GE Fanuc Intelligent Platforms is to use Freescale’s multicore QorIQ processors in forthcoming products. QorIQ processors feature up to eight cores for maximum performance, and allow GE Fanuc to develop new platforms that will be form-, fit- and function compatible with their PowerPC predecessors and enable existing customers to take advantage of exciting new levels of performance at minimal cost. These new platforms will also allow lower power consumption and heat dissipation per unit of performance.
The QorIQ technology will be used in GE Fanuc’s VME-based, 3U VPX-based, 6U VPX-based and 3U CompactPCI-based families of single board computers. Support for both the eight core P4080 QorIQ processor and the dual core P2020 processor is also planned. All products based on QorIQ technology will be available in five ruggedization levels – including full conduction cooling over the -40°C to +85°C range - to meet the demanding requirements of military customers.
“We have been developing Power Architecture products since the early 1990s,” said Peter Cavill, General Manager, Military & Aerospace Products, GE Fanuc Intelligent Platforms. “Since then, we have followed up with a growing family of Power Architecture platforms that have enabled our customers to take advantage of the latest processing technologies, keeping their systems at the leading edge of performance with minimum integration effort, and minimizing long term cost of ownership.”
“One of the QorIQ-based products we will introduce will be pin-compatible with the PPC2A – a product we announced in 1997,” he continued. “That’s a powerful demonstration of how we help protect our customers against obsolescence. We expect that this new generation of single board computers will also provide compelling price/performance advantages for new customers.”
The P4080 processor is rated at less than 30 watts and combines eight Power Architecture e500mc cores operating at frequencies up to 1.5 GHz. The P2020 core operates at up to 1.2GHz and Freescale believes this is ideal for applications that have tight thermal constraints.
All the latest quantum computer articles
See the latest stories on quantum computing from eeNews Europe
Thursday, June 25, 2009
Monday, June 22, 2009
Multicore TVs: LG signs ARM
LG Electronics, one of the world’s largest digital TV brands, has licensed multicore processor and graphics technology from ARM for its next generation of digital TVs.
LG will use the ARM11 MPCore multicore processor to target a range of platforms with the same architecture simply by implementing single or multiple SMP cores. It will also use ARM Mali-200 and Mali-400 MP graphics processors for 1080p resolution displays for home cinema experience that includes high-definition graphics, whilst vastly improving the browsing experience on DTV user interfaces.
This will also be used to support a full Web 2.0 experience from their DTVs with Adobe and Open source software platforms and the emergence of tru2way technology for interactive cable services, including video-on-demand, voting and polling, games, and e-commerce without the need for a separate set-top box. Additionally, manufacturers are striving to build intelligent AV processing and develop home devices that are more energy efficient.
The market proven ARM11 MPCore synthesizable multicore processor provides a scalable solution that addresses the requirements of multiple designs. Devices can be configured to contain between one and four processors delivering up to an aggregate 5000 Dhrystone MIPS of performance at 1GHz while providing existing software portability across single CPU and multi-CPU designs. The ARM11 MPCore processor provides the memory throughput required of data intensive applications while delivering greater performance at lower frequencies than comparable single processor designs, so offering significant cost savings to system designers. The ARM11 MPCore processor also simplifies otherwise complex multiprocessor design, reducing time-to-market and total design cost.
The Mali GPU family scales from Mali-55, the world’s smallest OpenGL ES graphics processor to Mali-400 MP, the highest-performance embedded multicore GPU IP on the market which supports complex applications at up to 1080p high-definition resolution, thereby addressing the widest range of performance points for all embedded graphics needs. This diverse offering enables ARM to lead in conformance to numerous open standards and confirms the company’s unique position as a world-class supplier of the complete range of hardware and software graphics IP, enabling application developers and device manufacturers to create competitive and cutting-edge designs.
Mali graphics processors deliver stunning 2D and 3D graphics providing 4x and 16x full scene anti-aliasing (FSAA) without any noticeable drop in performance. In addition to providing content developers with the state-of-the-art programmable features in OpenGL ES 2.0, Mali products also support 2D scalable vector graphics through OpenVG for improved text, navigation, UI and web-browsing experiences.
LG will use the ARM11 MPCore multicore processor to target a range of platforms with the same architecture simply by implementing single or multiple SMP cores. It will also use ARM Mali-200 and Mali-400 MP graphics processors for 1080p resolution displays for home cinema experience that includes high-definition graphics, whilst vastly improving the browsing experience on DTV user interfaces.
This will also be used to support a full Web 2.0 experience from their DTVs with Adobe and Open source software platforms and the emergence of tru2way technology for interactive cable services, including video-on-demand, voting and polling, games, and e-commerce without the need for a separate set-top box. Additionally, manufacturers are striving to build intelligent AV processing and develop home devices that are more energy efficient.
“By licensing ARM technologies, LG Electronics will be able to offer a future-proofed premium-quality digital TV experience for today’s connected home,” said Seung-Jong Choi, research fellow of Digital TV Lab, LG Electronics. “The connected home relies on technology that is fully functional and that guarantees a high-quality, energy efficient multimedia experience. With Web 2.0 requirements moving into a connected and high definition home, LG Electronics has selected the ARM architecture to guarantee longevity for our own technology.”
The market proven ARM11 MPCore synthesizable multicore processor provides a scalable solution that addresses the requirements of multiple designs. Devices can be configured to contain between one and four processors delivering up to an aggregate 5000 Dhrystone MIPS of performance at 1GHz while providing existing software portability across single CPU and multi-CPU designs. The ARM11 MPCore processor provides the memory throughput required of data intensive applications while delivering greater performance at lower frequencies than comparable single processor designs, so offering significant cost savings to system designers. The ARM11 MPCore processor also simplifies otherwise complex multiprocessor design, reducing time-to-market and total design cost.
The Mali GPU family scales from Mali-55, the world’s smallest OpenGL ES graphics processor to Mali-400 MP, the highest-performance embedded multicore GPU IP on the market which supports complex applications at up to 1080p high-definition resolution, thereby addressing the widest range of performance points for all embedded graphics needs. This diverse offering enables ARM to lead in conformance to numerous open standards and confirms the company’s unique position as a world-class supplier of the complete range of hardware and software graphics IP, enabling application developers and device manufacturers to create competitive and cutting-edge designs.
