All the latest quantum computer articles

See the latest stories on quantum computing from eeNews Europe

Thursday, December 10, 2009

First Cortex-M0 microcontroller starter kit

$139 starter kit for popular low cost microcontroller



IAR Systems has developed what it believes to be the world's first commercial starter kit for ARM Cortex-M0-based microcontrollers for the NXP LPC1114.
One of the features which enabled the speedy development of this kit was the fact that the NXP LPC11xx Cortex-M0 family is 100% pin compatible with the NXP LPC13xx Cortex-M3 family. "This kit is proof of that concept. We were able to re-use 100% of the design from our recently released LPC1343 kit," said Sara Skrtic, Development Kits Manager at IAR Systems. Both the Cortex-M0, and Cortex-M3 processor families are supported by the new competitively priced IAR Embedded Workbench for ARM Cortex-M toolchain.
"Ease of development and migration path within the two compatible families is the main theme at NXP" says Geoff Lees, General Manager, Microcontroller Division, NXP. "We see this as true compatibility, not just peripheral compatibility between an older 8-bit core, and a different 32-bit architecture. We are extremely pleased with IAR Systems' commitment to our new Cortex-M0 family, and are very confident of their success with this kit."
The KickStart Kit for LPC1114 contains all the necessary hardware and software for engineers to quickly design, develop, integrate and test Cortex-M0 applications. The NXP LPC111x family of devices are low-cost 32-bit MCUs designed for 8/16-bit applications and offer good performance, low power consumption, a simple instruction set and memory addressing together with small code size.
It includes a development board fitted with the LPC1114 microcontroller, an 8K KickStart edition of IAR Embedded Workbench for ARM, and a 20-state evaluation edition of IAR visualSTATE.
The board also provides debug support through IAR J-Link-OB, a standard JTAG connector or a small SWD connector. The board is powered via the USB interface, removing the need for any external power supply. It also provides some user configurable devices such as a small LCD, buttons and LEDs, analogue trim wheel, buzzer and a prototyping area. In addition, the UART pins are routed to a DB9 connector.
The J-Link-OB is a small board mounted JTAG/SWD debug interface that connects via USB to the PC host running Windows. It integrates into IAR Embedded Workbench, an Integrated Development Environment with a complete and easy-to-use set of C/C++ cross compiler and debugger tools for professional embedded applications. It contains project manager, editor, linker and librarian tools, C-SPY debugger, full integration with IAR J-Link, complete upgrade path available from IAR Systems. IAR visualSTATE is a UML-compliant graphical design environment for reactive systems, with advanced formal verification and validation tools as well as a very powerful code generator.

Microtune plans DAB SDR chip

Microtune is planning to develop a version of its software defined radio chip for the DAB standard used across Europe.
The current version supports AM/FM and HD radio but not DAB, making it a potial problem for equipment makers for the European market. The problem is that some key European countries such as Germany use the higher frequency L band. THis can be supported with a separate receiver chip, linked to the same disgial signal processor chip, still reducing the complexity and bill of materials, but not as much as a fully integrated solution.
"We have a tuner subsystem that's a discrete solution that sends data to the same DSP and the DAB data is demodulated in software on that DSP," said Peter Kipfelsberger, automotive marketing director at Microtune. "For L band it needs to be a separate tuner IC and that makes it difficult from a tuner perspective. But we are targetting a similar solution and we expect volumes to increase over the next year and we have plans to design a similar product for DAB."

SDR comes to radio and TV


Microtune has developed a chip architecture that brings Software Defined Radio (SDR) to car radios.
The MT3511 RF MicroDigitizer provides a flexible RF front end for many different standards and is coupled with a digital signal processor for a low cost implemention in a car radio.
For automotive manufacturers, software defined radio (SDR) represents a revolutionary approach to in-vehicle car entertainment, connectivity and multimedia. It enables them to flexibly deliver the most popular consumer features ­AM/FM, digital radio, CD audio, MP3 playback, navigation, as well as connectivity for iPod®, SD card, USB and Bluetooth by using common hardware that is configurable, scalable and upgradable via software. SDR solutions dramatically change ‘infotainment’ business, design and manufacturing models. This technology offers car makers a global radio platform, increased design flexibility, substantial cost-efficiencies and a future-proof migration path to new standards and enhanced features.
The MT3511 is a key front-end component in the SDR architecture. It combines the functions of a state-of-the-art RF tuner and an advanced analogue-to-digital converter in a single miniature chip­it receives and tunes a broadcast signal from a car antenna, and then converts the signal from analog to digital format for processing in software by a DSP or multimedia processor. It also supports world-standard AM/FM, HD Radio technology, digital radio mondiale (DRM), and weather band, and a DAB version with support for the higher frequency L band is being considered.
The advantage is that it replaces multiple hardware-specific components in today’s radio subsystem with a generic hardware platform that reduces design complexity, time-to-market, time-to-qualification and costs.
“For decades, leading automotive manufacturers and Tier-1 suppliers have used Microtune radio and TV tuners to migrate compelling consumer-class entertainment to the car,” said James Fontaine, President and CEO of Microtune. “We are now introducing a single-chip RF-to-digital converter that will help drive software defined radio throughout the auto industry as a practical mainstream technology. The MT3511 will be a key enabler for the future of in-vehicle audio and multimedia, while it fuels growth and opportunity for our Company across the worldwide automotive entertainment markets.”
“Software defined radio has been the holy grail of the automotive industry,” said Paul O’Donovan, analyst, Gartner Research. “While car makers have been eager to deploy the SDR concept, the baseline hardware technology required to navigate commercial cost sensitivities and the stringent automotive quality and manufacturing requirements has not been available. Modern multimedia or DSP processors are now increasing in computer power, allowing the complete processing of radio signals in software, while providing the necessary connectivity features. SDR applications also demand a new kind of front-end technology, such as the MT3511, that can receive and digitize radio broadcast signals across the fast-changing signal environment of the moving vehicle.”

