Microchip has developed the industry’s first 12bit Quad Digital-to-Analogue Converter (DAC) to include non-volatile EEPROM, enabling the DAC’s configuration to be loaded automatically during power-up. The low power of the device targets portable consumer applications such as personal media players, digital cameras and GPS devices as well as industrial and automotive.
The on-board EEPROM, coupled with an internal voltage reference, four-channel architecture and rail-to-rail precision output amplifier, enables the MCP4728 to significantly reduce the size and component cost in a variety of battery powered and power-constrained applications.
Through the integrated I2CM serial interface, designers can configure the MCP4728 input codes, configuration bits and I2C address bits. This configuration information is stored in the non-volatile EEPROM and therefore retained after power is removed, making it available immediately after power is reapplied and reconfiguring the DAC during power-up.
The architecture of the MCP4728 also allows each of the four channels to be individually shut down, reducing power consumption to as low as 40nA and helping designers to meet or exceed cost and size requirements while providing the resolution and low power consumption that today’s battery powered and power-constrained applications require. These include consumer (personal media players, digital cameras and GPS devices); medical; industrial; appliance, and automotive (LED lamps and alarm/security systems) devices.
The $15 MCP4728 Evaluation Board is available to help designers quickly evaluate the MCP4728 DAC in their applications, and the DAC is sampling now in a 10-pin MSOP package.
All the latest quantum computer articles
See the latest stories on quantum computing from eeNews Europe
Monday, July 20, 2009
Semiconductor market sunshine

Following four consecutive quarters of reductions, global inventories of chips have declined to appropriate levels, says market researcher iSuppli, clearing the way for stockpile rebuilding and higher sales in the second half of the year.
After declining by 2.2 percent and 6.6 percent in the third and fourth quarters of 2008, inventories at global semiconductor manufacturers plunged by 15.1 percent in the first quarter, followed by a moderate 1.5 percent in the second quarter. At the end of the second quarter, iSuppli preliminarily estimates that inventories fell to $24.9 billion, down from the recent peak of $32.6 billion in the second quarter of 2008.
“Falling demand in the first half of 2009 prompted a swift inventory correction among chip suppliers,” said Carlo Ciriello, financial analyst for iSuppli Corp. “Companies dialed down utilization levels and cleared swaths of inventory by reducing Average Selling Prices (ASPs) in anticipation of continued depressed demand. Furthermore, semiconductor suppliers cut costs in an effort at right-sizing to better reflect the economics of smaller end markets.”
This is another positive sign after increasing utilisation levels at foundries such as TSMC.
The semiconductor inventory reduction effort was not limited to chip suppliers, with other segments of the electronics supply chain following suit. These segments include storage product makers, mobile handset OEMs, Electronics Manufacturing Services (EMS) providers and distributors.
iSuppli forecasts that second-half inventories will increase modestly in unison with sequential revenue increases for the global semiconductor industry. After an 18.8 percent decline in the first quarter of 2009 and a 7.1 sequential increase in the second quarter, global semiconductor revenue will rise in the second half, in line with financial guidance from Intel Corp. and other chipmakers. Global semiconductor revenue will increase by a vigorous 10.4 percent in the third quarter and by 4.9 percent in the fourth, iSuppli predicts.
Semiconductor inventories will rise by 5.5 percent in the third quarter and by 1 percent in the fourth to end the year at $26.5 billion, still an appropriate level for the demand, iSuppli predicts.
“Despite the more optimistic outlook, corporations remain apprehensive about the second half, consistently noting fragile demand,” Ciriello said. “Market values have declined, and the tradeoff between raising prices and maintaining market share has commanded more management attention than usual. However, anticipating longer-term end-demand has proven difficult,” Ciriello said. “Thus, a self-inflicted oversupply situation with too much inventory build would be akin to applying frost to blossoming green shoots.”
Energy harvesting made simple

Energy harvesting is a very interesting concept but hasn't yet made it into the mainstream. This is despite some quite compelling technology developments and key researchers such as TI's Gene Frantz looking closely at it.
Part of the problem as been putting together all the bits to make it work, to take the power modules that convert vibration or temperature differences into power for a sensor. Another problem is that this power source tends to be intermittent and a capacitor or other storage can be needed. Then you need very low power electronics to make it work properly.
All in all, a bit of a challenge, but now low power wireless microcontroller and module maker Jennic in Sheffield has developed a demonstration platform that solves all these issues.
This platform combines a sensor with a 32bit controller and standards-based low power wireless link to send signals without batteries, eliminating the potential maintenance overheads of conventional battery power by harvesting energy from sustainable sources.
This appeals to applications that don't usually take up new technology quickly such as Energy and Environmental Management, Building Management, Process Control, Condition Monitoring, Logistics and Asset Tracking, but having a ready-made platform allows sensors to be quickly and easily developed and deployed. Using energy harvesting means the sensors - usually temperature - can be easily deployed without wires and without having to have a costly maintenance schedule to go and replace the batteries.
“Harvesting energy from sustainable sources presents designers with the ultimate power challenge: the energy supplied is not necessarily continuous and is available at relatively low levels,” said Jimi Simpson, Jennic Product Marketing. “This means that every element of the design, from the sensor to the microcontroller, must be considered and managed to achieve the highest levels of power efficiency.”For the platform, Jennic has worked with other technology suppliers:
- Micropelt for thermogeneration, converting temperature gradients into electrical energy;
- Cymbet, an expert in energy storage and solar power conversion;
- AdaptivEnergy, for harvesting mechanical energy, such as impulse, shock, vibration and footfall, using piezo-based DC power supplies and
- Powercast, for RF energy harvesting.
Jennic has developed an ultra low power sensor solution based on its JN5139 and JN5148 wireless microcontrollers that interfaces to each harvesting source to obtain the power needed to make periodic sensor measurements and transmission of the same over the wireless network to a central controller.
The 32-bit RISC processor in Jennic’s wireless microcontrollers provides the processing capability to implement a software-controlled charge-and-fire energy management process, in which the microcontroller periodically wakes to measure energy levels, and then measures and transmits data when sufficient energy is available.
“The JN5148 wireless microcontroller undoubtedly sets the benchmark for ultra-low power IEEE802.15.4 based wireless in energy harvesting; featuring sleep current levels of <1µA, an active transmission current of 15mA and a receive current of 18mA,” said Simpson. “This ultra-low current consumption enables the JN5148 to use the smallest of energy stores including super capacitors and rechargeable cells to allow the lowest cost BOM.”
Thursday, July 02, 2009
USB3 deal for ARC
Chip designer Initio is to use the ARC600 configurable core for a family of USB 3.0 and solid state drive (SSD) controllers. The ARC600 core, developed by ARC International of the UK, will be embedded within USB 3.0 bridge controllers and SSD controllers to provide a Serial ATA2 to USB 3.0 Bridge and/or individual SATA2 and USB 3.0 outputs, replacing an 8051 core. The ARC600 also has the advantage of occupying the same silicon area and operating at the same level of power as the 8051 it replaces.
The USB 3.0 (SuperSpeed USB) market is expected to begin shipping as discrete silicon this year with broad deployment of SuperSpeed USB-enabled products expected in 2010 according to market research firm In-Stat. The interface will target applications requiring high rates and volumes of data transfer, such as external storage, consumer electronics, and communications devices with increasing amounts of storage. The replacement potential for USB 3.0 is enormous. In-Stat counts more than 2.6 billion USB-enabled devices shipped in 2007 and expects annual shipment growth of USB-enabled devices through 2012 to be 8.3 percent. SSD unit shipments will also enjoy strong growth. IDC predicts a compound annual growth rate (CAGR) of 76 percent from 2007-2012.
"We're extremely pleased with the performance of the ARC 600 in our USB 3.0 chip design," said Jui Liang CEO at Initio Corp. "The core provides just the right silicon area and power consumption for the solid state disk controller and USB 3.0 application. It has more than enough processing power to handle the 5.0 Gbit/s data rate of USB 3.0 as well as the more complex USB 3.0 control logic."
Initio is a leading ASIC supplier for storage applications with offices in Taiwan, USA, and China. Initio's product lines including interconnect bridge controllers for USB, Firewire 400/800, eSATA, SATA 1.5G/3G, and SSD controllers.
The USB 3.0 (SuperSpeed USB) market is expected to begin shipping as discrete silicon this year with broad deployment of SuperSpeed USB-enabled products expected in 2010 according to market research firm In-Stat. The interface will target applications requiring high rates and volumes of data transfer, such as external storage, consumer electronics, and communications devices with increasing amounts of storage. The replacement potential for USB 3.0 is enormous. In-Stat counts more than 2.6 billion USB-enabled devices shipped in 2007 and expects annual shipment growth of USB-enabled devices through 2012 to be 8.3 percent. SSD unit shipments will also enjoy strong growth. IDC predicts a compound annual growth rate (CAGR) of 76 percent from 2007-2012.
"We're extremely pleased with the performance of the ARC 600 in our USB 3.0 chip design," said Jui Liang CEO at Initio Corp. "The core provides just the right silicon area and power consumption for the solid state disk controller and USB 3.0 application. It has more than enough processing power to handle the 5.0 Gbit/s data rate of USB 3.0 as well as the more complex USB 3.0 control logic."
Initio is a leading ASIC supplier for storage applications with offices in Taiwan, USA, and China. Initio's product lines including interconnect bridge controllers for USB, Firewire 400/800, eSATA, SATA 1.5G/3G, and SSD controllers.
Thursday, June 25, 2009
Multicore move for GE Fanuc
GE Fanuc Intelligent Platforms is to use Freescale’s multicore QorIQ processors in forthcoming products. QorIQ processors feature up to eight cores for maximum performance, and allow GE Fanuc to develop new platforms that will be form-, fit- and function compatible with their PowerPC predecessors and enable existing customers to take advantage of exciting new levels of performance at minimal cost. These new platforms will also allow lower power consumption and heat dissipation per unit of performance.
The QorIQ technology will be used in GE Fanuc’s VME-based, 3U VPX-based, 6U VPX-based and 3U CompactPCI-based families of single board computers. Support for both the eight core P4080 QorIQ processor and the dual core P2020 processor is also planned. All products based on QorIQ technology will be available in five ruggedization levels – including full conduction cooling over the -40°C to +85°C range - to meet the demanding requirements of military customers.
“We have been developing Power Architecture products since the early 1990s,” said Peter Cavill, General Manager, Military & Aerospace Products, GE Fanuc Intelligent Platforms. “Since then, we have followed up with a growing family of Power Architecture platforms that have enabled our customers to take advantage of the latest processing technologies, keeping their systems at the leading edge of performance with minimum integration effort, and minimizing long term cost of ownership.”
“One of the QorIQ-based products we will introduce will be pin-compatible with the PPC2A – a product we announced in 1997,” he continued. “That’s a powerful demonstration of how we help protect our customers against obsolescence. We expect that this new generation of single board computers will also provide compelling price/performance advantages for new customers.”
The P4080 processor is rated at less than 30 watts and combines eight Power Architecture e500mc cores operating at frequencies up to 1.5 GHz. The P2020 core operates at up to 1.2GHz and Freescale believes this is ideal for applications that have tight thermal constraints.
The QorIQ technology will be used in GE Fanuc’s VME-based, 3U VPX-based, 6U VPX-based and 3U CompactPCI-based families of single board computers. Support for both the eight core P4080 QorIQ processor and the dual core P2020 processor is also planned. All products based on QorIQ technology will be available in five ruggedization levels – including full conduction cooling over the -40°C to +85°C range - to meet the demanding requirements of military customers.
“We have been developing Power Architecture products since the early 1990s,” said Peter Cavill, General Manager, Military & Aerospace Products, GE Fanuc Intelligent Platforms. “Since then, we have followed up with a growing family of Power Architecture platforms that have enabled our customers to take advantage of the latest processing technologies, keeping their systems at the leading edge of performance with minimum integration effort, and minimizing long term cost of ownership.”