Mali graphics processors deliver stunning 2D and 3D graphics providing 4x and 16x full scene anti-aliasing (FSAA) without any noticeable drop in performance. In addition to providing content developers with the state-of-the-art programmable features in OpenGL ES 2.0, Mali products also support 2D scalable vector graphics through OpenVG for improved text, navigation, UI and web-browsing experiences.
Monday, June 15, 2009
New LCD technology for dramatically lower power
Sharp has developed a new LCD screen that is claims reduces power consumption by 130 times by adding memory to the column drivers.
The Memory LCD black and white screen is based on the company's proprietary Continuous Grain Silicon technology. Each pixel is equipped with memory circuitry to save the image information uploaded to the display so the image information has to be rewritten only in the pixels whereas the content has changed in comparison to the previous picture frame.
With common LCDs the microcontroller has to rewrite the complete screen content from frame to frame at a rate of 50 to 60 Hz even though most of the image content remains the same. The 1.35in Memory LCD consumes about 15 µW in operation whereas a standard LCD of comparable size needs about 2 mW to render an image.
This new type of LCD als does not need polarisers, as it uses a special liquid crystal material where the image is generated by the status of the pixel just changing from black to white with a reflectivity of 50%.
Due to the low power consumption, small solar cells can provide enough electricity to drive Memory LCDs. The new type of display is therefore an ideal solution for small size portable applications such as wrist watches, pulse meter and other fitness devices, price tags, etc. Such systems can even be designed as no-battery applications using solar cells as power supply.
Wednesday, June 10, 2009
Touch screen chip maker licenses ARM M0
Melfas, a Korean chipmaker, has licensed ARM's Coretex M-0 32bit core to upgrade from its 8bit 8051 core in a capacitive-sensing touch input chip.
Melfas has many years’ expertise in designing turnkey touch screen module solutions including controller IC, circuitry, driver software, and patterned ITO panel with window lens and test system. It has shipped over 40 million controller ICs since 2006. According to market research firm, DisplaySearch, the total touch screen module market will grow from $3.6 billion in 2008 to $9 billion by 2015, with a CAGR of 14 per cent.
The deal is a good one for ARM as it drives high volume royalties.
The Cortex-M0 processor is the lowest power and smallest 32-bit ARM processor. It offers an optimal blend of ultra low-power, energy efficiency and low gate count, with binary upwards compatibility with the higher performance ARM Cortex-M3. This makes it an ideal next step for embedded applications that outgrow legacy 8-bit microcontrollers, skipping the need for 16-bit devices.
Based in Seoul, Korea, Melfas was set up in 2000 with a mission to make electronics friendly and smart. Melfas developed its first semiconductor fingerprint sensor in 2003 and its first touch sensor chip in 2005, and early this year announced it had shipped 40 million touch sensor chips.
Melfas has many years’ expertise in designing turnkey touch screen module solutions including controller IC, circuitry, driver software, and patterned ITO panel with window lens and test system. It has shipped over 40 million controller ICs since 2006. According to market research firm, DisplaySearch, the total touch screen module market will grow from $3.6 billion in 2008 to $9 billion by 2015, with a CAGR of 14 per cent.
"Our engineers were already familiar with the Keil software development tools, which support both 8051 and ARM Cortex-M0 processor-based devices," said D.J. Min, VP Engineering, Melfas. "We were able to quickly and easily evaluate the new processor using our existing 8051 code base. The results demonstrated that we could halve the flash memory requirement using the Cortex-M0 processor, and reduce the MHz requirement by 5x, saving power.”
The deal is a good one for ARM as it drives high volume royalties.
“The use of touch screen controllers in products ranging from mobile phones, personal media players, digital cameras, navigation devices, to home appliances is rapidly increasing. The Cortex-M0 processor’s energy efficiency and small size make it particularly suited for these applications,” said Eric Schorn, VP marketing, Processor Division, ARM. “The agreement with Melfas is a further endorsement of the Cortex-M family of low power processors and ARM physical IP, and demonstrates ARM’s low power leadership.”
The Cortex-M0 processor is the lowest power and smallest 32-bit ARM processor. It offers an optimal blend of ultra low-power, energy efficiency and low gate count, with binary upwards compatibility with the higher performance ARM Cortex-M3. This makes it an ideal next step for embedded applications that outgrow legacy 8-bit microcontrollers, skipping the need for 16-bit devices.
Based in Seoul, Korea, Melfas was set up in 2000 with a mission to make electronics friendly and smart. Melfas developed its first semiconductor fingerprint sensor in 2003 and its first touch sensor chip in 2005, and early this year announced it had shipped 40 million touch sensor chips.
Satellite M2M from Digi deal

Digi International has entered the market for satellite machine-to-machine (M2M) links with the $3m acquistion of the assets of Indian company MobiApps.
MobiApps employs 63 people in India, Singapore, and the US with a vast majority based in its India headquarters in Bangalore with a strong technology and product position using the Orbcomm satellite system.
"Our wireless M2M customers are increasingly asking for satellite as a communications option to complete their coverage model," said Joe Dunsmore, Chairman, President, and CEO of Digi. "We’re looking forward to moving MobiApps products into Digi’s strong global sales and distribution network. We believe satellite M2M will be a high growth opportunity for the foreseeable future."
MobiApps recently introduced a new generation of products based on its own custom designed and patented mixed signal ASIC chip, which dramatically reduces the complexity and improves performance of satellite M2M system solutions such as fleet management, marine vessel tracking, container tracking, agricultural monitoring, energy management, and remote field service applications.
Digi expects to immediately functionally integrate MobiApps with current MobiApps CEO Taroon Kamdar facilitating the integration process with the Digi management team over the next several months.
Saturday, June 06, 2009
USB3.0 shipment starts
NEC Electronics starts shipping the industry's first Universal Serial Bus (USB) host controller (part number µPD720200) for the SuperSpeed USB 3.0 standard (see TI below, which ships at the end of the year).