Key Features

The MT3511 is characterized by very high RF-to-bits performance, a high level of integration, low cost and very low profile. With its high sensitivity, high linearity, and configurable, fully autonomous automatic gain control circuit, the MT3511 is engineered to deliver stable, clear digital intermediate frequency (IF) signals. It offers the system designer the flexibility to configure solutions for even the most challenging reception environments, while enabling high-quality radio sound and multimedia within the SDR system.
As a key feature, the MT3511 is optimized to work in the digital domain of the SDR architecture and supports on-board designs with minimal external components. It is engineered to support block-oriented processing, and combined with a patented approach for generating a manageable data rate, it frees the microprocessor to focus on other tasks, including display, connectivity, traffic management and GPS. In effect, the MT3511 enables the microprocessor to manage its resources more effectively and efficiently, a key factor in overall SDR performance.

Other features include:
· Very low phase noise
· Fully-autonomous tuning-control engine
· Integrated high-performance 16-bit ADC with self-calibration and digital error correction
· Automatic data synchronization for FM phase-diversity applications
The MT3511 is the first member of the Automotive RF MicroDigitizer family, and future products will support new digital standards with even higher levels of integration. A complete technical description is provided in the MT3511 Product Brief.
As with Microtune’s other automotive products, the MT3511 is engineered to operate in the harsh vehicular environment, meeting the unique challenges of temperature and long product-life times as compared to consumer products. Developed to meet stringent automotive specifications, it supports temperatures from -40 to +85°C, and is designed to be qualified according to the requirements of the Automotive Electronics Council (AEC) Q100.
The MT3511 is currently sampling to key customers and is priced at $3.50 in volumes of 100,000/year.

$2 TV chip

It has also developed world-standard radio frequency (RF)-to-baseband IC, based on the new architecture. The MT3141 single chip enables TV manufacturers to use a smaller, higher-performance and more cost-effective receiver across their next-generation global digital television designs. Using Microtune’s MT3141, manufacturers can build thinner, lighter digital TVs that deliver premium performance for all brands, models, price points and screen sizes.
The MT3141 is:
· A miniaturized RF-to-baseband single chip that combines the functions of an RF tuner, analog TV demodulator, intermediate frequency (IF) filters and amplifiers in a 6 mm x 6 mm IC.
· The only receiver engineered to exceed the RF performance requirements of worldwide analog/digital broadcast and cable standards*, including those for China’s new CTTB (also known as DTMB or DMB-T) and Europe’s next-generation DVB-T2 requirements.
· Tiny enough for the lightest ‘picture on a wall’ TVs, but packs the performance to put a superb TV picture on the biggest wide screen.

At $2.00 in high volumes, the MT3141 breaks through price, performance and size barriers to enable TV manufacturers finally to deploy an advanced silicon receiver in an unified high-quality front-end across all next-generation television platforms.

“Faced with increasing complexity, shrinking ASPs, divergent broadcast standards, and the need to differentiate, TV manufacturers have been looking for a new class of world-standard electronics,” said James Fontaine, President and CEO of Microtune. “Yet across all these factors, manufacturers and consumers are driven by TV picture quality. With our MT3141, manufacturers can drive world-class receiver performance into global TVs, while reducing their footprint, design effort and manufacturing costs.”

Mr. Fontaine added, “Our highly integrated receiver provides the compelling price/performance to finally fuel the TV industry migration from traditional can tuners to silicon solutions, while taking digital TV into the future.”

Unmatched Performance Based on MicroCeiver™ Architecture
Based on new MicroCeiver technology, the MT3141 is a complete RF analog and digital signal processing system in a single chip. It fuses RF tuner, analog video demodulation, filter and amplifier capabilities together, erasing the distinctions across these functional boundaries. The M3141 employs internal techniques and proprietary algorithms to continuously update information about signal conditions across the signal path, optimizing performance across the entire receiver chain.

Key performance metrics include:

* Typical noise figure: 3 dB
* Video signal to noise ratio: greater than 60 dB
* Typical sensitivity ATSC: -88 dBm
* DVB-T desired to undesired signal: exceeds NorDig 2.1 specifications by greater than 10 dB

The MT3141 receiver delivers excellent sensitivity and superior adjacent channel rejection, technical metrics that directly translate into an increase in digital TV signal coverage for broadcasters and high-quality, stable TV reception for TV viewers.

MT3141 Receiver: Dramatic Integration and Cost Reduction
A single chip, the MT3141 receives all frequencies in the 44 MHz to 1.0 GHz range. It converts a selected channel either to a low-IF or to a standard IF between 4 MHz and 57 MHz, and it outputs filtered audio (SIF) and baseband video (CVBS) signals. It is characterized by a very high level of integration with minimal external bill of materials that require no active components. The MT3141 virtually eliminates an external bill of materials.

The MT3141 complies with worldwide broadcast standards* and is engineered to exceed all performance requirements published for them, including those for legacy analog TV reception (NTSC, PAL and SECAM analog television signals for off-air and cable). The transition to digital broadcast around the world is expected to continue through at least 2018. For more technical information about the MT3141, please read the MT3141 Product Brief.

Price and Availability
Offered in a 6.0 mm x 6.0 mm 40-pin QFN package, the MT3141 tuner is available now to early access customers and is priced at $2.00 in high volume. To simplify evaluation and design for qualified customers, Microtune offers a MicroCeiver MT3141 evaluation board and reference design.