“One of the QorIQ-based products we will introduce will be pin-compatible with the PPC2A – a product we announced in 1997,” he continued. “That’s a powerful demonstration of how we help protect our customers against obsolescence. We expect that this new generation of single board computers will also provide compelling price/performance advantages for new customers.”
The P4080 processor is rated at less than 30 watts and combines eight Power Architecture e500mc cores operating at frequencies up to 1.5 GHz. The P2020 core operates at up to 1.2GHz and Freescale believes this is ideal for applications that have tight thermal constraints.
Monday, June 22, 2009
Multicore TVs: LG signs ARM
LG Electronics, one of the world’s largest digital TV brands, has licensed multicore processor and graphics technology from ARM for its next generation of digital TVs.
LG will use the ARM11 MPCore multicore processor to target a range of platforms with the same architecture simply by implementing single or multiple SMP cores. It will also use ARM Mali-200 and Mali-400 MP graphics processors for 1080p resolution displays for home cinema experience that includes high-definition graphics, whilst vastly improving the browsing experience on DTV user interfaces.
This will also be used to support a full Web 2.0 experience from their DTVs with Adobe and Open source software platforms and the emergence of tru2way technology for interactive cable services, including video-on-demand, voting and polling, games, and e-commerce without the need for a separate set-top box. Additionally, manufacturers are striving to build intelligent AV processing and develop home devices that are more energy efficient.
The market proven ARM11 MPCore synthesizable multicore processor provides a scalable solution that addresses the requirements of multiple designs. Devices can be configured to contain between one and four processors delivering up to an aggregate 5000 Dhrystone MIPS of performance at 1GHz while providing existing software portability across single CPU and multi-CPU designs. The ARM11 MPCore processor provides the memory throughput required of data intensive applications while delivering greater performance at lower frequencies than comparable single processor designs, so offering significant cost savings to system designers. The ARM11 MPCore processor also simplifies otherwise complex multiprocessor design, reducing time-to-market and total design cost.
The Mali GPU family scales from Mali-55, the world’s smallest OpenGL ES graphics processor to Mali-400 MP, the highest-performance embedded multicore GPU IP on the market which supports complex applications at up to 1080p high-definition resolution, thereby addressing the widest range of performance points for all embedded graphics needs. This diverse offering enables ARM to lead in conformance to numerous open standards and confirms the company’s unique position as a world-class supplier of the complete range of hardware and software graphics IP, enabling application developers and device manufacturers to create competitive and cutting-edge designs.
Mali graphics processors deliver stunning 2D and 3D graphics providing 4x and 16x full scene anti-aliasing (FSAA) without any noticeable drop in performance. In addition to providing content developers with the state-of-the-art programmable features in OpenGL ES 2.0, Mali products also support 2D scalable vector graphics through OpenVG for improved text, navigation, UI and web-browsing experiences.
LG will use the ARM11 MPCore multicore processor to target a range of platforms with the same architecture simply by implementing single or multiple SMP cores. It will also use ARM Mali-200 and Mali-400 MP graphics processors for 1080p resolution displays for home cinema experience that includes high-definition graphics, whilst vastly improving the browsing experience on DTV user interfaces.
This will also be used to support a full Web 2.0 experience from their DTVs with Adobe and Open source software platforms and the emergence of tru2way technology for interactive cable services, including video-on-demand, voting and polling, games, and e-commerce without the need for a separate set-top box. Additionally, manufacturers are striving to build intelligent AV processing and develop home devices that are more energy efficient.
“By licensing ARM technologies, LG Electronics will be able to offer a future-proofed premium-quality digital TV experience for today’s connected home,” said Seung-Jong Choi, research fellow of Digital TV Lab, LG Electronics. “The connected home relies on technology that is fully functional and that guarantees a high-quality, energy efficient multimedia experience. With Web 2.0 requirements moving into a connected and high definition home, LG Electronics has selected the ARM architecture to guarantee longevity for our own technology.”
The market proven ARM11 MPCore synthesizable multicore processor provides a scalable solution that addresses the requirements of multiple designs. Devices can be configured to contain between one and four processors delivering up to an aggregate 5000 Dhrystone MIPS of performance at 1GHz while providing existing software portability across single CPU and multi-CPU designs. The ARM11 MPCore processor provides the memory throughput required of data intensive applications while delivering greater performance at lower frequencies than comparable single processor designs, so offering significant cost savings to system designers. The ARM11 MPCore processor also simplifies otherwise complex multiprocessor design, reducing time-to-market and total design cost.
The Mali GPU family scales from Mali-55, the world’s smallest OpenGL ES graphics processor to Mali-400 MP, the highest-performance embedded multicore GPU IP on the market which supports complex applications at up to 1080p high-definition resolution, thereby addressing the widest range of performance points for all embedded graphics needs. This diverse offering enables ARM to lead in conformance to numerous open standards and confirms the company’s unique position as a world-class supplier of the complete range of hardware and software graphics IP, enabling application developers and device manufacturers to create competitive and cutting-edge designs.
Mali graphics processors deliver stunning 2D and 3D graphics providing 4x and 16x full scene anti-aliasing (FSAA) without any noticeable drop in performance. In addition to providing content developers with the state-of-the-art programmable features in OpenGL ES 2.0, Mali products also support 2D scalable vector graphics through OpenVG for improved text, navigation, UI and web-browsing experiences.
Monday, June 15, 2009
New LCD technology for dramatically lower power
Sharp has developed a new LCD screen that is claims reduces power consumption by 130 times by adding memory to the column drivers.
The Memory LCD black and white screen is based on the company's proprietary Continuous Grain Silicon technology. Each pixel is equipped with memory circuitry to save the image information uploaded to the display so the image information has to be rewritten only in the pixels whereas the content has changed in comparison to the previous picture frame.
With common LCDs the microcontroller has to rewrite the complete screen content from frame to frame at a rate of 50 to 60 Hz even though most of the image content remains the same. The 1.35in Memory LCD consumes about 15 µW in operation whereas a standard LCD of comparable size needs about 2 mW to render an image.
This new type of LCD als does not need polarisers, as it uses a special liquid crystal material where the image is generated by the status of the pixel just changing from black to white with a reflectivity of 50%.
Due to the low power consumption, small solar cells can provide enough electricity to drive Memory LCDs. The new type of display is therefore an ideal solution for small size portable applications such as wrist watches, pulse meter and other fitness devices, price tags, etc. Such systems can even be designed as no-battery applications using solar cells as power supply.
Wednesday, June 10, 2009
Touch screen chip maker licenses ARM M0
Melfas, a Korean chipmaker, has licensed ARM's Coretex M-0 32bit core to upgrade from its 8bit 8051 core in a capacitive-sensing touch input chip.
Melfas has many years’ expertise in designing turnkey touch screen module solutions including controller IC, circuitry, driver software, and patterned ITO panel with window lens and test system. It has shipped over 40 million controller ICs since 2006. According to market research firm, DisplaySearch, the total touch screen module market will grow from $3.6 billion in 2008 to $9 billion by 2015, with a CAGR of 14 per cent.
The deal is a good one for ARM as it drives high volume royalties.
The Cortex-M0 processor is the lowest power and smallest 32-bit ARM processor. It offers an optimal blend of ultra low-power, energy efficiency and low gate count, with binary upwards compatibility with the higher performance ARM Cortex-M3. This makes it an ideal next step for embedded applications that outgrow legacy 8-bit microcontrollers, skipping the need for 16-bit devices.
Based in Seoul, Korea, Melfas was set up in 2000 with a mission to make electronics friendly and smart. Melfas developed its first semiconductor fingerprint sensor in 2003 and its first touch sensor chip in 2005, and early this year announced it had shipped 40 million touch sensor chips.
Melfas has many years’ expertise in designing turnkey touch screen module solutions including controller IC, circuitry, driver software, and patterned ITO panel with window lens and test system. It has shipped over 40 million controller ICs since 2006. According to market research firm, DisplaySearch, the total touch screen module market will grow from $3.6 billion in 2008 to $9 billion by 2015, with a CAGR of 14 per cent.
"Our engineers were already familiar with the Keil software development tools, which support both 8051 and ARM Cortex-M0 processor-based devices," said D.J. Min, VP Engineering, Melfas. "We were able to quickly and easily evaluate the new processor using our existing 8051 code base. The results demonstrated that we could halve the flash memory requirement using the Cortex-M0 processor, and reduce the MHz requirement by 5x, saving power.”
The deal is a good one for ARM as it drives high volume royalties.
“The use of touch screen controllers in products ranging from mobile phones, personal media players, digital cameras, navigation devices, to home appliances is rapidly increasing. The Cortex-M0 processor’s energy efficiency and small size make it particularly suited for these applications,” said Eric Schorn, VP marketing, Processor Division, ARM. “The agreement with Melfas is a further endorsement of the Cortex-M family of low power processors and ARM physical IP, and demonstrates ARM’s low power leadership.”
The Cortex-M0 processor is the lowest power and smallest 32-bit ARM processor. It offers an optimal blend of ultra low-power, energy efficiency and low gate count, with binary upwards compatibility with the higher performance ARM Cortex-M3. This makes it an ideal next step for embedded applications that outgrow legacy 8-bit microcontrollers, skipping the need for 16-bit devices.
Based in Seoul, Korea, Melfas was set up in 2000 with a mission to make electronics friendly and smart. Melfas developed its first semiconductor fingerprint sensor in 2003 and its first touch sensor chip in 2005, and early this year announced it had shipped 40 million touch sensor chips.
Satellite M2M from Digi deal

Digi International has entered the market for satellite machine-to-machine (M2M) links with the $3m acquistion of the assets of Indian company MobiApps.
MobiApps employs 63 people in India, Singapore, and the US with a vast majority based in its India headquarters in Bangalore with a strong technology and product position using the Orbcomm satellite system.
"Our wireless M2M customers are increasingly asking for satellite as a communications option to complete their coverage model," said Joe Dunsmore, Chairman, President, and CEO of Digi. "We’re looking forward to moving MobiApps products into Digi’s strong global sales and distribution network. We believe satellite M2M will be a high growth opportunity for the foreseeable future."
MobiApps recently introduced a new generation of products based on its own custom designed and patented mixed signal ASIC chip, which dramatically reduces the complexity and improves performance of satellite M2M system solutions such as fleet management, marine vessel tracking, container tracking, agricultural monitoring, energy management, and remote field service applications.
Digi expects to immediately functionally integrate MobiApps with current MobiApps CEO Taroon Kamdar facilitating the integration process with the Digi management team over the next several months.
Saturday, June 06, 2009
USB3.0 shipment starts
NEC Electronics starts shipping the industry's first Universal Serial Bus (USB) host controller (part number µPD720200) for the SuperSpeed USB 3.0 standard (see TI below, which ships at the end of the year).
The µPD720200 device is a host controller for PCs and other digital devices, and is based on the new version of the SuperSpeed USB standard that supports transfer speeds of up to 5Gbit/s. This aims the part not only at PCs but also digital TVs and DVD recorders, transferring 25 GBytes of video content on a blu-ray disc in 70s, compared to 14 minutes to transfer the same content when using the high-speed USB 2.0 with 480 Mbit/s transfer.
Perhaps surprisingly, NEC has been leading in USB chips, shipping the world's first USB 2.0-compliant host controller in 2000.
NEC Electronics expects the market for USB 3.0 to begin a rapid expansion, with monthly production expected to reach approximately 1,000,000 units in September 2009. It intends to market the $15 µPD720200 controller aggressively, and to offer a range of related products by incorporating USB 3.0 communications as an IP (intellectual property) core function in various application specific ICs.
The µPD720200 device is a host controller for PCs and other digital devices, and is based on the new version of the SuperSpeed USB standard that supports transfer speeds of up to 5Gbit/s. This aims the part not only at PCs but also digital TVs and DVD recorders, transferring 25 GBytes of video content on a blu-ray disc in 70s, compared to 14 minutes to transfer the same content when using the high-speed USB 2.0 with 480 Mbit/s transfer.
Perhaps surprisingly, NEC has been leading in USB chips, shipping the world's first USB 2.0-compliant host controller in 2000.