The µPD720200 device is a host controller for PCs and other digital devices, and is based on the new version of the SuperSpeed USB standard that supports transfer speeds of up to 5Gbit/s. This aims the part not only at PCs but also digital TVs and DVD recorders, transferring 25 GBytes of video content on a blu-ray disc in 70s, compared to 14 minutes to transfer the same content when using the high-speed USB 2.0 with 480 Mbit/s transfer.
Perhaps surprisingly, NEC has been leading in USB chips, shipping the world's first USB 2.0-compliant host controller in 2000.
NEC Electronics expects the market for USB 3.0 to begin a rapid expansion, with monthly production expected to reach approximately 1,000,000 units in September 2009. It intends to market the $15 µPD720200 controller aggressively, and to offer a range of related products by incorporating USB 3.0 communications as an IP (intellectual property) core function in various application specific ICs.
The µPD720200 device is a host controller for PCs and other digital devices, and is based on the new version of the SuperSpeed USB standard that supports transfer speeds of up to 5Gbit/s. This aims the part not only at PCs but also digital TVs and DVD recorders, transferring 25 GBytes of video content on a blu-ray disc in 70s, compared to 14 minutes to transfer the same content when using the high-speed USB 2.0 with 480 Mbit/s transfer.
Perhaps surprisingly, NEC has been leading in USB chips, shipping the world's first USB 2.0-compliant host controller in 2000.
NEC Electronics expects the market for USB 3.0 to begin a rapid expansion, with monthly production expected to reach approximately 1,000,000 units in September 2009. It intends to market the $15 µPD720200 controller aggressively, and to offer a range of related products by incorporating USB 3.0 communications as an IP (intellectual property) core function in various application specific ICs.
Thursday, June 04, 2009
Intel buys Wind River
Intel is making a serious play into the truly embedded market with a $884m deal to buy real time operating system (RTOS) company Wind River Systems.
The board of directors of Wind River has unanimously approved the transaction which is expected to close this summer and then Wind River will report into Intel's Software and Services Group, headed by Renee James.
This is a key part of Intel's strategy to grow its processor and software presence outside the traditional PC and server market segments into embedded systems and mobile handheld devices, and Wind River is already a close partner with Intel, making use of its hardware virtualisation technology.
Wind River will become a wholly owned subsidiary of Intel and continue with its current business model.
"This acquisition will bring us complementary, market-leading software assets and an incredibly talented group of people to help us continue to grow our embedded systems and mobile device capabilities," said James at Intel. "Wind River has thousands of customers in a wide range of markets, and now both companies will be better positioned to meet growth opportunities in these areas."
"As a wholly owned subsidiary, Wind River will more tightly align its software expertise to Intel's platforms to speed the pace of progress and software innovation," said Ken Klein, Wind River Chairman, president and CEO. "We remain committed to continuing to provide leading solutions across multiple hardware architectures and delivering the same world-class support to which our customers have grown accustomed."
The acquisition will deliver to Intel robust software capabilities in embedded systems and mobile devices, from in-car "info-tainment" systems and other automotive areas, networking equipment, aerospace and defence to energy and thousands of other devices.
The board of directors of Wind River has unanimously approved the transaction which is expected to close this summer and then Wind River will report into Intel's Software and Services Group, headed by Renee James.
This is a key part of Intel's strategy to grow its processor and software presence outside the traditional PC and server market segments into embedded systems and mobile handheld devices, and Wind River is already a close partner with Intel, making use of its hardware virtualisation technology.
Wind River will become a wholly owned subsidiary of Intel and continue with its current business model.
"This acquisition will bring us complementary, market-leading software assets and an incredibly talented group of people to help us continue to grow our embedded systems and mobile device capabilities," said James at Intel. "Wind River has thousands of customers in a wide range of markets, and now both companies will be better positioned to meet growth opportunities in these areas."
"As a wholly owned subsidiary, Wind River will more tightly align its software expertise to Intel's platforms to speed the pace of progress and software innovation," said Ken Klein, Wind River Chairman, president and CEO. "We remain committed to continuing to provide leading solutions across multiple hardware architectures and delivering the same world-class support to which our customers have grown accustomed."
The acquisition will deliver to Intel robust software capabilities in embedded systems and mobile devices, from in-car "info-tainment" systems and other automotive areas, networking equipment, aerospace and defence to energy and thousands of other devices.
Wednesday, June 03, 2009
Netbooks - the next generation
Freescale has been working on new form factors for the next generation of netbooks - story and more pictures at The PortableMultiMedia blog
Android moves into home equipment
MIPS Technologies has ported Google's Android operating system to its processor cores, aiming to drive the software, and Web applications, into more areas such as digital TV and set top boxes.
With Android and the open source development community around it, developers can easily and quickly create new applications and OEMs can leverage the growing set of applications for their devices, says MIPS. With the MIPS ecosystem around Android, OEMs will be able to quickly optimize Android for their specific platforms.
MIPS Technologies is establishing development tools and system integration partnerships with service providers to help its licensees with porting, integration, and testing. Partnerships initially include those with Embedded Alley and Viosoft.
Embedded Alley, a leading provider of embedded Linux solutions, is offering support for SoC implementations from MIPS Technologies’ licensees. The Embedded Alley Development System for Android-based Devices includes processor and board support as well as a version of the Android Dalvik virtual machine (VM) optimized for the MIPS instruction set and CPU cores; extending the Android bionic library, linker and other software infrastructure for the MIPS architecture; and providing integration and testing board support industry-specific device drivers, CODECs and other middleware. Embedded Alley is already enabling Android on devices built with the Alchemy Processor family from RMI—providing an Android-ready Linux kernel for RMI Au1250 and the Embedded Alley Development System for Alchemy reference platforms.
Viosoft Corporation is a key partner for MIPS based software development tools. Viosoft’s Arriba tools deliver comprehensive support for single and multi-core platforms. The tools support Android, and are available today.
With Android and the open source development community around it, developers can easily and quickly create new applications and OEMs can leverage the growing set of applications for their devices, says MIPS. With the MIPS ecosystem around Android, OEMs will be able to quickly optimize Android for their specific platforms.