VIA chipset for DDR3 all-in-one PCs

Blu-ray playback, DX10.1 graphics and DDR3 memory support



VIA Technologies is set to push the adoption of next generation high speed DDR3 memory in all-in-one and embedded PCs with a new low power chipset.
The VIA VN1000 digital media chipset features the ChromotionHD 2.0 video processor to guarantee smooth playback of the latest Blu-ray titles with superb hardware acceleration of the most demanding H.264, WM9 and VC1 codecs over the latest display technologies, including Display Port and HDMI.
“The VIA VN1000 leverages our optimized VIA Nano 3000 Series processors, creating the most balanced, power-efficient, multimedia-focused desktop platform on the market today,” said Richard Brown, VP International Marketing at VIA. “Supporting the latest system memory, graphics and entertainment standards, the VIA VN1000 takes the VIA processor platform to new heights of power-efficient visual sophistication.”
At the core of the VIA VN1000 lies a DirectX 10.1 graphics engine, a necessary requirement for users who want to enjoy the enhanced features of the Windows 7 desktop environment. The DirectX 10.1 engine means that Windows 7 can employ Microsoft’s advanced Windows Desktop Driver Model 1.1, bringing significant gains in system memory efficiency, overall desktop responsiveness and an improved visual experience compared to WDDM 1.0.
Paired with the new VIA VT8261 south bridge, the VIA VN1000 represents the most power-efficient DX10.1 compliant digital media chipset on the market, consuming up to 12 watts for both north and south bridges, making it a perfect choice for Windows 7 based mini desktop and all-in-one desktop PCs designs.
The VN1000 supports DDR3 system memory at speeds of up to 1066MHz, one x8 lane and four x1 lane PCI Express II expansion slots, up to five PCI slots and a VIA Vinyl HD 8 channel audio codec. An IDE controller, support for up to four S-ATA II drives, SD/MMS/MMC card reader support and 12 USB 2.0 ports are supplemented with support for PS/2, SPI, GPIO and LPC technologies.
The VN1000 Digital Media IGP Chipset is fully compatible with all VIA Nano, VIA C7, VIA C7-M and VIA Eden processors and supports all Microsoft Windows platforms and popular Linux distributions.

Wednesday, December 02, 2009

Global automotive telematics market to quadruple

Boom time as 68m cars ship with telematics by 2016



Global shipments of automotive telematics systems are set to rise to 84.4 million units in 2016, up by a factor of more than four from 19.3 million in 2008, according to iSuppli.
“From sending out an automatic distress call after a car crash, to enabling remote diagnosis of engine troubles, telematics can provide enormous benefits to motorists and car makers around the world,” said Anna Buettner, analyst with iSuppli’s automotive research service. “For drivers, telematics can enhance safety, convenience and connectivity. For car OEMs, telematics can add to and improve car functionality and reduce warranty and after-sales costs. That’s why carmakers and consumers are expected to increase their adoption of telematics systems rapidly during the next seven years.”
By 2016, 68.4 million cars will ship with telematics systems installed by OEMs, up from 14.3 million in 2008. This means that 84.6 percent of all cars shipped in 2016 will incorporate telematics systems.
Aftermarket shipments of telematics systems will rise to just under 16 million units in 2016, up from slightly less than 5 million in 2008.
Beyond accident alerts and remote diagnosis, telematics functions span from the wireless integration of third-party devices, to navigation and Location-Based Services (LBS) updates, to theft detection, to engine control software revisions.
The United States is the world’s leading market for telematics in 2009, with 30 percent of all models sold in the country available with installed systems. In comparison, the next two biggest telematics nations, Germany and Italy, have only 20 percent model availability of installed telematics systems.
The U.S. leadership is due to General Motors (GM), which pioneered installed telematics in 1996 with its OnStar service. The company has made OnStar a standard feature on all its cars this year.
“With GM selling 2 million cars with installed telematics per year, competitors have been forced to react,” Buettner said. “In the intervening years, Ford, BMW, Mercedes-Benz, Honda, Nissan and Toyota all launched telematics systems.”
Western European telematics volume remains low because no major OEM in the region has made the feature standard on every car. Japan also is deploying telematics in low volumes, and the applications are focused on navigation functionality and infotainment.
However, as telematics becomes more available in other regions, U.S. domination will dwindle. The United States in 2009 accounts for about half of the global installed OEM telematics market. By 2016, the United States will account for about one third of the worldwide market as shipments in other regions soar.

Embedded v. mobile device telematics

Two major types of telematics solutions are being offered on the market: embedded systems, whose functionality is integrated into the headunit of cars; and mobile-device oriented systems, which use a wireless product like a cell phone to communicate information.
Both embedded and mobile device telematics systems are on rapid growth paths. Worldwide OEM embedded telematics systems will grow from nearly 4.8 million units in 2008 to more than 26.8 million systems in 2016.
Meanwhile, global OEM mobile device telematics systems will grow from 9.5 million units in 2008 to more than 41.5 million systems in 2016.