NEC Electronics expects the market for USB 3.0 to begin a rapid expansion, with monthly production expected to reach approximately 1,000,000 units in September 2009. It intends to market the $15 µPD720200 controller aggressively, and to offer a range of related products by incorporating USB 3.0 communications as an IP (intellectual property) core function in various application specific ICs.
Thursday, June 04, 2009
Intel buys Wind River
Intel is making a serious play into the truly embedded market with a $884m deal to buy real time operating system (RTOS) company Wind River Systems.
The board of directors of Wind River has unanimously approved the transaction which is expected to close this summer and then Wind River will report into Intel's Software and Services Group, headed by Renee James.
This is a key part of Intel's strategy to grow its processor and software presence outside the traditional PC and server market segments into embedded systems and mobile handheld devices, and Wind River is already a close partner with Intel, making use of its hardware virtualisation technology.
Wind River will become a wholly owned subsidiary of Intel and continue with its current business model.
"This acquisition will bring us complementary, market-leading software assets and an incredibly talented group of people to help us continue to grow our embedded systems and mobile device capabilities," said James at Intel. "Wind River has thousands of customers in a wide range of markets, and now both companies will be better positioned to meet growth opportunities in these areas."
"As a wholly owned subsidiary, Wind River will more tightly align its software expertise to Intel's platforms to speed the pace of progress and software innovation," said Ken Klein, Wind River Chairman, president and CEO. "We remain committed to continuing to provide leading solutions across multiple hardware architectures and delivering the same world-class support to which our customers have grown accustomed."
The acquisition will deliver to Intel robust software capabilities in embedded systems and mobile devices, from in-car "info-tainment" systems and other automotive areas, networking equipment, aerospace and defence to energy and thousands of other devices.
The board of directors of Wind River has unanimously approved the transaction which is expected to close this summer and then Wind River will report into Intel's Software and Services Group, headed by Renee James.
This is a key part of Intel's strategy to grow its processor and software presence outside the traditional PC and server market segments into embedded systems and mobile handheld devices, and Wind River is already a close partner with Intel, making use of its hardware virtualisation technology.
Wind River will become a wholly owned subsidiary of Intel and continue with its current business model.
"This acquisition will bring us complementary, market-leading software assets and an incredibly talented group of people to help us continue to grow our embedded systems and mobile device capabilities," said James at Intel. "Wind River has thousands of customers in a wide range of markets, and now both companies will be better positioned to meet growth opportunities in these areas."
"As a wholly owned subsidiary, Wind River will more tightly align its software expertise to Intel's platforms to speed the pace of progress and software innovation," said Ken Klein, Wind River Chairman, president and CEO. "We remain committed to continuing to provide leading solutions across multiple hardware architectures and delivering the same world-class support to which our customers have grown accustomed."
The acquisition will deliver to Intel robust software capabilities in embedded systems and mobile devices, from in-car "info-tainment" systems and other automotive areas, networking equipment, aerospace and defence to energy and thousands of other devices.
Wednesday, June 03, 2009
Netbooks - the next generation
Freescale has been working on new form factors for the next generation of netbooks - story and more pictures at The PortableMultiMedia blog
Android moves into home equipment
MIPS Technologies has ported Google's Android operating system to its processor cores, aiming to drive the software, and Web applications, into more areas such as digital TV and set top boxes.
With Android and the open source development community around it, developers can easily and quickly create new applications and OEMs can leverage the growing set of applications for their devices, says MIPS. With the MIPS ecosystem around Android, OEMs will be able to quickly optimize Android for their specific platforms.
MIPS Technologies is establishing development tools and system integration partnerships with service providers to help its licensees with porting, integration, and testing. Partnerships initially include those with Embedded Alley and Viosoft.
Embedded Alley, a leading provider of embedded Linux solutions, is offering support for SoC implementations from MIPS Technologies’ licensees. The Embedded Alley Development System for Android-based Devices includes processor and board support as well as a version of the Android Dalvik virtual machine (VM) optimized for the MIPS instruction set and CPU cores; extending the Android bionic library, linker and other software infrastructure for the MIPS architecture; and providing integration and testing board support industry-specific device drivers, CODECs and other middleware. Embedded Alley is already enabling Android on devices built with the Alchemy Processor family from RMI—providing an Android-ready Linux kernel for RMI Au1250 and the Embedded Alley Development System for Alchemy reference platforms.
Viosoft Corporation is a key partner for MIPS based software development tools. Viosoft’s Arriba tools deliver comprehensive support for single and multi-core platforms. The tools support Android, and are available today.
With Android and the open source development community around it, developers can easily and quickly create new applications and OEMs can leverage the growing set of applications for their devices, says MIPS. With the MIPS ecosystem around Android, OEMs will be able to quickly optimize Android for their specific platforms.
"In the future, almost every consumer device will be connected to the Internet and its wide array of content," said Rich Wawrzyniak, senior analyst for ASIC and SoC at Semico Research Corporation. "Leveraging Android to quickly and easily bring new and innovative applications and user interfaces to devices beyond the mobile phone is a very appealing proposition for consumers. Android also removes applications from their ties to specific hardware systems and opens the market for companies like MIPS Technologies to move into new market segments. I can understand why MIPS’ partners and licensees are excited about Android on MIPS. It is a potential game changer."
MIPS Technologies is establishing development tools and system integration partnerships with service providers to help its licensees with porting, integration, and testing. Partnerships initially include those with Embedded Alley and Viosoft.
Embedded Alley, a leading provider of embedded Linux solutions, is offering support for SoC implementations from MIPS Technologies’ licensees. The Embedded Alley Development System for Android-based Devices includes processor and board support as well as a version of the Android Dalvik virtual machine (VM) optimized for the MIPS instruction set and CPU cores; extending the Android bionic library, linker and other software infrastructure for the MIPS architecture; and providing integration and testing board support industry-specific device drivers, CODECs and other middleware. Embedded Alley is already enabling Android on devices built with the Alchemy Processor family from RMI—providing an Android-ready Linux kernel for RMI Au1250 and the Embedded Alley Development System for Alchemy reference platforms.
“Embedded Alley and MIPS Technologies have been working closely to deliver value to our mutual customers,” said Matthew Locke, COO, Embedded Alley. “Following the success of Android in the mobile phone market, many companies have been looking at the potential of Android beyond mobile handsets, but it just wasn’t clear how to make Android a reality for other types of devices. Embedded Alley, together with MIPS -- a strong leader in the digital home marketplace -- has determined what it will take, and we are making it happen. We are enabling OEMs and developers to create new Android-based designs."
Viosoft Corporation is a key partner for MIPS based software development tools. Viosoft’s Arriba tools deliver comprehensive support for single and multi-core platforms. The tools support Android, and are available today.
“The MIPS architecture has consistently delivered high-performance Linux platforms with low power consumption, making it ideal for VM-based environments such as Android,” said Art Lee, vice president of business development, Viosoft Corporation. “To enable the porting, debugging and deployment of the Android platform on MIPS, Viosoft provides a set of unique and very powerful tools that dramatically reduce development time, risk and costs. Working closely with MIPS Technologies, we are focused on helping OEMs quickly and easily bring their Android platforms to market.”
Wednesday, May 13, 2009
USB3.0 test chip from TI
Texas Instruments has developed a new 5Gbit/s transceiver test chip designed to the USB3.0 specification version 1.0 as part of the SuperSpeed USB promoters group. The new transceiver is capable of driving and receiving signals over 4m USB3.0 cables to ensure data integrity. This transceiver will be demonstrated at the USB Developers Conference in Tokyo, Japan on May 21-22.
The new SuperSpeed USB transceiver, with intellectual property (IP) for a digital controller from design tool vendor Synopsys, tested successfully at the USB-IF SuperSpeed Peripheral Interoperability Lab.
The test chip includes an integrated spread spectrum PLL, support for multiple input reference frequencies: 20 MHz, 25 MHz, 30 MHz and 40 MHz, PIPE3 and ULPI compliant interfaces and programmable transmitter pre-emphasis. These save system cost by eliminating the need for an external spread spectrum clocking device and give interoperability across a wide selection of ASIC / FPGA platforms eases designs by allowing designers to work with the same USB device, regardless of the processor platform.
The first of TI's SuperSpeed USB family of devices, the TUSB1310, SuperSpeed USB transceiver, will sample by the end of the year with volume production in the first quarter of 2010
USB3.0
The most obvious change in SuperSpeed USB versus USB 2.0 high-speed is the over 10X speed increase from 480 Mbps to 5 Gbps. There are many applications for which the USB connection is becoming the bottleneck and, as with the introduction of USB 2.0 high-speed, SuperSpeed USB will inspire the creative minds in the industry to develop new, emerging applications and end-equipment that will benefit from the higher performance. The 5Gbit/s data rate should provide headroom for the next 5 years.
In addition to the increase in speed, the physical layer electrical signaling has changed from the simple two-wire system to a dual-simplex data path. This is done over a completely different set of connections than the existing USB 2.0 two-wire interface, which remains untouched. In addition, it was mandatory that the any changes in the electrical signaling scheme NOT drive the need for a new forma factor plug or receptacle on the host, and if possible, on the peripheral as well. In order to minimize the risk, the promoters group determined that creating the new signaling scheme to be very similar to PCI Express could meet the goals. This also allows the connection to retain sideband functionality without additional wires and allow for receiver termination for connect/disconnect detection.
One of the other key changes was to focus on improving the power efficiency of the bus. This is ideal for extending the battery life for portable devices, whether hosts (notebook PCs) or peripherals. The specification defines excellent power characteristics, especially for idle links. Both Upstream and Downstream ports can initiate lower power states of the link. There is also local power management control using multiple link power states defined to further improve the power use efficiency. In addition, another power saving method was to eliminate all polling of devices.
The new SuperSpeed USB transceiver, with intellectual property (IP) for a digital controller from design tool vendor Synopsys, tested successfully at the USB-IF SuperSpeed Peripheral Interoperability Lab.
“Demonstrating interoperability between Synopsys’ DesignWare SuperSpeed USB digital controller and TI’s USB transceiver gives designers confidence that the IP functions successfully in a real-world system environment,” said John Koeter, vice president of marketing for the Solutions Group at Synopsys. “Synopsys and TI are working together to help advance new technology into the market quickly, while minimizing risk and speeding time-to-market.”
The test chip includes an integrated spread spectrum PLL, support for multiple input reference frequencies: 20 MHz, 25 MHz, 30 MHz and 40 MHz, PIPE3 and ULPI compliant interfaces and programmable transmitter pre-emphasis. These save system cost by eliminating the need for an external spread spectrum clocking device and give interoperability across a wide selection of ASIC / FPGA platforms eases designs by allowing designers to work with the same USB device, regardless of the processor platform.
The first of TI's SuperSpeed USB family of devices, the TUSB1310, SuperSpeed USB transceiver, will sample by the end of the year with volume production in the first quarter of 2010
USB3.0
The most obvious change in SuperSpeed USB versus USB 2.0 high-speed is the over 10X speed increase from 480 Mbps to 5 Gbps. There are many applications for which the USB connection is becoming the bottleneck and, as with the introduction of USB 2.0 high-speed, SuperSpeed USB will inspire the creative minds in the industry to develop new, emerging applications and end-equipment that will benefit from the higher performance. The 5Gbit/s data rate should provide headroom for the next 5 years.
In addition to the increase in speed, the physical layer electrical signaling has changed from the simple two-wire system to a dual-simplex data path. This is done over a completely different set of connections than the existing USB 2.0 two-wire interface, which remains untouched. In addition, it was mandatory that the any changes in the electrical signaling scheme NOT drive the need for a new forma factor plug or receptacle on the host, and if possible, on the peripheral as well. In order to minimize the risk, the promoters group determined that creating the new signaling scheme to be very similar to PCI Express could meet the goals. This also allows the connection to retain sideband functionality without additional wires and allow for receiver termination for connect/disconnect detection.
One of the other key changes was to focus on improving the power efficiency of the bus. This is ideal for extending the battery life for portable devices, whether hosts (notebook PCs) or peripherals. The specification defines excellent power characteristics, especially for idle links. Both Upstream and Downstream ports can initiate lower power states of the link. There is also local power management control using multiple link power states defined to further improve the power use efficiency. In addition, another power saving method was to eliminate all polling of devices.