"In the future, almost every consumer device will be connected to the Internet and its wide array of content," said Rich Wawrzyniak, senior analyst for ASIC and SoC at Semico Research Corporation. "Leveraging Android to quickly and easily bring new and innovative applications and user interfaces to devices beyond the mobile phone is a very appealing proposition for consumers. Android also removes applications from their ties to specific hardware systems and opens the market for companies like MIPS Technologies to move into new market segments. I can understand why MIPS’ partners and licensees are excited about Android on MIPS. It is a potential game changer."
MIPS Technologies is establishing development tools and system integration partnerships with service providers to help its licensees with porting, integration, and testing. Partnerships initially include those with Embedded Alley and Viosoft.
Embedded Alley, a leading provider of embedded Linux solutions, is offering support for SoC implementations from MIPS Technologies’ licensees. The Embedded Alley Development System for Android-based Devices includes processor and board support as well as a version of the Android Dalvik virtual machine (VM) optimized for the MIPS instruction set and CPU cores; extending the Android bionic library, linker and other software infrastructure for the MIPS architecture; and providing integration and testing board support industry-specific device drivers, CODECs and other middleware. Embedded Alley is already enabling Android on devices built with the Alchemy Processor family from RMI—providing an Android-ready Linux kernel for RMI Au1250 and the Embedded Alley Development System for Alchemy reference platforms.
“Embedded Alley and MIPS Technologies have been working closely to deliver value to our mutual customers,” said Matthew Locke, COO, Embedded Alley. “Following the success of Android in the mobile phone market, many companies have been looking at the potential of Android beyond mobile handsets, but it just wasn’t clear how to make Android a reality for other types of devices. Embedded Alley, together with MIPS -- a strong leader in the digital home marketplace -- has determined what it will take, and we are making it happen. We are enabling OEMs and developers to create new Android-based designs."
Viosoft Corporation is a key partner for MIPS based software development tools. Viosoft’s Arriba tools deliver comprehensive support for single and multi-core platforms. The tools support Android, and are available today.
“The MIPS architecture has consistently delivered high-performance Linux platforms with low power consumption, making it ideal for VM-based environments such as Android,” said Art Lee, vice president of business development, Viosoft Corporation. “To enable the porting, debugging and deployment of the Android platform on MIPS, Viosoft provides a set of unique and very powerful tools that dramatically reduce development time, risk and costs. Working closely with MIPS Technologies, we are focused on helping OEMs quickly and easily bring their Android platforms to market.”
Wednesday, May 13, 2009
USB3.0 test chip from TI
Texas Instruments has developed a new 5Gbit/s transceiver test chip designed to the USB3.0 specification version 1.0 as part of the SuperSpeed USB promoters group. The new transceiver is capable of driving and receiving signals over 4m USB3.0 cables to ensure data integrity. This transceiver will be demonstrated at the USB Developers Conference in Tokyo, Japan on May 21-22.
The new SuperSpeed USB transceiver, with intellectual property (IP) for a digital controller from design tool vendor Synopsys, tested successfully at the USB-IF SuperSpeed Peripheral Interoperability Lab.
The test chip includes an integrated spread spectrum PLL, support for multiple input reference frequencies: 20 MHz, 25 MHz, 30 MHz and 40 MHz, PIPE3 and ULPI compliant interfaces and programmable transmitter pre-emphasis. These save system cost by eliminating the need for an external spread spectrum clocking device and give interoperability across a wide selection of ASIC / FPGA platforms eases designs by allowing designers to work with the same USB device, regardless of the processor platform.
The first of TI's SuperSpeed USB family of devices, the TUSB1310, SuperSpeed USB transceiver, will sample by the end of the year with volume production in the first quarter of 2010
USB3.0
The most obvious change in SuperSpeed USB versus USB 2.0 high-speed is the over 10X speed increase from 480 Mbps to 5 Gbps. There are many applications for which the USB connection is becoming the bottleneck and, as with the introduction of USB 2.0 high-speed, SuperSpeed USB will inspire the creative minds in the industry to develop new, emerging applications and end-equipment that will benefit from the higher performance. The 5Gbit/s data rate should provide headroom for the next 5 years.
In addition to the increase in speed, the physical layer electrical signaling has changed from the simple two-wire system to a dual-simplex data path. This is done over a completely different set of connections than the existing USB 2.0 two-wire interface, which remains untouched. In addition, it was mandatory that the any changes in the electrical signaling scheme NOT drive the need for a new forma factor plug or receptacle on the host, and if possible, on the peripheral as well. In order to minimize the risk, the promoters group determined that creating the new signaling scheme to be very similar to PCI Express could meet the goals. This also allows the connection to retain sideband functionality without additional wires and allow for receiver termination for connect/disconnect detection.
One of the other key changes was to focus on improving the power efficiency of the bus. This is ideal for extending the battery life for portable devices, whether hosts (notebook PCs) or peripherals. The specification defines excellent power characteristics, especially for idle links. Both Upstream and Downstream ports can initiate lower power states of the link. There is also local power management control using multiple link power states defined to further improve the power use efficiency. In addition, another power saving method was to eliminate all polling of devices.
The new SuperSpeed USB transceiver, with intellectual property (IP) for a digital controller from design tool vendor Synopsys, tested successfully at the USB-IF SuperSpeed Peripheral Interoperability Lab.
“Demonstrating interoperability between Synopsys’ DesignWare SuperSpeed USB digital controller and TI’s USB transceiver gives designers confidence that the IP functions successfully in a real-world system environment,” said John Koeter, vice president of marketing for the Solutions Group at Synopsys. “Synopsys and TI are working together to help advance new technology into the market quickly, while minimizing risk and speeding time-to-market.”
The test chip includes an integrated spread spectrum PLL, support for multiple input reference frequencies: 20 MHz, 25 MHz, 30 MHz and 40 MHz, PIPE3 and ULPI compliant interfaces and programmable transmitter pre-emphasis. These save system cost by eliminating the need for an external spread spectrum clocking device and give interoperability across a wide selection of ASIC / FPGA platforms eases designs by allowing designers to work with the same USB device, regardless of the processor platform.