Netbook on a credit card with world’s first i.MX51 DIMM module

Runs Windows CE and Linux, measures only 67.6 x 26 x 4.2 mm



Strategic Test has developed the world’s first Freescale i.MX51 processor-based System on Module (SOM). The TX51 measures just 67.6 x 26 x 4.2 mm (2.6” x 1” x 0.16”) and contains an ARM8 Cortex 800 MHz i.MX51 processor coupled with 128 MB mobile DDR-SDRAM, 128 MB NAND Flash memory and a 200-pin SODIMM connector, giving it the power of today's netbooks in a credit card format.
The i.MX51 multimedia applications processors offer high performance processing optimized for the lowest power consumption for smartbooks, netbooks, and other consumer and industrial applications including: portable media players, gaming consoles, secure handheld devices and applications requiring an advanced HMI. The TX51 is targeted at embedded multimedia applications where size, high-cpu performance and low power consumption are critical factors.
"Time to market is always important for developers, and especially so in the fast moving multimedia market. The TX51 module offers the performance, features and ease-of-use to slash development time,” said Bob Giblett, President of Strategic Test.
Key features include: LCD resolution up to 1280 x 768 pixels at 24 bpp, OpenGL ES 2.0 and OpenVG 1.1 hardware accelerators, Multi-format HD 720p video decoder and D1 video encoder engine, Camera interface, NEON SIMD media accelerator, Vector Floating Point Unit, High-speed USB 2.0 OTG and Host, 10/100 Mbps Ethernet. Interfaces include: UART(3), SDIO(2), SSI/AC97/I2S(2), I2C, CSPI, Keypad, External memory interface.
The TX51 is pin-compatible with the existing i.MX27 and I.MX25 processor-based modules. The modules can be supplied with the Development Kit-5 hardware reference platform that includes support for Microsoft Windows Embedded CE 6.0 and Linux 2.6.
The TX51 module accepts an input voltage from various sources:
1-cell Li-Ion/Polymer (3.0V to 4.2V)
5.0V USB supply or AC wall adapter
3.3V
The TX51 is priced at 159 Euro in quantities from 1 to 249 and is sampling from January 2010. Production volumes will be available in Q1/2010.

Tuesday, December 01, 2009

WiFi and Coldfire on embedded tower development system

Modular development platform helps save months of development time through rapid prototyping and tool re-use



Freescale Semiconductor has launched a rapid evaluation and prototyping development system with two interchangeable peripheral modules and 8- and 32-bit microcontroller (MCU) modules for the Tower System.
The advanced peripheral modules offer developers 802.11b Wi-Fi and rapid prototyping functionality while the newest MCU modules support Freescale’s MCF5225X 32-bit ColdFire MCU and MC9S08LL64 8-bit MCU.
"With the addition of these advanced modules for Freescale’s Tower System, we are providing designers, students and hobbyists an affordable development system that’s modular and expandable,” said Aiden Mitchell, director of Freescale’s Industrial & Multi-Market Microcontroller business. “The Tower system, in conjunction with Freescale MQX software, is the ultimate enablement solution – giving designers an array of building blocks for entry-level to advanced processor development and helping speed time to market.”
The Tower System provides a comprehensive and highly customisable embedded design environment that allows developers to mix and match MCU and peripheral boards to create reconfigurable development platforms that suit their design needs. Interchangeable modules promote reuse of hardware across multiple architectures, which helps speed time to market. The modular design scales down overall tool costs, while providing an inexpensive entry point.

Advanced MCU modules

The Tower System now supports two advanced microcontroller modules: the TWR-MCF5225X and the TWR-S08LL64, featuring the ColdFire V2 MCF5225X MCU and the 8-bit MC9S08LL64 MCU, respectively. These modules can be combined with various peripheral modules to form a unique Tower System development tool or used as standalone debug tools.
The TWR-MCF5225X offers a powerful and flexible industrial connectivity solution with on-chip USB, Ethernet, controller area network (CAN) and encryption, along with the Freescale MQX real time operating system and associated tools and software stacks. The 8-bit MC9S08LL64 MCU includes an on-chip LCD driver that supports up to eight backplanes, enabling developers to drive more segments with fewer pins, reducing system cost and design complexity. The S08LL family supports an LCD blink mode that operates without waking up the controller core, which helps reduce overall power consumption.
These advanced modules complement the previously announced TWR-MCF51CN Ethernet MCU module.

WiFi peripheral modules

The Wi-Fi module (TWR-ZGWIFI) adds 802.11b Wi-Fi functionality to the Tower System and includes the ZeroG Systems ZG2100 Wi-Fi I/O module and antenna, as well as configuration jumpers and an RS232 debug port. The embedded Wi-Fi module from ZeroG is optimised for embedded applications, with low data rates, power consumption and system resource requirements. The TWR-ZGWIFI module is FCC-certified and offers seamless integration with Freescale’s MQX software solution. With this module, developers can easily add Wi-Fi connectivity and run sample applications using the kit in less than a few hours.
The prototyping module (TWR-PROTO) allows designers to quickly add custom circuitry and build custom prototype boards with application-specific features. With ample perfboard area, this cost-effective module is ideal for hardware development and testing during system design.
These two peripheral modules complement the previously announced serial module (TWR-SER), supporting Ethernet, USB, RS232, RS485 and CAN, and elevator modules (TWR-ELEV) that connect the MCU and peripheral boards.
The Tower System’s easy-to-use, modular design helps customers control tool costs, from simple concept testing to full product development. A single MCU/MPU module serves as the main control board. Modules simply plug into backplane boards, called “elevators,” through standard PCB edge connectors. Peripheral board re-use eliminates the need to buy and develop redundant hardware, which reduces future costs. In addition, the MCU modules include open-source background debug mode (OSBDM) hardware, allowing each board to serve as a standalone debug tool.
Tower modules are currently available for MCF51CN, MCF5225X and MC9S08LL64 MCUs. In future months, Freescale and its partners plan to provide Tower System support for additional embedded devices, including other ColdFire MCUs, 8-bit MCUs and digital signal controllers (DSCs).
* The TWR-MCF5225X MCU module is available for a suggested resale price of $49
* The TWR-S08LL64 MCU module is available for a suggested resale price of $69
* The TWR-ZGWIFI and TWR-PROTO modules are available now for a suggested resale price of $59 and $14.99, respectively.
* The TWR-MCF5225X-KIT includes the TWR-SER and TWR-ELEV modules and is available for a suggested resale price of $119.
* The TWR-S08LL64-KIT includes the TWR-PROTO and TWR-ELEV modules and is available for a suggested resale price of $99.