Monday, March 30, 2009
Motorola launches high speed M2M modem
Motorola has launched a high speed Machine-to-Machine (M2M) modem that uses the HSPA protocol for 3.5G connectivity. The HSPA series of modules is comprised of the H24-Global, providing tri-band HSPA connectivity (850/1900/2100MHz); H24-Single (2100MHz); and H24-NA (850/1700/1900MHz).
The new H24 module provides HSUPA/HSDPA connectivity at 5.76Mbit/s upstream and 7.2Mbit/s downstream, enabling true mobile broadband for next generation M2M solutions like automotive infotainment systems, fixed-wireless terminals, telemetry, and advanced security systems featuring real-time video surveillance. The H24 also has on-board GPS capabilities making it the ideal solution for location-based applications. In addition, the H24 includes receiver diversity for optimal performance under harsh network conditions as well as FOTA (firmware over the air), to ensure maximum reliability.
The H24 is built in the same compact form factor as the rest of the Motorola "24" family of wireless modules to provide flexibility with a single design solution. As the entire H24 series includes quad-band GSM/GPRS and EDGE connectivity, customers can easily add HSPA connectivity to their existing G24 GSM-based solution by integrating the H24.
The new H24 module provides HSUPA/HSDPA connectivity at 5.76Mbit/s upstream and 7.2Mbit/s downstream, enabling true mobile broadband for next generation M2M solutions like automotive infotainment systems, fixed-wireless terminals, telemetry, and advanced security systems featuring real-time video surveillance. The H24 also has on-board GPS capabilities making it the ideal solution for location-based applications. In addition, the H24 includes receiver diversity for optimal performance under harsh network conditions as well as FOTA (firmware over the air), to ensure maximum reliability.
The H24 is built in the same compact form factor as the rest of the Motorola "24" family of wireless modules to provide flexibility with a single design solution. As the entire H24 series includes quad-band GSM/GPRS and EDGE connectivity, customers can easily add HSPA connectivity to their existing G24 GSM-based solution by integrating the H24.
"The H24 HSPA module enables the M2M industry to take advantage of global 3.5G network deployment," said Shamai Wasserman, vice president, Motorola Israel & Director of Motorola Wireless Modules business unit. "The addition of 3.5G HSPA technology to the "24" family of wireless modules expands on Motorola's commitment to supporting all air interfaces with a single form factor."
Ultrasound cost reduction technology
Texas Instruments (TI) is targetting the low cost, portable ultrasound equipment market with an embedded processor software toolkit to encourage more flexible ultrasound equipment in clinics rather than just in hospitals. This is the first in a family of products to help manufacturers quickly and easily develop ultrasound applications on the improved processing power of TI’s C64x+ DSP platforms.
The Embedded Processor Software Toolkit (STK) for medical diagnostic ultrasound makes use of the performance, flexibility and power consumption of TI’s C64x+ architecture to shorten the development time of an ultrasound system by providing optimized implementations of commonly used processing blocks.
TI is also offering the TMS320C6455 DSP Starter Kit (DSK) for medical imaging, a low-cost development platform which provides manufacturers with an easy-to-use solution for evaluating DSP algorithms, reducing medical imaging product development time.
The C64x+ kit contains:
* Optimized software modules of common ultrasound processing
blocks
* Complete source code for all modules affords developers full
visibility and enables module customization and differentiation.
* Well defined APIs simplify development by abstracting modules and
enabling easy integration into existing systems.
* Complete benchmarks allow for quick and easy evaluation of module
implementation and comparisons to other architectures.
* Full test benches provide assurance of module functionality while
aiding in evaluation and development. Custom test vectors can easily be
added to check functional and cycle performance for any input.
* Full documentation of each optimized module provides coding
illustrations on computational optimization methods for the C64x+ core
which can be used as a model to optimize other code modules.
* One year of support and release patches include up-to-date releases
and support by TI’s applications team over the next 12 months.
The Embedded Processor Software Toolkit (STK) for medical diagnostic ultrasound makes use of the performance, flexibility and power consumption of TI’s C64x+ architecture to shorten the development time of an ultrasound system by providing optimized implementations of commonly used processing blocks.
TI is also offering the TMS320C6455 DSP Starter Kit (DSK) for medical imaging, a low-cost development platform which provides manufacturers with an easy-to-use solution for evaluating DSP algorithms, reducing medical imaging product development time.
The C64x+ kit contains:
* Optimized software modules of common ultrasound processing
blocks
* Complete source code for all modules affords developers full
visibility and enables module customization and differentiation.
* Well defined APIs simplify development by abstracting modules and
enabling easy integration into existing systems.
* Complete benchmarks allow for quick and easy evaluation of module
implementation and comparisons to other architectures.
* Full test benches provide assurance of module functionality while
aiding in evaluation and development. Custom test vectors can easily be
added to check functional and cycle performance for any input.
* Full documentation of each optimized module provides coding
illustrations on computational optimization methods for the C64x+ core
which can be used as a model to optimize other code modules.
* One year of support and release patches include up-to-date releases
and support by TI’s applications team over the next 12 months.
"Over the next few years, we anticipate a significant shift in medical
imaging applications from traditional imaging modalities limited to
basic diagnostic functions to a new ecosystem comprised of small form
factor, highly accurate portable devices, ” said Susie Inouye, research
director and president, Databeans. “It is clear that manufacturers
seeking to design more flexible, affordable and portable ultrasound
equipment can benefit from the low power, high-performance and flexible
programmability of TI’s digital signal processors.”
Altera and National get closer on automotive
Altera has teamed up with National Semiconductor on the transmission, processing and display of digital data in automotive applications in a first step to closer cooperation.
The two have developed a reference design for graphics interconnect to run digital video in automotive infotainment and driver-assistance applications, using Altera's low-cost Cyclone 3 FPGAs and National's FPD-Link 2 embedded clock serialiser/deserialiser (SERDES). This should provide higher bandwidth over longer range with less cabling and lower electromagnetic interference (EMI), as well as increased reliability and lower system costs.
This reference design shows the transmission of a digital video bitstream over a 10-meter CAT6 cable to National's DS90C124 FPD-Link 2 deserializer. The deserializer output interfaces directly to a Cyclone 2 FPGA, which processes the incoming signals and sends the resulting video to a display.
The two have developed a reference design for graphics interconnect to run digital video in automotive infotainment and driver-assistance applications, using Altera's low-cost Cyclone 3 FPGAs and National's FPD-Link 2 embedded clock serialiser/deserialiser (SERDES). This should provide higher bandwidth over longer range with less cabling and lower electromagnetic interference (EMI), as well as increased reliability and lower system costs.
This reference design shows the transmission of a digital video bitstream over a 10-meter CAT6 cable to National's DS90C124 FPD-Link 2 deserializer. The deserializer output interfaces directly to a Cyclone 2 FPGA, which processes the incoming signals and sends the resulting video to a display.
"National has a proven track record for enabling the high-speed data link between video source and sink in automotive applications," said Erroll Dietz, vice president of National's High-Speed Product Division. "Our expertise in mixed-signal IC design, video transport, signal integrity and automotive qualification processes has made National's FPD-Link 2 SERDES products the first choice among major OEMs and tier-1 suppliers for point-to-point data transfer. Altera's proficiency in embedded digital video processing is a natural complement to National's FPD-Link II SERDES. Our shared customers are well positioned to benefit from our strategic collaboration, which is fueled by strong growth in embedded video for infotainment and driver-assist applications."
"This work with National represents the first in a multi-step collaboration between the two companies to facilitate the routing of high-resolution digital video within automotive applications," said Michael Samuelian, director of Altera's automotive and industrial business unit. "Our experience in processing automotive video, graphics and human-machine interfaces combined with National's widely deployed FPD-Link 2 SERDES family delivers automotive manufacturers a proven solution for deploying digital video in their next-generation vehicles."
Thursday, March 05, 2009
Wind River Linux runs on FPGA processor
This is an interesting move - Wind River's Linux is now available on Altera's Nios II embedded processor which can sit in low cost FPGAs.
Wind River's Linux solution for the Nios II processor is based on Linux 2.6 kernel technology, the GNU 4 tool chain and the Eclipse-based Wind River Workbench Development Suite, customised for the Nios II instruction set, the processor architecture and the custom instructions feature that can be implemented in the FPGA fabric to increase system performance.
"Together, Altera and Wind River have brought Linux support to the Nios II embedded processor on FPGAs," said Mike Langlois, general manager of networking solutions at Wind River. "Our customers can leverage a flexible hardware and software solution to create and bring to market faster, highly differentiated systems. The fact that the Nios II processor can run on all of Altera's FPGAs and HardCopy ASICs to enable a broad spectrum of solutions is well-matched to the needs of our customers who are looking to differentiate on price and performance."
A reference design based on the low cost Cyclone III FPGA provides a fully timing-constrained and performance-optimized processor subsystem design with a Nios II/f core and a number of common system peripherals such as Ethernet, timer and UART. A matching board support package (BSP) and a pre-built Linux kernel for this hardware platform give application developers a familiar and stable environment to jumpstart their application development effort. The same processor system reference design can target any FPGA or HardCopy ASIC in Altera's product portfolio.
"As more customers adopt FPGA platforms to create product differentiation in ever bigger and more sophisticated systems, their software development needs increase and evolve," said Danny Biran, senior vice president of product and corporate marketing at Altera. "Our relationship with Wind River provides us with a partner who can support the broad and diverse needs of our global customers, and whose breath and depth of software expertise complements our hardware expertise."
The Linux distribution, a Nios II/f-based processor-system reference design, and a BSP for the Altera Cyclone III FPGA Development Kit are available from Wind River.
Wind River's Linux solution for the Nios II processor is based on Linux 2.6 kernel technology, the GNU 4 tool chain and the Eclipse-based Wind River Workbench Development Suite, customised for the Nios II instruction set, the processor architecture and the custom instructions feature that can be implemented in the FPGA fabric to increase system performance.
"Together, Altera and Wind River have brought Linux support to the Nios II embedded processor on FPGAs," said Mike Langlois, general manager of networking solutions at Wind River. "Our customers can leverage a flexible hardware and software solution to create and bring to market faster, highly differentiated systems. The fact that the Nios II processor can run on all of Altera's FPGAs and HardCopy ASICs to enable a broad spectrum of solutions is well-matched to the needs of our customers who are looking to differentiate on price and performance."
A reference design based on the low cost Cyclone III FPGA provides a fully timing-constrained and performance-optimized processor subsystem design with a Nios II/f core and a number of common system peripherals such as Ethernet, timer and UART. A matching board support package (BSP) and a pre-built Linux kernel for this hardware platform give application developers a familiar and stable environment to jumpstart their application development effort. The same processor system reference design can target any FPGA or HardCopy ASIC in Altera's product portfolio.
"As more customers adopt FPGA platforms to create product differentiation in ever bigger and more sophisticated systems, their software development needs increase and evolve," said Danny Biran, senior vice president of product and corporate marketing at Altera. "Our relationship with Wind River provides us with a partner who can support the broad and diverse needs of our global customers, and whose breath and depth of software expertise complements our hardware expertise."
The Linux distribution, a Nios II/f-based processor-system reference design, and a BSP for the Altera Cyclone III FPGA Development Kit are available from Wind River.
Wittenstein moves open source to microcontrollers...
Wittenstein High Integrity Systems has launched a fully integrated version of its OpenRTOS kernel with USB and FAT file system capability to reduce development times.
The real time OS, based on the FreeRTOS but with support, is designed to run efficiently on the new generation of small and medium 32bit microcontrollers, with the initial release supporting the NXP LPC2xxx, ARM 7 and Freescale Coldfire V2 architectures. The product shortens development time for applications using USB or flash memory considerably.
