lab, LG Electronics. “The connected home relies on technology that is fully functional and that guarantees a high-quality, energy efficient multimedia experience. With Web 2.0 requirements moving into a connected and high definition home, LG Electronics has selected the ARM architecture to guarantee longevity for our own technology.”

The market proven ARM11 MPCore synthesizable multicore processor provides a scalable solution that addresses the requirements of multiple designs. Devices can be configured to contain between one and four processors delivering up to an aggregate 5000 Dhrystone MIPS of performance at 1GHz while providing existing software portability across single CPU and multi-CPU designs. The ARM11 MPCore processor provides the memory throughput required of data intensive applications while delivering greater performance at lower frequencies than comparable single processor designs, so offering significant cost savings to system designers. The ARM11 MPCore processor also simplifies otherwise complex multiprocessor design, reducing time-to-market and total design cost.
The Mali GPU family scales from Mali-55, the world’s smallest OpenGL ES graphics processor to Mali-400 MP, the highest-performance embedded multicore GPU IP on the market which supports complex applications at up to 1080p high-definition resolution, thereby addressing the widest range of performance points for all embedded graphics needs. This diverse offering enables ARM to lead in conformance to numerous open standards and confirms the company’s unique position as a world-class supplier of the complete range of hardware and software graphics IP, enabling application developers and device manufacturers to create competitive and cutting-edge designs.
Mali graphics processors deliver stunning 2D and 3D graphics providing 4x and 16x full scene anti-aliasing (FSAA) without any noticeable drop in performance. In addition to providing content developers with the state-of-the-art programmable features in OpenGL ES 2.0, Mali products also support 2D scalable vector graphics through OpenVG for improved text, navigation, UI and web-browsing experiences.

Monday, June 15, 2009

New LCD technology for dramatically lower power


Sharp has developed a new LCD screen that is claims reduces power consumption by 130 times by adding memory to the column drivers.
The Memory LCD black and white screen is based on the company's proprietary Continuous Grain Silicon technology. Each pixel is equipped with memory circuitry to save the image information uploaded to the display so the image information has to be rewritten only in the pixels whereas the content has changed in comparison to the previous picture frame.
With common LCDs the microcontroller has to rewrite the complete screen content from frame to frame at a rate of 50 to 60 Hz even though most of the image content remains the same. The 1.35in Memory LCD consumes about 15 µW in operation whereas a standard LCD of comparable size needs about 2 mW to render an image.
This new type of LCD als does not need polarisers, as it uses a special liquid crystal material where the image is generated by the status of the pixel just changing from black to white with a reflectivity of 50%.
Due to the low power consumption, small solar cells can provide enough electricity to drive Memory LCDs. The new type of display is therefore an ideal solution for small size portable applications such as wrist watches, pulse meter and other fitness devices, price tags, etc. Such systems can even be designed as no-battery applications using solar cells as power supply.

Wednesday, June 10, 2009

Touch screen chip maker licenses ARM M0

Melfas, a Korean chipmaker, has licensed ARM's Coretex M-0 32bit core to upgrade from its 8bit 8051 core in a capacitive-sensing touch input chip.
Melfas has many years’ expertise in designing turnkey touch screen module solutions including controller IC, circuitry, driver software, and patterned ITO panel with window lens and test system. It has shipped over 40 million controller ICs since 2006. According to market research firm, DisplaySearch, the total touch screen module market will grow from $3.6 billion in 2008 to $9 billion by 2015, with a CAGR of 14 per cent.
"Our engineers were already familiar with the Keil software development tools, which support both 8051 and ARM Cortex-M0 processor-based devices," said D.J. Min, VP Engineering, Melfas. "We were able to quickly and easily evaluate the new processor using our existing 8051 code base. The results demonstrated that we could halve the flash memory requirement using the Cortex-M0 processor, and reduce the MHz requirement by 5x, saving power.”

The deal is a good one for ARM as it drives high volume royalties.
“The use of touch screen controllers in products ranging from mobile phones, personal media players, digital cameras, navigation devices, to home appliances is rapidly increasing. The Cortex-M0 processor’s energy efficiency and small size make it particularly suited for these applications,” said Eric Schorn, VP marketing, Processor Division, ARM. “The agreement with Melfas is a further endorsement of the Cortex-M family of low power processors and ARM physical IP, and demonstrates ARM’s low power leadership.”

The Cortex-M0 processor is the lowest power and smallest 32-bit ARM processor. It offers an optimal blend of ultra low-power, energy efficiency and low gate count, with binary upwards compatibility with the higher performance ARM Cortex-M3. This makes it an ideal next step for embedded applications that outgrow legacy 8-bit microcontrollers, skipping the need for 16-bit devices.
Based in Seoul, Korea, Melfas was set up in 2000 with a mission to make electronics friendly and smart. Melfas developed its first semiconductor fingerprint sensor in 2003 and its first touch sensor chip in 2005, and early this year announced it had shipped 40 million touch sensor chips.

Satellite M2M from Digi deal


Digi International has entered the market for satellite machine-to-machine (M2M) links with the $3m acquistion of the assets of Indian company MobiApps.
MobiApps employs 63 people in India, Singapore, and the US with a vast majority based in its India headquarters in Bangalore with a strong technology and product position using the Orbcomm satellite system.
"Our wireless M2M customers are increasingly asking for satellite as a communications option to complete their coverage model," said Joe Dunsmore, Chairman, President, and CEO of Digi. "We’re looking forward to moving MobiApps products into Digi’s strong global sales and distribution network. We believe satellite M2M will be a high growth opportunity for the foreseeable future."

MobiApps recently introduced a new generation of products based on its own custom designed and patented mixed signal ASIC chip, which dramatically reduces the complexity and improves performance of satellite M2M system solutions such as fleet management, marine vessel tracking, container tracking, agricultural monitoring, energy management, and remote field service applications.
Digi expects to immediately functionally integrate MobiApps with current MobiApps CEO Taroon Kamdar facilitating the integration process with the Digi management team over the next several months.

Saturday, June 06, 2009

USB3.0 shipment starts

NEC Electronics starts shipping the industry's first Universal Serial Bus (USB) host controller (part number µPD720200) for the SuperSpeed USB 3.0 standard (see TI below, which ships at the end of the year).
The µPD720200 device is a host controller for PCs and other digital devices, and is based on the new version of the SuperSpeed USB standard that supports transfer speeds of up to 5Gbit/s. This aims the part not only at PCs but also digital TVs and DVD recorders, transferring 25 GBytes of video content on a blu-ray disc in 70s, compared to 14 minutes to transfer the same content when using the high-speed USB 2.0 with 480 Mbit/s transfer.
Perhaps surprisingly, NEC has been leading in USB chips, shipping the world's first USB 2.0-compliant host controller in 2000.
NEC Electronics expects the market for USB 3.0 to begin a rapid expansion, with monthly production expected to reach approximately 1,000,000 units in September 2009. It intends to market the $15 µPD720200 controller aggressively, and to offer a range of related products by incorporating USB 3.0 communications as an IP (intellectual property) core function in various application specific ICs.