Thursday, November 26, 2009

Printable programmable logic


Nano ePrint in Manchester has secured a grant for Research and Development from the UK's Northwest Regional Development Agency (NWDA) for a £390k project to demonstrate the world's first printed programmable logic device.
This will be based on developments led by Ian Barton, previously Managing Director of Silistix, who joined Nano ePrint as Vice President of Engineering in May. Ian brings significant experience in the management of integrated circuit design and is leading Nano ePrint's engineering team in the design and production of printed programmable logic devices. Silistix, another spinout of the University of Manchester, develops network on chip technology.
Nano ePrint was formed in 2006 following pioneering research at the University of Manchester in the UK that allows planar nanoelectronic circuits to be built in a single layer of semiconductor via single-step patterning. Nano ePrint’s devices achieve very high speeds while dramatically reducing circuit size and simplifying manufacture. Nano ePrint has also developed a configurable circuit architecture to deliver the world’s first printed programmable logic circuits, allowing one design to simultaneously address multiple applications, opening up prospects in low-cost, high-performance printed electronics across a wide range of markets.

First 1.1in QVGA LED display

OKI Digital Imaging has developed a 1.1 inch QVGA LED display while reducing power consumption to one-tenth that of conventional LCDs.
This is the direct result of development in its LED print head technology that enhances luminance efficiency using an extension of its proprietary Epi Film Bonding technology into a two-dimensional array.
This array has the world’s first 65-micrometer pitch between LED chips to give a high definition image and, as it is self-illuminating, the new display has a faster response, smaller size and lower power than LCD displays that require a separate light source. It also features high contrast (over 5000:1) for high visibility even in bright daylight.
OKI Digital Imaging will manufacture the LED display at the LED manufacturing facility in Gunma prefecture, Japan, that it acquired from Reneasas back in July. Shipments of samples are expected to begin by the end of fiscal year 2010.
“The new technology has made it possible for us to develop a groundbreaking LED display that provides high definition images while maintaining compact dimensions,” said Hiroshi Kikuchi, President of OKI Digital Imaging. “The development of the world’s first thin-film-bonding technology in 2006 marked a significant milestone for the OKI Group. As shown by today’s announcement, that technology laid the foundations for continuing developments in LEDs. The OKI Group plans to leverage the expertise and technical knowledge accumulated over 20 years of experience with LED printing to develop new technologies in other areas and to expand its LED-related businesses.”

Altium targets Poland on software piracy

Design tool vendor Altium is targetting illegal use of its software specifically in Poland, offering an amnesty for just one month for existing users.

Sets December deadline for illegal users

“Piracy of Altium software, both of Altium Designer and older Protel software, is a known problem throughout Poland. With this programme, Altium helps illegal Protel users continue with their favourite EDA tool for another half a year without having to fear legal consequences,” said Jean-Paul Seuren, Licence Compliance Manager EMEA, Altium Europe.
“At the same time, and of much more value to these users, we will help them to move their old Protel projects and legacy data to Altium Designer. Designers will see the benefit from using this next-generation electronics design software and increase their competitiveness in the Polish and worldwide electronics design sector. This software amnesty programme helps illegal users take the first step to battle software piracy.”
Under the new scheme, companies doing electronics design can legalize their illegal copies of Altium’s Protel and Altium Designer software by buying the latest version of Altium Designer at a price of €3,200 that includes half a year amnesty for each legalized seat.
Earlier this year Altium lowered the pricing for Altium Designer to €3,200, a reduction of nearly 70% designed to make electronics design software affordable to every electronics designer. This highlights the key reason why designers were using the tools illegally. The amnesty programme extends that new pricing by adding the support Polish users need to become up-to-date in both compliance and their software.
During this amnesty period, designers can retain their illegal Protel seats to migrate their legacy data to Altium Designer. Altium will also provide free software assurance and support, webinars as well as special migration training. Users will receive an official certificate that enables them to use one unlicensed Protel seat legally for six months for each Altium Designer licence purchased.
Altium’s Value Added Reseller Evatronix SA, based in Bielsko-Biala, will be the local point of contact in Poland to facilitate the software amnesty programme.
Altium Designer is the successor of the well known and widely used Protel PCB design tool but takes a very new and different approach to electronics design. In a single solution, using a single data model, it lets designers create products in all three design domains: PCB layout, programmable hardware (using FPGAs) and software.

Lego robots at Robocon 2009

I can't resist robots, it's just the kid in me! The Annual Robocon Competition took place in Yokohama, Tokyo on November 18. 40 teams from all over the world were competing in various disciplines, including the LEGO MINDSTORMS, in which the Royal Danish Embassy in Tokyo sponsored one of the 'Innovation Prize' awards.

Wednesday, November 25, 2009

USB3 solid state disk from OCZ

New names in the industry are emerging with USB3.0 coming through (despite the problems at Intel) with OCZ Technology of San Jose teaming up with Symwave to show an external high speed solid state disk (SSD) drive.



Symwave is a fabless chip supplier of SuperSpeed USB3.0 devices with headquarters in Orange County, Calif., and design centers in Shenzhen, China, and San Diego, Calif. “Thanks to Symwave’s industry leading USB 3.0 storage controller, our external SSD device delivers 10x the transfer rate of USB 2.0 at 5Gb/s, as well as several ‘green’ improvements including superior power management and lower CPU utilization,” said Eugene Chang, Vice President of Product Management at the OCZ Technology Group. “OCZ’s products are synonymous with high performance. Combining our USB 3.0 controller with their SSD technology, both architected for performance without compromise, is a perfect match,” said John O’Neill, Vice President of Marketing at Symwave. “CES will be a showcase for new and innovative products that provide consumers with a dramatically improved user experience. Symwave is committed to delivering silicon and software solutions that will transform the way consumers view and use USB storage devices.”
Interestingly, Symwave has seen an investment by networking leader SMSC alongside venture capital firms including Kodiak Venture Partners and CMEA Ventures.