OpenRTOS CONNECT is a high performance middleware platform based on, and compatible with, FreeRTOS, the world’s favourite open-source microcontroller RTOS, which has a large, rapidly growing embedded developer community. Users are able control costs, developing projects on the free kernel and migrating to OpenRTOS later in the development cycle. OpenRTOS is commercially licensed and supported, easy to use, memory efficient and optimised for 32-bit controllers.
It provides a full featured FAT 12/16/32 based, DOS compatible file system designed for embedded applications requiring PC compatible media, for example SD and other common flash based devices. A lightweight file system version is also available for configurations with limited resources. The USB host, device and class drivers support all four USB transfer types and enables the development of embedded applications fully compliant with USB 1.1 and USB 2.0.
The real time OS, based on the FreeRTOS but with support, is designed to run efficiently on the new generation of small and medium 32bit microcontrollers, with the initial release supporting the NXP LPC2xxx, ARM 7 and Freescale Coldfire V2 architectures. The product shortens development time for applications using USB or flash memory considerably.
OpenRTOS CONNECT is a high performance middleware platform based on, and compatible with, FreeRTOS, the world’s favourite open-source microcontroller RTOS, which has a large, rapidly growing embedded developer community. Users are able control costs, developing projects on the free kernel and migrating to OpenRTOS later in the development cycle. OpenRTOS is commercially licensed and supported, easy to use, memory efficient and optimised for 32-bit controllers.
It provides a full featured FAT 12/16/32 based, DOS compatible file system designed for embedded applications requiring PC compatible media, for example SD and other common flash based devices. A lightweight file system version is also available for configurations with limited resources. The USB host, device and class drivers support all four USB transfer types and enables the development of embedded applications fully compliant with USB 1.1 and USB 2.0.
... as it ports SafeRTOS to highly integrated Luminary controller
Wittenstein High Integrity Systems has ported its SafeRTOS embedded kernel to the Luminary Micro Stellaris ARM Cortex-M3™-based microcontrollers, including the new highly integrated LM3S9000 series.
The release by Wittenstein enables high integrity application development on the ‘most integrated’ embedded microcontrollers on the market. The product greatly reduces the time and risk associated with obtaining FDA510(k) and IEC61508 certification through Wittenstein’s Design Assurance Pack.
Developed specifically for applications such as medical and industrial devices, SafeRTOS has been independently certified by TÜV SÜD, as having been developed in compliance with IEC61508 SIL3, and uses a compiler independent methodology.
SafeRTOS, a finalist at the Elektra Awards 2008 Embedded Product of the Year, was originally developed from the popular and robust open source kernel, FreeRTOS. Migration from FreeRTOS to SafeRTOS enables costs to be controlled during development.
Luminary Micro’s Chief Marketing Officer Jean Anne Booth said, “Stellaris microcontrollers are widely used in medical and industrial devices, and we are seeing a growing demand for certification in these markets. The launch by Wittenstein vastly simplifies what can otherwise be a complex task.”
Discussing the forthcoming announcement, FreeRTOS creator and Wittenstein’s Head of Innovation, Richard Barry, said, “Luminary is an exciting innovator in the ARM space and we are delighted about this early collaboration on the new flagship Stellaris microcontrollers.”
The release by Wittenstein enables high integrity application development on the ‘most integrated’ embedded microcontrollers on the market. The product greatly reduces the time and risk associated with obtaining FDA510(k) and IEC61508 certification through Wittenstein’s Design Assurance Pack.
Developed specifically for applications such as medical and industrial devices, SafeRTOS has been independently certified by TÜV SÜD, as having been developed in compliance with IEC61508 SIL3, and uses a compiler independent methodology.
SafeRTOS, a finalist at the Elektra Awards 2008 Embedded Product of the Year, was originally developed from the popular and robust open source kernel, FreeRTOS. Migration from FreeRTOS to SafeRTOS enables costs to be controlled during development.
Luminary Micro’s Chief Marketing Officer Jean Anne Booth said, “Stellaris microcontrollers are widely used in medical and industrial devices, and we are seeing a growing demand for certification in these markets. The launch by Wittenstein vastly simplifies what can otherwise be a complex task.”
Discussing the forthcoming announcement, FreeRTOS creator and Wittenstein’s Head of Innovation, Richard Barry, said, “Luminary is an exciting innovator in the ARM space and we are delighted about this early collaboration on the new flagship Stellaris microcontrollers.”
OpenVPX looks to overcome interoperability issues
An alliance of defence prime contractors and embedded computing systems suppliers has opened membership to its Technical Working Group to form the OpenVPX Industry Working Group.
The group was set up to tackle system-level interoperability issues associated with the VPX (VITA 46) family of specifications. VPX is one of the 'successor' specifications to VME and VME64 but unlike these is still suffering from interoperability issues between different manufacturers.
Although the group is hosted by Mercury Computer Systems, one of the leading users and developers of VPX, any COTS defense contractor or embedded computing supplier that is in good standing with the VITA Standards Organization (VSO), and is committed to the OpenVPX Industry Working Group’s mission and aggressive schedule for completion of a system specification, is invited to apply for membership to the Technical Working Group.

The VPX (VITA 46) roadmap
“The overwhelming response to this initiative exceeded our expectations, and we’re delighted to open enrollment to the Technical Working Group,” said Ian Dunn, CTO, Mercury Computer Systems.
“The Boeing Company supports the OpenVPX initiative as part of our ongoing efforts to work with the industry to develop standards that promote the interoperability of systems and assemblies,” said Jim Robles, Boeing Senior Technical Fellow. “We welcome the opportunity to work with LSIs and vendors of VPX products in this effort."
“GE Fanuc has long been committed to the VPX architecture and to its potential to revolutionize military embedded computing, and we very much welcome this initiative that will lower the risk of adoption of VPX systems, expand the market and accelerate deployment,” said Jim Berlin, CTO, Embedded Systems, GE Fanuc Intelligent Platforms. “We’re looking forward to building on the charter set at our first meeting, and moving ahead to complete a system specification in order to provide the necessary top-down, system-level design guidance.”
Once the OpenVPX system specification is transitioned into VITA, the Working Group will disband.
The group was set up to tackle system-level interoperability issues associated with the VPX (VITA 46) family of specifications. VPX is one of the 'successor' specifications to VME and VME64 but unlike these is still suffering from interoperability issues between different manufacturers.
Although the group is hosted by Mercury Computer Systems, one of the leading users and developers of VPX, any COTS defense contractor or embedded computing supplier that is in good standing with the VITA Standards Organization (VSO), and is committed to the OpenVPX Industry Working Group’s mission and aggressive schedule for completion of a system specification, is invited to apply for membership to the Technical Working Group.
The VPX (VITA 46) roadmap
“The overwhelming response to this initiative exceeded our expectations, and we’re delighted to open enrollment to the Technical Working Group,” said Ian Dunn, CTO, Mercury Computer Systems.
“The Boeing Company supports the OpenVPX initiative as part of our ongoing efforts to work with the industry to develop standards that promote the interoperability of systems and assemblies,” said Jim Robles, Boeing Senior Technical Fellow. “We welcome the opportunity to work with LSIs and vendors of VPX products in this effort."
“GE Fanuc has long been committed to the VPX architecture and to its potential to revolutionize military embedded computing, and we very much welcome this initiative that will lower the risk of adoption of VPX systems, expand the market and accelerate deployment,” said Jim Berlin, CTO, Embedded Systems, GE Fanuc Intelligent Platforms. “We’re looking forward to building on the charter set at our first meeting, and moving ahead to complete a system specification in order to provide the necessary top-down, system-level design guidance.”
Once the OpenVPX system specification is transitioned into VITA, the Working Group will disband.
Tuesday, October 07, 2008
Portable Multimedia blog starts
The embedded blog has been static for too long, and will be starting up again soon with regular input on the embedded market but with a sharper focus on embedded hardware technology.
At the same time a new blog has spun out to cover the portable multimedia market, taking the embedded hardware and software for portable systems from mobile phones to portable Internet devices and the middleware that makes them run, and adding the applications and operator perspective for a more complete, vertical analysis.
Please have a look at the beta of the PortableMultimediaBlog and let me know what you think, and keep coming back for the latest news and analysis for the embedded market here at the Embedded Blog.
At the same time a new blog has spun out to cover the portable multimedia market, taking the embedded hardware and software for portable systems from mobile phones to portable Internet devices and the middleware that makes them run, and adding the applications and operator perspective for a more complete, vertical analysis.
Please have a look at the beta of the PortableMultimediaBlog and let me know what you think, and keep coming back for the latest news and analysis for the embedded market here at the Embedded Blog.
Tuesday, January 08, 2008
Pansonic shows 150in plasma screen
It's the Consumer Electronics Show again, and this year Panasonic is pushing the size of its HD plasma screen to 150inches! It is also likely to be selling fro roughly the same price (£50,000) as last year's 103in version. But this is going to need some high class content, or be viewed from quite a long way away!
Thursday, January 03, 2008
Fuel cells and virtual network computing show polar bears
Photo: © R & C Buchanan Virtual Network Computing (VNC) embedded technology from a company in Cambridge has been used to control and maintain a network of remote cameras in Canada to track the movement and behaviour of polar bears.
The project used an IP-based network system of digital microwave links to transmit images across the tundra from Cape Churchill cameras to the remote town of Churchill, which was in turn connected to the control centre in Alaska via the Internet. The work also involved a Tundra Buggy that fed live Polar Bear Cam streaming video through a 45MB wireless link to the town of Churchill and then to the National Geographic website.
The system was set up by SeeMore Wildlife Systems that specializes in remote wildlife monitoring solutions, to help researchers from Polar Bears International researchers from the University of Florida to film the dwindling number of polar bears as they prepared to head off to the Arctic for the winter.
"As the cameras were unmanned and powered by methanol fuel cells, it would have been virtually impossible to keep the system running without using VNC," said wildlife filmmaker Daniel Zatz of SeeMore Wildlife Systems. "VNC provided full control and monitoring of the camera network and remote PC server in Churchill from the relative warmth and luxury of project HQ in Alaska."
One of the benefits of realVNC is that it works with virtually any platform or operating system across any network, using just a simple downloadable interface or through a browser. This meant that Zatz and his team could log in, manage the network and download images directly from a PC, Mac or even handheld device.
The VNC technology comes from RealVNC in Cambridge which was originally developed in the AT&T labs in the City under Porf Andy Hopper. With over 100 million software downloads, VNC is a de facto standard for remote control and has been used widely in hundreds of different products and applications, from helpdesks to virtualization.
RealVNC has broadened the scope for VNC software by founding Adventiq to design semiconductors and software for sending keyboard, video and mouse (KVM) signals via IP networks market. Products containing Adventiq chips and embedded VNC software are already on the market.
Wednesday, January 02, 2008
Handheld projectors start emerging

The problem of displaying information from ever smaller devices has been a major headache fro several years. Micromachined technology such as Texas Instruments' Digital Light Processor (DLP) have driven down the size of projectors to just-about-handheld (see previous stories) and now a new venture is tackling the same market.
Microvision of Redmond, Washington has developed a prototype of a truly handheld, battery powered projector (right) for mobile phones and personal media players that goes on show at the CES consumer electronics show next week (Jan 7th), although production is planned for the end of the year.
Code-named SHOW, Microvision's pico projector uses a single micromachined mirror (rather than TI's array of mirrors) and laser scanning to get the size down to 7mm thick and keep the power down. The images projected can range anywhere from 12 inches (30 cm) to 100 inches (2.5 m) in size depending upon the projection distance and are always in focus. The production version of the device is expected to offer approximately 2.5 hours of continuous battery life, sufficient to watch a full-length movie without a need for recharging.
Microvision says that SHOW can project a widescreen, WVGA (848 X 480 pixels), DVD quality image, compared to other miniature projectors that typically only offer QVGA resolution (320 x 240 pixels). The technology is already being used for a head-up display in development for cars.
"While mobile multi-media subscription services are on the rise, handset manufacturers, content providers and service providers view tiny cell phone displays as a barrier to stronger consumer adoption of their products and services,” said Alexander Tokman, President and Chief Executive Officer of Microvision. "SHOW is a significant milestone for Microvision and is proof that our technology is maturing according to plan and is close to being market-ready. Microvision's low-profile and low-power design, supported by leading supply chain partners, is very attractive to numerous mobile handset device manufactures, carriers and content providers. We believe that this milestone is meaningful not only for our company but for the industry at large," he said.