The first of TI's SuperSpeed USB family of devices, the TUSB1310, SuperSpeed USB transceiver, will sample by the end of the year with volume production in the first quarter of 2010
USB3.0
The most obvious change in SuperSpeed USB versus USB 2.0 high-speed is the over 10X speed increase from 480 Mbps to 5 Gbps. There are many applications for which the USB connection is becoming the bottleneck and, as with the introduction of USB 2.0 high-speed, SuperSpeed USB will inspire the creative minds in the industry to develop new, emerging applications and end-equipment that will benefit from the higher performance. The 5Gbit/s data rate should provide headroom for the next 5 years.
In addition to the increase in speed, the physical layer electrical signaling has changed from the simple two-wire system to a dual-simplex data path. This is done over a completely different set of connections than the existing USB 2.0 two-wire interface, which remains untouched. In addition, it was mandatory that the any changes in the electrical signaling scheme NOT drive the need for a new forma factor plug or receptacle on the host, and if possible, on the peripheral as well. In order to minimize the risk, the promoters group determined that creating the new signaling scheme to be very similar to PCI Express could meet the goals. This also allows the connection to retain sideband functionality without additional wires and allow for receiver termination for connect/disconnect detection.
One of the other key changes was to focus on improving the power efficiency of the bus. This is ideal for extending the battery life for portable devices, whether hosts (notebook PCs) or peripherals. The specification defines excellent power characteristics, especially for idle links. Both Upstream and Downstream ports can initiate lower power states of the link. There is also local power management control using multiple link power states defined to further improve the power use efficiency. In addition, another power saving method was to eliminate all polling of devices.
Monday, March 30, 2009
Motorola launches high speed M2M modem
Motorola has launched a high speed Machine-to-Machine (M2M) modem that uses the HSPA protocol for 3.5G connectivity. The HSPA series of modules is comprised of the H24-Global, providing tri-band HSPA connectivity (850/1900/2100MHz); H24-Single (2100MHz); and H24-NA (850/1700/1900MHz).
The new H24 module provides HSUPA/HSDPA connectivity at 5.76Mbit/s upstream and 7.2Mbit/s downstream, enabling true mobile broadband for next generation M2M solutions like automotive infotainment systems, fixed-wireless terminals, telemetry, and advanced security systems featuring real-time video surveillance. The H24 also has on-board GPS capabilities making it the ideal solution for location-based applications. In addition, the H24 includes receiver diversity for optimal performance under harsh network conditions as well as FOTA (firmware over the air), to ensure maximum reliability.
The H24 is built in the same compact form factor as the rest of the Motorola "24" family of wireless modules to provide flexibility with a single design solution. As the entire H24 series includes quad-band GSM/GPRS and EDGE connectivity, customers can easily add HSPA connectivity to their existing G24 GSM-based solution by integrating the H24.
The new H24 module provides HSUPA/HSDPA connectivity at 5.76Mbit/s upstream and 7.2Mbit/s downstream, enabling true mobile broadband for next generation M2M solutions like automotive infotainment systems, fixed-wireless terminals, telemetry, and advanced security systems featuring real-time video surveillance. The H24 also has on-board GPS capabilities making it the ideal solution for location-based applications. In addition, the H24 includes receiver diversity for optimal performance under harsh network conditions as well as FOTA (firmware over the air), to ensure maximum reliability.
The H24 is built in the same compact form factor as the rest of the Motorola "24" family of wireless modules to provide flexibility with a single design solution. As the entire H24 series includes quad-band GSM/GPRS and EDGE connectivity, customers can easily add HSPA connectivity to their existing G24 GSM-based solution by integrating the H24.
"The H24 HSPA module enables the M2M industry to take advantage of global 3.5G network deployment," said Shamai Wasserman, vice president, Motorola Israel & Director of Motorola Wireless Modules business unit. "The addition of 3.5G HSPA technology to the "24" family of wireless modules expands on Motorola's commitment to supporting all air interfaces with a single form factor."
Ultrasound cost reduction technology
Texas Instruments (TI) is targetting the low cost, portable ultrasound equipment market with an embedded processor software toolkit to encourage more flexible ultrasound equipment in clinics rather than just in hospitals. This is the first in a family of products to help manufacturers quickly and easily develop ultrasound applications on the improved processing power of TI’s C64x+ DSP platforms.
The Embedded Processor Software Toolkit (STK) for medical diagnostic ultrasound makes use of the performance, flexibility and power consumption of TI’s C64x+ architecture to shorten the development time of an ultrasound system by providing optimized implementations of commonly used processing blocks.
TI is also offering the TMS320C6455 DSP Starter Kit (DSK) for medical imaging, a low-cost development platform which provides manufacturers with an easy-to-use solution for evaluating DSP algorithms, reducing medical imaging product development time.
The C64x+ kit contains:
* Optimized software modules of common ultrasound processing
blocks
* Complete source code for all modules affords developers full
visibility and enables module customization and differentiation.
* Well defined APIs simplify development by abstracting modules and
enabling easy integration into existing systems.
* Complete benchmarks allow for quick and easy evaluation of module
implementation and comparisons to other architectures.
* Full test benches provide assurance of module functionality while
aiding in evaluation and development. Custom test vectors can easily be
added to check functional and cycle performance for any input.
* Full documentation of each optimized module provides coding
illustrations on computational optimization methods for the C64x+ core
which can be used as a model to optimize other code modules.
* One year of support and release patches include up-to-date releases
and support by TI’s applications team over the next 12 months.
The Embedded Processor Software Toolkit (STK) for medical diagnostic ultrasound makes use of the performance, flexibility and power consumption of TI’s C64x+ architecture to shorten the development time of an ultrasound system by providing optimized implementations of commonly used processing blocks.
TI is also offering the TMS320C6455 DSP Starter Kit (DSK) for medical imaging, a low-cost development platform which provides manufacturers with an easy-to-use solution for evaluating DSP algorithms, reducing medical imaging product development time.
The C64x+ kit contains:
* Optimized software modules of common ultrasound processing
blocks
* Complete source code for all modules affords developers full
visibility and enables module customization and differentiation.