OCZ has just launched the Colossus 3.5” Solid State Drive (SSD) Series, designed to meet the performance and storage demands of high-end desktop users and enterprise clients. Available in up to one terabyte with RAID0 configurations, the Colossus Series marks a milestone in solid state drive technology, making it possible to have both high performance and high capacity in one solution.
“The new Colossus Series is designed to boost desktop and workstation performance and is for high power users that put a premium on speed, reliability and maximum storage capacity,” said Chang. “The Colossus core-architecture is also available to enterprise clients with locked BOMs (build of materials) and customized firmware to match their unique applications.”
The Colossus SSD is available in 128GB, 256GB, 512GB, and 1TB with 1.5 million hour mean time between failures (MTBF).

Atom moves into automotive

Kontron's Microspace MPCX28: in-vehicle PC with Intel Atom Z530 processor


Kontron has launched its first in-vehicle PC with extended support, based on the Intel Atom Z530 processor and Intel System Controller Hub US15W, with a flexible PC/104 socket for ultra flat and space-saving PC/104 expansion cards. Further options for customization include 2 PCIe Mini Card Slots for custom specific options such as GPS, GSM/UMTS, and WLAN.
Its fanless design, easy expandability and high flexibility make the precision Swiss-engineered Kontron Microspace MPCX28 Box PC a perfect fit for various applications in busses, cars, trucks, and (automated) heavy-duty vehicles used in intralogistics. In cabs and busses it can be used for passenger infotainment, video surveillance, or ticketing systems. Typical truck applications include CAN-based trailer and goods management, GPS navigation combined with communication via GSM, and UMTS/GPRS for fleet management. For vehicles used in intralogistics, the applications range from the control of automated vehicles, to logistics for forklift trucks with WLAN and barcode/RFID interfaces.
Designed to work in the extended temperature range -25 to 70°C, the passively cooled in-vehicle Kontron Box PC is based on the Intel Atom Z530 1.6 GHz processor with 533 MHz FSB and supports up to 1 GB DDR2 RAM. The embedded graphics feature 256MB of memory DirectX 9 3-D and HDTV support with MPEG2 and H.264 decoders to process compressed HD videos to offload CPU usage. To accommodate storage devices, it provides front side slots for a 2.5" SATA HDD or SDD and Compact Flash media. Thanks to the externally-accessible slots, the change of storage media is quick and simple without the use of tools. This makes it particularly easy to swap out the hard drive within seconds to provide new content for, e.g., infotainment applications. The internal PCI/104 and 2x PCIe MiniCard expansion slots allow for various application-specific extensions, such as Dual-CAN, GPS, GSM/UMTS, and WLAN.

Application specific expansions via ultra flat PC/104 extension cards

The Microspace MPCX28 also features a comprehensive set of interfaces to fulfill the demands of nearly all in-vehicle applications. On the front, two USB 2.0 interfaces and 3.5 mm jacks for stereo output and input are accompanied by a SIM slot for mobile communications. On the back, the new in-vehicle PC offers 2 x Gigabit Ethernet, 2 additional USB 2.0 ports, as well as an SATA port to connect additional storage devices. The DVI-I interface transmits analog or digital video signals to external monitors with a resolution of up to 2,048 x 1536. Two DSUB connectors for COM ports (RS232) and a parallel interface for digital I/O, which provide CAN-bus connectivity via an optional PCI/104 expansion card, round off the feature set.
With a wide-range power supply (8 to 58 VDC), the PC can be directly connected to the vehicle's power supply without additional converters. A plug-in power supply for 110/220 VAC is also available. The system supports remote power on/off and can accommodate customer-specific functions such as wake on ring, event wake up or a wake on LAN.
It is scheduled to be available (with CE and E1 certification) in Q1, 2010 and supports Windows XPe/XP/Vista/7, and Linux.

SME survey of UK companies

The UK's Electronics Leadership Council, distributor Premier Farnell and The UK Electronics Alliance are co-ordinating a survey to gain knowledge from technology-based SMEs on how to better advise government to direct the necessary support for greater economic growth.

The survey is here

All UK based small and medium enterprise (SME) technology companies are encouraged to take part in a survey through to 9th December 2009 developed to garner appropriate support from the UK Government and trade associations to ensure the necessary future economic growth for these SMEs.
The intent of the survey is to gain support to influence regulation and legislation that will encourage success for SMEs, ensuring their views are well understood by government as decisions are made. The findings will also be used to attract funding for business in the UK and develop targeted programmes that make a positive contribution. The ELC and UKEA have excellent lines of communication already established with government that will ensure the issues raised by the survey get directly to those most able to influence change.
A second stage of focus group consultation is planned in early 2010 involving interested survey participants. It is hoped that as many SME’s as possible will complete the initial survey to ensure it will be truly representative of opinion and make a powerful contribution towards shaping the decision making processes of government.
All participants in the survey will have the opportunity to receive a copy of the results once the survey is concluded. All trade associations that participate in the survey will also receive a final copy of the survey findings to distribute to their members.
“In recent months we have met with a number of key government leaders and industry bodies, all of whom want to stimulate growth, innovation and enterprise in the UK. Our industry is critical to leading the market out of the downturn and affecting change on a global scale as the pervasion of technology continues in every aspect of our lives,” said Harriet Green, CEO of Premier Farnell.