Wednesday, December 19, 2007
Shake up in the set top box business
Philips has sold its set top box and connectivity business to Pace Micro Technology of the UK in a move that will help Pace achieve the scale that it needs to compete effectively in global markets. The company has been struggling in recent years, although it has a stream of contracts from the US.
The deal also includes the connectivity business, and Pace has been a leader in this area aiming to integrate the connectivity around the home into the set top box to help maintain margins and prevent the business moving to low cost Chinese suppliers.
Philips agreed in principle to divest the STB and CS businesses to Pace in exchange for 70 million Pace shares. The proposed transaction is subject to approvals from Pace shareholders, the relevant regulatory authorities and Philips' workers council. After completion, Philips will become a 23% shareholder in the combined business, representing a market value of around £60m.
The outcome of the transaction will result in a combination of strengths of two leading players in the industry, creating one of the largest set-top-box players in the world at a time when the shift from analogue to digital TV is rapidly increasing. Commenting on the sale, Philippe Alcaras, Business Unit leader Philips Home Networks said: "We feel that the rapidly changing dynamics of the markets in which the STB and CS businesses operate will inevitably culminate in further industry consolidation. By striking a deal with Pace now, we gain the first-mover advantage and it shows Philips' determination to secure a leading role for our businesses, and make them even more relevant to our customers and technology partners."
The two businesses had estimated sales of EUR 425 million in 2007 and employed 335 people, predominantly based in France, who would transfer to Pace as part of the transaction. The remainder of Home Networks, Home Communications, which includes Internet Telephony and Home Telephony (DECT), will become part of the Peripherals & Accessories unit within Philips' Consumer Lifestyle sector.
The deal also includes the connectivity business, and Pace has been a leader in this area aiming to integrate the connectivity around the home into the set top box to help maintain margins and prevent the business moving to low cost Chinese suppliers.
Philips agreed in principle to divest the STB and CS businesses to Pace in exchange for 70 million Pace shares. The proposed transaction is subject to approvals from Pace shareholders, the relevant regulatory authorities and Philips' workers council. After completion, Philips will become a 23% shareholder in the combined business, representing a market value of around £60m.
The outcome of the transaction will result in a combination of strengths of two leading players in the industry, creating one of the largest set-top-box players in the world at a time when the shift from analogue to digital TV is rapidly increasing. Commenting on the sale, Philippe Alcaras, Business Unit leader Philips Home Networks said: "We feel that the rapidly changing dynamics of the markets in which the STB and CS businesses operate will inevitably culminate in further industry consolidation. By striking a deal with Pace now, we gain the first-mover advantage and it shows Philips' determination to secure a leading role for our businesses, and make them even more relevant to our customers and technology partners."
The two businesses had estimated sales of EUR 425 million in 2007 and employed 335 people, predominantly based in France, who would transfer to Pace as part of the transaction. The remainder of Home Networks, Home Communications, which includes Internet Telephony and Home Telephony (DECT), will become part of the Peripherals & Accessories unit within Philips' Consumer Lifestyle sector.
Monday, November 05, 2007
It’s the tools, stupid! Microchip moves to 32bit with MIPS
Low cost microcontroller maker Microchip is moving to 32bits using the M4K architecture from MIPS Technologies.
This is a key move for both Microchip, whose PIC 8bit and 16bit microcontrollers are used in millions of places, and for MIPS, that has been missed in the early coverage of the story.
The key is the tools environment. Microchip gets a ready made ecosystem of debuggers and simulators, all of which are much more important in the 32bit space as the point of going to 32bits is to use off the shelf operating systems and readily available protocol stacks etc. These are all available for MIPS already, which is a stunning advantage for Microchip.
But there is also a huge benefit for MIPS, as there is now a tremendous potential installed base of designers who want to use Microchip controllers. This will work in two ways – it encourages and further strengthens the ecosystem and tool development as there are now hundreds of thousands of potential customers for the third party embedded software developers and for the tool vendors. Suddenly the MIPS ecosystem is now hugely viable. That plays into MIPS’ system on chip market, as a successful Microchip design can go to a single chip custom ASIC chip or semi-custom ASSP chip without changing the application software, providing an easier route to lower costs and higher volumes.
Microchip is using the M4K low end variant of the MIPS architecture which was announced last week along with a wide range of analogue peripherals to go around the core from MIPS' earlier acquisition of ChipIdea.
Industry comment to follow……
This is a key move for both Microchip, whose PIC 8bit and 16bit microcontrollers are used in millions of places, and for MIPS, that has been missed in the early coverage of the story.
The key is the tools environment. Microchip gets a ready made ecosystem of debuggers and simulators, all of which are much more important in the 32bit space as the point of going to 32bits is to use off the shelf operating systems and readily available protocol stacks etc. These are all available for MIPS already, which is a stunning advantage for Microchip.
But there is also a huge benefit for MIPS, as there is now a tremendous potential installed base of designers who want to use Microchip controllers. This will work in two ways – it encourages and further strengthens the ecosystem and tool development as there are now hundreds of thousands of potential customers for the third party embedded software developers and for the tool vendors. Suddenly the MIPS ecosystem is now hugely viable. That plays into MIPS’ system on chip market, as a successful Microchip design can go to a single chip custom ASIC chip or semi-custom ASSP chip without changing the application software, providing an easier route to lower costs and higher volumes.
Microchip is using the M4K low end variant of the MIPS architecture which was announced last week along with a wide range of analogue peripherals to go around the core from MIPS' earlier acquisition of ChipIdea.
Industry comment to follow……
Monday, October 01, 2007
Plastic TV comes to the market
Sony is reported to be ready to launch the world's first TV based on OLED light emitting plastic polymer technology at the beginning of December in Japan.
The value is that it is thin - just 3mmm thick. The problem is that it is small and expensive - only 11 inches and Y20,000, or just under £1000 (and even then the suggestion is that this is a loss). So it will fit a niche market where light and thin really, really matters - so as a panel on high end consumer systems of all sorts, in luxury kitchens, on portable equipment, that sort of thing. The trouble is to drive enough volume to get the price down and to get the size of the panels up so that it is truly a consumer proposition - and that means above 20in for that same £1000 price point (even for PC monitors it needs to be 17in). That will be a struggle, even for Sony, and a lot more investment required.
The value is that it is thin - just 3mmm thick. The problem is that it is small and expensive - only 11 inches and Y20,000, or just under £1000 (and even then the suggestion is that this is a loss). So it will fit a niche market where light and thin really, really matters - so as a panel on high end consumer systems of all sorts, in luxury kitchens, on portable equipment, that sort of thing. The trouble is to drive enough volume to get the price down and to get the size of the panels up so that it is truly a consumer proposition - and that means above 20in for that same £1000 price point (even for PC monitors it needs to be 17in). That will be a struggle, even for Sony, and a lot more investment required.
Sunday, September 16, 2007
A digital instrument for the 21st century
What would an instrument designed for digital music look like? That question has been bothering Japanese media artist Toshio Iwai since 1985, and his vision has finally come true with the worldwide launch in the UK of Tenori-On.
This is a 16 x 16 grid of buttons lit by white LEDs that produces a range of 253 synthesized 'voices', half from Yamaha's existing synthesisers and half specially developed for the system. The basic array plots pitch vs time, but there are 16 layers for different, complex ways to manipulate sounds and the array also displays the notes as they play. One of these includes the ability to rotate the notes while maintaining their relationship in time (see videos below for more examples).
"In the digital age the problem of developing a musical instrument is one of developing a unique shape like a piano or saxophone has a unique shape," said Iwai. "The problem is that in the digital world everything is inside a black box and you can't get the physical feeling from that digital world. The new musical instrument for the 21st century has to have a relationship between shape, sound and interface and these have to match beautifully."
He has been working with Yamaha to turn it into a product for the last four years. Th £599 instrument is only available in the UK as the test market through 8 record shops, including Rooted Records in Bristol, as well as being sampled by South West music guru Peter Gabriel.
Monday, September 03, 2007
IBM stumbles onto single molecule switching

IBM nanotech researchers have stumbled onto something that may make a significant difference to the design and manufacture of logic devices in the future.
Researchers looking at the vibration of the Naphthalocyanine molecule found that they could use two hydrogen atoms in the organic molecule to switch states, providing an 1 or a 0. They have tried with many other molecules but previously it always changes shape which makes the switch unreliable.
“One of the beauties of doing exploratory science is that by researching one area, you sometimes stumble upon other areas of major significance,” said Gerhard Meyer, senior researcher in the nanoscale science group at the IBM Zurich lab. “Although the discovery of this breakthrough was accidental, it may prove to be significant for building the computers of the future.”
In the paper titled “Current-Induced Hydrogen Tautomerization and Conductance Switching of Naphthalocyanine Molecules,” in the US journal Science, IBM researchers describe the switching, and are saying that these molecular switches could one day lead to computer chips with speeds as fast as today's fastest supercomputers, but much smaller in size; with some speculating even building computer chips so small they could be the size of a speck of dust or fit on the tip of a needle.
The next step is to build a series of these molecules into a circuit, then figure out how to network those together into a molecular chip.
However, the trick is to propagate the state through multiple molecules to build logic gates where one molecule influences another, and that is difficult. I would also be surprised if this could be done at the kinds of speeds researchers are talking about and that the industry needs. Plus, this is an organic molecule and sensitive to heat, so there are many environmental issues to be tackled before we are anywhere near building computers out of single molecules of Naphthalocyanine.
Thursday, August 30, 2007
Graceful degradation in encoding

An interesting element of the recent launch of a family of SD video codec cores from ARC is the use of 'graceful degradation' in the encoding process.
Depending on the resources available - and that can be power or memory - the cores can throw out various tools and reduce the quality of the encoding to extend the battery life or the recording time - this is all up to the designer and allows systems based on the cores to be differentiated through these engineering tradeoffs.
The five cores are based on the recently introduced VRaptor Multicore Architecture, each is programmable, encodes and decodes a wide range of popular video standards, and comes with optimized media processing elements including:
o Up to two 128-bit SIMD Media Processors
o A dual-channel media-optimized DMA engine
o Separate multi-standard encoding and decoding accelerators
o Programmable motion estimation accelerator
o SoC development tools
o Optimized video codecs:
o (encoders) H.264 BP, MPEG-4 SP/ASP, H.263 profile 0, and JPEG
o (decoders) H.264 BP, MPEG-4 SP/ASP, H.263 profile 0, VC-1 SP, MPEG-2 MP, MJPEG, JPEG, GIF, TIFF, and PNG

All this is very interesting when video becomes a key IP block for the next decade.
Powering chips by body warmth

Researchers at the Fraunhofer Institute for Integrated Circuits IIS in Erlangen, Germany, have developed a way of harnessing natural body heat to generate electricity to power low voltage logic devices.
While this won't power a cell phone, medical sensors may be able to function without power from a wall socket. Instead, they will draw all the power they need from the warmth of the human body. The respective data will be sent by a radio signal to the central monitoring station.
The researchers, with collleagues at the Fraunhofer Institute for Physical Measurement Techniques IPM and the Fraunhofer Institute for Manufacturing Engineering and Applied Materials Research IFAM, are using thermoelectric generators, TEG for short, made from semiconductor elements that extract electrical energy simply from the temperature difference between a hot and a cold environment. Normally, a difference of several tens of degrees would be required in order to generate enough power, but the differences between the body’s surface temperature and that of its environment are only a few degrees.
“Only low voltages can be produced from differences like these,” said Peter Spies, manager of this sub-project at the IIS. A conventional TEG delivers roughly 200 millivolts, but electronic devices require at least one or two volts. “We combined a number of components in a completely new way to create circuits that can operate on 200 millivolts,” says Spies. “This has enabled us to build entire electronic systems that do not require an internal battery, but draw their energy from body heat alone.”