* Well defined APIs simplify development by abstracting modules and
enabling easy integration into existing systems.
* Complete benchmarks allow for quick and easy evaluation of module
implementation and comparisons to other architectures.
* Full test benches provide assurance of module functionality while
aiding in evaluation and development. Custom test vectors can easily be
added to check functional and cycle performance for any input.
* Full documentation of each optimized module provides coding
illustrations on computational optimization methods for the C64x+ core
which can be used as a model to optimize other code modules.
* One year of support and release patches include up-to-date releases
and support by TI’s applications team over the next 12 months.
"Over the next few years, we anticipate a significant shift in medical
imaging applications from traditional imaging modalities limited to
basic diagnostic functions to a new ecosystem comprised of small form
factor, highly accurate portable devices, ” said Susie Inouye, research
director and president, Databeans. “It is clear that manufacturers
seeking to design more flexible, affordable and portable ultrasound
equipment can benefit from the low power, high-performance and flexible
programmability of TI’s digital signal processors.”
Altera and National get closer on automotive
Altera has teamed up with National Semiconductor on the transmission, processing and display of digital data in automotive applications in a first step to closer cooperation.
The two have developed a reference design for graphics interconnect to run digital video in automotive infotainment and driver-assistance applications, using Altera's low-cost Cyclone 3 FPGAs and National's FPD-Link 2 embedded clock serialiser/deserialiser (SERDES). This should provide higher bandwidth over longer range with less cabling and lower electromagnetic interference (EMI), as well as increased reliability and lower system costs.
This reference design shows the transmission of a digital video bitstream over a 10-meter CAT6 cable to National's DS90C124 FPD-Link 2 deserializer. The deserializer output interfaces directly to a Cyclone 2 FPGA, which processes the incoming signals and sends the resulting video to a display.
The two have developed a reference design for graphics interconnect to run digital video in automotive infotainment and driver-assistance applications, using Altera's low-cost Cyclone 3 FPGAs and National's FPD-Link 2 embedded clock serialiser/deserialiser (SERDES). This should provide higher bandwidth over longer range with less cabling and lower electromagnetic interference (EMI), as well as increased reliability and lower system costs.
This reference design shows the transmission of a digital video bitstream over a 10-meter CAT6 cable to National's DS90C124 FPD-Link 2 deserializer. The deserializer output interfaces directly to a Cyclone 2 FPGA, which processes the incoming signals and sends the resulting video to a display.
"National has a proven track record for enabling the high-speed data link between video source and sink in automotive applications," said Erroll Dietz, vice president of National's High-Speed Product Division. "Our expertise in mixed-signal IC design, video transport, signal integrity and automotive qualification processes has made National's FPD-Link 2 SERDES products the first choice among major OEMs and tier-1 suppliers for point-to-point data transfer. Altera's proficiency in embedded digital video processing is a natural complement to National's FPD-Link II SERDES. Our shared customers are well positioned to benefit from our strategic collaboration, which is fueled by strong growth in embedded video for infotainment and driver-assist applications."
"This work with National represents the first in a multi-step collaboration between the two companies to facilitate the routing of high-resolution digital video within automotive applications," said Michael Samuelian, director of Altera's automotive and industrial business unit. "Our experience in processing automotive video, graphics and human-machine interfaces combined with National's widely deployed FPD-Link 2 SERDES family delivers automotive manufacturers a proven solution for deploying digital video in their next-generation vehicles."
Thursday, March 05, 2009
Wind River Linux runs on FPGA processor
This is an interesting move - Wind River's Linux is now available on Altera's Nios II embedded processor which can sit in low cost FPGAs.
Wind River's Linux solution for the Nios II processor is based on Linux 2.6 kernel technology, the GNU 4 tool chain and the Eclipse-based Wind River Workbench Development Suite, customised for the Nios II instruction set, the processor architecture and the custom instructions feature that can be implemented in the FPGA fabric to increase system performance.
"Together, Altera and Wind River have brought Linux support to the Nios II embedded processor on FPGAs," said Mike Langlois, general manager of networking solutions at Wind River. "Our customers can leverage a flexible hardware and software solution to create and bring to market faster, highly differentiated systems. The fact that the Nios II processor can run on all of Altera's FPGAs and HardCopy ASICs to enable a broad spectrum of solutions is well-matched to the needs of our customers who are looking to differentiate on price and performance."
A reference design based on the low cost Cyclone III FPGA provides a fully timing-constrained and performance-optimized processor subsystem design with a Nios II/f core and a number of common system peripherals such as Ethernet, timer and UART. A matching board support package (BSP) and a pre-built Linux kernel for this hardware platform give application developers a familiar and stable environment to jumpstart their application development effort. The same processor system reference design can target any FPGA or HardCopy ASIC in Altera's product portfolio.
"As more customers adopt FPGA platforms to create product differentiation in ever bigger and more sophisticated systems, their software development needs increase and evolve," said Danny Biran, senior vice president of product and corporate marketing at Altera. "Our relationship with Wind River provides us with a partner who can support the broad and diverse needs of our global customers, and whose breath and depth of software expertise complements our hardware expertise."
The Linux distribution, a Nios II/f-based processor-system reference design, and a BSP for the Altera Cyclone III FPGA Development Kit are available from Wind River.
Wind River's Linux solution for the Nios II processor is based on Linux 2.6 kernel technology, the GNU 4 tool chain and the Eclipse-based Wind River Workbench Development Suite, customised for the Nios II instruction set, the processor architecture and the custom instructions feature that can be implemented in the FPGA fabric to increase system performance.
"Together, Altera and Wind River have brought Linux support to the Nios II embedded processor on FPGAs," said Mike Langlois, general manager of networking solutions at Wind River. "Our customers can leverage a flexible hardware and software solution to create and bring to market faster, highly differentiated systems. The fact that the Nios II processor can run on all of Altera's FPGAs and HardCopy ASICs to enable a broad spectrum of solutions is well-matched to the needs of our customers who are looking to differentiate on price and performance."