MEMS microphones for a dollar from ST and Omron deal

ST Microelectronics has teamed up with Omron to drive the cost of micromachined, highly integrated silicon MEMS microphones.
The deal will see the devices falling to under $1, says ST, using Omron's sensor technology. ST is already the leading supplier of MEMS for consumer and portable applications and the third largest MEMS manufacturer overall. , but will use Omron's MEMS sensor technology.
The key is that ST is the only manufacturer that can mount and package multiple MEMS microphone devices at a time, facilitating high-volume production, using a proven packaging technology very similar to that used for motion sensors.
MEMS microphones can be made smaller than the most compact microphones and are less susceptible to mechanical vibration, temperature variations and electromagnetic interference, which is important in cell phones and other devices with an audio input, such as notebook computers, video recorders, digital cameras, as well as hearing aids or electronic stethoscopes.
“In the past, microphones were the domain of expert acoustics companies, but now it’s time for semiconductor MEMS players to drive the growth of this market. We’re aiming to increase the size of the MEMS microphone market by an order of magnitude,” said Benedetto Vigna, Group Vice President and General Manager of MEMS and Healthcare Division, STMicroelectronics. “This market can explode only with big and long-term committed suppliers, operating their own leading-edge MEMS fabs. Working together with our Japanese friends, we'll drive the microphone market growth as we have done in motion sensors.”

Samples of digital MEMS microphones that integrate ST’s electronic control circuit and OMRON’s micro-machined sensor in a single package will be available before the end of this year, at less than one dollar for large-volume orders.
According to iSuppli’s research dated September 2009, the market for micro-machined acoustic devices for consumer electronics and mobile handsets is forecast to grow at a revenue CAGR of 18% between 2008 and 2013, when it will exceed one billion parts per year.
MEMS microphone startup Akustica was acquired earlier this year by Robert Bosch, while another MEMS startup, Oligon, was bought by Wolfson Microelectronics to develop a range of highly integrated microphones.

Tuesday, November 24, 2009

Instant products from rapid prototyping


Design tool vendor Altium has added an instant deployment option to its FPGA development board. Designers can now take their FPGA-based designs from concept right through to deployment without the need to create a custom PCB by clipping the NanoBoard 3000 into a new range of enclosures designed in-house by Altium.
The modular enclosures let designers deploy FPGA–based designs created and hosted on the NanoBoard 3000 in a number of different ways: on desks, on walls, in either commercial or industrial locations, in extended options for multiple board designs, with or without the TFT display that comes with the enclosures.
Instantly deploying the NanoBoard 3000 in the new modular enclosures gives designers the option of creating small production runs in commercially attractive cases, again without being compelled to manufacture custom enclosures or custom PCBs.
Altium’s NanoBoard 3000 is a programmable design environment supplied complete with hardware, software, ready-to-use, royalty-free IP and a dedicated Altium Designer Soft Design license. This is a complete design environment that lets electronics designers construct sophisticated ‘soft’ processor-based systems inside FPGAs without any prior FPGA expertise, specialist VHDL or Verilog skills. Designers simply use their existing board layout and systems design skills to construct, test and implement FPGA-based embedded systems. The supplied Altium Designer license lets them select, drag and drop the large range of IP blocks to add processors, memory controllers, peripherals and software stacks. Unlike alternative programmable design environments, designers no longer need to search the web for drivers, peripherals or other software, and then have the hard work of integrating all these elements to make them work together.
The new NanoBoard 3000 enclosures mean that designers can now start with a purely 'soft' prototype on the NanoBoard and then deploy it into the field. But Altium Designer’s unified architecture also gives them the option of upgrading to a board-level Altium Designer license and moving into custom PCB design. Their 'soft' design work completed on the NanoBoard 3000 is simply ready to be used on their custom PCB.
Weeks are saved on getting high-quality proof-of-concept prototypes designed without any custom PCB design work required at all. Newcomers to FPGA design have a low-risk, low-cost design environment that has everything they need to get started. Experienced FPGA designers can use their expertise in new ways to focus on creating the intelligence of their products.
Altium’s first NanoBoard 3000 features a Xilinx Spartan 3AN FPGA. Two more NanoBoards, featuring Altera and Lattice FPGAs, are in manufacture and design. The new deployment enclosures at Euro99 will accommodate all these NanoBoard options.
The NanoBoard 3000 is available for a recommended retail price of $295 and includes a 12-month subscription to the Altium Designer Soft Design License.

Friday, November 20, 2009

Namecalling Begins Around Intel's USB 3.0 Slowdown, Slapfight Imminent

Namecalling Begins Around Intel's USB 3.0 Slowdown, Slapfight Imminent

Posted using ShareThis

DDR3 memory transistion next year


Shipments of the next generation high speed, low power DDDR3 memory will rise to account for more than half of the global DRAM market by the second quarter of 2010, surpassing DDR2 for the first time as the leading technology for PC main memory says market researcher iSuppli. DDR3’s share of the DRAM market in terms of gigabit-equivalent shipments will rise to 50.9 percent in the second quarter of 2010, up from just 1 percent in the second quarter of 2008 and 14.2 percent in the second quarter of 2009. By the end of 2010, DDR3 will grow to account for 71 percent of shipments.
“DDR3 is 50 percent faster than today’s dominant DRAM technology, DDR2, while using about 30 percent less power,” said Mike Howard, senior DRAM analyst for iSuppli. “For PC users across the board, this means faster performance. For notebook users, it can result in longer battery life.”
Two major factors are driving the industry’s transition to DDR3: new Intel Corp. microprocessors and the increasing manufacturability of the part.
Intel’s latest-generation microprocessor microarchitecture, dubbed Nehalem, employs a memory controller that supports only DDR3, unlike the previous Penryn line, which works with both DDR2 and DDR3. With Intel transitioning its microprocessor line to Nehalem-based chips, PC makers will have no choice but to migrate to DDR3 SDRAM.
On the supply side, production of DDR3 has advanced to the point were memory makers can produce it at a competitive cost using leading-edge semiconductor process technology. Because of this, all major DRAM suppliers now are producing DDR3, making the memory more attractive to PC makers who are loathe to be beholden to a single source.
“With DDR3 commanding higher pricing than DDR2, memory makers realize where the big money will be in 2010,” Howard said. “Because of this, they are more than willing to transition production to the new memory technology.”
As availability has increased and prices for DDR3 have fallen, the cost of DDR2 to PC makers actually has risen in recent months because of supply constraints. And despite the rapid rise of DDR3, DDR2 is expected to command significant volumes throughout 2010, accounting for 15.4 percent of gigabit-equivalent shipments the fourth quarter.
For more information on this topic, see iSuppli’s new report: DDR2 to DDR3 – The Anatomy of a Technology Transition.