Thursday, August 23, 2007
VIA ships 1W x86 processor

To tackle deeply embedded and power sensitive applications, VIA has launched a 500MHz x86 processor that runs at under 1W.
The Eden ULV processor has been designed from the ground up to meet the low power requirements of a wide range of industrial, commercial and ultra mobile applications and has an idle power of 100mW.The 1W power level allows a 21mm x 21mm NanoBGA2 package to be used for more space sensitive applications.
The new processor can be combined with the ultra compact VIA CX700/M system media processor, an advanced all-in-one digital media chipset with a maximum operating power of just 3.5 watts, supporting a wide range of multimedia, connectivity and storage options and enabling system platforms with a maximum power of less than 10 watts.
It is being used by:
AAEON, Acrosser, Adlink, Advansus, Advantech, Aquila, Arbor, Avalue, Axiomtek, Biostar, Bona, Boser, Commate, E-TOP, Flexus, Freetech, Ibase, IEI, Inhand, IPOX, Kontron, Lanner, Liantec, Maple, Nexcom, Posiflex, Portwell, Termtek, Unication and Unicorn.
“With a maximum power of just 1W, the 500MHz VIA Eden ULV processor has finally brought x86 design into the realm of the embedded market,” said Richard Hung, Product Manager at Advantech. “This remarkably low power consumption has allowed our new PCM-4372 to provide all the power, performance and versatility of the x86 architecture to our customers.”
“The 500MHz VIA Eden ULV was the logical choice for our new 5.25” SBC, EBM-CX700 and B5 size slim PC, the ASM-CX700,” said Sam Wang, Vice-President of Avalue. “Now that VIA has brought to market an x86-based processor that doesn’t have the prohibitively high power consumption of other offerings, the benefits in terms of versatility, availability of compatible software and hardware, and performance can’t be overlooked.”
Integrated into the processor is the VIA StepAhead Technology Suite, which boasts an extensive array of performance-enhancing features including the VIA V4 bus at 400MHz, sixteen pipeline stages, branch prediction and an efficiency-enhanced 128KB full-speed exclusive L2 cache, ensuring the processor’s low power consumption doesn’t come at the expense of performance.
It also integrates VIA's PadLock Security Engine security tools to enable real-time military-grade encryption of data such as AES encryption, Secure Hash Algorithm SHA-1 and SHA-256, and a Montgomery Multiplier to accelerate the encryption process used under RSA and other public key transmissions as well as NX Execute Protection to prevent worms from propagating, and dual quantum based random number generators.
“Giving our customers the building blocks to create innovative systems and driving PC technology into new markets defines our ‘Small is Beautiful’ strategy,” said Richard Brown, Vice President of Corporate Marketing, VIA Technologies, Inc. “With its performance, energy efficiency and compact size, our new VIA Eden ULV processor provides a way for embedded developers to add real value to their systems and push the market forward.”
Tuesday, August 21, 2007
LSI shakeout continues with Infineon deal
The transformation of LSI Logic has settled down with the last remaining element - the GSM chip business - sold off to Infineon Technologies for what looks like a knock down price.
The E330m (£235m) deal is expected to close in Q4 and is for roughly the same as the project sales this year (the first six months saw sales of E150m), and Infineon expects a clearly positive EBITA contribution in 2008.
The 700 strong Mobility Products Group came from the April 2007 acquisition of Agere, and includes a design team and sales and marketing operation in Bracknell in the UK. Whether this becomes a standalone group for Infineon or merges with the Infineon design group in Bristol remains to be seen.
Another question is what this means for the comms element of the BlueOnyx strategy of a mobile server - that relied heavily on the Bluetooth and GSM element that came from the Mobility group, coupled with the storage capabilities of LSI. But buying in modules from a stronger player such as Infineon should not be a problem.
“Infineon’s strong commitment to the mobility market will ensure our customers continuity of the LSI product line, ongoing customer support and a broader portfolio of solutions to address their needs,” said Abhi Talwalkar, LSI president and chief executive officer. “LSI is fully committed to work with Infineon to provide a seamless transition for customers.”
Following the carve-out of Qimonda in 2006, Infineon is focusing on three key areas of business: Energy Efficiency, Communications and Security, having acquired Texas Instruments’ DSL CPE business earlier this year. In the Communication Solutions segment, Infineon has picked up new customers including Nokia, LG-Electronics, Panasonic and Samsung.
The E330m (£235m) deal is expected to close in Q4 and is for roughly the same as the project sales this year (the first six months saw sales of E150m), and Infineon expects a clearly positive EBITA contribution in 2008.
The 700 strong Mobility Products Group came from the April 2007 acquisition of Agere, and includes a design team and sales and marketing operation in Bracknell in the UK. Whether this becomes a standalone group for Infineon or merges with the Infineon design group in Bristol remains to be seen.
Another question is what this means for the comms element of the BlueOnyx strategy of a mobile server - that relied heavily on the Bluetooth and GSM element that came from the Mobility group, coupled with the storage capabilities of LSI. But buying in modules from a stronger player such as Infineon should not be a problem.
“Infineon’s strong commitment to the mobility market will ensure our customers continuity of the LSI product line, ongoing customer support and a broader portfolio of solutions to address their needs,” said Abhi Talwalkar, LSI president and chief executive officer. “LSI is fully committed to work with Infineon to provide a seamless transition for customers.”
Following the carve-out of Qimonda in 2006, Infineon is focusing on three key areas of business: Energy Efficiency, Communications and Security, having acquired Texas Instruments’ DSL CPE business earlier this year. In the Communication Solutions segment, Infineon has picked up new customers including Nokia, LG-Electronics, Panasonic and Samsung.
Friday, August 10, 2007
NI makes LabView multicore....
Embedded software tool vendor National Instruments has developed a multi-core version of its LabView graphical programming tool for the x86 architecture.
LabView 8.5 adds multicore support for PCs, embedded boards based on X86 processors and FPGA development systems. Running threads across multiple cores is allowing significant speed up of applications developed on the PC, such as test systems.
More importantly for embedded designed, NI has also made its real time operating system multi-core aware so that processes can be allocated to individual cores either manually or automatically to make the most of the system resources.
“Engineers and scientists depend on continually improving PC processors, operating systems and bus technologies to drive increased performance in their measurement and control systems,” said Dr. James Truchard, President, CEO and co-founder of National Instruments. “With the shift toward multicore processors on the PC, LabVIEW programmers benefit from a simplified graphical approach to multithreading, making it possible for engineers and scientists to maximise the performance of multicore technology with little to no change to their applications.”
With the parallel dataflow language of LabVIEW, users can easily map their applications to multicore and FPGA architectures for data streaming, control, analysis and signal processing. Building on the automatic multithreading capability of earlier versions, LabVIEW 8.5 scales user applications based on the total available number of cores and delivers enhanced thread-safe drivers and libraries to improve throughput for RF, high-speed digital I/O and mixed-signal test applications.
LabVIEW 8.5 also provides symmetric multiprocessing (SMP) with the LabVIEW Real-Time environment where designers of embedded and industrial systems automatically can load balance tasks across multiple cores without sacrificing determinism. With the latest version of LabVIEW, users can manually assign portions of code to specific processor cores to fine-tune real-time systems or isolate time-critical sections of code on a dedicated core. To meet the more challenging debugging and code optimisation requirements of real-time multicore development, engineers and scientists can use the new NI Real-Time Execution Trace Toolkit 2.0 to visually display timing relationships between sections of their code and the individual threads and processing cores where the code is executing.
The inherent parallelism of LabVIEW maps onto FPGA applications as well with an FPGA Project Wizard that automates I/O configuration, IP development and overall setup for common I/O, counter/timer and encoder applications. Using the FPGA Project Wizard, engineers and scientists can automate the generation of more complex high-speed DMA data transfer code. Additionally, LabVIEW 8.5 offers multichannel filtering and PID control functions commonly needed in machine automation to significantly reduce FPGA resources for high-channel-count applications.
LabView 8.5 adds multicore support for PCs, embedded boards based on X86 processors and FPGA development systems. Running threads across multiple cores is allowing significant speed up of applications developed on the PC, such as test systems.
More importantly for embedded designed, NI has also made its real time operating system multi-core aware so that processes can be allocated to individual cores either manually or automatically to make the most of the system resources.
“Engineers and scientists depend on continually improving PC processors, operating systems and bus technologies to drive increased performance in their measurement and control systems,” said Dr. James Truchard, President, CEO and co-founder of National Instruments. “With the shift toward multicore processors on the PC, LabVIEW programmers benefit from a simplified graphical approach to multithreading, making it possible for engineers and scientists to maximise the performance of multicore technology with little to no change to their applications.”
With the parallel dataflow language of LabVIEW, users can easily map their applications to multicore and FPGA architectures for data streaming, control, analysis and signal processing. Building on the automatic multithreading capability of earlier versions, LabVIEW 8.5 scales user applications based on the total available number of cores and delivers enhanced thread-safe drivers and libraries to improve throughput for RF, high-speed digital I/O and mixed-signal test applications.
LabVIEW 8.5 also provides symmetric multiprocessing (SMP) with the LabVIEW Real-Time environment where designers of embedded and industrial systems automatically can load balance tasks across multiple cores without sacrificing determinism. With the latest version of LabVIEW, users can manually assign portions of code to specific processor cores to fine-tune real-time systems or isolate time-critical sections of code on a dedicated core. To meet the more challenging debugging and code optimisation requirements of real-time multicore development, engineers and scientists can use the new NI Real-Time Execution Trace Toolkit 2.0 to visually display timing relationships between sections of their code and the individual threads and processing cores where the code is executing.
The inherent parallelism of LabVIEW maps onto FPGA applications as well with an FPGA Project Wizard that automates I/O configuration, IP development and overall setup for common I/O, counter/timer and encoder applications. Using the FPGA Project Wizard, engineers and scientists can automate the generation of more complex high-speed DMA data transfer code. Additionally, LabVIEW 8.5 offers multichannel filtering and PID control functions commonly needed in machine automation to significantly reduce FPGA resources for high-channel-count applications.
… and NI adds state machine modelling tool
Statecharts are commonly used to design state machines to model the behaviour of real-time and embedded systems to depict event occurrences and responses for digital communication protocols, machine controllers and system-protection applications. LabVIEW 8.5 adds a new statechart module to help engineers and scientists design and simulate these event-based systems using familiar, high-level statechart notations based on the Unified Modeling Language (UML) standard.
Because the LabVIEW Statechart Module is based on the LabVIEW graphical programming language, engineers and scientists have a single platform to design, prototype and deploy their systems quickly, combining familiar statechart notation with real-world I/O running on deterministic real-time or
FPGA-based systems.
Because the LabVIEW Statechart Module is based on the LabVIEW graphical programming language, engineers and scientists have a single platform to design, prototype and deploy their systems quickly, combining familiar statechart notation with real-world I/O running on deterministic real-time or
FPGA-based systems.
While this is not a move into full blown requirements capture and system modelling, it is a response to the recent acquisition of embedded UML tool provider Telelogic by IBM Rational. IBM is more focussed on the system and web software development, rather than embedded, and NI expects to pick up customers who used the I-logix state machine tool that was bought by Telelogic and so is now part of IBM Rational.
Monday, July 23, 2007
Infineon guns for Freescale in automotive engine control
Infineon Technologies is looking to take on Freescale Semiconductor's PowerPC chip in the engine management market in a move that is set to spark a price war.Infineon is looking for ways to make its TriCore embedded microcontroller even more cost effective as it continues to back the architecture, says Peter Bauer, head of the Automotive, Industrial and Multimedia (AIM) group and a member of Infineon's board of directors. AIM is the larger of the two groups in the company, bringing in 70% of the revenue.
"We will discover how low in cost we can get the TriCore," he said, sparking a potential price war."We believe we can bring TriCore to the lowest cost engine management designs."
This is set to spark a price war if Freescale competes in price to keep its market share, but will bring sophisticated engine management technology to a wider range of vehicles in lower price brackets.Bauer claims Infineon has 60% of engine management designs using TriCore. Infineon is currently the #2 automotive chip supplier in the world with a market share of 9.5%, behind Freescale's 11.2% (see global market right).