A reference design based on the low cost Cyclone III FPGA provides a fully timing-constrained and performance-optimized processor subsystem design with a Nios II/f core and a number of common system peripherals such as Ethernet, timer and UART. A matching board support package (BSP) and a pre-built Linux kernel for this hardware platform give application developers a familiar and stable environment to jumpstart their application development effort. The same processor system reference design can target any FPGA or HardCopy ASIC in Altera's product portfolio.
"As more customers adopt FPGA platforms to create product differentiation in ever bigger and more sophisticated systems, their software development needs increase and evolve," said Danny Biran, senior vice president of product and corporate marketing at Altera. "Our relationship with Wind River provides us with a partner who can support the broad and diverse needs of our global customers, and whose breath and depth of software expertise complements our hardware expertise."
The Linux distribution, a Nios II/f-based processor-system reference design, and a BSP for the Altera Cyclone III FPGA Development Kit are available from Wind River.
Wittenstein moves open source to microcontrollers...
Wittenstein High Integrity Systems has launched a fully integrated version of its OpenRTOS kernel with USB and FAT file system capability to reduce development times.
The real time OS, based on the FreeRTOS but with support, is designed to run efficiently on the new generation of small and medium 32bit microcontrollers, with the initial release supporting the NXP LPC2xxx, ARM 7 and Freescale Coldfire V2 architectures. The product shortens development time for applications using USB or flash memory considerably.
OpenRTOS CONNECT is a high performance middleware platform based on, and compatible with, FreeRTOS, the world’s favourite open-source microcontroller RTOS, which has a large, rapidly growing embedded developer community. Users are able control costs, developing projects on the free kernel and migrating to OpenRTOS later in the development cycle. OpenRTOS is commercially licensed and supported, easy to use, memory efficient and optimised for 32-bit controllers.
It provides a full featured FAT 12/16/32 based, DOS compatible file system designed for embedded applications requiring PC compatible media, for example SD and other common flash based devices. A lightweight file system version is also available for configurations with limited resources. The USB host, device and class drivers support all four USB transfer types and enables the development of embedded applications fully compliant with USB 1.1 and USB 2.0.
The real time OS, based on the FreeRTOS but with support, is designed to run efficiently on the new generation of small and medium 32bit microcontrollers, with the initial release supporting the NXP LPC2xxx, ARM 7 and Freescale Coldfire V2 architectures. The product shortens development time for applications using USB or flash memory considerably.
OpenRTOS CONNECT is a high performance middleware platform based on, and compatible with, FreeRTOS, the world’s favourite open-source microcontroller RTOS, which has a large, rapidly growing embedded developer community. Users are able control costs, developing projects on the free kernel and migrating to OpenRTOS later in the development cycle. OpenRTOS is commercially licensed and supported, easy to use, memory efficient and optimised for 32-bit controllers.
It provides a full featured FAT 12/16/32 based, DOS compatible file system designed for embedded applications requiring PC compatible media, for example SD and other common flash based devices. A lightweight file system version is also available for configurations with limited resources. The USB host, device and class drivers support all four USB transfer types and enables the development of embedded applications fully compliant with USB 1.1 and USB 2.0.
... as it ports SafeRTOS to highly integrated Luminary controller
Wittenstein High Integrity Systems has ported its SafeRTOS embedded kernel to the Luminary Micro Stellaris ARM Cortex-M3™-based microcontrollers, including the new highly integrated LM3S9000 series.
The release by Wittenstein enables high integrity application development on the ‘most integrated’ embedded microcontrollers on the market. The product greatly reduces the time and risk associated with obtaining FDA510(k) and IEC61508 certification through Wittenstein’s Design Assurance Pack.
Developed specifically for applications such as medical and industrial devices, SafeRTOS has been independently certified by TÜV SÜD, as having been developed in compliance with IEC61508 SIL3, and uses a compiler independent methodology.
SafeRTOS, a finalist at the Elektra Awards 2008 Embedded Product of the Year, was originally developed from the popular and robust open source kernel, FreeRTOS. Migration from FreeRTOS to SafeRTOS enables costs to be controlled during development.
Luminary Micro’s Chief Marketing Officer Jean Anne Booth said, “Stellaris microcontrollers are widely used in medical and industrial devices, and we are seeing a growing demand for certification in these markets. The launch by Wittenstein vastly simplifies what can otherwise be a complex task.”
Discussing the forthcoming announcement, FreeRTOS creator and Wittenstein’s Head of Innovation, Richard Barry, said, “Luminary is an exciting innovator in the ARM space and we are delighted about this early collaboration on the new flagship Stellaris microcontrollers.”
The release by Wittenstein enables high integrity application development on the ‘most integrated’ embedded microcontrollers on the market. The product greatly reduces the time and risk associated with obtaining FDA510(k) and IEC61508 certification through Wittenstein’s Design Assurance Pack.
Developed specifically for applications such as medical and industrial devices, SafeRTOS has been independently certified by TÜV SÜD, as having been developed in compliance with IEC61508 SIL3, and uses a compiler independent methodology.
SafeRTOS, a finalist at the Elektra Awards 2008 Embedded Product of the Year, was originally developed from the popular and robust open source kernel, FreeRTOS. Migration from FreeRTOS to SafeRTOS enables costs to be controlled during development.
Luminary Micro’s Chief Marketing Officer Jean Anne Booth said, “Stellaris microcontrollers are widely used in medical and industrial devices, and we are seeing a growing demand for certification in these markets. The launch by Wittenstein vastly simplifies what can otherwise be a complex task.”
Discussing the forthcoming announcement, FreeRTOS creator and Wittenstein’s Head of Innovation, Richard Barry, said, “Luminary is an exciting innovator in the ARM space and we are delighted about this early collaboration on the new flagship Stellaris microcontrollers.”
OpenVPX looks to overcome interoperability issues
An alliance of defence prime contractors and embedded computing systems suppliers has opened membership to its Technical Working Group to form the OpenVPX Industry Working Group.
The group was set up to tackle system-level interoperability issues associated with the VPX (VITA 46) family of specifications. VPX is one of the 'successor' specifications to VME and VME64 but unlike these is still suffering from interoperability issues between different manufacturers.