Thursday, November 19, 2009

Atom module adds dual GbE, SATA and PCIe


Anders Electronics in London has developed a module that uses Intel's Atom processor with two Gigabit Ethernet connections for faster connectivity. Measuring just 65x75mm, the new CM-iAM SoM (system-on-module) packs more features than any other Atom Z530 SoM - notably up to 2GB RAM, 4GB on-board Flash Disk, SATA interface, dual GbE, and up to 3 PCIe lanes.
Used as a building block for any embedded application, the CM-iAM packs up-to-date technologies into the most compact, lightweight PC-on-module available in the market.
With on-board resources that smoothly run Linux, Windows XP or Windows 7, the CM-iAM’s standard X86 architecture runs most software applications written for PCs. And, the CM-iAM’s credit-card sized board boasts a low power consumption of 4-6W, making it ideal for battery and “always on” applications.
The basic feature set of the CM-iAM includes a 32-bit X86-compatible Atom Z530 CPU (up to 1.6GHz), up to 2GB RAM, 4GB on-board Flash Disk, SATA interface, and a Micro-SD slot. The CM-iAM also offers multiple display interfaces (RGB, LVDS and SDVO), with resolutions of up to 1920x1200 – enabling it to run high the definition graphics needed for such applications as digital signage.
For embedded applications, the CM-iAM provides a variety of display interfaces, up to 3 PCIe lanes, dual GbE ports, an RS232 serial port, up to 15 GPIO lines and many other essential functions. The user interface is supported by an enhanced graphics controller, 6 USB 2.0 ports, and 5.1 channels audio codec (analog+S/PDIF or HDA output).
To enable quick evaluation of the CM-iAM in the full range of usage scenarios, the SoM ships with an advanced evaluation base-board, the SB-iAM. This evaluation kit features a wide range of extension and I/O interfaces – most notably PCI and PCIe slots, RGB, LVDS, DVI and CRT display, and digital, analog and optical audio.
“Anders has always attempted to keep our clients on the cutting edge of technology,” said Rob Anders, CEO of Anders Electronics. “The CM-iAM is a true first – the smallest and most cost-effective SoM on the market, that doesn’t compromise on processing power or featureset."

National Instruments expands HIL


National Instruments is extending its hardware-in-the-loop (HIL) simulation platform, which includes a range of products that optimise embedded system validation. During the past six months, NI has released nearly 40 new products targeted at delivering flexible HIL solutions to embedded control system developers within a variety of industries. The portfolio of NI HIL simulation tools helps engineers maintain reliability and time-to-market requirements while reducing costs, even as their products become more complex.
“We continually hear that engineers are struggling with traditional test systems to meet increasing product complexity and performance requirements within tight budgets and timelines,” said Mike Santori, Business and Technology Fellow at National Instruments. “These engineers need an HIL simulation platform that is highly productive out of the box but also open and flexible to adapt to fast-changing testing demands. The NI HIL simulation platform provides unprecedented openness and performance for HIL applications. The platform’s highly flexible architecture helps engineers address a wide range of applications, from those in automotive and aerospace to new fields such as alternative energy and medical device development.”

Recent product releases include NI VeriStand software for real-time testing and simulation; the NI TestStand 4.2 automated test management environment including support for Python scripts; a new family of fault insertion units; NI-XNET high-performance CAN and FlexRay bus interfaces optimised for HIL applications; ARINC 429, MIL-STD-1553 and AFDX (ARINC 663) military and aerospace avionics bus interfaces; low-cost and high-performance real-time processor cards; and several other I/O interfaces. To ensure that applications can easily scale and meet evolving requirements, the NI HIL simulation platform supports third-party hardware interfaces and integrates with C, C++, .NET and Python programming languages. In addition to integrating seamlessly with the NI LabVIEW graphical system design environment, the platform works with a variety of modeling environments such as Simulink software; ITI SimulationX; Maplesoft MapleSim; and Gamma Technologies GT-POWER.
Engineers can increase their system performance and flexibility while reducing overall costs by taking advantage of the open PXI hardware standard, advanced multicore technology and graphically programmed FPGA interfaces. Additionally, the platform’s software-defined instrumentation approach makes it possible for HIL applications created with NI products to scale from low-cost desktop validation systems to multiprocessor distributed simulators, a benefit that provides engineers a flexible and cost-effective toolset for all HIL testing applications.
The platform delivers commercial off-the-shelf (COTS) solutions that offer alternatives to complex proprietary configurations and bulky, inefficient traditional simulation systems. In today’s challenging economic climate, NI HIL simulation products are ideal for making projects more efficient and cost-effective for design engineers in multiple industries, from aerospace, alternative energy, automotive and consumer electronics to government, industrial transportation, mechatronics, medical technology and semiconductor manufacturing.