Intrinsity goes for low power with ARM variant...
High performance logic company Intrinisty has used its high speed logic on the ARM cortex R4 core, but instead of gong for the highest possible speed has gone for a low power option.
This is producing twice the clock speed possible with traditional logic, so the Cortex R4X core will run at 600MHz on TSMC's 65nm LP process. The processor implementations uses Intrinsity’s Fast14 1-of-N Domino Logic (NDL) technology, which enables faster circuit speeds while minimizing power consumption and area.
This may well be an admission of defeat for Intrinsity, which has had a high performance MIPS version since it started 10 years ago now, but moved to a licensing model in 2004 and includes both processors and high speed memory.
“Intrinsity FastCores incorporate Fast14 technology, and we use this to enable breakthrough embedded processor performance with very low power consumption,” said Bob Russo, CEO, Intrinsity. “By working closely with ARM on the development of the Cortex-R4X processor implementations, together we will be able to reach a much broader base of designers who are looking for ways to achieve higher performance without sacrificing power efficiency and bring new SoCs to market quickly.”
Moving to a low power approach makes sense for ARM, and the R4X is aimed at storage, printer and networking applications, so taking on MIPS which is more dominant in these areas.
“Mass storage, printing and networking applications need ever increasing levels of performance to handle higher data rates, more media services and new functionality such as encryption,” said Graham Budd, executive vice president and general manager, Processor Division at ARM. “Through this relationship we can extend the performance range of the Cortex-R4 processor to meet these requirements and those of new market domains.”
All versions of the Cortex-R4 processor offer embedded Error Correcting Code (ECC) technology which monitors memory accesses to detect and correct errors, providing very high reliability and availability.
ARM says the Cortex-R4X processor implementations are available for licensing immediately, but will be shipped in Q1 next year. Expect other versions to follow, and an Intrinsity version of the Cortex A8 (the A8X perhaps, but more likely the A9) would hit 1.8GHz and perhaps top 2GHz on a high performance process.
... and sets up acquisition prospect
This technology looks vital to ARM, so expect Intrinsity to be an acquisition target. While it has licensed the technology to ATI (now part of AMD) and has investment from PowerPC licensee AMCC, neither of these are a major stumbling block to being part of ARM and fits well with the processor and IP design philosophy. If this proves popular, and there is little reason why not, then ARM cannot afford NOT to buy it.
This is producing twice the clock speed possible with traditional logic, so the Cortex R4X core will run at 600MHz on TSMC's 65nm LP process. The processor implementations uses Intrinsity’s Fast14 1-of-N Domino Logic (NDL) technology, which enables faster circuit speeds while minimizing power consumption and area.
This may well be an admission of defeat for Intrinsity, which has had a high performance MIPS version since it started 10 years ago now, but moved to a licensing model in 2004 and includes both processors and high speed memory.
“Intrinsity FastCores incorporate Fast14 technology, and we use this to enable breakthrough embedded processor performance with very low power consumption,” said Bob Russo, CEO, Intrinsity. “By working closely with ARM on the development of the Cortex-R4X processor implementations, together we will be able to reach a much broader base of designers who are looking for ways to achieve higher performance without sacrificing power efficiency and bring new SoCs to market quickly.”
Moving to a low power approach makes sense for ARM, and the R4X is aimed at storage, printer and networking applications, so taking on MIPS which is more dominant in these areas.
“Mass storage, printing and networking applications need ever increasing levels of performance to handle higher data rates, more media services and new functionality such as encryption,” said Graham Budd, executive vice president and general manager, Processor Division at ARM. “Through this relationship we can extend the performance range of the Cortex-R4 processor to meet these requirements and those of new market domains.”
All versions of the Cortex-R4 processor offer embedded Error Correcting Code (ECC) technology which monitors memory accesses to detect and correct errors, providing very high reliability and availability.
ARM says the Cortex-R4X processor implementations are available for licensing immediately, but will be shipped in Q1 next year. Expect other versions to follow, and an Intrinsity version of the Cortex A8 (the A8X perhaps, but more likely the A9) would hit 1.8GHz and perhaps top 2GHz on a high performance process.
... and sets up acquisition prospect
This technology looks vital to ARM, so expect Intrinsity to be an acquisition target. While it has licensed the technology to ATI (now part of AMD) and has investment from PowerPC licensee AMCC, neither of these are a major stumbling block to being part of ARM and fits well with the processor and IP design philosophy. If this proves popular, and there is little reason why not, then ARM cannot afford NOT to buy it.
Tuesday, July 17, 2007
VOIP struggling?
What's happening with Voice over IP? Just as it is reaching the mass consumer consciousness, there's a blip. The second largest standalone VOIP service provider, SunRocket (no I'd never heard of them either but they've been running since 1994 in the US) has closed without warning, reports Associated Press. if this was a small operator, that wouldn't matter, but with 200,000 subscribers it is second only to Vonage.
Now who knows what the situation is (AP didn't) but the company fired Chief Technology Officer Mark Fedor and Chief Information Officer Robert Kramer at the end of June and then the chief financial officer, David Samuels, resigned on 2nd July - never a good sign! It has since laid off all 200 staff at its US call centre as well.
This might be mismanagement, or internal 'problems', but hopefully not a technology issue and just a blip on the growth curve. But remember that IPTV is a good five years behind VoIP in its technology development.
Now who knows what the situation is (AP didn't) but the company fired Chief Technology Officer Mark Fedor and Chief Information Officer Robert Kramer at the end of June and then the chief financial officer, David Samuels, resigned on 2nd July - never a good sign! It has since laid off all 200 staff at its US call centre as well.
This might be mismanagement, or internal 'problems', but hopefully not a technology issue and just a blip on the growth curve. But remember that IPTV is a good five years behind VoIP in its technology development.
Scalable video standard emerges
The electronics industry now has a global, open standard for scalable video that will allow the same bitstream to be used for many different devices and connections. This is potentially huge for the hardware, software and content industry as it can dramatically simplify the costs and implementation of providing video.
The Scalable Video Coding (SVC) standard has been developed by the MPEG Joint Video Team (JVT) in collaboration with the International telecommunications Union and provides scalable video with full compatibility of base layer information so that it can be decoded by existing AVC decoders.
The SVC design enables the creation of a video bitstream that is structured in layers so that devices can decode either the full bitstream or a subset of it with the removal of enhancement layers. Data remaining after the removal of enhancement layers is still decodable, and these scalability modes include higher frame rates, increase of picture resolution and higher quality.
Unlike previous scalable compression solutions, the compression efficiency of SVC is very high and hardly distinguishable from "single-layer" AVC codecs in most operation modes. Due to a novel design which re-uses major components of ordinary AVC decoders and runs only one motion compensation loop, the complexity increase for supporting the scalability features in decoders is kept to a minimum, so decoders supporting SVC will not face a significant cost penalty.
The standard is open and global, being approved as Amendment 3 of the Advanced Video Coding (AVC) standard ISO/IEC 14496-10 (also published as ITU-T Rec. H.264).
A new amendment to MPEG-2 Systems also enables the carriage of scalable video data within MPEG-2 program and transport streams, and this is moving to the PDAM (proposed draft amendment) ballot stage of the ISO/IEC approval process. This allows the more efficient AVC video to be carried over MPEG-2 streams for higher spatial or temporal resolution, or higher picture fidelity at the same resolution. One application would be to provide broadcasters with the ability to efficiently deploy premium services without affecting their existing customer base. Set-top boxes with 1080p50/60 SVC capability on top of the existing HD AVC formats can be shipped to premium customers without the need to replace existing HD AVC set-top boxes.
The Scalable Video Coding (SVC) standard has been developed by the MPEG Joint Video Team (JVT) in collaboration with the International telecommunications Union and provides scalable video with full compatibility of base layer information so that it can be decoded by existing AVC decoders.
The SVC design enables the creation of a video bitstream that is structured in layers so that devices can decode either the full bitstream or a subset of it with the removal of enhancement layers. Data remaining after the removal of enhancement layers is still decodable, and these scalability modes include higher frame rates, increase of picture resolution and higher quality.
Unlike previous scalable compression solutions, the compression efficiency of SVC is very high and hardly distinguishable from "single-layer" AVC codecs in most operation modes. Due to a novel design which re-uses major components of ordinary AVC decoders and runs only one motion compensation loop, the complexity increase for supporting the scalability features in decoders is kept to a minimum, so decoders supporting SVC will not face a significant cost penalty.
The standard is open and global, being approved as Amendment 3 of the Advanced Video Coding (AVC) standard ISO/IEC 14496-10 (also published as ITU-T Rec. H.264).
A new amendment to MPEG-2 Systems also enables the carriage of scalable video data within MPEG-2 program and transport streams, and this is moving to the PDAM (proposed draft amendment) ballot stage of the ISO/IEC approval process. This allows the more efficient AVC video to be carried over MPEG-2 streams for higher spatial or temporal resolution, or higher picture fidelity at the same resolution. One application would be to provide broadcasters with the ability to efficiently deploy premium services without affecting their existing customer base. Set-top boxes with 1080p50/60 SVC capability on top of the existing HD AVC formats can be shipped to premium customers without the need to replace existing HD AVC set-top boxes.
Linux version of Microsoft Surface touch table
An interview in Gizmodo is offering the potential for an open source version of the multi-touch user interface software that is key to Microsoft's $10,000 Surface table PC.
Developed by Peter Hutterer, a researcher in the Wearable Computers Lab at the University of South Australia, MPX or Multi-Pointer X is a modification of the X Windows Server that allows multiple input devices to be used at the same time.
The demo (above) links an MPX-enabled Linux system to a Mitsubishi Electric's DiamondTouch display table which can recognize four different unique users. The software is still in its early stages but shows significant promise, as an open source version will open up more application development, which is vital, and bring down the price of such systems, which is even better. Combined with the new touch technology from Hitachi Displays (below) and its ability to make large panels, there is definitely significant potential for this technology.
Developed by Peter Hutterer, a researcher in the Wearable Computers Lab at the University of South Australia, MPX or Multi-Pointer X is a modification of the X Windows Server that allows multiple input devices to be used at the same time.
The demo (above) links an MPX-enabled Linux system to a Mitsubishi Electric's DiamondTouch display table which can recognize four different unique users. The software is still in its early stages but shows significant promise, as an open source version will open up more application development, which is vital, and bring down the price of such systems, which is even better. Combined with the new touch technology from Hitachi Displays (below) and its ability to make large panels, there is definitely significant potential for this technology.
Friday, July 13, 2007
Nintendo aims to overtake Sony
The Wii is a great design and a lesson in providing what people want rather than the latest technology, but Nintendo is vulnerable to a downturn through being a one-trick company.
Nintendo is now aiming to overtake Sony's 120m-selling PlayStation2 - Nintendo sold 5.8 million units of the Wii by this March, and aims to sell another 14 million during the current business year to March 2008, which makes 20m this year, so it will take four to five years to beat the PS2. That's a long way off, and competition is fierce and Nintendo still hasn't sorted out it's production scheduling problems.
This just goes to show, rightly or wrongly, the madness and emotion of the stock market!
Tuesday, July 10, 2007
FIC launches Linux touchscreen phone
The Neo 1973 uses:
* 2.8" VGA TFT color display
* Touchscreen, usable with stylus or fingers (see the Hitachi story below)
* 266MHz Samsung System on a Chip (ARM-11 based SOC)
* USB 1.1, switchable between Client and Host (unpowered) - interesting!
* Integrated Assisted GPS
* 2.5G GSM – quad band, voice, CSD, GPRS
* Bluetooth 2.0
* Micro SD slot
* High Quality audio codec
This incarnation will not work as the applications are not available that the operators demand, but this is the start of a more open generation of mobile phones using Linux that will stimulate the eco-system of mobile phone applications (and viruses of course) and eventually drive down the costs of smartphones, but it will take many years! All credit to FIC for starting the ball rolling in a serious way, and these guys know how to manufacture in volume to a price!
Subscribe to:
Posts (Atom)