Although the group is hosted by Mercury Computer Systems, one of the leading users and developers of VPX, any COTS defense contractor or embedded computing supplier that is in good standing with the VITA Standards Organization (VSO), and is committed to the OpenVPX Industry Working Group’s mission and aggressive schedule for completion of a system specification, is invited to apply for membership to the Technical Working Group.

The VPX (VITA 46) roadmap
“The overwhelming response to this initiative exceeded our expectations, and we’re delighted to open enrollment to the Technical Working Group,” said Ian Dunn, CTO, Mercury Computer Systems.
“The Boeing Company supports the OpenVPX initiative as part of our ongoing efforts to work with the industry to develop standards that promote the interoperability of systems and assemblies,” said Jim Robles, Boeing Senior Technical Fellow. “We welcome the opportunity to work with LSIs and vendors of VPX products in this effort."
“GE Fanuc has long been committed to the VPX architecture and to its potential to revolutionize military embedded computing, and we very much welcome this initiative that will lower the risk of adoption of VPX systems, expand the market and accelerate deployment,” said Jim Berlin, CTO, Embedded Systems, GE Fanuc Intelligent Platforms. “We’re looking forward to building on the charter set at our first meeting, and moving ahead to complete a system specification in order to provide the necessary top-down, system-level design guidance.”
Once the OpenVPX system specification is transitioned into VITA, the Working Group will disband.
The group was set up to tackle system-level interoperability issues associated with the VPX (VITA 46) family of specifications. VPX is one of the 'successor' specifications to VME and VME64 but unlike these is still suffering from interoperability issues between different manufacturers.
Although the group is hosted by Mercury Computer Systems, one of the leading users and developers of VPX, any COTS defense contractor or embedded computing supplier that is in good standing with the VITA Standards Organization (VSO), and is committed to the OpenVPX Industry Working Group’s mission and aggressive schedule for completion of a system specification, is invited to apply for membership to the Technical Working Group.
The VPX (VITA 46) roadmap
“The overwhelming response to this initiative exceeded our expectations, and we’re delighted to open enrollment to the Technical Working Group,” said Ian Dunn, CTO, Mercury Computer Systems.
“The Boeing Company supports the OpenVPX initiative as part of our ongoing efforts to work with the industry to develop standards that promote the interoperability of systems and assemblies,” said Jim Robles, Boeing Senior Technical Fellow. “We welcome the opportunity to work with LSIs and vendors of VPX products in this effort."
“GE Fanuc has long been committed to the VPX architecture and to its potential to revolutionize military embedded computing, and we very much welcome this initiative that will lower the risk of adoption of VPX systems, expand the market and accelerate deployment,” said Jim Berlin, CTO, Embedded Systems, GE Fanuc Intelligent Platforms. “We’re looking forward to building on the charter set at our first meeting, and moving ahead to complete a system specification in order to provide the necessary top-down, system-level design guidance.”
Once the OpenVPX system specification is transitioned into VITA, the Working Group will disband.
Tuesday, October 07, 2008
Portable Multimedia blog starts
The embedded blog has been static for too long, and will be starting up again soon with regular input on the embedded market but with a sharper focus on embedded hardware technology.
At the same time a new blog has spun out to cover the portable multimedia market, taking the embedded hardware and software for portable systems from mobile phones to portable Internet devices and the middleware that makes them run, and adding the applications and operator perspective for a more complete, vertical analysis.
Please have a look at the beta of the PortableMultimediaBlog and let me know what you think, and keep coming back for the latest news and analysis for the embedded market here at the Embedded Blog.
At the same time a new blog has spun out to cover the portable multimedia market, taking the embedded hardware and software for portable systems from mobile phones to portable Internet devices and the middleware that makes them run, and adding the applications and operator perspective for a more complete, vertical analysis.
Please have a look at the beta of the PortableMultimediaBlog and let me know what you think, and keep coming back for the latest news and analysis for the embedded market here at the Embedded Blog.
Tuesday, January 08, 2008
Pansonic shows 150in plasma screen
It's the Consumer Electronics Show again, and this year Panasonic is pushing the size of its HD plasma screen to 150inches! It is also likely to be selling fro roughly the same price (£50,000) as last year's 103in version. But this is going to need some high class content, or be viewed from quite a long way away!
Thursday, January 03, 2008
Fuel cells and virtual network computing show polar bears
Photo: © R & C Buchanan Virtual Network Computing (VNC) embedded technology from a company in Cambridge has been used to control and maintain a network of remote cameras in Canada to track the movement and behaviour of polar bears.
The project used an IP-based network system of digital microwave links to transmit images across the tundra from Cape Churchill cameras to the remote town of Churchill, which was in turn connected to the control centre in Alaska via the Internet. The work also involved a Tundra Buggy that fed live Polar Bear Cam streaming video through a 45MB wireless link to the town of Churchill and then to the National Geographic website.
The system was set up by SeeMore Wildlife Systems that specializes in remote wildlife monitoring solutions, to help researchers from Polar Bears International researchers from the University of Florida to film the dwindling number of polar bears as they prepared to head off to the Arctic for the winter.
"As the cameras were unmanned and powered by methanol fuel cells, it would have been virtually impossible to keep the system running without using VNC," said wildlife filmmaker Daniel Zatz of SeeMore Wildlife Systems. "VNC provided full control and monitoring of the camera network and remote PC server in Churchill from the relative warmth and luxury of project HQ in Alaska."
One of the benefits of realVNC is that it works with virtually any platform or operating system across any network, using just a simple downloadable interface or through a browser. This meant that Zatz and his team could log in, manage the network and download images directly from a PC, Mac or even handheld device.
The VNC technology comes from RealVNC in Cambridge which was originally developed in the AT&T labs in the City under Porf Andy Hopper. With over 100 million software downloads, VNC is a de facto standard for remote control and has been used widely in hundreds of different products and applications, from helpdesks to virtualization.
RealVNC has broadened the scope for VNC software by founding Adventiq to design semiconductors and software for sending keyboard, video and mouse (KVM) signals via IP networks market. Products containing Adventiq chips and embedded VNC software are already on the market.
Subscribe to:
Posts (Atom)